Search Results (5,485)

Amyloid fibrillization represents an effective strategy for extending and enhancing protein function, particularly for the delivery of hydrophobic active substances. In this study, oat globulin (OG) and its fibrils were complexed with quercetin (Que) to construct the delivery system, and ultrasonic pretreatment was applied during fibril preparation to explore the promoter of complex formation. The results demonstrated that complexation with Que induced a dose-dependent static quenching of the intrinsic fluorescence of the protein/fibrils, with hydrophobic interactions and tryptophan residues being the primary interaction forces and the main fluorescence quenching groups, respectively. In comparison, OG fibrils prepared with ultrasound pretreatment (UOGF) exhibited the strongest encapsulation and loading capacity for Que, ranging from 97.16% at a mass ratio of 200:1 to 42.48% at a ratio of 25:1. Subsequently, complexes were prepared with a ratio of 50:1. Structural analysis revealed that Que primarily interacts with the protein/fibril carriers through hydrogen bonds and hydrophobic interactions, inducing structural changes and ultimately being encapsulated in an amorphous form within the composite material. Additionally, Que promoted the mutual aggregation and cross-linking of protein/fibril units, leading to increased hydrodynamic diameter and zeta-potential. Moreover, UOGF-Que showed the greatest improvement in the thermal stability and the photostability of Que, and enhancing the bioaccessibility. These findings provide valuable insights into using ultrasound as an auxiliary measure for fibril self-assembly to enhance the application potential of fibrils, especially the delivery of hydrophobic functional substances. Full article

Snow construction plays a crucial role in military operations in cold regions, providing tactical fortifications, thermal insulation, and emergency infrastructure in environments where conventional building materials are scarce or require extensive infrastructure for support. Current snow construction methods, including manual piling and compaction, are labor-intensive and inconsistent, limiting their use in large-scale or time-sensitive operations. This study explores the feasibility of adapting a compressed earth block (CEB) machine to produce compressed snow blocks (CSBs) as modular, uniform building units for cold-region applications. Using an AECT Impact 2001A hydraulic press, naturally occurring snow was processed with a snowblower and compacted at maximum operating pressure (i.e., 20,684 kPa) to evaluate block formation, dimensional consistency, and density. The machine successfully produced relatively consistent CSBs, but the initial 3–4 blocks following block height adjustment were generally unsuccessful (e.g., incorrect block height or collapsed/broke) while the machine reached its steady state cyclic condition. These blocks were discarded and excluded from the dataset. The successful CSBs had mean block heights of 7.76 ± 0.56 cm and densities comparable to ice (i.e., 0.83 g/cm³). Variations in block height and mass may be attributed to manual snow loading and minor material impurities. While the dataset is limited, the results warrant further investigation into this technology, particularly regarding CSB strength (i.e., hardness and compressive strength) and performance under variable snow and environmental conditions. Mechanized snow compaction using existing CEB technology is technically feasible and capable of producing uniform, structurally stable CSBs but requires further investigation and modifications to reach its full potential. With design improvements such as automated snow feeding, cold-resistant components, and system winterization, this approach could enable scalable CSB production for rapid, on-site construction of snow-based structures in Arctic environments, supporting the military and civilian needs. Full article

This study deals with the incorporation of biostimulants of natural origin in a biodegradable polymeric matrix, with the aim of developing mulch films that, when degraded in the soil, release bioactive compounds that improve soil quality and favor the agronomic growth of crops. Three types of commercial biostimulants were used: one based on seaweed extract, one on lignosulfonates, and one on plant-derived essential amino acids. To ensure the thermal stability of the biostimulant compounds during processing, thermogravimetric analyses (TGAs) were carried out, and a methodology based on the adsorption of the biostimulants onto porous substrates was developed, enabling their effective incorporation into the polymeric matrix. The formulations obtained have been processed by blown film extrusion at a pilot scale. In addition, the presence of film residues in soil was analyzed by pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS). The results indicate that the proposed methodology supports the integrity of the biostimulants in the films obtained. After the incubation period studied, complete degradation of the biopolymer and the absence of film residues in the soil were confirmed. Furthermore, it was confirmed that this final product had no adverse effects on organisms that were representative of the two end-of-life scenarios, with the exception of the film functionalized with the commercial biostimulant based on seaweed extract, which showed a negative effect on terrestrial higher plants. Full article

Alkyd resins (ARs) represent a significant development in synthetic polymers, being among the oldest ones and playing a crucial role in numerous applications, especially within the coating sector. The trend is moving towards replacing non-renewable resources in the production of ARs with bio-based alternatives, with the goal of creating more sustainable binder materials as part of the transition to a bioeconomy. 2,5-Furandicarboxylic acid (FDCA) serves as a promising biomass-derived “building block” to replace non-renewable petroleum-derived aromatic diacids and anhydrides in AR synthesis. Various vegetable oils, including sunflower seed (SFO) and linseed oils (LSO), were utilized along with pentaerythritol (P) and glycerol (G) as polyols. FTIR and ¹H NMR spectroscopies were conducted for the verification of alkyd structures. The synthesized ARs were assessed for their physico-chemical properties, including acid value, hydroxyl value, color, density, and viscosity. The performance of the resulting alkyd coatings, which are crucial for their commercial applications, was examined. Key factors such as drying time, hardness, adhesion, wettability, chemical and corrosion resistance, and UV stability were analyzed. All synthesized FDCA-based alkyd coatings demonstrate outstanding adhesion, good thermal stability up to 220 °C, and barrier properties for steel with |Z|_0.02Hz ~10⁶–10⁷ Ohm cm⁻², which render them suitable for the processing requirements of indoor coating applications. The higher temperature at 50% mass loss (T₅₀) for SFO-P (397 °C) and LSO-P (413 °C) as compared to SFO-G (380 °C) and LSO-G (394 °C) indicated greater resistance to thermal breakdown when pentaerythritol was used as a polyol. Replacing glycerol with pentaerythritol in FDCA-based ARs resulted in a viscosity increase of 1.2–2.4 times and an enhancement in hardness from 2H to 3H. FDCA-based ARs exhibited decreased tack-free time, enhanced thermomechanical properties, and similar hardness as compared to phthalic anhydride-based ARs, underscoring the potential of FDCA as a sustainable alternative to phthalic anhydride in the formulation of ARs, integrating a greater proportion of renewable components for wood coating applications. Full article

Paraffin-based phase change materials (PCMs) have emerged as promising candidates for thermal energy storage (TES) applications due to their high latent heat, chemical stability, and low cost. However, their inherently low thermal conductivity and the risk of leakage during melting–solidification cycles significantly limit their practical performance. To address these limitations, numerous studies have investigated composite PCMs in which paraffin is incorporated into porous supporting matrices. Among these, diatomite has garnered particular attention due to its high porosity, large specific surface area, and chemical compatibility with organic materials. Serving as both a carrier and stabilizing shell, diatomite effectively suppresses leakage and enhances thermal conductivity, thereby improving the overall efficiency and reliability of the PCM. This review synthesizes recent research on paraffin–diatomite composites, with a focus on impregnation methods, surface modification techniques, and the influence of synthesis parameters on thermal performance and cyclic stability. The mechanisms of heat and mass transport within the composite structure are examined, alongside comparative analyses of paraffin–diatomite systems and other inorganic or polymeric supports. Particular emphasis is placed on applications in energy-efficient buildings, passive heating and cooling, and hybrid thermal storage systems. The review concludes that paraffin–diatomite composites present a promising avenue for stable, efficient, and sustainable phase change materials (PCMs). However, challenges such as the optimization of pore structure, long-term durability, and large-scale manufacturing must be addressed to facilitate their broader implementation in next-generation energy storage technologies. Full article

The article examines the synthesis and electrophysical properties of spinel ferrite ZnFe₂O₄, produced using the sol–gel method with a solid-state finishing process; as well as through classical ceramic technology with mechanochemical activation. The study includes a detailed analysis of the phase composition and crystalline structure using X-ray diffraction; infrared spectroscopy; mass spectrometry; and thermogravimetric and differential thermal analyses. These methods help identify thermal effects and the stages of synthesis. Impedance spectroscopy is used to investigate the electrophysical properties, revealing a significant influence of firing temperature on electrical ionic conductivity. The results show that the electrophysical properties differ based on the synthesis conditions and methods. This suggests potential applications for ZnFe₂O₄ as a cathode material in metal-ion batteries. The work highlights the importance of optimizing synthesis conditions to achieve high-performance characteristics in electrode materials. Full article

The utilization of post-production and post-processing by-products aligns with current trends in sustainable fruit industry practices. Recovering valuable nutrients from such materials holds significant potential for the food, nutraceutical, pharmaceutical, and cosmetic sectors. Among these, cornelian cherry (Cornus mas L.) seeds represent a promising source of functional ingredients, particularly due to their oil’s rich nutritional and phytochemical profile. The seeds, accounting for approximately 9–10% of the fruit mass, yield an oil characterized by high levels of polyunsaturated fatty acids—mainly linoleic acid (≈67.5%) and oleic acid (≈20%)—alongside palmitic (≈5.8%) and stearic acids (≈2.1%). Linolenic acid content, however, shows notable variability (1.4–14.7%), influencing the oil’s omega-6/omega-3 ratio, which generally remains below 5:1. Cornelian cherry seed oil stands out among other stone fruit oils (e.g., rosehip, apricot, peach, cherry, plum) for its favorable fatty acid composition and absence of cyanogenic glycosides, making it safe for human consumption. Beyond its nutritional value, this oil exhibits biological activity and health-promoting potential, suggesting wide applicability in functional foods and nutraceutical formulations. Despite progress in characterizing seed composition—including proteins, lipids, carbohydrates, minerals, and tannins—knowledge gaps persist regarding the transfer of these compounds into the oil, particularly under cold-pressing conditions. Future studies should focus on optimizing extraction processes, assessing thermal treatment effects, and clarifying the variability of linolenic acid. Such research will support the sustainable exploitation of cornelian cherry by-products and the industrial-scale development of this high-value oil. Full article

The growing demand for sustainable alternatives to animal and synthetic leathers has accelerated interest in mycelium-based materials as an eco-friendly solution for the fashion industry. This study explores the potential of mushroom mycelium to create leather-like materials that align with circular fashion principles. Five species of edible and medicinal mushrooms were cultivated on sawdust substrates and evaluated for their growth performance, physical properties, and suitability as leather substitutes. Growth analysis revealed distinct species-specific behaviors: Cubamyces flavidus and Lentinus squarrosulus exhibited rapid colonization, achieving full substrate coverage within five days and forming dense mycelial networks at 14 days. In contrast, despite growing more slowly, Sanghuangporus vaninii and Ganoderma gibbosum formed thicker, more compact mats that might be suitable for strong leather-like materials. Visual and structural assessments showed diverse textures, colors, and hyphal architectures resembling natural leather. Physical characterization revealed shrinkage ranging from 13.17% to 24.09%, higher than for cow tanned leather (>5%) and PU microfiber (0.1–1.2%), suggesting a need for stabilization treatments. Apparent densities ranged from 0.13 g/cm³ to 0.30 g/cm³, lower than those of cow leather (0.49 g/cm³) and PU leather (0.38 g/cm³), highlighting species-specific hyphal structures that influence flexibility, porosity, and strength. SEM imaging confirmed the presence of interwoven hyphal mats resembling the fibrous architecture of natural leather, with S. vaninii showing the most uniform and continuous structure. Water absorption was significantly higher in mycelium sheets, consistent with their microporous nature, though S. vaninii showed the lowest uptake, reflecting possible natural water absorption. Thermogravimetric analysis revealed three-stage degradation profiles, with S. vaninii and G. gibbosum retaining >35% mass at 400 °C, indicating strong thermal stability for processing techniques such as hot pressing and finishing. Overall, the results demonstrate mycelium-based leathers as a biodegradable, low-impact alternative that can replicate the visual and functional characteristics of traditional leather, with opportunities for further improvement in substrate optimization, eco-tanning, surface coating, and scalable production toward a sustainable fashion future. Full article

Fractured lost circulation remains a major drilling challenge due to low compatibility between conventional plugging materials and fractures. By utilizing thermosetting resin emulsification and high-temperature crosslinking coalescence, this study developed a temperature-activated nanomaterial enhanced liquid–solid phase transition plugging emulsion. The system adapts to varying fracture apertures, forming plugging particles with a broad size distribution and high strength upon thermal activation. The structural characteristics, mechanical properties, and fracture-plugging performance of the plugging particles were systematically investigated. Results demonstrate that the optimized system, comprising 8 wt.% emulsifier, 0.16 wt.% dispersant, 0.4 wt.% crosslinker, 0.4 wt.% viscosifier, 70 wt.% distilled water, and 2 wt.% nano-silica (all percentages relative to epoxy resin content), can produce particles with a size of 1–5 mm at formation temperatures of 80–120 °C. After 16 h of thermal aging at 180 °C, the particles exhibited excellent thermal stability and compressive strength, with D(90) degradation rates of 3.07–5.41%, and mass loss of 0.63–3.40% under 60 MPa. The system exhibits excellent injectability and drilling fluid compatibility, forming rough-surfaced particles for stable bridging. Microscopic analysis confirmed full curing in 140–180 min. Notably, it sealed 1–5 mm fractures with 10 MPa pressure, enabling adaptive plugging for unknown fracture apertures. Full article

The use of artificial oxygenation to counteract the effects of hypoxia and improve living standards in high-altitude, low-oxygen settings is widespread. A recognized consequence of this intervention is that it elevates the risk of fire occurrence. In this study, we simulated a real fire environment with low-pressure oxygen enrichment in a plateau area. A new multi-measuring apparatus was constructed by integrating an electronic control cone heater and a low-pressure oxygen enrichment combustion platform to enable the simultaneous measurement of multiple parameters. The combined effects of varying oxygen concentrations and thermal irradiance on the combustion behavior of wood plastic composites (WPCs) under specific low-pressure conditions were investigated, and alterations in crucial combustion parameters were examined and evaluated. Increasing the oxygen concentration and heat flux significantly reduced the ignition and combustion times. For instance, at 50 kW/m², the ignition time decreased from 75 s to 16 s as the oxygen concentration increased from 21% to 35%. This effect was suppressed by higher heat fluxes. Compared with low oxygen concentrations and low thermal radiation environments, the ignition time of the material under high oxygen concentrations and high thermal radiation conditions was shortened by more than 78%, indicating that its flammability is enhanced under extreme conditions. Higher oxygen concentrations enhanced the heat feedback to the fuel surface, which accelerated pyrolysis and yielded a more compact flame with reduced dimensions and a color transition from blue-yellow to bright yellow. This intensified combustion was further manifested by an increased mass loss rate (MLR), elevated flame temperature, and a decline in residual mass percentage. The combustion of WPCs displayed distinct stage characteristics, exhibiting “double peak” features in both the MLR and flame temperature, which were attributed to the staged pyrolysis of its wood fiber and plastic components. Full article

The Dual Fluid Reactor (DFR) is a Generation IV concept that relies on a phased development pathway using a low-temperature microdemonstrator ($\mu$DEMO) and a high-temperature minidemonstrator (mDEMO). A rigorous methodology is required to scale experimental data between these facilities to ensure the reliable design of the final reactor. This paper establishes such a methodology grounded in Similarity Theory. The Cathare-2 system code was used to perform a parametric study on a simplified model of the demonstrators, which use lead–bismuth eutectic and pure liquid lead, respectively. This study focused on identifying the specific operating conditions required to match key “defining” dimensionless numbers—the Reynolds number (Re) for dynamic similarity and the Peclet number (Pe_h) for thermal similarity. The analysis successfully identified and presented the distinct operating ranges of fluid velocity and mass flow required to achieve either state. Results show that matching the Reynolds number allows for the dimensionless pressure drop to be scaled with a deviation below 0.2%, while matching the Peclet number allows for the dimensionless temperature profile to be scaled with a deviation under 2.5%. The central finding is that dynamic and thermal similarity cannot be achieved simultaneously due to the different working fluids and temperatures of the demonstrators. This forces a strategic choice in experimental design, where an experiment must be tailored to investigate either fluid dynamics or heat transfer. This work provides the foundational “rulebook” for designing these crucial experiments, ensuring that data from the DFR demonstrator program is both reliable and scalable. Full article

The induction of resistance in plants involves prior activation of physiological and biochemical systems in the face of external stimuli, promoting greater tolerance to biotic stresses. Faced with the growing challenge of emerging diseases in agricultural plants and the search for more sustainable phytosanitary practices, natural substances are promising alternatives. Xylopia frutescens, known as “pindaiba-da-folha-pequena”, native to the Brazilian Cerrado and traditionally used as an antimicrobial treatment, is still little-explored in the literature and presents potentially effective compounds for the control of plant diseases. This study characterized the chemical composition and thermal stability of the X. frutescens essential oil (XEO), while evaluating its physiological and phytotoxic effects and the potential for disease control in maize and cowpea plants. The main constituents found in X. frutescens essential oil were nopinone (13.75%), spatulenol (12.94%), myrtenal (12.47%), and β-pinene (11.02%). Thermogravimetric analysis indicated that X. frutescens is highly volatile, with a large mass loss at 94.74 °C. In bioassays, the oil preserved chlorophyll levels at adequate amounts and activated several antioxidant mechanisms, but also showed a dose-dependent phytotoxic effect. In vitro assays further confirmed its antifungal activity against key phytopathogens, supporting its potential use in disease control. A general increase in the activities of the enzymes superoxide dismutase (SOD), ascorbate peroxidase (APx) and—partially—chitinase (CHIT) was observed. Catalase (CAT) decreased in both maize and cowpea plants treated with this essential oil but was higher in untreated infected plants. Such enzymatic changes suggest that the oil acts as a natural elicitor of resistance, strengthening biochemical and physiological defenses. Finally, disease severities, as measured by AUDPCs, demonstrated significant reductions in the progress of maize “Curvularia leaf spot” (Curvularia lunata) and cowpea “Web blight” (Rhizoctonia solani). The results highlight the potential of X. frutescens essential oil as an active compound stimulating defense mechanisms for applications in sustainable agricultural systems. Full article

According to existing ecological problems, one of the promising developments is the creation of polyfunctional materials, which can be biodegradable, along with possessing antibacterial activity. The present research proposes biocomposites based on PLA with silver nanoparticles (AgNPs) and natural polysaccharides obtained in a twin-screw extruder. Introduction of polysaccharides to PLA-based biocomposites with/without AgNPs led to significant decrease in the elastic modulus and tensile strength, while the elongation at break remained almost unchanged. Thanks to the presence of natural polysaccharides, there was intensified biodegradation in soil despite the AgNP availability. The maximal mass loss was 29% for the PLA–PEG₁₀₀₀–starch + AgNPs (80:10:10 + 0.5 wt%) biocomposite. Analyses of the systems before and after soil exposure were carried out using DSC and FTIR spectroscopy methods. According to a thermal analysis, it was found that PLA crystalline regions degrade during exposure to soil. The same feature was detected during the spectral analysis. The intensity of the characteristic absorption bands of PLA decreased. Furthermore, it was found that the dark areas on the surface of the materials are of a polysaccharide nature and may be signs of biofouling of the materials by microbial flora. The tests on fungus resistance showed that biocidal additives such as AgNPs in PLA-based biocomposites with polysaccharides did not inhibit the development of mycelial fungi–biodestructors. And the increased amount of chitosan in the films contributed to their more active destruction by the end of the observation period. It was demonstrated that such biocomposites can inhibit bacterial growth. Full article

This article investigates the impact of Arrhenius energy and the radius of a nanoparticle subject to an irregular heat source on tangent-hyperbolic nanofluid flow over a stretching sheet with nonlinear radiation. The convective boundary effect, higher-order slip, and micropolarity are all included for a water-based $Cu$ nanofluid. The present study investigates the significance of a nanoparticle’s radius under inclined MHD conditions. The thermally convective flow of the nanofluid is optimized for the heat-transfer rate using the response surface technique. The modeled governing equations are converted into a system of first-order ODEs using the proper similarity transformations, and the BVP5C algorithm—a finite-difference-based solver—is then used to solve these ODEs numerically. Microrotation, thermal boundary-layer thickness, and the skin-friction coefficient all decrease as the nanoparticle radius increases. The thermal layer thickens as the Biot number increases. As the higher-order slip parameter coefficient increases, the results indicate that the skin friction and local Nusselt number fall. Using tables, figures, contour plots, and surface plots, the effects of several influencing factors on the rates of heat and mass transfer, as well as on the skin-friction factor, are demonstrated. The study uses “Response Surface Methodology” (RSM) in conjunction with “Analysis of Variance” (ANOVA) to optimize the most important factors, which are probably the magnetic parameter and the nanoparticle radius that control the flow and heat-transfer properties. Additionally, with a Nusselt number $R^2$ value of $99.96$, indicating an excellent fit, the suggested model exhibits amazing precision. The reliability and efficiency of the estimated model are assessed using the residual versus fitted plot. Full article

Mathematical modeling of unitized regenerative fuel cells (URFCs) faces significant challenges in reconciling parameter conflicts between fuel cell (FC) and electrolysis cell (EC) modes. This study establishes a COMSOL-based multi-physics framework coupling water–gas–heat–electric transport for both operational states. The critical factors associated with the model were identified through a systematic sensitivity analysis of structural and operational parameters, including temperature, exchange current density, conductivity, porosity, and flow rates. FC modes exhibited strong sensitivity to exchange current density (27.8–40.5% performance variation) and conductivity of membrane (10.1–35.6%), while temperature degraded performance (−4.2% to −4.0%). Spatial analysis revealed temperature-induced membrane dehydration and accelerated gas depletion at electrodes, thus explaining the negative correlation. EC modes were dominantly governed by temperature (8.6–9.4%), exchange current density (13.0–16.4%), and conductivity (2.5–13.3%). Channel simulations revealed that elevated temperature contributed to enhanced liquid water fluidity, while high flow rates had a relatively limited effect on mitigating species concentration gradients. Parameter optimization guided by sensitivity thresholds (e.g., porosity > 0.4 in FC GDLs, conductivity > 222 S/m in EC modes) enabled dual-mode calibration. The model achieved <4% error in polarization curve validation under experimental conditions, demonstrating robust prediction of voltage–current dynamics. This work resolves key conflicts of URFC modeling through physics-informed parameterization to provide a foundation for efficient dual-mode system design. Full article