Surface Phenomena at the Interface between Silicon Carbide and Iron Alloy

The paper discusses a potential composite produced using the casting method, where the matrix is gray cast iron with flake graphite. The reinforcement is provided by granular carborundum (β-SiC). The article presents model studies aimed at identifying the phenomena at the contact boundary resulting from the interaction of the liquid matrix with solid reinforcement particles. The scope of the research included, primarily, the metallographic analysis of the microstructure of the resulting composite, carried out by using light (LOM) and scanning electron (SEM) microscopy with energy dispersive X-ray spectroscopy (EDS) analysis. The occurrence of metallic phases in the boundary zone was indicated, the contents and morphology of which can be optimized in order to achieve favorable functional properties, mainly the tribological properties of the composite. In addition, the results obtained confirm the possibility of producing similar composites based on selected iron alloys.