Search Results (15)

Background/Objectives: Proximal interphalangeal joint (PIJ) arthrodesis is a common surgical intervention for patients with PIJ osteoarthritis or trauma-related joint destruction. The objective of this study was to evaluate the biomechanical stability of various arthrodesis techniques under forces comparable to activities of daily living (ADL) to assess their suitability for early active movement protocols. Methods: In this in vitro study, composite cylinders simulating PIJ arthrodesis were subjected to standardized fusion angles of 40° using different fixation techniques, including crossed K-wires, compression screws, cerclage wires, tension band wiring, anatomical fixation plates, and locking grid plates. Forces representing ADLs such as typing, holding a pencil, carrying weight, and opening a jar were applied using a universal testing machine in a four-point bending setup. Micromotion and gap clearance were calculated and analyzed. Results: Techniques involving compression, such as compression screws, tension bands, and cerclage wires, exhibited lower micromotion and gap clearance under forces up to 17 N, suggesting potential suitability for early active movement protocols. In contrast, fixation plates demonstrated structural failure or excessive clearance during early active motion ADLs. K-wires showed intermediate results with moderate gap clearance and micromotion. Conclusions: Compression-based fixation techniques for PIJ arthrodesis may permit early active movement without external stabilization, while fixation plates are prone to failure under ADL forces. Further dynamic biomechanical testing and clinical studies are recommended to confirm these findings. Full article

Background and Objectives: This study compares the biomechanical performance of a new-generation implant designed for patella fracture fixation with the traditional tension band method. Its goal is to assess fracture fixation’s stability and the new implant’s potential advantages in reducing complications such as skin irritation, pain, and implant failure. Materials and Methods: In this experimental study, 20 calf patellae were divided into two groups. The first group was treated with the traditional tension band method, while the second group received the new-generation implant, designed using finite element analysis (FEA) for optimization. Both groups underwent biomechanical testing with axial forces at a 45° flexion angle to simulate real-life load conditions. The maximum forces at which mechanical insufficiency occurred were recorded. Data were analyzed using SPSS for statistical comparison. Results: Finite element analysis revealed that the new-generation implant provided better fracture line stability than the tension band method under applied forces. In the biomechanical tests, the maximum force at which mechanical insufficiency occurred was significantly higher in the new-generation implant group (1130 ± 222 N) compared to the tension band method group (680.5 ± 185.4 N), with a statistically significant difference (p = 0.008). The new implant demonstrated superior fixation, with better resistance to distraction forces. Conclusions: The new-generation implant offers enhanced biomechanical stability compared to the traditional tension band method, particularly regarding fixation strength under applied forces. This study supports the potential of the new implant to improve fixation stability and reduce common complications associated with patella fracture surgeries. Further testing in more extensive human cadaver studies is recommended to confirm these findings and assess long-term clinical outcomes. Full article

Background: Temporary hemiepiphysiodesis with tension band plates or eight-plates is a common surgical procedure to treat malalignment of the lower limb axis in skeletally immature patients. The objective of this study was to compare a new minimally invasive surgical procedure with the conventional procedure and evaluate its safety and effectiveness in order to reduce the risk of hypertrophic scarring, which may cause functional impairment as well as cosmetic issues. Methods: Sixty-five growth plates of either the femur or the tibia were evaluated in 33 patients treated for genu valgum or varum between 2010 and 2017. Each growth plate was considered an individual case. The modified procedure was used in 17 cases and the conventional procedure in 48 cases. The modified surgical procedure is characterized by an 8 mm incision and preparation of the epi-periosteal layer, in which the eight-plate is positioned via a guide-wire. Positioning and implantation are controlled via fluoroscopy. Skin incision length, duration of surgery, revision rate, achievement of a defined correction goal, and correction rate were analyzed. Results: Using the minimally invasive procedure, the mean skin incision length (23.94 $\pm$ 10.18 mm vs. 8.75 $\pm$ 2.14 mm, p < 0.001) could be significantly reduced. No significant difference was found in regard to the duration of surgery, revision rate, achievement of the correction goal or correction rate. Conclusions: The minimally invasive procedure results in a reduction in incision length without significant impact on the duration of surgery, revision rate, achievement of correction goal or correction rate. Consequently, the modified procedure can be regarded as equally as effective and safe as the conventional procedure. Full article

This study evaluates the impact of Kirschner wire (K-wire) insertion direction on the biomechanical properties of combined tibial plateau leveling osteotomy (TPLO) and tibial tuberosity transposition (TTT) procedures in small-breed dogs with cranial cruciate ligament rupture and medial patella luxation. Twenty-one cadaveric tibiae were divided into two groups; the specimens were divided into two groups; one underwent TPLO-TTT with a proximal pin placement (Group TTP), and the other received TPLO-TTT with a distal pin placement (Group TTD). For both pin placements, two additional subgroups were formed: one with a 0.56 mm tension band (Groups TTP0.56 and TTD0.56) and the other with a 0.76 mm tension band (Groups TTP0.76 and TTD0.76). The tensile force was applied, and failure load and mode were recorded. The distal pin direction in Group TTD0.56 exhibited a significantly higher mean failure load (380.1 N) compared to the proximal pin direction in Group TTP0.56 (302.2 N, p = 0.028). No significant differences were observed among the other groups. This study concludes that distal pin placement can provide similar or improved mechanical stability in cases with limited space for proximal pin placement during combined TPLO and TTT procedures. Full article

Patellar fractures represent approximately 1% of all fractures and the pattern is influenced by the quality of the bone and the energy of the trauma. Transverse fractures are associated with extensor mechanism failure and interruption of joint congruence. Patellar fractures are generally fixed using tension band principles, through K-wires and metal cerclage. The tension band was conceived to transform the considerable tensile force applied to the patella into a compressive one to obtain a stable fixation. The use of metal implants might be associated with a significant discomfort, mostly related to the irritating action of K-wires and cerclage on the surrounding soft tissues, often leading to the need for implant removal. Therefore, we introduced an original technique for fix patellar fractures by using only a non-adsorbable braided polyblend suture. Postoperative care included progressive range of motion recovery using an articulated knee brace and a specific protocol. The suture-only tension band technique seems to be a useful technique in terms of complications and reoperation rate while allowing secure and early mobilization. Full article

Background and Objectives: Patella baja is a common complication after operative treatment for patellar fracture. This study aimed to investigate (1) the serial changes in patellar height and (2) the potential predictive factors for patellar height changes after tension band wiring (TBW) for patellar fractures. Materials and Methods: Forty-one patients who underwent TBW for patellar fracture between March 2019 and September 2022 were enrolled. To identify serial changes in patellar height, modified Blackburne–Peel index (mBPI) was assessed at just after surgery, at 3 months, at 6 months, at 1 year and at the final follow-up. Multiple regression analysis was conducted to identify factors correlated with mBPI difference between the contralateral side (considered as preoperative status) and injured side. Results: The postoperative mBPI exhibited a decline over time (mean mBPI immediately post operation/3 months/6 months/1 year/final follow-up: 0.69/0.63/0.63/0.62/0.61) Specifically, mBPI showed a significant reduction immediately post operation to 3 months (p < 0.001), although comparisons at other time points did not reveal significant differences. A lower position of the fracture was associated with a decrease in patellar height after surgery. Conclusions: Patellar height was mainly decreased from immediately post operation to 3 months. A fracture in a lower position of associated with decreased patellar height after the TBW of the transverse patellar fracture. Full article

Background: Olecranon fractures are common injuries of the upper limb in adults. Simple displaced trasverse fractures are generally surgically treated with tension-band wiring (TBW) or plate fixation (PF). The purpose of this retrospective study is to compare the clinical-functional outcome, complications and reoperation rates between TBW and PF for Mayo IIA fractures. Methods: 72 patients treated with PF or TBW at our institution, completed our survey and clinical evaluation and their demographic and clinical data were recorded and analysed. The clinical-functional outcomes were evaluated assessing ROMs and three validated scoring systems: the Disabilities of the Arm, Shoulder, and Hand (DASH), the Mayo Elbow Performance Score (MEPS) and the Patient American Shoulder and Elbow Surgeons Standardized Elbow Assessment score (pASES-e). Results: 38 patients (53%) underwent TBW and 34 (47%) PF. The mean DASH, MEPS and pASES-e scores were respectively 14.5 ± 17.2, 80.5 ± 14.7 and 83.6 ± 12.4 in the TBW group and 21 ± 21.7, 75.6 ± 15.3 and 75.1 ± 19.2 in the PF group (p = 0.16, p = 0.17 and p = 0.03). The mean duration of surgery and hospitalisation period were longer in the PF group (p = 0.002, p = 0.37) whereas the complication and reoperation rates were higher after TBW (p = 0.15, p = 0.24). Conclusions: According to the literature, both TBW and PF resulted comparable valid surgical options for the treatment of simple isolated displaced olecranon fractures. Our results corroborate previous findings, showing good/excellent outcomes without significant differences. Full article

Background: The purpose was to compare the clinical and radiographic outcomes between preoperative mild and severe varus deformity after total knee arthroplasty (TKA) with medial stabilizing technique (MST). Methods: We retrospectively analyzed 158 knees of 125 female patients with a 2-year follow-up who underwent mechanically aligned TKA with MST between April 2018 and February 2021. Patients were divided into two groups; the severe varus group was defined as one with preoperative hip-knee ankle (HKA) angle ≥ 15° and the mild varus group with HKA angle < 15°. Pre- and post-operative clinical outcomes (Western Ontario and McMaster University Osteoarthritis Index, Knee Society Knee Score) and radiographic outcomes (medial proximal tibial angle (MPTA), HKA angle, lateral distal femoral angle (LDFA), joint line distance, and femoral component rotation angle) were compared between the groups. Results: Among the 158 knees analyzed, 131 and 27 were allocated to the mild and severe varus groups, respectively. Preoperative data showed that the MPTA (84.7° ± 2.8° vs. 80.7° ± 3.2°, p < 0.001) was significantly less in the severe varus group. In postoperative data, clinical outcomes were not different between the groups. Joint line distance (18.4 mm ± 2.8 mm vs. 18.6 mm ± 2.7 mm, p = 0.676) was also not significantly different. Femoral component rotation angle (−1.7° ± 1.0° vs. −1.0° ± 1.3°, p = 0.018) was more externally rotated in the severe varus group. Conclusions: Severe varus group showed comparable clinical and radiographic outcomes to that of mild varus group after mechanically aligned TKA with MST. Full article

Patella fractures usually occur as a result of direct trauma to the anterior knee joint, indirect injury as a result of eccentric muscle contraction, or rapid knee flexion against a contracted quadriceps muscle. The patella functions as part of the extensor mechanism of the knee, where large forces are transmitted, and its subcutaneous nature has made treatment of patella fractures a challenge. In this review article, we evaluate how the management of these fractures has evolved over time and the advantages associated with the various treatment techniques. There are few comparative studies looking at the different treatment types for fractures of the patella, with the goal of achieving a functional extensor mechanism with low rates of post-traumatic arthritis and metal-work irritation. Full article

Background: Chaput tubercle fractures, located at the attachment site of the anterior inferior tibiofibular ligament (AITFL) on the distal tibia, have the potential to destabilize the syndesmosis joint. This study aims to assess the effectiveness of tension band wiring (TBW) as a surgical intervention for managing Chaput fractures and the consequent syndesmosis instability. Methods: A retrospective review of patient charts was undertaken for those who had undergone ankle fracture surgery from April 2019 through May 2022. The surgical procedure involved direct fixation of the Chaput fractures using the TBW method. Radiological assessments were performed using postoperative simple radiographs and computed tomography (CT) scans, while clinical outcomes were evaluated using the Olerud–Molander Ankle Score (OMAS) and the visual analog scale (VAS). Results: The study included 21 patients. The average OMAS improved significantly, rising from 5.95 preoperatively to 83.57 postoperatively. Similarly, the average VAS score dropped from 7.95 before the surgery to 0.19 thereafter. Minor wound complications were reported by three patients, and one case of superficial infection was resolved with antibiotic therapy. Conclusions: Our findings suggest that the TBW technique is an effective surgical approach for treating Chaput fractures and associated syndesmosis instability. It provides reliable fixation strength and leads to improved long-term functional outcomes. Further research is needed to compare the TBW technique with alternative methods and optimize the treatment strategies for these complex ankle fractures. Full article

A two-year-old male Pomeranian dog was presented to a veterinary hospital due to the side effects of a surgical correction for patellar luxation. Stifle joint arthrodesis (SJA) was performed on the patient’s right leg using autologous bone-grafting techniques. The right femur and tibial joint were angled 120–130°, and an SJA plate was fixed on the front of the two bones. After performing joint fusion of the right limb, medial-patellar-luxation-(MPL)-corrective surgery was performed to cut the tibial tuberosity on the left leg, and the fixing force was increased using the figure-of-eight-tension-band-wiring technique. Results were recorded regarding the dog’s ability to walk and trot in the right hind limb; these results were evaluated for 27 days after surgery. It was difficult for the patient to walk because weight-bearing had not been carried out for 3 days after the surgery; short strides and partial weight bearing were possible 5 to 7 days after surgery. After 10 days, the patient was able to move while bearing weight with a slight disruption. With regard to trotting, the patient showed intermittent normal steps 5 to 7 days after surgery, but the disruption continued. After 14 days, trotting was possible, and it was observed that movement could be maintained during everyday activities. Full article

Background: Osteoarthritis of the proximal interphalangeal (PIP) joint of the finger often leads to global hand-function detriment. Different techniques for the arthrodesis of the proximal interphalangeal joint have been described that all lead to union in a reasonable percentage of patients and period of time. This biomechanical study aims to analyze and compare the primary stability of different techniques of arthrodesis to render postoperative immobilization unnecessary. Methods: Arthrodeses of 40° of composite cylinders were tested with different techniques in four-point bending for stability in extension as well as flexion. Results: In extension, the compression screw and the compression wires showed the highest stability—whereas in flexion, plate fusion was superior. Tension band, cerclage or compression screw fusion showed the best compromise in flexion/extension stability. Conclusions: Fusion techniques that apply compression to the fusion show superior stability. Cerclage, tension band and compression screws might be able to provide enough stability to withstand the forces exerted during unencumbered activities of daily living. Arthrodesis with plates should be limited to patients with special indications and require immobilization during consolidation. Full article

This paper presents the principle, design, fabrication, and characterization of Molecular Electronic Transducer (MET) dual-axis tilt sensors. The proposed sensor has a 3D-printed cylindrical channel inserted with four double-band electrodes and partially filled with a liquid electrolyte. The double-band electrodes were fabricated by wire winding with a ~0.1 mm anode-cathode distance under controlled tension. It allows the electrode to become any 3D coil rather than a 2D structure by microfabrication and exhibits good repeatability ($\pm 10\%$). The tilting changes the electrolyte level and electrode-electrolyte contact area, resulting in Faradaic current changes. The x-axis and the y-axis sensitivity reach 0.121 V/° and 0.154 V/°, respectively. Full article

Few reports have described direct fixation of the Chaput tubercle; screw fixation is usually employed. Herein, we introduce a novel technique for Chaput tubercle fixation using tension-band wiring. This technique is applicable to fractured tubercles of various sizes and has the advantage that the fragment breakage that may occur during screw fixation is impossible. In addition, our technique increases fixation strength. Full article

Mandibular fractures are commonly encountered by the maxillofacial surgeon. Maxillomandibular fixation (MMF) and open reduction and internal fixation (ORIF), or a combination of both, are the accepted standard treatments. This study aims to assess the role of a conservative minimal intervention protocol in the management of undisplaced/minimally displaced fractures of the dentate portion of the adult mandible and the complications associated with such minimalistic intervention. Thirty-four patients with undisplaced/minimally displaced fractures of the dentate portion of the adult mandible were advised to restrict mouth opening and limit themselves to a soft diet for a minimum of 4 weeks. All patients were advised follow-up at regular intervals for at least 3 months. Five patients were lost to follow-up. Symphysis and parasymphysis fractures were the most common fracture locations. Fourteen patients needed tension band stabilization with a mandibular arch bar/bridle wiring and three patients required extraction of luxated teeth. All patients showed satisfactory healing except three in whom additional intervention (ORIF) was performed. The improvement in mouth opening was statistically significant. Complications were seen more frequently among smokers and alcoholics. For patients with minimally displaced mandibular fractures, it is necessary to consider if the perceived benefits of intervention justify the associated added costs and possible complications. Patients have to be fully informed about the possible complications while using this minimal intervention protocol. This study concludes that a conservative minimal intervention management protocol for such fractures of the dentate portion of the mandible can produce satisfactory results. Full article