Next Article in Journal
The Designation Degree of Tool Wear after Machining of the Surface Layer of Duplex Stainless Steel
Next Article in Special Issue
Corrosion Resistance and Surface Bioactivity of Ti6Al4V Alloy after Finish Turning under Ecological Cutting Conditions
Previous Article in Journal
Laboratory Characterization of Geosynthetics-Reinforced Asphalt Mixture
Previous Article in Special Issue
Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 6420

Article: Optimization and Modeling of Material Removal Rate in Wire-EDM of Silicon Particle Reinforced Al6061 Composite
Authors: by Deepak Doreswamy, Anupkumar M. Bongale, Marcin Piekarski, Arunkumar Bongale, Satish Kumar, Danil Yurievich Pimenov, Khaled Giasin and Krzysztof Nadolny
Link: https://www.mdpi.com/1996-1944/14/21/6420

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop