Search Results (18)

Effective hemostasis in deep and irregular wounds remains a critical clinical challenge. To address this, we developed a bioresorbable chitosan composite hydrogel reinforced with short eggshell membrane (ESM) nanofibers, which were obtained through cryogenic grinding. The resulting ESM/CCS hydrogel, crosslinked with citric acid, exhibited significantly enhanced properties compared to pure CCS hydrogel, including a 63% increase in mechanical strength, a two-fold improvement in shape memory, a 25.31% reduction in hemolysis, over 2% higher cytocompatibility, and more than 48% greater hemostatic efficiency. Structural characterization confirmed the successful integration of bioactive chitosan with collagen mimetic ESM nanofibers. This biomimetic approach synergistically combines mechanical reinforcement with biological functionality, highlighting its strong potential as an advanced hemostatic dressing for complex wound management. Full article

A refined mathematical framework is developed to investigate the ability of shape memory alloy (SMA) nanofibers to control the shear instability of a hybrid small-scale plate made of three layers containing nanofibers. The middle layer is reinforced by SMA nanofibers, while typical nanofibers are utilized to reinforce other layers. Using the Brinson theory, the nonlocal theory and the principle of virtual work, the scale-dependent coupled equations of the reinforced ultrasmall plate are presented. A differential quadrature technique is then applied as a solution procedure for different edge conditions. The influences of various factors, including the coefficients of the polymer matrix, the recovery stress, orientation and volume fraction of SMA nanofibers on the control ability are studied. It is concluded that the shear instability capacity of small-scale plates can be reasonably controlled by using SMA nanofibers. Particularly, higher recovery stresses result in higher critical shear loads. As the SMA volume fraction increases, the shear instability load remarkably increases. Full article

Advancements in thermoregulating textiles have been propelled by innovations in nanotechnology, composite materials, and smart fiber engineering. This article reviews recent scholarly papers on experimental passive and active thermoregulating textiles to present the latest advancements in these fabrics, their mechanisms of thermoregulation, and their feasibility for use. The review underscores that phase-change materials enhanced with graphene, boron nitride, and carbon nanofibers offer superior thermal conductivity, phase stability, and flexibility, making them ideal for wearable applications. Shape-stabilized phase-change materials and aerogel-infused fibers have shown promising results in outdoor, industrial, and emergency settings due to their durability and high insulation efficiency. Radiative cooling textiles, engineered with hierarchical nanostructures and Janus wettability, demonstrate passive temperature regulation through selective solar reflection and infrared emission, achieving substantial cooling effects without external energy input. Thermo-responsive, shape-memory materials, and moisture-sensitive polymers enable dynamic insulation and actuation. Liquid-cooling garments and thermoelectric hybrids deliver precise temperature control but face challenges in portability and power consumption. While thermoregulating textiles show promise, the main challenges include achieving scalable manufacturing, ensuring material flexibility, and integrating multiple functions without sacrificing comfort. Future research should focus on hybrid systems combining passive and active mechanisms, user-centric wearability studies, and cost-effective fabrication methods. These innovations hold significant potential for applications in extreme environments, athletic wear, military uniforms, and smart clothing, contributing to energy efficiency, health, and comfort in a warming climate. Full article

Shape-memory polymer nanocomposites (SMPNCs) have emerged as a transformative class of smart materials, combining the versatility of shape-memory polymers (SMPs) with the enhanced properties imparted by nanostructures. Integrating these nanofillers, this review explores the pivotal role of SMPNCs in addressing critical limitations of traditional SMPs, including low tensile strength, restricted actuation modes, and limited recovery stress. It comprehensively examines the integration of nanofillers, such as nanoparticles, nanotubes, and nanofibers, which augment mechanical robustness, thermal conductivity, and shape-recovery performance. It also consolidates foundational knowledge of SMPNCs, covering the principles of the shape-memory phenomenon, fabrication techniques, shape-recovery mechanisms, modeling approaches, and actuation methods, with an emphasis on the structural parameters of nanofillers and their interactions with polymer matrices. Additionally, the transformative real-world applications of SMPNCs are also highlighted, including their roles in minimally invasive medical devices, adaptive automotive systems, 4D printing, wearable electronics, and soft robotics. By providing a systematic overview of SMPNC development and applications, this review aims to serve as a comprehensive resource for scientists, engineers, and practitioners, offering a detailed roadmap for advancing smart materials and unlocking the vast potential of SMPNCs across various industries in the future. Full article

This paper presents the novel development of a shape memory polymer foam based on polymer–polymer nanocomposites. Herein, polylactide (PLA)/biosourced polyamide (PA) foams are fabricated by in situ fibrillation of polymer blends and a subsequent supercritical CO₂ foaming technique. In this system, PLA serves as a shape memory polymer to endow this foam with a shape memory effect (SME), and in situ generated PA nanofibers are employed to reinforce the PLA cell walls and provide an additional permanent phase. A concentration of PA, 5 wt.%, was chosen to form an entangled nanofibrillar network. Foams of PLA/PA nanoblends with the same content of constituents were fabricated to reveal the effect of minor phase morphology on the cell structure and shape memory behavior of polymer foams. Profiting from the reinforcing effect of PA nanofibers, the PLA/PA nanocomposite foam exhibits smaller foam cells, a narrower cell size distribution and a comparable cell concentration than the PLA/PA nanoblend foam. In addition, PA nanofibers, unlike PA nanodroplets, favor the shape fixation ratio and recovery ratio and shorten the shape recovery time. Full article

In situ-generated nanofibrillar polymer–polymer composites are excellent candidates for the production of polymer materials, with high mechanical and SME properties. Their special feature is the high degree of dispersion of the in situ-generated nanofibers and the ability to form entangled nanofiber structures with high aspect ratios through an end-to-end coalescence process, which makes it possible to effectively reinforce the polymer matrix and, in many cases, increase its ductility. The substantial interfacial area, created by the in situ formed fiber/matrix morphology, significantly strengthens the interfacial interactions, which are crucial for shape fixation and shape recovery. Using the polylactide/bio-polyamide (PLA/PA) system as an example, it is shown that in situ PA fibrillation improves the mechanical and shape-memory properties of PLA. The modulus of elasticity increases by a factor of 1.4, the elongation at break increases by a factor of 30, and the shape-strain/fixity ratio and shape recovery increase from 80.2 to 97.4% and from 15.5 to 94.0%, respectively. The morphology of the minor PA phase is crucial. The best result is achieved when a physically entangled nanofibrous network is formed. Full article

Inks for 3D printing were prepared by dispersing bacterial cellulose nanofibers (CNF) functionalized with methacrylate groups in a polymerizable deep eutectic solvent (DES) based on choline chloride and acrylic acid with water as a cosolvent. After 3D printing and UV-curing, the double-network composite gel consisting of chemically and physically crosslinked structures composed from sub-networks of modified CNF and polymerized DES, respectively, was formed. The rheological properties of inks, as well as mechanical and shape memory properties of the 3D-printed gels, were investigated in dynamic and static modes. It was shown that the optimal amount of water allows improvement of the mechanical properties of the composite gel due to the formation of closer contacts between the modified CNF. The addition of 12 wt% water results in an increase in strength and ultimate elongation to 11.9 MPa and 300%, respectively, in comparison with 5.5 MPa and 100% for an anhydrous system. At the same time, the best shape memory properties were found for an anhydrous system: shape fixation and recovery coefficients were 80.0 and 95.8%, respectively. Full article

In 2020, we published a review on the study of semi-crystalline thermoplastic polyurethane elastomers and composites based on the shape memory effect. The shape recovery ability of such polymers is determined by their sensitivity to temperature, moisture, and magnetic or electric fields, which in turn are dependent on the chemical properties and composition of the matrix and the nanofiller. Nanocellulose is a type of nanomaterial with high strength, high specific surface area and high surface energy. Additionally, it is nontoxic, biocompatible, environmentally friendly, and can be extracted from biomass resources. Thanks to these properties, nanocellulose can be used to enhance the mechanical properties of polymer matrices with shape memory effect and as a switching element of shape memory. This review discusses the methods for producing and properties of nanocellulose-based thermo-, moisture-, and pH-sensitive polyurethane composites. The synergistic effect of nanocellulose and carbon nanofillers and possible applications of nanocellulose-based thermoplastic polyurethane biocomposites with shape memory effect are discussed. A brief description of nanocellulose terminology is also given, along with the structure of shape memory thermoplastic polyurethanes. There is significant interest in such materials for three primary reasons: the possibility of creating a new generation of biomaterials, improving the environmental friendliness of existing materials, and exploiting the natural renewability of cellulose sources. Full article

Shape memory nanocomposites are excellent smart materials which can switch between a variable temporary shape and their original shape upon exposure to external stimuli such as heat, light, electricity, magnetic fields, moisture, chemicals, pH, etc. Numerous nanofillers have been introduced in shape memory polymers such as carbon nanotubes, graphene, nanodiamonds, carbon nanofibers, etc. Among nanocarbons, graphene has attracted research interest for the development of shape memory polymer/graphene nanocomposites. Graphene is a unique one-atom-thick two-dimensional nanosheet of sp²-hybridized carbon atoms. Graphene has been used as an effective nanofiller in shape memory polymeric nanocomposites owing to its remarkable electrical conductivity, flexibility, strength, and heat stability. Thermoplastics as well as thermoset matrices have been used to form the shape memory nanomaterials with graphene nanofiller. In shape memory polymer/graphene nanocomposites, their shape has been fixed above the transition temperature and then transformed to the original shape through an external stimulus. The inclusion of graphene in nanocomposites can cause fast switching of their temporary shape to their original shape. Fine graphene dispersion, matrix–nanofiller interactions, and compatible interface development can lead to high-performance shape memory graphene-derived nanocomposites. Consequently, this review focuses on an important class of shape memory graphene-based nanocomposites. The fabrication, physical properties, and shape memory actuation of polymer/graphene nanocomposites are discussed. The stimuli-responsive polymer/graphene nanocomposites mostly revealed heat-, electricity-, and light-induced effects. The inclusion of graphene enhanced the physical/covalent linking, shape recovery, shape fixity, flexibility, and crystallization effects in the polymers. Furthermore, potential applications of these materials are observed in the aerospace/automobile industries, civil engineering, and biomaterials. Full article

With the development of convergence technology, the Internet of Things (IoT), and artificial intelligence (AI), there has been increasing interest in the materials industry. In recent years, numerous studies have attempted to identify and explore multi-functional cutting-edge hybrid materials. In this paper, the international literature on the materials used in hybrid fibers and manufacturing technologies were investigated and their future utilization in the industry is predicted. Furthermore, a systematic review is also conducted. This includes sputtering, electrospun nanofibers, 3D (three-dimensional) printing, shape memory, and conductive materials. Sputtering technology is an eco-friendly, intelligent material that does not use water and can be applied as an advantageous military stealth material and electromagnetic blocking material, etc. Electrospinning can be applied to breathable fabrics, toxic chemical resistance, fibrous drug delivery systems, and nanoliposomes, etc. 3D printing can be used in various fields, such as core-sheath fibers and artificial organs, etc. Conductive materials include metal nanowires, polypyrrole, polyaniline, and CNT (Carbon Nano Tube), and can be used in actuators and light-emitting devices. When shape-memory materials deform into a temporary shape, they can return to their original shape in response to external stimuli. This study attempted to examine in-depth hybrid fiber materials and manufacturing technologies. Full article

Shape-Memory Polymers (SMPs) are considered a kind of smart material able to modify size, shape, stiffness and strain in response to different external (heat, electric and magnetic field, water or light) stimuli including the physiologic ones such as pH, body temperature and ions concentration. The ability of SMPs is to memorize their original shape before triggered exposure and after deformation, in the absence of the stimulus, and to recover their original shape without any help. SMPs nanofibers (SMPNs) have been increasingly investigated for biomedical applications due to nanofiber’s favorable properties such as high surface area per volume unit, high porosity, small diameter, low density, desirable fiber orientation and nanoarchitecture mimicking native Extra Cellular Matrix (ECM). This review focuses on the main properties of SMPs, their classification and shape-memory effects. Moreover, advantages in the use of SMPNs and different biomedical application fields are reported and discussed. Full article

The paper discusses the possibility of using in situ generated hybrid polymer-polymer nanocomposites as polymeric materials with triple shape memory, which, unlike conventional polymer blends with triple shape memory, are characterized by fully separated phase transition temperatures and strongest bonding between the polymer blends phase interfaces which are critical to the shape fixing and recovery. This was demonstrated using the three-component system polylactide/polybutylene adipateterephthalate/cellulose nanofibers (PLA/PBAT/CNFs). The role of in situ generated PBAT nanofibers and CNFs in the formation of efficient physical crosslinks at PLA-PBAT, PLA-CNF and PBAT-CNF interfaces and the effect of CNFs on the PBAT fibrillation and crystallization processes were elucidated. The in situ generated composites showed drastically higher values of strain recovery ratios, strain fixity ratios, faster recovery rate and better mechanical properties compared to the blend. Full article

Shape memory polymers (SMPs) as a relatively new class of smart materials have gained increasing attention in academic research and industrial developments (e.g., biomedical engineering, aerospace, robotics, automotive industries, and smart textiles). SMPs can switch their shape, stiffness, size, and structure upon being exposed to external stimuli. Electrospinning technique can endow SMPs with micro-/nanocharacteristics for enhanced performance in biomedical applications. Dynamically changing micro-/nanofibrous structures have been widely investigated to emulate the dynamical features of the ECM and regulate cell behaviors. Structures such as core-shell fibers, developed by coaxial electrospinning, have also gained potential applications as drug carriers and artificial blood vessels. The clinical applications of micro-/nanostructured SMP fibers include tissue regeneration, regulating cell behavior, cell growth templates, and wound healing. This review presents the molecular architecture of SMPs, the recent developments in electrospinning techniques for the fabrication of SMP micro-/nanofibers, the biomedical applications of SMPs as well as future perspectives for providing dynamic biomaterials structures. Full article

The fabrication of smart biocomposites from sustainable resources that could replace today’s petroleum-derived polymer materials is a growing field of research. Here, we report preparation of novel biocomposites using nanocellulose networks extracted from food residue (onion skin) and a vegetable oil-based bioresin. The resin was synthesized via the Diels-Alder reaction between furfuryl methacrylate and tung oil at various ratios of the components. The onion-skin-extracted cellulose nanofiber and cellulose nanocrystal networks were then impregnated with the resins yielding biocomposites that exhibited improved mechanical strength and higher storage modulus values. The properties of the resins, as well as biocomposites, were affected by the resin compositions. A 190–240-fold increase in mechanical strength was observed in the cellulose nanofiber (CNF) and cellulose nanocrystal (CNC)-reinforced biocomposites with low furfuryl methacrylate content. The biocomposites exhibited interesting shape-memory behavior with 80–96% shape recovery being observed after 7 creep cycles. Full article

Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as “classical” carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account. Full article