Search Results (35)

This work aimed to design a strategy for providing a collection service of urban solid waste in communities without it, using a case study in Sombrerete, Zacatecas, Mexico. The service is provided to the municipal seat and 17 of the 173 communities, resulting in a collection coverage of 10%. Information provided by the Cleaning Department of Sombrerete was collected and analyzed on the number of collection vehicles, communities served, and final waste disposal sites. Communities without urban solid waste collection and disposal services were identified. The strategy was designed to increase the collection coverage using geographic information systems, vehicle routing problem tools, and territory sectorization. Waste collection routes were developed for 11 sectors without service, and final waste disposal sites were evaluated based on environmental protection criteria of the Mexican Official Standard. The technical and economic feasibility of the strategy were analyzed. The results obtained were the design of the collection routes strategy to increase the coverage to 100% in Sombrerete. The designed strategy was feasible since it did not require the purchase of waste collection vehicles and hiring more staff. Approximately MXN 1000 (≈USD 54, EUR 47) in economic benefits were achieved weekly. Full article

Hepatitis B and C (HBV and HCV) infections persist as significant public health concerns. Specific occupational groups, such as waste collectors, continue to face elevated risk due to exposure to contaminated materials. Research studies have underscored heightened infection rates, notably from needle prick injuries. The present study aspires to re-evaluate the prevalence of HBV and HCV among waste collectors and to scrutinize associated risk factors, thereby contributing to the development of effective public health and occupational safety strategies. The study analyzed data from 116 Italian waste collectors who were undergoing regular occupational visits, examining demographics, health conditions, HBV immunization, and annual blood tests for the HBsAg, HBsAb, and HCVAb. The HBsAb was detected in 66 individuals (56.9%), while the HCVAb was found in 4 (3.4%). Logistic regression showed HBV immunization and longer job experience to be significant factors associated with HBsAb presence. Waste collection may increase HBV infection risk due to occupational exposure, unlike HCV, which requires blood-to-blood contact. Preventive strategies, including education, protective equipment, and HBV vaccination, are essential. Ensuring vaccination coverage among waste collectors could reduce infection risk. Further research should assess the occupational risks and the effectiveness of preventive measures. Full article

Seafood waste is often landfilled and/or discarded into water, raising microbiological pollution and environment policy concerns. Repurposing this low-cost biomass collected at point-source processing centers can help reduce greenhouse gas emissions and support industrial progress in developing economies. Safe alternative methods to utilize seafood waste were investigated. Hydrothermal carbonization-enriched shrimp shell waste was converted into higher-value products, such as sprayable fertilizer and dry biochar fertilizer pellets. Environment friendly sprayable fertilizer from shrimp and crab shell waste as an inexpensive carbon fixer is a potential solution. An average spray coverage area of 0.12 m² from only 300 mL of 1:10 shrimp shell waste to water mixture is reported. Characterization using N:P:K ratios from elemental analysis showed crustacean shell waste to comprise long-term organic carbon fixers in the soil with minor mineral enrichment, demonstrating potential for long-term soil care. Additionally, hydrothermally carbonized mineral rich shrimp shell and untreated crab shell waste were pelletized to test their friability and feasibility in transportation. Such a bio-investigation to promote economic goals for sustainability can improve biomass waste handling locally. Full article

Driven by global carbon neutrality goals, biochar has gained significant attention due to its stable carbon sequestration capabilities and environmental benefits. This research employs bibliometric tools such as VOSviewer 1.6.16, Citespace 6.2 R6, and Scimago Graphica to systematically analyze 2076 publications from the Web of Science Core Collection between 2007 and 2024, aiming to clarify the evolutionary trajectory, research hotspots, and international collaboration patterns of biochar carbon sequestration research while identifying future knowledge gaps for innovation. Research results reveal a three-stage developmental characteristic: 2007–2014 was a slow accumulation period for fundamental mechanism exploration, 2015–2020 was an accelerated expansion period driven by policies like the Paris Agreement, and 2021 to the present marks an exponential growth phase of interdisciplinary integration due to global carbon market consolidation. China and the United States are core producing countries, though inter-institutional deep collaboration remains insufficient. Research hotspots have progressively shifted from early biochar preparation and carbon stability to multiple waste materials (such as rice straw and urban carbon sequestration waste) and co-pyrolysis technologies (significantly emerging since 2022), with machine learning applications in process optimization becoming a nascent direction. The study recommends increasing cross-disciplinary research funding, establishing biochar raw material pollution standards, and promoting coordinated policies that combine biochar carbon sequestration with agricultural efficiency to support global carbon reduction objectives. Notably, the research’s reliance on the Web of Science Core Collection may limit coverage of non-English literature and regional studies. By quantitatively analyzing technological evolution and collaboration networks, this study provides a data-driven framework for optimizing biochar carbon sequestration strategies, helping bridge the gap between laboratory potential and actual climate emission reduction, and offering focused action pathways for policymakers and researchers. Full article

Community Restaurants (CRs), part of the Brazilian government’s Popular Restaurant Program (PRP), provide free and/or affordable nutritionally balanced meals as an essential strategy to meet the most vulnerable population’s basic needs and rights. This cross-sectional study evaluated the effectiveness of these CRs’ proposed objectives in cities with ≥100,000 inhabitants in Brazil’s northern and northeastern regions—Brazil’s most vulnerable and historically unequal regions. Effectiveness was assessed using a CR evaluation matrix-based indicator system to classify CRs as “not very effective”, “effective”, or “very effective”. Among the 94 CRs assessed (north: n = 23, 24.5%; northeast: n = 71, 75.5%), most were classified as “effective” or “very effective”, except for the northern states of Amapá and Tocantins, whose only CR was rated as “not very effective” and the northeastern state of Sergipe, which had a PR considered “not very effective”. State-operated CRs predominated (north: 82.6%; northeast: 76.1%) and primarily operated Monday to Friday (north: 87.0%; northeast: 59.2%), with 35.2% of the northeast CRs operating daily, serving lunch as the main meal (100%). Average daily meal counts were 486.5 (north) and 926.9 (northeast), and the average meal offering time was from 10:55 am to 1:21 pm in the north and from 10:35 am to 2:00 pm in the northeast region, with costs averaging USD 0.27 and USD 0.20, respectively. All CRs employed a nutritionist as a technical manager responsible for menu planning and demonstrated compliance with essential infrastructure criteria, including regular waste collection, water supply, and proximity to public transport. Most were in areas with sanitary sewage coverage (north: 91.3%; northeast: 98.6%) and had monitoring mechanisms (91.3% north; 94.4% northeast) and prioritization systems for vulnerable populations (north: 73.9%; northeast: 80.0%). These findings indicate that CRs in these regions effectively strive to address food security goals, demonstrating tangible outcomes that benefit society. Full article

Soil covering is a soil management technique used to address issues such as high alkalinity, nutrient deficiency, and a low soil and water-holding capacity in saline–alkali lands. Coal gangue, a solid waste generated from coal mining, contains nutrients and trace elements comparable to those in soil, making it a promising covering material. This study investigates the effects and mechanisms of coal gangue coverage on the physicochemical properties of soil, enzyme activity, and the growth of ryegrass. The experimental treatments comprised (1) three coal gangue particle sizes (0–0.5 cm, 0.5–1 cm, and 1–2 cm) and (2) three coverage thicknesses (4 cm, 8 cm, and 12 cm). The results show that with particle sizes of 0–1 cm and cover thicknesses of 8–12 cm, the saturated water content of the soil increased by 11.1% to 17.23%, the content of organic matter rose by 4.99 to 13.64 mg/kg, the total nitrogen increased by 0.07 to 0.12 mg/kg, and the urease activity increased by 0.56 to 0.64 μg/(d·g). Our analyses indicated that an improvement in soil porosity, a reduction in pH, and an increase in urease, organic matter, and total nitrogen collectively promoted ryegrass growth, with similar impacts. Among the treatments, coverage with 12 cm of coal gangue with a size of 0.5–1 cm produced the best results, increasing the ryegrass height by 16.24 cm, primarily due to a high level of soil porosity and elevated urease activity. In conclusion, coal gangue coverage significantly improves the properties of soil, enhances enzyme activity, and promotes ryegrass growth. Full article

A large amount of energy can accumulate and be stored during underground coal fires. As thermal energy cannot be easily removed using the traditional technologies of fire prevention and extinguishment, there is a potential benefit to collecting and utilizing thermal energy from coal fires and converting it to electrical energy. Thus, this work proposes a thermoelectric generator as a solution to convert thermal energy from coal fires to electrical energy. To improve the thermal energy conversion efficiency, an experimental test system was established using a thermosyphon, an electric heating module, a cooling circulation module, a thermoelectric module, and a data acquisition module. Under the condition of ensuring the same input heat and cooling boundary conditions, the influence of three factors, namely the cooling method, the connection method, and the coverage rate of thermoelectric devices, on the performance of the coal fire waste heat conversion system was studied. The results show that, compared with air cooling, water cooling provides a greater temperature difference for the thermoelectric module, and the maximum temperature difference can reach 65.90 °C. Series connection between thermoelectric devices will generate a higher open-circuit voltage and output voltage. The maximum horizontal open-circuit voltage value can reach 3.34 V, and the maximum output voltage is 2.61 V. Compared with the coverage rates of thermoelectric devices of 15.0% and 30.0%, the output power under the coverage rate of 22.5% is the largest at 0.35 W, and its thermoelectric conversion efficiency is also the largest at 0.35%. The optimal combination of thermoelectric modules obtained from the research results can provide ideas for the application of in situ coal fire prevention and control. Full article

Background: Microarray patches (MAPs) are innovative, needle-free vaccine delivery systems, suitable for administration by minimally trained health care workers or trained community health workers. Their introduction may transform immunization programmes, particularly for vaccines where high coverage is required for population immunity, such as measles, and where vaccine delivery is challenging, such as in low- and middle-income countries. Recognizing the need to understand how best to tailor these products to reflect country priorities, workshops on measles and rubella MAPs (MR-MAPs) were conducted in multiple regions to collect insights on needs and preferences from relevant stakeholders at country level. Methods: The CAPACITI Innovation Framework was used to structure stakeholder discussions in nine countries in the period from August 2022 to July 2023. The discussions, building on the findings from a situation analysis on the barriers related to measles and rubella vaccine delivery, followed the four-step process outlined in the framework. Results: Key barriers hindering delivery of measles and rubella vaccines across the countries were in the categories of human resource management, service delivery, and demand generation. MR-MAP attributes that stakeholders believed would reduce or eliminate these barriers included ease of preparation and administration, improved thermostability, fewer (ancillary) components, and single-dose presentation. Some attributes such as the site of administration, wear time, and storage volume could exacerbate certain barriers. Based on an understanding of key barriers, product attributes, and underserved populations, stakeholders identified several potential use cases for MR-MAPs: (i) delivery at a fixed health post, (ii) delivery through outreach sessions conducted by health workers, and (iii) administration by community health workers. To enable robust national decision making about the introduction of MR-MAPs and successful implementation, global and national evidence on feasibility and acceptability of MR-MAPs should be generated. To prepare for the potential introduction of MR-MAPs, immunization programmes should evaluate their immunization policies based on their preferred use cases and modify them if needed, for example, to enable community health workers to administer vaccines, along with making programmatic adjustments to waste management and training. Conclusions: MR-MAPs have the potential to reduce key barriers to MR delivery. Yet, their future impact depends on the ability of global stakeholders to steer the development of MR-MAPs to be responsive to country needs and preferences. The generation of evidence to enable robust decision making, timely modification of vaccine policies, and addressing programmatic considerations will be key to successful uptake. Full article

In this research, an analysis of the socio-environmental vulnerability in the urban area of the border municipality of Tijuana, Baja California (BC), in Mexico is carried out with data from the year 2020. Currently, this municipality is the most populated in the country, housing a population of just over 1.9 million inhabitants, characterized by being a city in constant urban growth due to its geographical location and various social, cross-border and productive dynamics directed by industrial development. However, Tijuana presents territorial problems related to lack of urban planning, overpopulation, urban marginalization, topographic conditions, urban waste management, air quality and lack of infrastructure and basic services. The proposed methodology develops a socio-environmental vulnerability index (SEVI), based on the evaluation of critical or extreme demographic and urban aspects, including social, economic, environmental and physical variables of the territory with the support of the Geographic Information System (GIS). This index is composed of a total of 19 indicators related to education, health, employment, housing conditions, infrastructure, population settlement, industrial concentration and some factors regarding environmental quality, especially focused on the disposal of urban solid waste (USW) in clandestine sites, garbage collection service coverage and flood risk. This analysis allowed us to determine the groups most vulnerable to socio-environmental risks in 692 Basic Geostatistical Areas (AGEB, the acronym in Spanish) of nine city delegations. The results of the research highlight that 14.78% of the population is between a situation of high and very high socio-environmental vulnerability, representing just over 284,000 inhabitants. It is concluded that the use of GIS in spatial planning allows us to identify risk areas and thereby promote more sustainable measures to ensure the well-being of the population. Full article

In this paper, a proposal was presented to improve the MSW collection service in the municipality of Reforma, in Chiapas, Mexico. Specific field work was developed and various spatial analysis techniques were applied in the GIS environment. The application of a multivariate analysis technique (Grouping Analysis) allowed the study area to be clustered into three waste collection sectors with common characteristics, which were the basis for generating three collection route scenarios. Scenario 1 corresponds to the current situation, where 478 waste collection points are served, with an average travel distance of 60.30 km and a collection time of 8.00 h. Scenario 2 was generated through the “maximize coverage” algorithm and vehicle route modeling in ArcGis 10.8. In this scenario, 1220 waste collection points are served, with an average travel distance of 143.21 km and an average collection time of 12.38 h. Scenario 3 was created using the “minimize facilities” algorithm, as well as collection modeling in ArcGis 10.8. Using this algorithm, impedances (distances) were automatically minimized so that 697 waste collection points could be served, with an average travel distance of 100.00 km and an average collection time of 9.66 h. In terms of improvement, scenario 3 gives the best results, because it minimizes distances and average travel times. Full article

This paper proposes a heuristic procedure created to improve the collection routes obtained with the support of the ArcGIS software and its complement, Network Analyst. After a series of experiments, it was found that the software presents several inconsistencies with logistical and operational management concepts, such as the unnecessary realization of U-turns in a dead end and unnecessary access to areas with difficult access to a single customer. These are issues that a collection route planner must consider to make a good decision that considers the cost of visiting areas with difficult access and the benefits of reaching that area. In this sense, our heuristic procedure considers a set of best practices in operational and logistical strategies that could be programmed within the Network Analyst. As it is well known in the science of vehicle routing, U-turns and sub-tours in the routes travelled by vehicles increase distances and operating costs, so in our work, we propose a systematic heuristic procedure to reduce the number of U-turns performed by a municipal waste collection truck, while using the ArcGIS-Network Analyst add-on to reduce the number of sub-tours in the route under the Directed-Capacitated Arc Routing Problem approach. It is then shown how the routes improved using our conceptual heuristic procedure, which provides better quality than the original routes obtained with ArcGIS and Network Analyst. Specifically, reducing the total distances travelled by the vehicle fleet, increasing the coverage of sidewalks visited by the truck in the urban perimeter of a city, and minimizing the time used in municipal solid waste collection operations. The importance of our work lies in the fact that effective MSW management is an essential municipal service whose regulation can drive innovation, sustainability, and efficiency in the MSW sector. Full article

Implementing reverse logistics in the construction industry is considered a crucial method to achieve a circular economy. Despite a wealth of research focusing on improving reverse logistics systems, businesses still encounter challenges during the implementation process. Therefore, this study conducted a systematic literature review utilizing bibliometric methods to analyze 623 articles on reverse logistics in the construction industry published on Web of Science from 1995 to 2023. Additionally, a comprehensive review of 56 high-quality literature on obstacles to implementing reverse logistics in the construction industry and optimizing reverse supply chains was conducted. This review uncovered the current status and challenges of implementing reverse logistics in the construction industry and proposed potential solutions to address these issues. The main findings of this study include: (1) increasing academic interest in construction waste reverse logistics, with Chinese scholars leading the way and publications predominantly in environmental and construction journals, with limited coverage in logistics journals; (2) the primary obstacles to implementing reverse logistics in the construction industry lie in supply chain management, such as lacking deconstruction designs, incomplete recycling markets, difficulties in evaluating the quality of secondary materials, and insufficient supply chain integration; (3) proposing a framework for a construction industry reverse logistics supply chain ecosystem, aiming to establish a platform to facilitate online collection of construction waste, online transactions of secondary materials, end-to-end monitoring, and data analytics for consultation. Full article

This study provides a comprehensive analysis of global patent trends in battery recycling, focusing on secondary batteries and related technologies across Korea, China, and the United States. The methodology involved collecting data from various patent databases, followed by quantitative analysis to identify technology trends and guide future development. The research employed statistical tools to analyze patent activities, including the frequency and scope of patent filings, and comparative analysis to highlight differences between countries. This study reveals distinct emphases on technologies such as lithium-ion and waste battery recycling, highlighting notable differences in patent activities among key companies and countries. China’s large number of patents in battery manufacturing processes contrasts with the USA’s focus on electrochemical cell construction and storage systems, while Korea shows significant activity in waste battery technology. The novelty of this paper lies in its detailed comparative analysis of patent trends across these three major economies, providing insights into the technological focuses and priorities of each country. The study also identifies key challenges, such as the need for consistent innovation and broader geographic coverage in Korea, enhancing patent influence and international presence in China, and ensuring high patent quality and fostering innovation in lagging sectors in the United States. Addressing these challenges through enhanced collaboration, increased R&D investments, and supportive policies is crucial for strengthening the global position and driving further innovation in the battery recycling sector. Full article

Taeniasis and cysticercosis are parasitic infections that affect humans and pigs. Their global distribution constitutes a serious public health issue with significant implications for pork production. The purpose of this study was to evaluate the presence of porcine cysticercosis in backyard swine from 42 indigenous communities throughout Tuchín-Córdoba, Colombia. Between December 2020 and March 2021, free-range pigs (n = 442) were assessed using the ELISA cysticercosis Ag test; 85 pigs were examined through sublingual visual evaluation, and 4 slaughtered pig carcasses were subjected to standard operation inspection. The collected cysticercus underwent histological and PCR analysis. Furthermore, 192 surveys of knowledge, attitudes, and practices (KAP) were used to identify the factors that facilitate infection transmission. Serological investigation revealed that 9.7% (46/472) of the animals were positive for cysticerci Ag. Sublingual inspection identified cysticercus in 28.7% (25/87) of the animals, while PCR analysis indicated that cysticercus corresponded to the T. solium American/African genotype. The factors associated with T. solium infection in the pigs in the surveyed areas numbered 14. The majority are associated with factors that promote the active persistence of Taenia solium’s life cycle in an area, such as lack of environmental sanitation, a lack of coverage or care for drinking water and wastewater treatment services, and no solid waste disposal. Full article

The pursuit for better skin health, driven by collective and individual perceptions, has led to the demand for sustainable skincare products. Environmental factors and lifestyle choices can accelerate skin aging, causing issues like inflammation, wrinkles, elasticity loss, hyperpigmentation, and dryness. The skincare industry is innovating to meet consumers’ requests for cleaner and natural options. Simultaneously, environmental issues concerning waste generation have been leading to sustainable strategies based on the circular economy. A noteworthy solution consists of citrus by-product valorization, as such by-products can be used as a source of bioactive molecules. Citrus processing, particularly, generates substantial waste amounts (around 50% of the whole fruit), causing unprecedented environmental burdens. Hesperidin, a flavonoid abundant in orange peels, is considered to hold immense potential for clean skin health product applications due to its antioxidant, anti-inflammatory, and anticarcinogenic properties. This review explores hesperidin extraction and purification methodologies as well as key skincare application areas: (i) antiaging and skin barrier enhancement, (ii) UV radiation-induced damage, (iii) hyperpigmentation and depigmentation conditions, (iv) wound healing, and (v) skin cancer and other cutaneous diseases. This work’s novelty lies in the comprehensive coverage of hesperidin’s promising skincare applications while also demonstrating its potential as a sustainable ingredient from a circular economy approach. Full article