Search Results (13)

Diesel engines have evolved significantly over the last century while maintaining core qualities such as reliability, durability, and fuel economy. Currently, the viability of their continued use is under discussion, mainly due to the environmental impact of polluting emissions from conventional fossil fuels. An advantage of these engines is their high fuel flexibility, which includes the capability to operate with pure vegetable oils. Following the established limitations of large-scale conventional biodiesel use, this perspective explores the implementation of straight vegetable oils (SVOs) blended with low-viscosity, low-octane (LVLC) oxygenated solvents to address climate targets such as the “Fit for 55” agenda. The discussion examines the potential of these advanced biofuels to contribute to the 2050 carbon neutrality goals while addressing the technical and economic requirements of the transport sector. Full article

This study evaluates the performance of biofuels created from triple blends of fossil diesel, sunflower or castor oil (SVOs), and 2-Ethylhexyl Nitrate (EHN), a low-viscosity, high-cetane (LVHC) solvent. EHN reduces the viscosity of SVOs to enable their use in conventional diesel engines without compromising fuel properties. The results show that the power output from these blends is similar to or greater than that of fossil diesel, with comparable fuel consumption. Furthermore, the blends significantly reduce emissions of carbon monoxide (CO) and soot, though NOx emissions are slightly higher due to the nitrogen content in EHN. However, NOx levels remain within permissible limits. The substitution of fossil diesel could be further enhanced if EHN were produced using green hydrogen and lignocellulosic biomass, making it a renewable and sustainable biofuel component. These findings support the potential of EHN/SVO biofuel blends to replace a significant portion of fossil diesel in conventional diesel engines while maintaining performance and reducing harmful emissions, except for a slight increase in NOx. Full article

In this research work, the feasibility of using fusel oil, a by-product of the sugar–alcohol industry, as an LVLC solvent in blends with straight vegetable oils (SVOs) and diesel was investigated. Concretely, diesel/fusel oil/sunflower oil (D/FO/SO) and diesel/fusel oil/castor oil (D/FO/CO) triple blends were prepared and characterized by measuring the most important physicochemical properties, i.e., viscosity, density, cold flow properties, flash point and cetane number. An appreciable improvement in cold flow values has been achieved with triple blends, without compromising properties such as calorific value and cetane number. Likewise, the triple blends meet the viscosity and density requirements specified by the European quality standard EN 14214 and the American standard ASTM D6751. After characterization, the triple blends were used on a diesel engine, evaluating different parameters such as power output, opacity, exhaust emissions (CO and NO_x) and consumption at different engine loads. The results indicate that as the biofuel content in the blend increases, engine power decreases while fuel consumption rises. Nevertheless, the values obtained with D/FO/CO are better than those for D/FO/SO and are also very similar to those of fossil diesel. Regarding opacity values and NO_x emissions obtained with the utilization of the triple blends, they are lower than those produced by diesel. However, in the case of CO emissions, it depends on the type of oil used, with the samples prepared with castor oil exhibiting the best results. Full article

To provide technical and economical solutions regarding management of plastic waste, which is constantly increasing worldwide, this study addresses the possibility of using plastic oils (PO) obtained from these plastic wastes as biofuels. To this end, the replacement of the fossil diesel employed in internal combustion diesel engines with triple diesel/PO/vegetable oil mixtures has been investigated. Sunflower (SO) and castor oil (CO) mixed with PO in the most appropriate proportion are evaluated as pure vegetable oils (SVO). Thus, diesel/PO/SVO triple blends were prepared, characterized, and then tested on a diesel engine operating as electricity generator, evaluating power output, consumption, and exhaust emissions. The obtained results show that, with the incorporation of relatively small quantities of pure, non-edible vegetable oils, in double mixtures of PO/SO and PO/CO, an effective alternative fuel for transport is obtained, that allows for 100% of fossil diesel to be replaced. In fact, with these double PO/SVO biofuel mixtures, higher engine power values and lower consumption levels are obtained than those achieved with fossil diesel. Regarding exhaust emissions, these are produced with a slightly greater opacity than with fossil diesel, but there are lower values of carbon gases as a whole (CO + CO₂) and in NO_x gases. Full article

Many countries are immersed in several strategies to reduce the carbon dioxide (CO₂) emissions of internal combustion engines. One option is the substitution of these engines by electric and/or hydrogen engines. However, apart from the strategic and logistical difficulties associated with this change, the application of electric or hydrogen engines in heavy transport, e.g., trucks, shipping, and aircrafts, also presents technological difficulties in the short-medium term. In addition, the replacement of the current car fleet will take decades. This is why the use of biofuels is presented as the only viable alternative to diminishing CO₂ emissions in the very near future. Nowadays, it is assumed that vegetable oils will be the main raw material for replacing fossil fuels in diesel engines. In this context, it has also been assumed that the reduction in the viscosity of straight vegetable oils (SVO) must be performed through a transesterification reaction with methanol in order to obtain the mixture of fatty acid methyl esters (FAMEs) that constitute biodiesel. Nevertheless, the complexity in the industrial production of this biofuel, mainly due to the costs of eliminating the glycerol produced, has caused a significant delay in the energy transition. For this reason, several advanced biofuels that avoid the glycerol production and exhibit similar properties to fossil diesel have been developed. In this way, “green diesels” have emerged as products of different processes, such as the cracking or pyrolysis of vegetable oil, as well as catalytic (hydro)cracking. In addition, some biodiesel-like biofuels, such as Gliperol (DMC-Biod) or Ecodiesel, as well as straight vegetable oils, in blends with plant-based sources with low viscosity have been described as renewable biofuels capable of performing in combustion ignition engines. After evaluating the research carried out in the last decades, it can be concluded that green diesel and biodiesel-like biofuels could constitute the main alternative to addressing the energy transition, although green diesel will be the principal option in aviation fuel. Full article

Low or zero carbon fuels are crucial for maritime transportation decarbonization goals. This paper assesses potential localities for maritime biofuels (biobunkers) production in Brazil, Europe, South Africa, and United States considering geographical, logistic, and economic aspects. This assessment combines georeferenced and techno-economic analyses to identify suitable fuel production hotspots based on not only plant performance and costs but also on logistic integration and biomass seasonality. Five technology pathways were considered: Straight vegetable Oils (SVO), Hydrotreated Vegetable Oils (HVO), Fischer–Tropsch Biomass-to-liquids (FT-BTL), Alcohol oligomerization to middle distillates (ATD), and Hydrotreated Pyrolysis Oil (HDPO). Findings reveal that biomass concentration in Brazil makes it the region with highest biobunker potential, which are mostly close to coastal areas and surpasses regional demand. Although other regions registered more limited potentials, hotspots proximity to ports would enable fossil fuel replacements in these areas. For all cases, biobunker costs (USD 21–104/GJ) are higher than conventional marine fuels prices (USD 11–17/GJ). Only 15% of the hotspots’ carbon prices that would allow its competitiveness are lower than USD 100/tCO₂. Alternatives to incentivize biobunker production would be, first, to establish mandatory fuel blends and second, to join forces with other sectors that would be benefited from the co-production of advanced biofuels. Full article

Dimethyl carbonate (DMC) is an interesting blending component for diesel fuel (D) owing to the high oxygen content (53 wt.%) and the absence of C–C bonds in its structure. Moreover, DMC can be produced from CO₂ and methanol, which provides a renewable way to reduce anthropogenic CO₂. This research has been addressed to assess the use of DMC as a solvent of sunflower oil (SO) and castor oil (CO), with the purpose of obtaining biofuels that can replace fossil diesel as much as possible. The blending of DMC with straight vegetable oils (SVOs) reduces their high viscosity, allowing their usage as drop-in biofuels without chemical treatments. Based on viscosity requirements of European Standard EN 590, the optimal DMC/SVO double blends have been tested as direct biofuels by themselves or mixed with fossil diesel in D/DMC/SVO triple blends. Relevant physico-chemical properties of fuels have been analyzed. Engine parameters such as power output, brake-specific fuel consumption (BSFC) and soot emissions have been studied to determine the effect of new biofuels on efficiency of a diesel engine. An outstanding engine efficiency is shown by the studied D/DMC/SVO triple blends, either with SO or CO as an SVO. The low calorific value of DMC is the main reason for reduction in power and BSFC, as the amount of diesel in the triple blends is reduced. Experimental results demonstrate that the use of these biofuels allows the replacement of up to 40% of fossil diesel, without compromising the power and BSFC of the engine, and accomplishing optimal cold flow properties and a marked drop in exhaust emissions. Full article

The main objective of this work is to contribute to a gradual replacement process of fossil diesel (D) with biofuels composed by diethyl carbonate (DEC) and either sunflower or castor oil, as straight vegetable oils (SVOs). DEC is a very interesting candidate as an oxygenated additive not only because of its low price and renewable nature, but also its favorable fuel properties, such as very low kinematic viscosity, high cetane number, high oxygen content, rich cold flow properties and good miscibility with fossil diesel and vegetable oils. In this work, the more suitable DEC/SVO biofuels are chosen based on kinematic viscosity, according to the European normative. Additionally, the most relevant physical–chemical properties of (bio)fuels such as density, calorific value, cloud point, pour point and cetane number are determined. The influence of DEC on engine performance and exhaust emissions is analyzed by fueling a conventional Diesel engine with the different D/DEC/SVO triple and DEC/SVO double mixtures. The tests results are also compared with commercial diesel. From the results, it is concluded that Diesel engine fueled with the blends studied exhibits an excellent performance in terms of power output, very similar to diesel. Additionally, the use of these blends can remarkably decrease smoke emissions down to 98%, with respect to fossil diesel. The addition of DEC shows a significant improvement in cold flow properties of fuel mixtures in the exchange of a slightly higher brake specific fuel consumption (BSFC) than diesel. Interestingly, the pure biofuels composed by DEC and SVO allow for a suitable engine operation and achieve the lowest emissions, which means these blends can be successfully employed in current engines without adding fossil diesel, i.e., their use entail a 100% renewability. Full article

Today, biofuels are indispensable in the implementation of fossil fuels replacement processes. This study evaluates ethyl acetate (EA) as a solvent of two straight vegetable oils (SVOs), castor oil (CO), and sunflower oil (SO), in order to obtain EA/SVO double blends that can be used directly as biofuels, or along with fossil diesel (D), in the current compression-ignition (C.I.) engines. The interest of EA as oxygenated additive lies not only in its low price and renewable character, but also in its very attractive properties such as low kinematic viscosity, reasonable energy density, high oxygen content, and rich cold flow properties. Revelant fuel properties of EA/SVO double and D/EA/SVO triple blends have been object of study including kinematic viscosity, pour point (PP), cloud point (CP), calorific value (CV), and cetane number (CN). The suitability of using these blends as fuels has been tested by running them on a diesel engine electric generator, analyzing their effect on engine power output, fuel consumption, and smoke emissions. Results obtained indicate that the D/EA/SO and D/EA/CO triple blends, composed by up to 24% and 36% EA, respectively, allow a fossil diesel substitution up to 60–80% providing power values very similar to conventional diesel.In addition, in exchange of a slight fuel consumption, a very notable lessening in the emission of pollutants as well as a better behavior at low temperatures, as compared to diesel, are achieved. Full article

Preheated Schizochytrium sp. raw microalgae oil (MAO) was evaluated as a fuel in a single-cylinder four-stroke diesel engine to produce a comparative study of MAO and diesel oil (DO) critical parameters. In particular, brake power, brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), in-cylinder pressure (CP), exhaust gas temperature (EGT), both nitrogen oxides (NOx) and carbon monoxide (CO) emissions were investigated. Additionally, an engine durability test for longevity was undertaken over a 30-h period, using raw MAO as the fuel. The study demonstrated that the preheated MAO could be successfully used in a diesel engine smoothly. The use of MAO reduced the engine brake power by 26% and increased brake-specific fuel consumption by 20%. The most significant finding from this research study is that there was a significant reduction in NOx and CO emission by 42% and 60% when using raw MAO, respectively. Therefore, these findings demonstrate that algae oil is a highly credible fuel for use in diesel engines and offers a promising solution to diesel engine emissions. Full article

The present paper investigates the feasibility of using acetone (ACE) in triple blends with fossil diesel (D) and straight vegetable oils (SVOs) as alternative fuel for diesel engines. In this respect, ACE is selected as an oxygenated additivedue to its favorable propertiesto be mixed with vegetable oils and fossil diesel. In fact, the very low kinematic viscosity allows reduces the high viscosity of SVOs. ACE’s oxygen content, low autoignition temperature, and very low cloud point and pour point values highlight its possibilities as an additive in D/ACE/SVO triple blends. Moreover, ACE can be produced through a renewable biotechnological process, an acetone–butanol–ethanol (ABE) fermentation from cellulosic biomass. The SVOs tested were castor oil (CO), which is not suitable for human consumption, and sunflower oil (SO), used as a standard reference for waste cooking oil. The viscosity measurement of the ACE/SVO double blend was considered crucial to choose the optimum proportion, which better fulfilled the specifications established by European standard EN 590. Moreover, some of the most significant physicochemical properties of D/ACE/SVO triple blends, such as kinematic viscosity, cloud point, pour point, and calorific value, were determined to assess their suitability as fuels. The blends were evaluated in a conventional diesel generator through the study of the following parameters: engine power, smoke emissions, and fuel consumption. Despite the low calorific value of ACE limits its ratio in the mixtures due to engine knocking problems, the experimental results reveal an excellent performance for the blends containing up to 16-18% of ACE and 22-24% of SVO. These blends produce similar engine power as to fossil diesel, but with slightly higher fuel consumption. Considerable reductions in emissions of air pollutants, as well as excellent cold flow properties are also obtained with these triple blends. In summary, the use of these biofuels could achieve a substitution of fossil diesel up to 40%, independently on the SVO employed. Full article

The aim of this work is to analyze the effect of using diethyl ether (DEE) as an oxygenated additive of straight vegetable oils (SVOs) in triple blends with fossil diesel, to be used in current compression ignition (C.I.) engines, in order to implement the current process of replacing fossil fuels with others of a renewable nature. The use of DEE is considered taking into account the favorable properties for blending with SVO and fossil diesel, such as its very low kinematic viscosity, high oxygen content, low autoignition temperature, broad flammability limits (it works as a cold start aid for engines), and very low values of cloud and pour point. Therefore, DEE can be used as a solvent of vegetable oils to reduce the viscosity of the blends and to improve cold flow properties. Besides, DEE is considered renewable, since it can be easily obtained from bioethanol, which is produced from biomass through a dehydration process. The vegetable oils evaluated in the mixtures with DEE were castor oil, which is inedible, and sunflower oil, used as a standard reference for waste cooking oil. In order to meet European petrodiesel standard EN 590, a study of the more relevant rheological properties of biofuels obtained from the DEE/vegetable oil double blends has been performed. The incorporation of fossil diesel to these double blends gives rise to diesel/DEE/vegetable oil triple blends, which exhibited suitable rheological properties to be able to operate in conventional diesel engines. These blends have been tested in a conventional diesel engine, operating as an electricity generator. The efficiency, consumption and smoke emissions in the engine have been measured. The results reveal that a substitution of fossil diesel up to 40% by volume can be achieved, independently of the SVO employed. Moreover, a significant reduction in the emission levels of pollutants and better cold flow properties has been also obtained with all blends tested. Full article

This research evaluates the possibility of using straight oils such as castor oil, which is not suitable for food use, and sunflower oil, used as a standard reference for waste cooking oils, in blends with gasoline as second-generation biofuels. To this end, a study of the rheological properties of biofuels obtained from these double blends has been carried out. The aim is to take advantage of the different properties of gasoline, i.e., its low viscosity and its high energy density to obtain blends whose rheological properties allow the substitution of fossil diesel in high extent. The incorporation of fossil diesel to these gasoline/oil mixtures produces diesel/gasoline/oil triple blends, which exhibited the suitable rheological properties to be able to operate in conventional diesel engines. Therefore, the behavior of these blends has been evaluated in a conventional diesel engine, operating as an electricity generator. The triple blends allow the substitution of fossil diesel up to 40% with sunflower oil, and up to 25% with castor oil, with excellent power results achieved for blends in which diesel is substituted up to 40%, and also in fuel consumption at high demand in comparison to conventional fossil diesel. Besides, a significant reduction in the emission of pollutants has also been obtained with these triple blends. Full article