Next Article in Journal
High Temperature Deformation Behavior and Microstructure Evolution of Low-Density Steel Fe30Mn11Al1C Micro-Alloyed with Nb and V
Next Article in Special Issue
Modification of Surface and Subsurface Properties of AA1050 Alloy by Shot Peening
Previous Article in Journal
Quantitative Strengthening Evaluation of Powder Metallurgy Titanium Alloys with Substitutional Zr and Interstitial O Solutes via Homogenization Heat Treatment
Previous Article in Special Issue
Microstructural Variation and a Physical Mechanism Model for a Ti-55511 Alloy during Double-Stage Hot Deformation with Stepped Strain Rates in the β Region
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 6565

Article: Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation
Authors: by Xin Jin, Run-Zi Wang, Yang Shu, Jia-Wen Fei, Jian-Feng Wen and Shan-Tung Tu
Link: https://www.mdpi.com/1996-1944/14/21/6565

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop