Mrówka, M.; Machoczek, T.; Jureczko, P.; Joszko, K.; Gzik, M.; Wolański, W.; Wilk, K.
Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing. Materials 2021, 14, 2717.
https://doi.org/10.3390/ma14112717
AMA Style
Mrówka M, Machoczek T, Jureczko P, Joszko K, Gzik M, Wolański W, Wilk K.
Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing. Materials. 2021; 14(11):2717.
https://doi.org/10.3390/ma14112717
Chicago/Turabian Style
Mrówka, Maciej, Tomasz Machoczek, Paweł Jureczko, Kamil Joszko, Marek Gzik, Wojciech Wolański, and Krzysztof Wilk.
2021. "Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing" Materials 14, no. 11: 2717.
https://doi.org/10.3390/ma14112717
APA Style
Mrówka, M., Machoczek, T., Jureczko, P., Joszko, K., Gzik, M., Wolański, W., & Wilk, K.
(2021). Mechanical, Chemical, and Processing Properties of Specimens Manufactured from Poly-Ether-Ether-Ketone (PEEK) Using 3D Printing. Materials, 14(11), 2717.
https://doi.org/10.3390/ma14112717
