Next Article in Journal
Suspended Metasurface for Broadband High-Efficiency Vortex Beam Generation
Next Article in Special Issue
Processing and Characterization of Spark Plasma Sintered SiC-TiB2-TiC Powders
Previous Article in Journal
Investigations on the Thermodynamics Characteristics, Thermal and Dielectric Properties of Calcium-Activated Zinc-Containing Metallurgical Residues
Previous Article in Special Issue
The Role of the Activator Additives Introduction Method in the Cold Sintering Process of ZnO Ceramics: CSP/SPS Approach
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

New Graphene Composites for Power Engineering

Non-Ferrous Metals Faculty, AGH University of Science and Technology, 30-059 Krakow, Poland
*
Author to whom correspondence should be addressed.
Materials 2022, 15(3), 715; https://doi.org/10.3390/ma15030715
Submission received: 12 November 2021 / Revised: 3 January 2022 / Accepted: 15 January 2022 / Published: 18 January 2022
(This article belongs to the Special Issue Design, Properties and Processing of Novel Composites)

Abstract

Intensive research is underway worldwide to develop new conductive materials for applications in the power industry. Such tests aim to increase the electrical conductivity of materials for conductors and cables, thus increasing the current carrying capacity of the line and reducing the loss of electricity transmission. The scientific discovery of recent years, graphene, one of the allotropic types of carbon with very high electrical and thermal conductivity and mechanical strength, creates great opportunities for designing and producing new materials with above-standard operational properties. This project concentrates on developing technology for manufacturing aluminum-graphene and copper-graphene composites intended to be used to produce a new generation of power engineering conductors. In particular, we present the results of the research on the mechanical synthesis of aluminum-graphene and copper -graphene composites, as well as the results of the electric, mechanical, and structural properties of rods obtained after the extrusion process and wires after the drawing process.
Keywords: graphene; copper; aluminum; overhead conductors; composite graphene; copper; aluminum; overhead conductors; composite

Share and Cite

MDPI and ACS Style

Knych, T.; Mamala, A.; Kwaśniewski, P.; Kiesiewicz, G.; Smyrak, B.; Gniełczyk, M.; Kawecki, A.; Korzeń, K.; Sieja-Smaga, E. New Graphene Composites for Power Engineering. Materials 2022, 15, 715. https://doi.org/10.3390/ma15030715

AMA Style

Knych T, Mamala A, Kwaśniewski P, Kiesiewicz G, Smyrak B, Gniełczyk M, Kawecki A, Korzeń K, Sieja-Smaga E. New Graphene Composites for Power Engineering. Materials. 2022; 15(3):715. https://doi.org/10.3390/ma15030715

Chicago/Turabian Style

Knych, Tadeusz, Andrzej Mamala, Paweł Kwaśniewski, Grzegorz Kiesiewicz, Beata Smyrak, Marek Gniełczyk, Artur Kawecki, Kinga Korzeń, and Eliza Sieja-Smaga. 2022. "New Graphene Composites for Power Engineering" Materials 15, no. 3: 715. https://doi.org/10.3390/ma15030715

APA Style

Knych, T., Mamala, A., Kwaśniewski, P., Kiesiewicz, G., Smyrak, B., Gniełczyk, M., Kawecki, A., Korzeń, K., & Sieja-Smaga, E. (2022). New Graphene Composites for Power Engineering. Materials, 15(3), 715. https://doi.org/10.3390/ma15030715

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop