Next Article in Journal
Scaling-Up Techniques for the Nanofabrication of Cell Culture Substrates via Two-Photon Polymerization for Industrial-Scale Expansion of Stem Cells
Previous Article in Journal
Acknowledgement to Reviewers of Materials in 2016
Open AccessErratum

Erratum: Myoung, S.C.; Su-Tae, K.; Bang, Y.L.; Kyeong-Taek, K.; Gum-Sung, R. Improvement in Predicting the Post-Cracking Tensile Behavior of Ultra-High Performance Cementitious Composites Based on Fiber Orientation Distribution. Materials 2016, 9, 829

1
Department of Safety Engineering, Dongguk University-Gyeongju, 123 Dongdae-ro, Gyeongju, Gyeongbuk 38066, Korea
2
Department of Civil Engineering, Daegu University, 201 Daegudae-ro, Jillyang, Gyeongsan, Gyeongbuk 38453, Korea
3
School of Architecture, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Korea
4
Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, 283 Goyangdae-Ro, Ilsanseo-Gu, Goyang, Gyeonggi 10223, Korea
*
Author to whom correspondence should be addressed.
Academic Editor: Jorge de Brito
Materials 2017, 10(1), 63; https://doi.org/10.3390/ma10010063
Received: 11 January 2017 / Accepted: 11 January 2017 / Published: 19 January 2017
Note: In lieu of an abstract, this is an excerpt from the first page.

1.The authors wish to remove the symbol “†”, which indicates the equal contribution from each author. The correct authorship is shown below:[...] View Full-Text
MDPI and ACS Style

Choi, M.S.; Kang, S.-T.; Lee, B.Y.; Koh, K.-T.; Ryu, G.-S. Erratum: Myoung, S.C.; Su-Tae, K.; Bang, Y.L.; Kyeong-Taek, K.; Gum-Sung, R. Improvement in Predicting the Post-Cracking Tensile Behavior of Ultra-High Performance Cementitious Composites Based on Fiber Orientation Distribution. Materials 2016, 9, 829. Materials 2017, 10, 63.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop