Search Results (62)

Hexavalent chromium (Cr (VI)) contamination of water resources constitutes a major environmental and public health issue due to its high toxicity, mobility, and carcinogenic properties. This review examines recent advances in Cr (VI) removal technologies from water and wastewater, with emphasis on membrane-based separation processes and adsorption approaches. Conventional treatment methods, including chemical precipitation, ion exchange (IX), electrocoagulation (EC), electrodeionization (EDΙ), bioremediation, and photocatalysis, are comparatively discussed in terms of removal efficiency, operational limitations, and applicability. In parallel, sustainable adsorbent materials derived from biomass and agricultural waste are evaluated as environmentally friendly and cost-effective alternatives for chromium removal. The role of functional groups, adsorption mechanisms, and redox interactions involved in Cr (VI) reduction and immobilization is also analyzed. Attention is given to membrane technologies, such as reverse osmosis (RO), nanofiltration (NF), electrodialysis (ED), and ultrafiltration (UF) after surface modification with the incorporation of nanomaterials and/or the application of Layer-by-Layer (LBL) assembly techniques, which enhance selectivity, permeability, and antifouling behavior. The reviewed studies demonstrate that advanced membrane systems and bio-based adsorbents can achieve high chromium removal efficiencies while supporting sustainable water treatment practices. Overall, the combination of membrane technologies with functionalized materials represents a promising direction for the development of efficient and environmentally sustainable Cr (VI) remediation systems capable of meeting increasingly strict regulatory limits. Full article

Population growth, industrialization and climate change have placed increasing stress on natural freshwater reserves, making conventional water sources inadequate. Coupled with rising energy constraints and environmental concerns, interest in desalination technologies that can operate more sustainably and efficiently has intensified. Among the available approaches, membrane desalination has gained particular importance because of its modularity, relatively low energy demand, and compatibility with decentralized water treatment. In parallel, thermoelectric devices have emerged as promising components for hybrid desalination systems due to their ability to convert temperature gradients into electricity or provide localized heating and cooling for process enhancement. This article presents a narrative review of thermoelectric integration in desalination systems, with particular emphasis on membrane desalination and membrane-hybrid water treatment configurations powered by renewable-energy or low-grade heat sources. The review examines the role of thermoelectric devices in relation to key membrane-based and hybrid desalination processes, including reverse osmosis, membrane distillation, electrodialysis, nanofiltration, forward osmosis, and selected hybrid systems. Particular attention is given to system configurations, renewable energy coupling pathways, functional roles of thermoelectric devices, water productivity, module output, desalination efficiency, water quality, and economic performance. The reviewed literature indicates that thermoelectric integration can provide meaningful benefits in hybrid desalination, particularly through improved thermal management, enhanced utilization of low-grade heat, and supplementary energy recovery. These opportunities appear especially relevant for thermally driven membrane systems such as membrane distillation and for membrane-hybrid configurations intended for decentralized or renewable-powered applications. However, the available evidence remains highly heterogeneous, with substantial variation in system scale, operating conditions, reporting metrics, and cost assumptions, which limits direct cross-study comparison and broad generalization of performance claims. This review highlights the technical challenges, reporting inconsistencies, and research gaps that currently constrain the practical development of thermoelectric-assisted membrane desalination and outlines future directions for membrane-aligned hybrid desalination research. Full article

Increasing the recovery in electrodialysis desalination may be achieved using a single-pass operation at different linear flow velocity values in the diluate and concentrate compartments. The risk of inner leakage as well as membrane bulging and damage can be minimized by controlling the pressure difference between the diluate and concentrate compartments. This solution has been tested in a pilot plant for initial demineralization of river water using an electrodialyzer of our own design. Both under- and overlimiting regimes have been tested, as well as long work cycles between electrode polarity reversals. Water with a conductivity of about 500 µS/cm was desalinated at a recovery of 70–75%, and the desalination degree was 75–96%. It was also found that the unit cost could be decreased by 52% compared to a commercial solution when the diluate conductivity was 74.3 μS/cm. A deep demineralization, from 511 μS/cm down to 17.9 μS/cm in a single-stage EDR or 8.52 μS/cm in a two-stage EDR, was also confirmed experimentally at the pilot scale. Full article

Reverse electrodialysis (RED) enables the efficient conversion of the chemical potential difference between seawater and freshwater into electricity while simultaneously facilitating hydrogen production for integrated energy utilization. Nevertheless, the widespread deployment of RED remains constrained by the reliance on ruthenium–iridium-coated electrodes, which are expensive and resource-limited. This study proposes the adoption of titanium-based redox electrodes as a replacement for traditional precious metal electrodes and employs a novel spike structure to accelerate hydrogen bubble detachment. The electrochemical performance of titanium electrodes in an RED hydrogen production system was systematically evaluated experimentally. The influences of several parameters on the RED system performance were systematically examined under these operating conditions, including the ruthenium–iridium catalytic layer, operating temperature (15 to 45 °C), electrode rinse solution (ERS) concentration (0.1 to 0.7 M), and flow rate (50 to 130 mL·min⁻¹). Experimental results demonstrate that optimized titanium redox electrodes maintain high electrocatalytic activity while significantly reducing system costs. Under optimal conditions, the hydrogen yield of the Ti redox electrode reached 89.7% of that achieved with the mesh titanium plate coated oxide iridium and oxide ruthenium as electrodes, while the electrode cost was reduced by more than 60%. This is also one of the cost-cutting solutions adopted by RED for its development. Full article

Solar-driven interfacial evaporation desalination technology offers a feasible solution to the global shortage of freshwater resources. However, previous interfacial evaporation technologies have often only focused on the production of freshwater resources, without fully utilizing the high-energy photons in sunlight and the salinity gradient generated after seawater evaporation. In this work, a solar-driven water–hydrogen–electricity (SWHE) co-production system integrated by solar-driven interfacial evaporation (SIE), interface photocatalytic hydrogen evolution (IPHE), and reverse electrodialysis (RE) was proposed. The aim is to enhance the efficiency of solar energy utilization and achieve simultaneous production of freshwater, hydrogen, and electricity. Under 2-sun irradiation, the SWHE device achieved a water generation rate of 0.77 kg m⁻² h⁻¹, a hydrogen generation rate of 8.57 mmol m⁻² h⁻¹, and a highest power density of 2.9 mW m⁻². Outdoor tests demonstrate that the cumulative water production reached 1.6 kg m⁻² over 6 h, with a total hydrogen yield of 12.22 mmol m⁻² and a highest power density of 0.095 mW m⁻², which validated the environmental adaptability of SWHE system. This novel design strategy is expected to provide a novel form of freshwater resources and energy supply for human society. Full article

This paper offers a perspective on the future of energy harvesting through reverse electrodialysis (RED), particularly in systems using seawater and river water as feed solutions. Although significant progress has been made in membrane development and in optimizing flow configurations—through the introduction of alternative spacers and profiled membranes that enhance mixing and reduce polarization—the overall advancement of RED technology has stagnated for nearly a decade. A persistent negative scale factor continues to favor small-scale applications while limiting the feasibility of large-scale power generation. We propose that renewed progress may arise from fractal-inspired system architectures, in which the efficiency of small RED units is preserved and amplified through hierarchical organization and cooperative operation of many such elements. Two conceptual approaches are outlined. The first explores fractal geometries within the intermembrane compartments, focusing particularly on the river water compartment, which typically exhibits the highest ohmic resistance. The second envisions the modular aggregation of numerous cross-flow stacks into large-scale assemblies whose overall performance scales constructively with the number of units. Together, these ideas suggest a new design paradigm in which scalability and efficiency are reconciled through fractal system organization. Full article

The transition towards low-carbon energy systems requires the adoption of emerging renewable technologies that can diversify energy matrices and reduce greenhouse gas emissions. The present study evaluates the technical and economic feasibility of implementing a Reverse Electrodialysis (RED) plant for Salinity Gradient Energy (SGE) generation on the coast of Tuxpan, Veracruz, Mexico. This area has significant freshwater and seawater resources but high fossil-fuel dependence. A conceptual design was developed considering local hydrological and salinity conditions, membrane performance, and pre-treatment requirements. The analysis applied Levelized Cost of Energy (LCOE) and Net Present Value (NPV) methodologies to six water source combinations. Results indicate that the most favorable scenario, combining effluents from the municipal wastewater treatment plant and the Tuxpan river mouth, achieved the highest potential energy yield. However, high capital (USD 1.54 million) and operational costs resulted in negative NPVs, limiting short-term economic viability. Environmental assessment suggests RED could improve water quality and reduce pollutant discharge, though potential construction and operational impacts require mitigation. Despite current cost barriers, RED integration in coastal regions with similar characteristics offers a promising pathway for clean energy generation and environmental restoration, particularly if coupled with cost-reduction strategies and policy incentives. Full article

Cellulose, the most abundant polysaccharide on earth, possesses desirable properties such as biodegradability, low cost, and low toxicity, making it suitable for a wide range of applications. Being a non-conductive material, the structure of the nanocellulose can be modified or incorporated with conductive filler to facilitate charge transport between the polymer matrix and conductive components. Recently, cellulose-based ion exchange membranes (IEMs) have gained strong attention as alternatives to environmentally burdening synthetic polymers in electrochemical energy systems, owing to their renewable nature and versatile chemical structure. This article provides a comprehensive review of the structures, fabrication aspects and properties of various cellulose-based membranes for fuel cells and water electrolyzers, batteries, supercapacitors, and reverse electrodialysis (RED) applications. The scope includes an overview of various cellulose-based membrane fabrication methods, different forms of cellulose, and their applications in energy conversion and energy storage systems. The review also discusses the fundamentals of electrochemical energy systems, the role of IEMs, and recent advancements in the cellulose-based membranes’ research and development. Finally, it highlights current challenges to their performance and sustainability, along with recommendations for future research directions. Full article

Membrane technologies are used in the production of potable water and the treatment of wastewater in the military forces, providing the highest level of contaminant removal at an energy-efficient cost. This review examines the integration and application of membrane technologies, including reverse osmosis, nanofiltration, ultrafiltration, electrodialysis and advanced hybrid systems, in the treatment of wastewater generated at military bases, naval vessels and submarines. Special emphasis is placed on purification technologies for chemically, biologically and radiologically contaminated wastewater, as well as on the recycling and treatment of wastewater streams by mobile systems used in military applications. Given the specific requirements of complex military infrastructures, particularly in terms of energy efficiency, unit self-sufficiency and reduced dependence on logistical supply chains, this work analyses the latest advances in membrane technologies. Innovations such as nanographene membranes, biomimetic membranes, antifouling membrane systems and hybrid configurations of forward osmosis/reverse osmosis and electrodialysis/reverse electrodialysis offer unique potential for implementation in modular and mobile water treatment systems. In addition, the integration and operational use of these advanced technologies serve as a foundation for the development of autonomous military water supply strategies tailored to extreme operational conditions. The continued advancement and optimization of membrane technologies in military contexts is expected to significantly impact operational sustainability while minimizing environmental impact. Full article

The feasibility of an analogous reverse electrodialysis (RED) process for power generation and acid recovery from acidic waste streams in the steel industry is investigated in this study. A comprehensive model was established to simulate the transport phenomena and power generation, which was validated through experimental data. The simulated operation time was 3 h, during which an acid recovery rate of 41.7% was achieved, and the maximum output power density reached 30.37 μW·cm⁻². The results demonstrated a strong dependence of output power density on the acid concentration, with a linear relationship within the tested range of 1.0–3.0 mol·L⁻¹ HCl. An optimal flow rate range was identified that maximized power output, with the best value of 90 mL∙min⁻¹. The differences in energy harvesting between the traditional acid diffusion dialysis process and our analogous RED process were demonstrated via simulation. The importance of system electroneutrality in driving ion migration and forming ionic currents was crucial for effective power generation. The analogous RED process is a promising solution for efficient acid recovery and power generation from industrial acid waste, offering a sustainable treatment approach. Full article

Sustainable development is linked to the achievement of several different objectives, as outlined by the 17 Sustainable Development Goals (SDGs) defined by the United Nations. Among them are the production of clean water and the combat of climate change, which is strictly linked to the use of fossil fuels as a primary energy source and their related CO₂ emissions. Water and energy are strongly interconnected. For instance, when processing water, energy is needed to pump, treat, heat/cool, and deliver water. Membrane operations for water treatment/desalination contribute to the recovery of purified/fresh water and reducing the environmental impact of waste streams. However, to be sustainable, water recovery must not be energy intensive. In this respect, this contribution aims to illustrate the state of the art and perspectives in desalination by reverse osmosis (RO), discussing the various approaches looking to improve the energy efficiency of this process. In particular, the coupling of RO with other membrane operations, like pressure-retarded osmosis (PRO), reverse electrodialysis (RED), and forward osmosis (FO), as well as the osmotic-assisted reverse osmosis (OARO) system, are reported. Moreover, the possibility of coupling a membrane distillation (MD) unit to an RO one to increase the overall freshwater recovery factor and reduce the brine volumes that are disposed is also discussed. Specific emphasis is placed on the strategies being applied to reduce the MD thermal energy demand, so as to couple the production of the blue gold with the fight against climate change. Full article

This review focuses on the use of membrane techniques to recover nutrients from the liquid fraction of digestate (LFD) and emphasizes their role in promoting the principles of the circular economy. A range of membrane separation processes are examined, including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), membrane distillation (MD) and new tools and techniques such as membrane contactors (MCs) with gas-permeable membranes (GPMs) and electrodialysis (ED). Key aspects that are analyzed include the nutrient concentration efficiency, integration with biological processes and strategies to mitigate challenges such as fouling, high energy requirements and scalability. In addition, innovative hybrid systems and pretreatment techniques are examined for their potential to improve the recovery rates and sustainability. The review also addresses the economic and technical barriers to the full-scale application of these technologies and identifies future research directions, such as improving the membrane materials and reducing the energy consumption. The comprehensive assessment of these processes highlights their contribution to sustainable nutrient management and bio-based fertilizer production. Full article

The absorption refrigeration system (ARS) stands as a remarkable device that is capable of efficiently harnessing low-grade thermal energy and converting it into cooling capacity. The reverse electrodialysis (RED) system harvests the salinity gradient energy embedded in two solutions of different concentrations into electricity. An innovative RED–ARS integration system is proposed that outputs cooling capacity and electric energy, driven by waste heat. In this study, a comprehensive mathematical simulation model of a RED–ARS integration system was established, and an aqueous lithium bromide solution was selected as the working solution. Based on this model, the authors simulated and analyzed the impact of various factors on system performance, including the heat source temperature (90 °C to 130 °C), concentrated solution concentration (3 mol∙L⁻¹ to 9 mol∙L⁻¹), dilute solution concentration (0.002 mol∙L⁻¹ to 0.5 mol∙L⁻¹), condensing temperature of the dilute solution (50 °C to 70 °C), solution temperature (30 °C to 60 °C) and flow rate (0.4 cm∙s⁻¹ to 1.3 cm∙s⁻¹) in the RED stacks, as well as the number of RED stacks. The findings revealed the maximum output power of 934 W, a coefficient of performance (COP) of 0.75, and overall energy efficiency of 33%. Full article

Salinity gradient power (SGP) by reverse electrodialysis is a promising method for converting SGP into electricity. Instead of the conventional approach of using seawater and freshwater, an alternative method involves using highly concentrated salt solutions (brines) alongside seawater or brackish water. Key factors influencing SGP via reverse electrodialysis (SGP-RE) include the properties of ion exchange membranes, particularly their thickness. This paper outlines a practical experimental set-up that uses both a cation membrane (CM) and an anion membrane (AM). The system is configured with three compartments: two outer compartments filled with highly concentrated brine (HIGH) and a central compartment containing a lower concentration salt solution (LOW), akin to seawater. The compartments are separated by a CM on one side and an AM on the other. The ion transport rate from the HIGH compartments to the central LOW compartment allows for determining the overall ion transport coefficient for thin membranes. Measurements of ion flux and electrochemical voltage under dynamic equilibrium conditions also enable the estimation of the SGP-RE power density (W/m²). By controlling the temperature of the HIGH and LOW solutions, this experiment further investigates the significant impact of temperature on ion transport characteristics. Full article

In response to the growing demand for potable water, this study presents a practical methodology for designing and fabricating a hybrid desalination system that integrates reverse electrodialysis and electrodialysis using 3D-printing technology. The hybrid system combines the energy generation potential of RED with the salt removal capabilities of ED, reducing energy consumption. Customized reactors were designed to enhance flow distribution and ion exchange, with computational fluid dynamics simulations validating the hydrodynamic performance. The reactors were fabricated using 3D printing, allowing rapid, cost-effective production, with functional reactors constructed in under 24 h. The system achieved a 15% reduction in salt concentration within one hour, with a specific energy consumption of 0.1388 Wh/m³ and a water recovery rate of 50%. These results demonstrate the functionality of the RED-ED hybrid system for achieving energy savings and performing water desalination. This methodology provides a scalable and replicable solution for water treatment applications, especially in regions with abundant salinity gradients and limited freshwater resources, while offering a multidisciplinary approach that integrates physicochemical and engineering principles for effective device development. Full article