Search Results (68)

The Tuztaşı low-sulfidation epithermal Au–Ag deposit (Biga Peninsula, Türkiye) records a multi-stage hydrothermal history that can be interpreted through the trace and rare-earth-element (REE) chemistry of quartz. High-precision LA-ICP-MS analyses of five representative quartz samples (23 ablation spots; 10 analytically robust) reveal two fluid stages. Early fluids were cold, dilute meteoric waters (δ¹⁸O₍H₂O₎ ≈ −6.8 to +0.7‰), whereas later fluids circulated deeper, interacted with felsic basement rocks, and evolved in composition. Mineralized quartz displays marked enrichment in As (raw mean = 2854 ± 6821 ppm; filtered mean = 70 ± 93 ppm; one spot 16,775 ppm), K (498 ± 179 ppm), and Sb (57.8 ± 113 ppm), coupled with low Ti/Al (<0.005) and elevated Ge/Si (0.14–0.65 µmol mol⁻¹). Chondrite-normalized REE patterns show pronounced but variable LREE enrichment ((La/Yb)_n ≤ 45.3; ΣLREE/ΣHREE up to 10.8) and strongly positive Eu anomalies (δEu ≤ 9.3) with slightly negative Ce anomalies (δCe ≈ 0.29); negligible Ce–Eu covariance (r² ≈ 0.05) indicates discrete redox pulses. These signatures indicate chemically evolved, reducing fluids conducive to Au–Ag deposition. By contrast, barren quartz is characterized by lower pathfinder-element contents, less fractionated REE profiles, higher Ti/Al, and weaker Eu anomalies. A composite exploration toolkit emerges: As > 700 ppm, As/Sb > 25, Ti/Al < 0.005, Ge/Si > 0.15 µmol mol⁻¹, and δEu ≫ 1 reliably identify ore-bearing zones when integrated with δ¹⁸O data and fluid-inclusion microthermometry from earlier studies on the same vein system. This study provides one of the first systematic applications of integrated trace-element and REE analysis of quartz to a Turkish low-sulfidation epithermal system, offering an applicable model for vectoring mineralization in analogous settings worldwide. Full article

Rare-earth elements (REEs), including lanthanides, scandium, and yttrium, are important for advanced technologies such as renewable energy systems, electronics, medical diagnostics, and precision agriculture. Despite their relative crustal abundance, REE extraction is impeded by complex geochemical behavior, dispersed distribution, and environmental challenges. This review presents a comprehensive overview of REE geochemistry, mineralogy, and major deposit types including carbonatites, alkaline igneous rocks, laterites, placer deposits, coal byproducts, and marine sediments. It also highlights the global distribution and economic potential of key REE projects. The integration of machine learning has further enhanced exploration by enabling deposit classification and geochemical modeling, especially in data-limited regions. Environmental and health challenges associated with REE mining, processing, and electronic waste (e-waste) recycling are studied, along with the expanding use of REEs in agriculture and medicine. Some recycling efforts offer promise for supply diversification, but significant technological and economic barriers remain. Ensuring a secure and sustainable REE supply will require integrated approaches combining advanced analytics, machine learning, responsible extraction, and coordinated policy efforts. The present review offers a general overview that can be useful for informing future studies and resource-related discussions. Full article

The attributes of Late Paleozoic magmatic events are of paramount significance in elucidating the tectonic evolution of the Ulanhot region, which is located in the middle of the Hegenshan–Heihe tectonic belt (HHTB). This study undertook a comprehensive investigation of the petrography, LA–ICP–MS zircon U–Pb dating, whole rock geochemistry, and zircon Hf isotopes of the Early Carboniferous volcanic rocks. The volcanic rocks are predominantly composed of andesite, schist (which protolith is rhyolitic tuff), and rhyolitic tuff. The results of zircon U–Pb dating reveal that the formation ages of volcanic rocks are Early Carboniferous (343–347.4 Ma). Geochemical characteristics indicate that the andesites possess a comparatively elevated concentration of Al₂O₃, alongside diminished levels of MgO and TiO₂, belonging to the high-K calc-alkaline series. The zircon εHf(t) of the andesites range from −13 to 9.4, while the two-stage Hf model ages span from 697 to 1937 Ma. The felsic volcanic rocks have high contents of SiO₂ and Na₂O + K₂O, low contents of MgO and TiO₂, and belong to high-K to normal calc-alkaline series. The zircon εHf(t) values of the felsic volcanic rocks range from −12.8 to 10, while the two-stage Hf model ages span from 693 to 2158 Ma. The Early Carboniferous volcanic rocks exhibit a notable enrichment in large ion lithophile elements (LILEs, such as Rb, K, Ba) and light rare earth elements (LREEs), depletion in high-field-strength elements (HFSEs, including Nb, Ta, Ti, Hf), as well as heavy rare earth elements (HREEs). The distribution patterns of the rare earth elements (REEs) demonstrate a conspicuous right-leaning tendency, accompanied by weak negative Eu anomalies. These characteristics indicate that the andesites represent products of multistage mixing and interaction between crustal and mantle materials in a subduction zone setting. The felsic volcanic rocks originated from the partial melting of crustal materials. Early Carboniferous igneous rocks formed in a volcanic arc setting are characteristic of an active continental margin. The identification of Early Carboniferous arc volcanic rocks in the Central Great Xing’an Range suggests that this region was under the subduction background of the oceanic plate subduction before the collision and amalgamation of the Erguna–Xing’an Block and the Songnen Block in the Early Carboniferous. Full article

Regolith-hosted rare-earth element (REE) deposits are some of the most important types of REE deposits. The relationship between Late Paleozoic and Early Mesozoic granite and regolith-hosted REE deposits is still poorly studied. Detailed geochronology, geochemistry, and rare-earth mineralogy analyses of Early Triassic granite in the South China Block were conducted. The geochronological results showed that four representative granite samples yielded formation ages of 245 ± 1 Ma, 244 ± 1 Ma, 244 ± 1 Ma, and 244 ± 2 Ma, respectively. The granites show geochemical affinity to A-type granite. They are characterized by enrichment in Rb, Th, and U, are depleted in Ba, Sr, P, and Ti, and show obvious negative Nb and Ta anomalies. They have high light rare-earth element (LREE) and low heavy rare-earth element (HREE) contents, with obvious negative Eu anomalies. They were derived from the partial melting of a sediment source and underwent intense fractional crystallization during the magma evolution process. They contain a certain number of rare-earth-element-bearing minerals, such as monazite, xenotime, apatite, and zircon. Their REE compositions and mineral associations are similar to those of the parent rocks from typical regolith-hosted REE deposits in South China. The highly weathered horizon at the ridge of the granite weathering crust profile has the highest REE content. A comprehensive analysis indicated that the degree of magma evolution, geomorphology, and weathering are important factors controlling the formation of regolith-hosted REE deposits in the area. Full article

Ion-adsorption rare earth deposits are mainly formed by the weathering and leaching of granite ore-forming parent rocks, and heavy rare earth elements (HREEs) are predominantly hosted in this type of deposit. In this study, we focused on the Late Jurassic REE mineralization parent rock, specifically the Shuitou pluton. We employed chronology, petrogeochemistry, and isotope geochemistry to elucidate the REE enrichment process in the granite. The results show that the zircon U–Pb age of the Shuitou pluton is ~150 Ma, and the monazite U–Pb age is ~145 Ma, suggesting that the pluton was formed in the Yanshan Stage. The rocks have high SiO₂ (72.85–75.55 wt%), Al₂O₃ (12.85–14.63 wt%), and K₂O (4.46–5.27 wt%) content, with A/CNK values of 1.05–1.19, differentiation index (DI) values of 87.48–95.59, zircon saturation temperature values of 689–746 °C, Nb/Ta ratios of 2.72–9.54, and Zr/Hf ratios of 7.12–26.11. In addition, the rocks also contain peraluminous minerals such as muscovite and garnet. These characteristics indicate that these rocks belong to highly fractionated S-type granite. The ε_Hf(t) values of zircon and monazite range from −10.04 to −6.78 and from −9.3 to −8.2, respectively, indicating that the magma was primarily derived from Proterozoic metamorphosed sedimentary rocks of crustal origin. In the extensional tectonic setting of South China, a high temperature promotes the melting of REE-enriched accessory minerals, and a higher content of F increases the solubility of REEs in the molten mass. The presence of heavy rare earth minerals, such as garnet, in these rocks contributes to a high content of heavy rare earth elements (HREEs). Additionally, REE-enriched minerals like titanite, bastnaesite, and allanite create the necessary material conditions for the formation of ion-adsorption REE deposits. Full article

The Beishan Orogenic Belt, situated along the southern margin of the Central Asian Orogenic Belt, represents a critical tectonic domain that archives the prolonged subduction–accretion processes and Paleo-Asian Ocean closure from the Early Paleozoic to the Mesozoic. Early Permian magmatism, exhibiting the most extensive spatial-temporal distribution in this belt, remains controversial in its geodynamic context: whether it formed in a persistent subduction regime or was associated with mantle plume activity or post-collisional extension within a rift setting. This study presents an integrated analysis of petrology, zircon U-Pb geochronology, in situ Hf isotopes, and whole-rock geochemistry of Early Permian granites from the Tiancang area in the southern Beishan Orogenic Belt, complemented by regional comparative studies. Tiancang granites comprise biotite monzogranite, monzogranite, and syenogranite. Zircon U-Pb dating of four samples yields crystallization ages of 279.3–274.1 Ma. These granites are classified as high-K calc-alkaline to calc-alkaline, metaluminous to weakly peraluminous I-type granites. Geochemical signatures reveal the following: (1) low total rare earth element (REE) concentrations with light REE enrichment ((La/Yb)_N = 3.26–11.39); (2) pronounced negative Eu anomalies (Eu/Eu* = 0.47–0.71) and subordinate Ce anomalies; (3) enrichment in large-ion lithophile elements (LILEs: Rb, Th, U, K) coupled with depletion in high-field-strength elements (HFSEs: Nb, Ta, P, Zr, Ti); (4) zircon ε_Hf(t) values ranging from −10.5 to −0.1, corresponding to Hf crustal model ages (T_DMC) of 1.96–1.30 Ga. These features collectively indicate that the Tiancang granites originated predominantly from partial melting of Paleoproterozoic–Mesoproterozoic crustal sources with variable mantle contributions, followed by extensive fractional crystallization. Regional correlations demonstrate near-synchronous magmatic activity across the southern/northern Beishan and eastern Tianshan Orogenic belts. The widespread Permian granitoids, combined with post-collisional magmatic suites and rift-related stratigraphic sequences, provide compelling evidence for a continental rift setting in the southern Beishan during the Early Permian. This tectonic regime transition likely began with lithospheric delamination after the Late Carboniferous–Early Permian collisional orogeny, which triggered asthenospheric upwelling and crustal thinning. These processes ultimately led to the terminal closure of the Paleo-Asian Ocean’s southern branch, followed by intracontinental evolution. Full article

Critical metals in coal-bearing strata have recently emerged as a frontier hotspot in both coal geology and ore deposit research. In the Upper Carboniferous coal-bearing “Si–Al–Fe” strata (Benxi Formation) of the North China Craton (NCC), several critical metals, including Li, Ga, Sc, V, and rare earth elements and Y (REY or REE + Y), have been discovered, with notable mineralization anomalies observed across northern, central, and southern Shanxi Province. However, despite the widespread occurrence of outcrops of the “Si–Al–Fe” strata in the northeastern Qinshui Basin of eastern Shanxi, there has been no prior report on the critical metal content in this region. Traditionally, the “Si–Al–Fe” strata have been regarded as a primary source of clastic material for the surrounding coal seams of the Carboniferous–Permian Taiyuan and Shanxi Formations, which are known to display critical metal anomalies (e.g., Li and Ga). Given these observations, it is hypothesized that the “Si–Al–Fe” strata in the northeastern Qinshui Basin may also contain critical metal mineralization. To evaluate this hypothesis, new outcrop samples from the “Si–Al–Fe” strata of the Benxi Formation in the Yangquan area of the northeastern Qinshui Basin were collected. Detailed studies on critical metal enrichment were assessed using petrographic observations, mineralogy (XRD, X-ray diffractometer), and geochemistry (XRF, X-ray fluorescence spectrometer, and ICP-MS, inductively coupled plasma mass spectrometer). The results indicate that the siliceous, ferruginous, and aluminous rocks within the study strata exhibit varying degrees of critical metal mineralization, mainly consisting of Li and REY, with minor associated Nb, Zr, and Ga. The Al₂O₃/TiO₂, Nb/Y vs. Zr/TiO₂, and Nb/Yb vs. Al₂O₃/TiO₂ diagrams suggest that these critical metal-enriched layers likely have a mixed origin, comprising both intermediate–felsic magmatic rocks and metamorphic rocks derived from the NCC, as well as alkaline volcaniclastics associated with the Tarim Large Igneous Province (TLIP). Furthermore, combined geochemical parameters, such as the CIA (chemical index of alteration), Sr/Cu vs. Ga/Rb, Th/U, and Ni/Co vs. V/(V + Ni), indicate that the “Si–Al–Fe” strata in the northeastern Qinshui Basin were deposited under warm-to-hot, humid climate conditions, likely in suboxic-to-anoxic environments. Additionally, an economic evaluation suggests that the “Si–Al–Fe” strata in the northeastern Qinshui Basin hold considerable potential as a resource for the industrial extraction of Li, REY, Nb, Zr, and Ga. Full article

The petrology, geochemistry, and zircon U-Pb chronology of the Huoshaodian pluton in the Liuba area of the western part of the South Qinling tectonic belt are investigated in this study. The Huoshaodian pluton consists of gabbro, quartz diorite, and granodiorite, and the dominated rock type is quartz diorite. The results indicate that the Huoshaodian pluton belongs to the calc-alkaline series. In the chondrite-normalized REE, all of the samples showed similar patterns, with an enrichment of light REEs and depletion of heavy REEs, but they showed slight differences in the degrees of Eu anomalies. The primitive mantle-normalized trace element diagram reveals an enrichment of large-ion lithophile elements (LILEs) and light rare earth elements (LREEs), as well as depleted high field strength elements (HFSEs). The zircon U-Pb dating results reveal that the gabbro, quartz diorite, and granodiorite have crystallization ages of 214.9 ± 0.58 Ma, 215.0 ± 1.2 Ma, and 215.4 ± 1.9 Ma, respectively, indicating that the Huoshaodian pluton was emplaced during the late Triassic period (214.9–215.4 Ma). In terms of petrogenesis, the gabbro of the Huoshaodian pluton originates from a transitional lithospheric mantle that has undergone fluid metasomatism and partial melting. Specifically, it originated through 1%–2% garnet spinel peridotite undergoing partial melting. In addition, the gabbro underwent a slight degree of contamination by crustal materials during its ascent and intrusion, with some continental crust material being incorporated. The quartz diorite and granodiorite of the Huoshaodian pluton are formed through partial melting processes occurring within the normal lower crust. Combined with the previous studies on the early Mesozoic tectonic evolution of the South Qinling, this study proposes that the formation mechanism of the Huoshaodian pluton may be as follows: in the early Triassic, the Mianlue Ocean subducted northward beneath the Qinling microblock, resulting in a large-scale continental-continental collision between the North China Block and the Yangtze Block; when the oceanic crust subducted to a certain depth, the detachment of the subducting slab triggered the upwelling of mantle material. The heat from mantle-derived magma caused the partial melting of the mafic lower crust, while the mafic magma entered into the upper granitic magma chamber and began to mix. Due to the high viscosity contrast and temperature difference between the two end-member magmas, incomplete mixing led to the formation of a melt with distinct adakitic characteristics and a mafic melt representing mantle-derived material. Full article

Olivine in deep-seated ultramafic xenoliths beneath the North China Block serves as a crucial proxy for decoding the compositions, properties, and evolution of the lithospheric mantle. Here, we conduct an investigation on olivine (including gem-grade) hosted in ultramafic xenoliths from Damaping basalt in the northern part of the North China Block. This contribution presents the results from petrographic, Raman spectroscopic, and major and trace elemental studies of olivine, with the aim of characterising the formation environment and genetic type of the olivine. The analysed olivine samples are characterised by high Mg# values (close to 91%) possessing refractory to fertile features and doublet bands with unit Raman spectra beams of 822 and 853 cm⁻¹, which are indicative of a forsterite signature. Major and trace geochemistry of olivine indicates the presence of mantle xenolith olivine. All the analytical olivine assays ≤0.1 wt % CaO, ~40 wt % SiO₂, and ≤0.05 wt % Al₂O₃. Furthermore, olivine displays significantly different concentrations of Ti, Y, Sc, V, Co, and Ni. The Ni/Co values in olivine range from 21.21 to 22.98, indicating that the crystallisation differentiation of basic magma relates to oceanic crust recycling. The V/Sc values in mantle/xenolith olivine vary from 0.54 to 2.64, indicating a more oxidised state of the mantle. Rare earth element (REE) patterns show that the LREEs and HREEs of olivine host obviously differentiated characteristics. The HREE enrichments of olivine and the LREE depletion of clinopyroxene further assert that the mantle in the Damaping area underwent partial melting. The wide variations of Mg# values in olivine and the Cr# values in clinopyroxene, along with major element geochemistry indicate transitional characteristics of different peridotite xenoliths. This is possibly indicative of a newly accreted lithospheric mantle interaction with an old lithospheric mantle at the time of the basaltic eruption during the Paleozoic to Cenozoic. Full article

The Mingshan reservoir of the Dabie Orogen has a number of Neoproterozoic bimodal intrusive rocks. We focused on the zircon U-Pb chronology, Hf isotopes, and bulk-rock geochemistry of these rocks. The results showed the following: (1) The bimodal intrusive rocks mainly consist of monzogranitic gneiss and plagioamphibolite, with zircon U-Pb ages of 785.0 ± 7.1 Ma and 787.3 ± 6.1 Ma, respectively. These ages indicate that they were formed in the late Qingbaikou epoch of the Neoproterozoic era. (2) The monzogranitic gneiss was dominated by peraluminous features and displayed a strong right deviation of REE (rare-earth element) patterns and a negative δEu anomaly. It is enriched in the LILEs (large-ion lithophile elements) Rb, Ba, and K, but slightly depleted in Nb, Sr, P, and Ti, with low 10,000* Ga/Al values, indicating that it is similar to Al-type granite. The plagioamphibolite belongs to the metaluminous, peraluminous series. It has a Mg^# (molar ratio of Mg to Mg + Fe) of 36.1~55.9 and is enriched in the LILEs Rb, Ba, and K, with a slight positive anomaly of Ba, and is depleted in Nb and Sr. (3) The monzogranite shows negative zircon εHf(t) values ranging from −13.4 to −7.2 and a Paleoproterozoic T_DM2(Hf) (two-stage depleted mantle model age) of 1969–2298 Ma. The zircon εHf(t) values and T_DM2(Hf) of the plagioamphibolite were concentrated around 2.9–5.7 and 1257–1410 Ma, respectively. The geochemistry and Hf isotopes show that the monzogranitic gneiss and plagioamphibolite have distinct magmatic sources. The plagioamphibolite formed from mantle and partial continental crustal materials. The monzogranitic gneiss, on the other hand, was formed as a result of the partial melting of the shallow ancient felsic crust caused by mafic rock heating or upwelling. Taking into account regional correlation, the middle Neoproterozoic bimodal intrusive rocks originated in the structural framework of an extensional setting. Full article

Rare earth elements (REEs) hold significant industrial, scientific, and modern technological worth. This study focused on detecting and quantifying REEs in various geological ore samples. These samples were collected from different REE-bearing locations recommended by geological experts. The analysis was conducted using laser-induced breakdown spectroscopy (LIBS) and laser ablation time-of-flight mass spectrometry (LA-TOF-MS). In this work, LIBS methodology was employed using three different configurations: standard LIBS, LIBS with an applied magnetic field, and LIBS with both an applied magnetic field and target sample heating within an optimal temperature range. Elements from the REE group, specifically lanthanum (La), cerium (Ce), and neodymium (Nd), were identified and quantified. To detect, quantify, and validate the results from LIBS and LA-TOF-MS, we utilized an array of analytical techniques—Energy-Dispersive X-ray Spectroscopy (EDX), Energy-Dispersive X-ray Fluorescence Spectrometer (ED-XRF), and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Interestingly, the quantitative results for REEs (La, Ce, and Nd) in the ore samples obtained using the LIBS technique with various configurations were found to be in agreement with those from LA-TOF-MS, EDX, XRF, and ICP-OES. In addition, LIBS enables detailed microchemical imaging, allowing the map of the spatial distribution of elements within the mineral–ore matrix. The high-resolution microscale elemental mapping of REEs was accomplished using the emission lines Ce (II) at 446.0 nm, La (II) at 492.1 nm, and Nd (II) at 388.8 nm. By integrating multiple analytical techniques, our study enabled the construction of a complete elemental distribution map, providing new insights into the geochemical processes and mineral composition of rare earth ores, while advancing geochemistry and contributing valuable data for rare earth resource exploration. Full article

The ion-adsorption-type rare earth element (iREE) deposits dominantly supply global resources of the heavy rare earth elements (HREEs), which have a critical role in a variety of advanced technological applications. The initial enrichment of REEs in the parent granites controls the formation of iREE deposits. Many Mesozoic and Cenozoic granites are associated with iREE mineralization in the Tengchong block, Southwest China. However, it is unclear how vital the mineralogical and geochemical characteristics of these granites are to the formation of iREE mineralization. We conducted geochronology, geochemistry, and Hf isotope analyses of the Yingpanshan–Damanbie granitoids associated with the iREE deposit in the Tengchong block with the aims to discuss their petrogenesis and illustrate the process of the initial REE enrichment in the granites. The results showed that the Yingpanshan–Damanbie pluton consists of syenogranite and monzogranite, containing REE-bearing accessory minerals such as monazite, xenotime, apatite, zircon, allanite, and titanite, with a high REE concentration (210–626 ppm, mean value is 402 ppm). The parent granites have Zr + Nb + Ce + Y (333–747 ppm) contents and a high FeO^T/MgO ratio (5.89–11.4), and are enriched in Th (mean value of 43.6 ppm), U (mean value of 4.57 ppm), Zr (mean value of 305 ppm), Hf (mean value of 7.94 ppm), Rb (mean value of 198 ppm), K (mean value of 48,902 ppm), and have depletions of Sr (mean value of 188 ppm), Ba (mean value of 699 ppm), P (mean value of 586 ppm), Ti (mean value of 2757 ppm). The granites plot in the A-type area in FeO^T/MgO vs. Zr + Nb + Ce + Y and Zr vs. 10,000 Ga/Al diagrams, suggesting that they are A₂-type granites. These granites are believed to have formed through the partial melting of amphibolites at a post-collisional extension setting when the Tethys Ocean closed. REE-bearing minerals (e.g., apatite, titanite, allanite, and fluorite) and rock-forming minerals (e.g., potassium feldspar, plagioclase, biotite, muscovite) supply rare earth elements in weathering regolith for the Yingpanshan–Damanbie iREE deposit. Full article

With the increasing need for rare-earth elements (REEs) to reach the goals of the ongoing green energy transition, new and innovative methods are needed to identify new primary resources of these critical metals. This study explores the potential to use a non-biased, uniform till dataset to generate evidentiary layers that describe these critical factors and geochemical anomalies to aid mineral potential mapping (MPM) for REEs using machine-assisted methods. The till samples used in this study were collected from the “REE Line”, a sub-region within the Bergslagen lithotectonic province, Sweden, where numerous REE mineralizations occur. Multiple approaches were used in this study to isolate geochemical anomalies using multivariate methods, namely principal component analysis (PCA) and K-means clustering. Additional factors for classifying till samples were also tested, including alteration indices. Using known REE occurrences in Bergslagen as validation points, the results demonstrated the usefulness of multivariate methods applied to till geochemistry for predictive bedrock mapping, and to identify potential areas of REE mineralization within the REE line. The results of the alteration indices showed that the till geochemistry demonstrated similar levels of alteration when compared to the underlying bedrock, allowing for a regional alteration map to be generated. These results show that regional-scale till sampling can provide low-cost data for mineral exploration at the regional scale and generate usable evidentiary layers for GIS-based MPM. Full article

The stratabound barite mineralization occurs in the Ardakan deposit as patches and veins in the dolomites and limestones of the Middle Triassic Shotori Formation. Rare-earth element (REE) geochemistry, O and S isotopes, and fluid inclusion data were used to identify the mode of barite formation. Barite is associated with subordinate fluorite and quartz and, to a lesser extent, with sphalerite, malachite, chrysocolla, and iron and manganese oxide-hydroxides. Barite contains a very low ∑REE concentration (14.80–19.59 ppm) and is enriched in light rare-earth elements (LREEs) relative to heavy rare-earth elements (HREEs). The low ∑REE content and the Ce/La ratio (4.0–6.5) indicate a hydrothermal (terrestrial) origin of the barite. Similar to barite, the ∑REE content in fluorite is low (0.14–6.52 ppm) and suggests a sedimentary setting. The Tb/Ca versus Tb/La diagram also indicates a hydrothermal origin of fluorite. The δ³⁴S values in the barite (+27.9 to +32.4‰) indicate that the sulfur most likely originates from evaporites and/or connate waters from the Late Precambrian to the Lower Cambrian. The δ¹⁸O values (+15.9 to +18.1‰) in the barite show that the oxygen originated either from Late Precambrian–Lower Cambrian evaporites or from basinal brines with slightly higher δ¹⁸O values than the evaporites. The salinity and homogenization temperature ranges of the aqueous fluid inclusions in barite, fluorite, and quartz (0.88–16.89 wt% NaCl equivalent and 90–270 °C, respectively) reveal that the mineralizing fluids were formed from basinal brines with the participation of heated meteoric water. From this, it is concluded that the Ardakan barite deposit was formed by the meeting of heated, ascending sulfate-bearing meteoric water and cooler, Ba-bearing connate water trapped in the overlying Middle Triassic dolomites and limestones. The Ardakan deposit belongs to the structure-related class and the unconformity-related subclass of barite deposits. Full article

The tremolite nephrite deposit in Dahua county, Hechi City, Guangxi province, China is a new genetic type of nephrite deposit. It is hosed by Mg-poor limestone (~1.30 wt.% MgO) and intruded by diabase (~45 wt.% SiO₂). The Mg and Si contents of these rocks are lower than those of the tremolite (58.18 wt.% SiO₂, 13.18 wt.% CaO, 24.16 wt.% MgO), indicating an obviously insufficient source for the metallogenic material that generated the deposit. In particular, some tremolite nephrite ore bodies have no clear contact metamorphism between the host and intrusive rocks, which have the characteristics of stratified mineralization (stratified tremolite nephrite). The origin and mineralization of stratified tremolite nephrite remain poorly constrained. To address this shortcoming, the mineralogy, geochemistry and Sr isotopic of host rock, altered marble, stratified tremolite nephrite and intrusive rock in the Dahua stratified tremolite nephrite deposit were studied. The results show: stratified tremolite nephrite mainly consists of aggregates of microcrystalline-cryptocrystalline tremolites with content exceeding 95%. The in situ rare earth elements (REEs) distribution pattern of hydrothermal calcite in the contact position between stratified tremolite nephrite and marble is similar to that of marine carbonate rock, showing obvious enrichment of HREE, which is different from calcite in limestone and marble. ⁸⁷Sr/⁸⁶Sr of stratified tremolite nephrite is relatively uniform, with an average value of 0.7070, within the range of Permian seawater. The mean value of Y/Ho in the hydrothermal calcite is 51.24, indicating that the marine fluid has not been impregnated by terrigenous materials. In summary, the hydrothermal fluid rich in Ca and Si is formed after marine carbonate rocks are altered by marine fluids. Hydrothermal fluids alter diabase rocks formed by altered minerals like titanite, chamosite, zoisite, etc. This process leads to the formation of metallogenic hydrothermal fluids abundant in Si, Ca, Fe and Mg. The metallogenic hydrothermal fluids migrate in faults and fractures of marble and crystallize to form tremolite nephrite under suitable ore-forming conditions. Full article