Compressive Properties of Functionally Graded Bionic Bamboo Lattice Structures Fabricated by FDM

Bionic design is considered a promising approach to improve the performance of lattice structures. In this work, bamboo-inspired cubic and honeycomb lattice structures with graded strut diameters were designed and manufactured by 3D printing. Uniform lattice structures were also designed and fabricated for comparison. Quasi-static compression tests were conducted on lattice structures, and the effects of the unit cell and structure on the mechanical properties, energy absorption and deformation mode were investigated. Results indicated that the new bionic bamboo structure showed similar mechanical properties and energy absorption capacity to the honeycomb structure but performed better than the cubic structure. Compared with the uniform lattice structures, the functionally graded lattice structures showed better performance in terms of initial peak strength, compressive modulus and energy absorption.