Search Results (4)

The reprocessing of metallurgical wastes to recover much-needed metals such as copper not only ensures an adequate supply of metals but also contributes to the cleaning of the environment. A copper smelter in Namibia accumulated significant amounts of spent refractory bricks that are enriched with metal values including copper. This supposedly waste material can potentially serve as a supplement to the ore concentrate, as a smelter feedstock for this toll smelter. Representative samples of crushed bricks, designated as Sample 1 and Sample 2, were used for mineralogical characterisation and flotation test work. The assays for Sample 1 and Sample 2 were 14% Cu and 18% Cu, respectively. Microscopy results identified various copper phases including metallic Cu, bornite, malachite and chalcopyrite. Batch flotation tests were conducted to investigate the effect of grind size (P₈₀ of 53, 75 and 106 μm), pulp pH (natural pulp pH, 10, 10.5 and 11) and collector (potassium amyl xanthate, PAX) dosage (70, 100 and 130 g/t) on the recovery of copper, concentrate grade and weight recovery. In some tests, a co-collector (dithiophosphate, DTP) and sulphidiser (Na₂S) were also added in the quest to maximise the recovery of copper. Based on the test conditions investigated in this study, the grind size is the key variable affecting the recovery of copper. The best copper recovery of 86% (with a weight recovery in the range of 42 to 45% (w/w) and concentrate grade of 37% Cu) was achieved for the finest grind size of 53 μm. The reagent suite that yielded the best recovery was 70 g/t PAX with no addition of the sulphidiser while the pH was 10. There is scope for developing the process routes to recover other valuable metals such as iron, lead and zinc that are also in the spent bricks, as well as potential reuse of the spent bricks (after recovering valuable metals) to make new refractory bricks. Full article

Aluminium smelter waste (ASW) is a big contributor to landfills, and its recycling has been of great interest. This study investigates the tribological properties of aluminium matrix syntactic foams manufactured using an Al 6082 alloy and ASW. Ball-on-disc tests were conducted under both dry and lubricated conditions. Under dry sliding conditions, the coefficient of friction (COF) had an initial sharp increase, followed by a gradual decrease and finally a steady state as the sliding distance increased. The wear surfaces showed the presence of adhesive, abrasive and oxidative wear, with some presence of delamination. Syntactic foams containing small ASW particles led to a decrease in surface roughness, decrease in the average COF and decrease in specific wear. Heating large ASW particles before manufacturing the syntactic foams enhanced overall wear properties because the particles are hardened due to a compositional change. The T6 treatment of the syntactic foams enhanced the wear properties due to the hardening of the Al matrix. The average COF of the ASW syntactic foams was higher than that of the E-sphere syntactic foam, which was predominantly abrasive wear. The specific wear of the ASW syntactic foams can be higher or lower than the E-sphere syntactic foam, depending on the ASW particle size. Under lubricated sliding test conditions, the wear was reduced significantly, and the type changed from predominantly adhesive to predominantly abrasive. The porous ASW particles acted as lubricant reservoirs and provided a constant supply of lubricant, further improving the lubrication effect. Full article

Slags from the ferrous and nonferrous metallurgical industries have been used to treat toxic contaminants in water and wastewater. Using slag as a recycling or renewable resource rather than a waste product has environmental and economic benefits. Recycled smelter slags can be used in both in situ and ex situ treatment. However, their application has some limitations. One of the challenges is how to handle spent slag adsorbents, as they contain the accumulation of solid waste loaded with high concentrations of toxic contaminants. These challenges can be overcome by regeneration, recycling, reuse, and immobilization treatment of spent slag adsorbents. The present paper explored the scientific and technical information about the composition, reaction mechanisms, adsorption capacity, and opportunities of recycled slags while adsorbing toxic compounds from contaminated water. It comprehensively reviewed the current state of the art for using smelting slags as sustainable adsorbents for water and wastewater. The study revealed that ferrous slags are more effective in removing a wide range of toxic chemicals than nonferrous smelter slags. It investigated the necessary improved approach through the 5Rs (i.e., reduce, reuse, recycle, remove, and recover) using smelter slags as reactive materials in ex situ and in situ treatment. Full article

The recycling and utilization opportunities for coal fly ash (CFA) have increased in the past two decades. However, limited commercialization of the material is still reported, while disposal and management remain major concerns. CFA utilization is currently commercially feasible in the building and construction industry. Other alternative uses that are being explored involve the extraction of valuable metals and the purification of wastewater. The CFA-produced adsorbent material utilized in wastewater purification processes should be able to generate water that meets the legal quality requirements for reutilization in alternative applications. On the other hand, in the recovery of metallic components such as smelter-grade alumina, high recovery and high purity products are only achievable through the processing of CFA using expensive and energy—intensive processes. Furthermore, most of the current CFA recycling processes tend to generate secondary solid residues (SSR), which can cause environmental pollution, thus requiring further downstream processing. In this context, this paper reviews and discusses current research on CFA recycling methods, challenges and opportunities associated with resource recovery from CFA, and the acceptability of the value-added products, and it therefore proposes sustainable processes for CFA utilization. This review further suggests that to successfully compete with bauxite for production of smelter-grade alumina, other saleable value-added products such as Ti, Fe and the REEs should be recovered by engineering an integrated process design. The generated SSR in each process must also be characterized, recycled and re-used to reduce waste production and advance the circular economy concept. The review concludes that for CFA to become considered as a more attractive commercial resource, there is need for its complete and holistic utilization in high volumes and in different applications to offset its low value. Full article