Next Article in Journal
Portevin-Le Châtelier Effect in a Powder Metallurgy Co-Ni-Based Superalloy
Next Article in Special Issue
PbSe Quantum Dot Doped Mode-Locked Fiber Laser
Previous Article in Journal
The Influence of Material Type and Hardness on the Number of Embedded Abrasive Particles during Airborne-Particle Abrasion
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Effects of Surfactants on Zein Cast Films for Simultaneous Delivery of Two Hydrophilic Active Components

1
School of Chemical Engineering and Materials Science, Quanzhou Normal University, Quanzhou 362000, China
2
Key Laboratory of Organosilicon Chemistry and Material Technology, College of Material, Chemistry and Chemical Engineering, Ministry of Education, Hangzhou Normal University, Hangzhou 311121, China
3
School of Pharmaceutical Sciences, Hainan University, Haikou 570228, China
4
School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640, China
*
Authors to whom correspondence should be addressed.
Materials 2022, 15(8), 2795; https://doi.org/10.3390/ma15082795
Submission received: 15 March 2022 / Revised: 4 April 2022 / Accepted: 8 April 2022 / Published: 11 April 2022
(This article belongs to the Special Issue New Advances in Photonic Materials and Devices)

Abstract

In order to prepare edible films with outstanding antimicrobials and antioxidants utilized in applications of food and pharmaceutics, in this study, effects of surfactants on zein cast films for simultaneous delivery of lysozyme (LY) and ascorbic acid (AA) were investigated, where sodium alginate (SA), soy lecithin (SL), and Pluronic f-68 (PF-68) were selected as surfactants. FT-IR tests indicated that SL or PF-68 dramatically changed secondary structure of zein composite films, which heightened the irregularity of the composite film and inhibited LY crystallization. Mechanical tests showed that highly flexible films exhibiting elongations between 129% and 157% were obtained when adding PF-68. Compared with the film without emulsifier, zein film containing SL and PF-68 showed approximately 7.51 and 0.55 times lower initial release rates for LY and AA respectively, which significantly improved the controlled release and heightened the anti-microbial and anti-oxidant activities of the film. Finally, emulsified mechanisms of the surfactants in zein films were proposed.
Keywords: zein; surfactant; lysozyme; ascorbic acid; controlled release; emulsified mechanism zein; surfactant; lysozyme; ascorbic acid; controlled release; emulsified mechanism
Graphical Abstract

Share and Cite

MDPI and ACS Style

Wei, D.; Zhou, F.; Wang, H.; Liu, G.; Fang, J.; Jiang, Y. Effects of Surfactants on Zein Cast Films for Simultaneous Delivery of Two Hydrophilic Active Components. Materials 2022, 15, 2795. https://doi.org/10.3390/ma15082795

AMA Style

Wei D, Zhou F, Wang H, Liu G, Fang J, Jiang Y. Effects of Surfactants on Zein Cast Films for Simultaneous Delivery of Two Hydrophilic Active Components. Materials. 2022; 15(8):2795. https://doi.org/10.3390/ma15082795

Chicago/Turabian Style

Wei, Dongwei, Fanhui Zhou, Hongdi Wang, Guijin Liu, Jun Fang, and Yanbin Jiang. 2022. "Effects of Surfactants on Zein Cast Films for Simultaneous Delivery of Two Hydrophilic Active Components" Materials 15, no. 8: 2795. https://doi.org/10.3390/ma15082795

APA Style

Wei, D., Zhou, F., Wang, H., Liu, G., Fang, J., & Jiang, Y. (2022). Effects of Surfactants on Zein Cast Films for Simultaneous Delivery of Two Hydrophilic Active Components. Materials, 15(8), 2795. https://doi.org/10.3390/ma15082795

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop