Multi-Material Additive Manufacturing for Advanced High-Tech Components
1
Center for MicroElectroMechanical Systems (CMEMS-UMinho), Campus de Azurém, University of Minho, 4800-058 Guimarães, Portugal
2
LABBELS–Associate Laboratory, Braga/Guimarães, Portugal
*
Author to whom correspondence should be addressed.
Materials 2022, 15(18), 6433; https://doi.org/10.3390/ma15186433
Submission received: 9 September 2022
/
Accepted: 13 September 2022
/
Published: 16 September 2022
(This article belongs to the Special Issue Multi-Material Additive Manufacturing for Advanced High-Tech Components)
Multi-Material Additive Manufacturing for Advanced High-Tech Components is a new open Special Issue of Materials, which aims to publish original and review papers regarding new scientific and applied research and make great contributions to finding, exploring and understanding novel multi-material components via additive manufacturing.
The development of multi-material components able to address a high level of multi-functionality based on distinct materials intrinsic properties might be a method of achieving unparalleled solutions for a wide range of applications. By exploiting the potential of additive manufacturing potential, new 3D multi-material solutions can be created for medical implants, aerospace components, molds, jewelry, collection coins and many other applications. Using advanced manufacturing technologies, such as laser powder bed fusion (adapted for manufacturing with different powders in 3D), different materials can be combined in a single component such as steel and copper, steel and titanium, Inconel and copper, Inconel and aluminum, titanium and cobalt, titanium and tantalum, titanium and zirconia, steel and silver, silver and gold, silver and copper, etc.
The combination of different materials in a single component can bring to life new possibilities, never studied, with tailored and combined functions (mechanical, physical or chemical properties). This technology and disruptive design philosophy are being investigated at CMEMS-UMinho, in Guimaraes–Portugal. A novel 3D multi-material design concept targeting plastic injection moulds was proposed by A. Cunha et al. [1]. This multi-material component combines the mechanical resistance of the 420 stainless steel alloy and the high thermal conductivity of copper, in a single component, fabricated in just one event by means of home-made 3D Multi-Material Laser Powder Bed Fusion equipment. Also, A. Marques et al. [2] fabricated novel Inconel 718–copper parts by 3D multi-material laser powder bed fusion targeting rocket engines. Topics of interest for this Special Issue, entitled Multi-Material Additive Manufacturing for Advanced High-Tech Components, includes, but is not limited to, the following (reviews and experimental and numerical studies are welcome): advanced additive manufacturing strategies; laser powder bed fusion; metal-based multi-material design; nature-inspired architectures and solutions via AM; multi-functional components; smart materials; topological optimization and high-efficiency solutions.
Funding
Project Moedinov—New aesthetics for collection coins by using advanced technologies with the reference POCI-01-0247-FEDER-033361.
Conflicts of Interest
The authors declare no conflict of interest.
References
- Cunha, A.; Marques, A.; Silva, F.S.; Gasik, M.; Trindade, B.; Carvalho, O.; Bartolomeu, F. 420 stainless steel-Cu parts fabricated using 3D Multi-Material Laser Powder Bed Fusion: A new solution for plastic injection moulds. Mater. Today Commun. 2022, 32, 103852. [Google Scholar] [CrossRef]
- Marques, A.; Cunha, Â.; Gasik, M.; Carvalho, O.; Silva, F.S.; Bartolomeu, F. Inconel 718–copper parts fabricated by 3D multi-material laser powder bed fusion: A novel technological and designing approach for rocket engine. Int. J. Adv. Manuf. Technol. 2022, 122, 2113–2123. [Google Scholar] [CrossRef]
Short Biography of Authors
Flávio Bartolomeu is currently a postdoctoral junior researcher in the Center for MicroElectroMechanical Systems (CMEMS-UMinho). He graduated in 2015 with a master’s thesis regarding selective laser melting manufacturing optimization for different metallic materials. In 2016, he started his PhD in Mech, working on a thesis entitled “Smart design of multi-functional and multi-material NiTi-Ti6Al4V cellular structured implants by Selective Laser Melting”. He earned his PhD in 2019. Currently, he is responsible for a research team focused on multi-material laser powder bed fusion for advanced developments: technology, fabrication and prototype validation. Flávio Bartolomeu currently has 36 ISI/Q1 journal publications with more than 1100 citations (h = 19).
F. S. Silva Being in the top 2% of the world’s most influential scientists, according to Stanford University (2021), Professor F. S. Silva is a Full Professor at University of Minho and coordinates a laboratory entitled Microfabrication and Systems Integration Laboratory, with 8 PhD and 31 PhD students. He holds five patents and seven others under submission, as well as five international awards. Prof. Silva leads/has led more than 25 research projects, half with companies in applied projects. Professor Silva has 320 ISI indexed papers and h = 37 (Scopus).
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Bartolomeu, F.; Silva, F.S. Multi-Material Additive Manufacturing for Advanced High-Tech Components. Materials 2022, 15, 6433. https://doi.org/10.3390/ma15186433
AMA Style
Bartolomeu F, Silva FS. Multi-Material Additive Manufacturing for Advanced High-Tech Components. Materials. 2022; 15(18):6433. https://doi.org/10.3390/ma15186433
Chicago/Turabian StyleBartolomeu, Flávio, and F. S. Silva. 2022. "Multi-Material Additive Manufacturing for Advanced High-Tech Components" Materials 15, no. 18: 6433. https://doi.org/10.3390/ma15186433
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
