Next Article in Journal
Integrated Traffic–Weather-Aware Forecasting of Urban EV Charging Demand for Infrastructure Planning
Previous Article in Journal
Electricity Consumption Databases and Contribution of a New Equatorial Dataset from Ecuador for Load Forecasting Applications
Previous Article in Special Issue
Positive-Mode-Damping Stability Criterion Application and Damping Solutions in Microgrid-Integrated Transmission Grids
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Article

Power Transformer Component Reliability Using CIGRE Large-Scale Data Surveys

1
Essential Energy, 8 Buller St., Port Macquarie, NSW 2444, Australia
2
Institute for Power Transmission and High Voltage Technology, University of Stuttgart, Pfaffenwaldring 47, 70569 Stuttgart, Germany
*
Author to whom correspondence should be addressed.
Energies 2026, 19(13), 3197; https://doi.org/10.3390/en19133197
Submission received: 4 June 2026 / Revised: 25 June 2026 / Accepted: 30 June 2026 / Published: 6 July 2026
(This article belongs to the Special Issue Emerging Trends in Enhancing Power Grid Performance)

Abstract

The probability of failure of a power transformer is difficult to quantify within a single utility because major failures are rare and operating histories are often incomplete. This paper uses large-scale CIGRE surveys (50 utilities, 26,533 transformers, 331,379 operating years) to estimate age-dependent component reliability by voltage class. In total, 1358 major failures and 991 retirements were reported for a reference period of up to 34 years. The data were treated as left-truncated and right-censored. Hazard rates were calculated for active parts, bushings, and on-load tap changers, retirements were assessed using the Kaplan–Meier estimator, and Weibull distribution models were fitted to 100–199 kV and 200–700 kV populations. The overall major failure rate was 0.41% per year. For the 100–199 kV transformers, the component hazard rates were close to constant with age (β ≈ 1), and the late-life pattern was influenced by increasing retirements. For the 200–700 kV transformers, bushing hazard showed a stronger age dependency and exceeded active-part hazard at around 50 years. The results highlight the value of component-focused risk management and show that fleet reliability should be interpreted alongside retirement and condition-management practices. Key limitations include data truncation, censoring, and the lack of categorisation of failures by technology type.
Keywords: power transformer; reliability; probability of failure; hazard rate; Weibull distribution; Kaplan–Meier estimator; survival analysis; bushing; on-load tap changer; asset management power transformer; reliability; probability of failure; hazard rate; Weibull distribution; Kaplan–Meier estimator; survival analysis; bushing; on-load tap changer; asset management

Share and Cite

MDPI and ACS Style

Martin, D.; Tenbohlen, S. Power Transformer Component Reliability Using CIGRE Large-Scale Data Surveys. Energies 2026, 19, 3197. https://doi.org/10.3390/en19133197

AMA Style

Martin D, Tenbohlen S. Power Transformer Component Reliability Using CIGRE Large-Scale Data Surveys. Energies. 2026; 19(13):3197. https://doi.org/10.3390/en19133197

Chicago/Turabian Style

Martin, Daniel, and Stefan Tenbohlen. 2026. "Power Transformer Component Reliability Using CIGRE Large-Scale Data Surveys" Energies 19, no. 13: 3197. https://doi.org/10.3390/en19133197

APA Style

Martin, D., & Tenbohlen, S. (2026). Power Transformer Component Reliability Using CIGRE Large-Scale Data Surveys. Energies, 19(13), 3197. https://doi.org/10.3390/en19133197

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop