Search Results (30)

Objective: Fluoride is widely recognized for its preventive role against secondary caries. This systematic review aimed to evaluate how environmental and material factors influence fluoride ion release from metal-reinforced glass ionomer cements. Methods: A structured literature search was performed in March 2025 across PubMed, Scopus, and Web of Science databases. Search terms included combinations of fluoride release AND glass ionomer AND silver OR zinc OR strontium OR copper. The study selection process followed PRISMA 2020 guidelines and was organized using the PICO framework. Out of 281 initially identified records, 153 were screened based on titles and abstracts. After applying predefined eligibility criteria, 23 studies met the inclusion requirements and were included in the qualitative analysis. Results: Among the 23 included publications, 12 involved glass ionomers modified with silver, and 6 of these reported an increase in fluoride release. Seven studies focused on zinc-modified cements, and four examined materials reinforced with strontium. Conclusions: The addition of strontium, titanium oxide, silver nanoparticles, or zirconium oxide increases the release of fluoride ions, while sintered silver reduces it. There is a great discrepancy among researchers regarding the effect of the addition of zinc oxide and its appropriate amount in the glass ionomer material. Full article

The development of biocompatible, conductive hydrogels via direct ink writing (DIW) has gained increasing attention for strain sensor applications. In this work, a hydrogel matrix composed of polyvinyl alcohol (PVA) and κ-carrageenan (KC) was formulated and enhanced with polyvinylidene fluoride (PVDF) and silver nanoparticles (AgNPs) to impart piezoelectric properties. The ink formulation was optimized to achieve shear-thinning and thixotropic recovery behavior, ensuring printability through extrusion-based 3D printing. The resulting hydrogels exhibited high water uptake (~280–300%) and retained mechanical integrity. Rheological assessments showed that increasing PVDF content improved stiffness without compromising printability. Electrical characterization demonstrated that AgNPs were essential for generating piezoelectric signals under mechanical stress, as PVDF alone was insufficient. While AgNPs did not significantly alter the crystalline phase distribution of PVDF, they enhanced conductivity and signal responsiveness. XRD and SEM-EDX analyses confirmed the presence and uneven distribution of AgNPs within the hydrogel. The optimized ink formulation (5% PVA, 0.94% KC, 6% PVDF) enabled the successful fabrication of functional sensors, highlighting the material’s strong potential for use in wearable or biomedical strain-sensing applications. Full article

Ultrafiltration is essential for wastewater treatment, but it faces challenges such as selectivity, control, and fouling reduction. Incorporating nanoparticles into membranes enhances retention, boosts permeability, and limits fouling, improving overall performance. This study explores the properties of PVDF/Ag-ZnO composite membranes, highlighting the influence of silver-doped zinc oxide nanoparticles on membrane structure, performance, and antimicrobial effect. The non-solvent-induced phase separation (NIPS) method successfully led to the preparation of composite membranes; this method used different doses of silver-doped zinc oxide (Ag-ZnO) nanoparticles with Poly(vinylidene fluoride) (PVDF). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and water contact angle measurements were used to validate the influence of nanoparticles on the composite membrane (PVDF/Ag-ZnO) structure. Conversely, morphology (porosity, surface rigorosity), hydrophilicity, and permeability were analyzed through contact angle, image analysis, and flux measurement. In addition, the membranes were tested for antimicrobial activity against E. coli. Membrane performance shows that the incorporation of 20% w/w Ag-ZnO resulted in improved water permeability, which was about 2.73 times higher than that of a pure PVDF membrane (192.2 L·m⁻²·h⁻¹·bar⁻¹). The membrane porosity showed a linear increase with the number of NPs. The resultant asymmetric membrane was altered to increase the number of pores on the top surface by 61% and the cross-sectional pore surface by 663%. Furthermore, a high antibacterial activity of Ag-ZnO 20% was shown. Full article

This study focuses on preparing piezoelectric polyvinylidene fluoride (PVDF) nanocomposites reinforced with silver nanoparticles (AgNPs) using an electrospinning process. The aim of this study is to assess AgNPs’ influence on the piezoelectric properties of PVDF and, therefore, create an optimal piezoelectric composite with enhanced properties, enabling its application in various fields both as sensor and actuator. Because electrical stimuli have proven to have a positive influence in tissue engineering, combined with AgNPs, which have antimicrobial properties, these composites demonstrate a promising opportunity for application as biomedical scaffolds. The proposed scaffolds were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. In addition, mechanical properties are studied through tensile tests, while piezoelectric response is measured on an in-house built setup coupling mechanical stimuli and electrical response monitoring. An experimental test was combined with numerical simulations through the COMSOL Multiphysics version 6.3 software package, and this paper also presents a short review of the numerical and analytical methods used for the modelling and simulation of piezoelectric composites. Full article

Piezoelectric materials based on polyvinylidene fluoride (PVDF) are widely regarded as ideal candidates for the fabrication of piezoelectric energy harvesters (PEHs). However, the relatively low power output of PVDF limits its widespread application and poses a significant challenge to the advancement of PEHs. To address this issue, we have designed a novel PEH using silver-modified lead zirconate titanate/PVDF (pPZT@Ag/PVDF), which achieves a remarkable balance between high output performance and long-term stability. The pPZT@60Ag/PVDF PEH generates a peak voltage of 14.33 V, which is about 2.6 times that of the pure lead zirconate titanate/PVDF (pPZT/PVDF) PEH. This enhancement is attributed to the confined structure within the PVDF fibers, as well as the enhancement in dipole orientation alignment and the local electric field induced by silver nanoparticle modification. Furthermore, the pPZT@60Ag/PVDF PEH demonstrates a peak power density of 0.58 μW/cm², with negligible degradation in output voltage after 6000 bending cycles, and efficiently harvests mechanical energy from human movement. This study presents an effective method for fabricating high-performance PEHs, which is expected to advance the development of next-generation energy harvesting devices. Full article

Research with nanoparticles for the treatment and prevention of dental caries is of special interest given the high prevalence of the disease worldwide. Several studies support the use of nanoparticles associated with materials given their antimicrobial properties and potential demineralization reduction. This study aimed to evaluate the impact of the application of silver nanoparticles (AgNPs) and chitosan gel in combination with commercial fluoride varnish on the remineralization of dental enamel. Ninety-six tooth blocks were macroscopically evaluated via stereomicroscopy, ICDAS II, and laser fluorescence. Enamel blocks were subjected to artificial demineralization and divided into four exposure groups (24, 48, 120, and 168 h), and five different remineralizing agents were applied, namely, FV (fluoride varnish), FV + CG (fluoride varnish + chitosan gel), FV + AgNPs (fluoride varnish + AgNPs), FV + AgNPs + CG (fluoride varnish + AgNPs + chitosan gel), and AgNPs + CG (AgNPs + chitosan gel). Enamel surface changes were evaluated via laser fluorescence, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Laser fluorescence results obtained from demineralized blocks and subsequently exposed to remineralizing treatment indicate significant differences. After exposure to remineralizing agents, hydroxyapatite and modified apatite phases were identified mainly in the samples treated with FV + AgNPs + CG in the groups exposed for 24, 48, and 120 h. The FV + AgNPs + CG and AgNPs + CG indicate good performance in terms of the Ca/P ratio in in vitro demineralization compared to the group treated with fluorine varnish. Full article

Bacterial infections are a common cause of clinical complications associated with the use of orthodontic microimplants. Biofilm formation on their surfaces and subsequent infection of peri-implant tissues can result in either exfoliation or surgical removal of these medical devices. In order to improve the properties of microimplants, hybrid coatings enriched with silver nanoparticles, calcium, and phosphorus were investigated. The present study aimed to assess the microstructure of commercially available microimplants composed of a medical TiAlV (Ti6Al4V) alloy covered with organic–inorganic layers obtained by the sol–gel method using the dip-coating technique. The microstructures and elemental surface compositions of the sterile, etched, and layer-modified microimplants were characterized by scanning electron microscopy with X-ray energy-dispersive spectroscopy (SEM-EDS). Elements such as silver (Ag), calcium (Ca), phosphorus (P), silicon (Si), oxygen (O), and carbon (C) were detected on the microimplant’s surface layer. The SEM observations revealed that control microimplants (unetched) had smooth surfaces with only manufacturing-related embossing, while etching in hydrofluoric acid increased the surface roughness and introduced fluoride onto the microimplants. Layers with only silver nanoparticles reduced the roughness of the implant surface, and no extrusion was observed, while increased roughness and emerging porosity were observed when the layers were enriched with calcium and phosphorus. The highest roughness was observed in the microimplants etched with AgNPs and CaP, while the AgNPs-only layer showed a reduction in the roughness average parameter due to lower porosity. Enhancing the effectiveness of microimplants can be achieved by applying selective surface treatments to different parts. By keeping the outer tissue contact area smooth while making the bone contact area rough to promote stronger integration with bone tissue, the overall performance of the implants can be significantly improved. Full article

Background: Anti-cariogenic properties of silver nanoparticles and fluorides have been probed mainly in vitro and with the objetive to evaluate the remineralizing effects of an applied silver nanoparticle compound plus fluoride varnish, a randomized split-mouth clinical trial was conducted in children aged 6 to 7 years. Methods: The project was approved by the ethics committee of the faculty. Primary molars were randomly distributed into two groups, as follows: Group A was treated with a compound based on silver nanoparticles plus fluoride varnish (SNP-FV), and Group B was treated with a silver diamine fluoride compound (SDF-KI), which is the current standard treatment. Laser fluorescence with a DIAGNOdent pen was used for the evaluation, with follow-up examinations at 15 days, 6 months, and 12 months. ANOVA test was used to compare the groups. The results showed a decrease in demineralization was observed after treatment with SNP-FV; similar results were observed after treatment with SDF-KI. Within each group, there were favorable changes. In the SDF-KI group, the differences in demineralization were 25.63 at 15 days, 29.37 at 6 months, and 30.6 at one year (p < 0.05). Meanwhile, in the SNP-FV group, the decreases were 22.7 at 15 days, 28.78 at 6 months, and 31.11 at one year (p < 0.05). Conclusions: The SNP-FV combined treatment represents an alternative remineralizing treatment for the management of carious lesions in the dentin of primary molars. Full article

Silver nanoparticles have unique physical, chemical, and biological properties that make them attractive for medical applications. They have gained attention in dentistry for their potential use in caries management. This study reviews the different synthesis methods of silver nanoparticles and the application of them for caries management. Silver nanoparticles are tiny silver and are typically less than 100 nanometres in size. They have a high surface area-to-volume ratio, making them highly reactive and allowing them to interact with bacteria and other materials at the molecular level. Silver nanoparticles have low toxicity and biocompatibility. Researchers have employed various methods to synthesise silver nanoparticles, including chemical, physical, and biological methods. By controlling the process, silver nanoparticles have defined sizes, shapes, and surface properties for wide use. Silver nanoparticles exhibit strong antibacterial properties, capable of inhibiting a broad range of bacteria, including antibiotic-resistant strains. They inhibit the growth of cariogenic bacteria, such as Streptococcus mutans. They can disrupt bacterial cell membranes, interfere with enzyme activity, and inhibit bacterial replication. Silver nanoparticles can inhibit biofilm formation, reducing the risk of caries development. Additionally, nano silver fluoride prevents dental caries by promoting tooth remineralisation. They can interact with the tooth structure and enhance the deposition of hydroxyapatite, aiding in repairing early-stage carious lesions. Silver nanoparticles can also be incorporated into dental restorative materials such as composite resins and glass ionomer cements. The incorporation can enhance the material’s antibacterial properties, reducing the risk of secondary caries and improving the longevity of the restoration. Full article

This study focused on preparing composite nanomats by incorporating silver nanoparticles (AgNPs) in polyvinylidene fluoride (PVDF) nanofibers through the electrospinning process. A short review of piezoelectric PVDF-related research is presented. PVDF is known for its biocompatibility and piezoelectric properties. Since electrical signals in biological tissues have been shown to be relevant for therapeutic applications, the influence of the addition of AgNPs to PVDF on its piezoelectricity is studied, due to the ability of AgNPs to increase the piezoelectric signal, along with providing antibacterial properties. The prepared samples were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. In addition, the biological activity of composites was examined using a cytotoxicity assay and an assessment of the antibacterial activity. The obtained results show that the incorporation of AgNPs into PVDF nanofibers further enhances the piezoelectricity (crystalline β-phase fraction), already improved by the electrospinning process, compared to solution-casted samples, but only with a AgNPs/PVDF concentration of up to 0.3%; a further increase in the nanoparticles led to a β-phase reduction. The cytotoxicity assay showed a promising effect of PVDF/AgNPs nanofibers on the MDA-MB-231 breast cancer cell line, following the non-toxicity displayed in regard to the healthy MRC-5 cell line. The antibacterial effect of PVDF/AgNPs nanofibers showed promising antibacterial activity against Pseudomonas aeruginosa and Staphylococcus aureus, as a result of the Ag content. The anticancer activity, combined with the electrical properties of nanofibers, presents new possibilities for smart, multifunctional materials for cancer treatment development. Full article

Supramolecular hydrogels based on low-molecular-weight compounds are a unique class of so-called “soft” materials, formed by weak non-covalent interactions between precursors at their millimolar concentrations. Due to the variety of structures that can be formed using different low-molecular-weight gelators, they are widely used in various fields of technology and medicine. In this study, we report for the first time an unusual self-assembly process of mixing a hydrosol obtained from L-cysteine and silver nitrate (cysteine–silver sol—CSS) with sodium halides. Modern instrumental techniques such as viscosimetry, UV spectroscopy, dynamic light scattering, zeta potential measurements, SEM and EDS identified that adding fluoride anions to CSS is able to form stable hydrogels of a thixotropic nature, while Cl⁻, Br⁻ and I⁻ lead to precipitation. The self-assembly process proceeds using a narrow concentration range of F⁻. An increase in the fluoride anion content in the system leads to a change in the gel network morphology from elongated structures to spherical ones. This fact is reflected in a decrease in the gel viscosity and a number of gel–sol–gel transition cycles. The mechanism of F⁻’s interaction with hydrosol includes the condensation of anions on the positive surface of the CSS nanoparticles, their binding via electrostatic forces and the formation of a resulting gel carcass. In vitro analysis showed that the hydrogels suppressed human squamous carcinoma cells at a micromolar sample concentration. The obtained soft gels could have potential applications against cutaneous malignancy and as carriers for fluoride anion and other bioactive substance delivery. Full article

Polyvinylidene fluoride (PVDF) membranes were coated with TiO₂ and TiO₂-Ag to enhance their efficiency for oil-in-water emulsion separation. The photocatalytic activities of the two modified membranes and their filtration performances were compared in detail. The significantly enhanced photocatalytic activity of the TiO₂-Ag composite was proved using a methyl orange (MO) solution (c = 10⁻⁵ M) and a crude oil emulsion (c = 50 mg·L⁻¹). The TiO₂-Ag-coated membrane reduced the MO concentration by 87%, whereas the TiO₂-modified membrane reached only a 46% decomposition. The photocatalytic reduction in the chemical oxygen demand of the emulsion was also ~50% higher using the TiO₂-Ag-coated membrane compared to that of the TiO₂-coated membrane. The photoluminescence measurements demonstrated a reduced electron/hole recombination, achieved by the Ag nanoparticle addition (TiO₂-Ag), which also explained the enhanced photocatalytic activity. A significant improvement in the oil separation performance with the TiO₂-Ag-coated membrane was also demonstrated: a substantial increase in the flux and flux recovery ratio (up to 92.4%) was achieved, together with a notable reduction in the flux decay ratio and the irreversible filtration resistance. Furthermore, the purification efficiency was also enhanced (achieving 98.5% and 99.9% COD and turbidity reductions, respectively). Contact angle, zeta potential, scanning electron microscopy (SEM), and atomic force microscopy (AFM) measurements were carried out to explain the results. SEM and AFM images revealed that on the TiO₂-Ag-coated membrane, a less aggregated, more continuous, homogeneous, and smoother nanolayer was formed due to the ~50% more negative zeta potential of the TiO₂-Ag nanocomposite compared to that of the TiO₂. In summary, via Ag addition, a sufficiently hydrophilic, beneficially negatively charged, and homogeneous TiO₂-Ag-coated PVDF membrane surface was achieved, which resulted in the presented advantageous filtration properties beyond the photocatalytic activity enhancement. Full article

In this work, nanocomposite membranes were prepared using silver nanoparticles (Ag) attached to poly(amidoamine) dendrimer (P)-functionalised multi-walled carbon nanotubes (CNTs) blended with poly(vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP) polymeric membranes (i.e., AgP-CNT/PVDF-HFP) via the phase inversion method. The nanocomposites were characterised and analysed via transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDX), thermal gravimetric analysis (TGA) and Brunauer–Emmett–Teller (BET) analysis. The TEM and EDX analyses confirmed the presence of Ag nanoparticles on the nanocomposites, while the SEM and BET data showed the spongy morphology of the nanocomposite membranes with improved surface areas. The sample analysis of surface water collected from the Sekhukhune district, Limpopo Province, South Africa indicated that the water could not be used for human consumption without being treated. The nanocomposite membranes significantly reduced the physicochemical parameters of the sampled water, such as turbidity, TSS, TDS and carbonate hardness, to 4 NTU, 7 mg/L, 7.69 mg/L and 5.9 mg/L, respectively. Significant improvements in microbial load (0 CFU/mL) and BOD (3.0 mg/L) reduction were noted after membrane treatment. Furthermore, toxic heavy metals such as chromium, cadmium and nickel were remarkably reduced to 0.0138, 0.0012 and 0.015 mg/L, respectively. The results clearly suggest that the AgP-CNT/PVDF-HFP nanocomposite membrane can be used for surface water treatment. Full article

The novel conductive polyvinylidene fluoride (PVDF) fibrous membrane with high conductivity and sensitivity was successfully prepared via electrostatic spinning and efficient silver reduction technology. Based on the selective dissolution of porogen of polyvinylpyrrolidone (PVP), the porous PVDF fibrous membrane with excellent adsorbability and mechanical strength was obtained, providing a structure base for the preparation of conductive PVDF fibrous membrane with silver nanoparticles (AgNPs-PVDF). The Ag⁺ in the AgNO₃ mixed solution with PVP was absorbed and maintained in the inner parts and surface of the porous structure. After the reducing action of ascorbic acid-mixed solution with PVP, silver nanoparticles were obtained tightly in an original porous PVDF fibrous membrane, realizing the maximum conductivity of 2500 S/m. With combined excellent conductivity and mechanical strength, the AgNPs-PVDF fibrous membrane effectively and sensitively detected strain signals of throat vocalization, elbow, wrist, finger, and knee (gauge factor of 23). The electrospun conductive AgNPs-PVDF combined the characteristics of low resistance, high mechanical strength, and soft breathability, which provided a new and effective preparation method of conductive fibers for practical application in wearable devices. Full article

Researchers have developed novel bioactive materials for caries management. Many clinicians also favour these materials, which fit their contemporary practice philosophy of using the medical model of caries management and minimally invasive dentistry. Although there is no consensus on the definition of bioactive materials, bioactive materials in cariology are generally considered to be those that can form hydroxyapatite crystals on the tooth surface. Common bioactive materials include fluoride-based materials, calcium- and phosphate-based materials, graphene-based materials, metal and metal-oxide nanomaterials and peptide-based materials. Silver diamine fluoride (SDF) is a fluoride-based material containing silver; silver is antibacterial and fluoride promotes remineralisation. Casein phosphopeptide-amorphous calcium phosphate is a calcium- and phosphate-based material that can be added to toothpaste and chewing gum for caries prevention. Researchers use graphene-based materials and metal or metal-oxide nanomaterials as anticaries agents. Graphene-based materials, such as graphene oxide-silver, have antibacterial and mineralising properties. Metal and metal-oxide nanomaterials, such as silver and copper oxide, are antimicrobial. Incorporating mineralising materials could introduce remineralising properties to metallic nanoparticles. Researchers have also developed antimicrobial peptides with mineralising properties for caries prevention. The purpose of this literature review is to provide an overview of current bioactive materials for caries management. Full article