Search Results (19)

The Songpan–Ganzi Orogenic Belt (SGOB) is bounded by the South China, North China, and Qiangtang blocks and forms the eastern margin of the Tibetan Plateau. The Tiechanghe Granite is located at the junction of the southeast margin of the SGOB and the western margin of the Yangtze Block. To elucidate the genetic relationship between the Tiechanghe Granite and the surrounding molybdenum deposits in Western Sichuan, in this study, we conducted zircon U-Pb and molybdenite Re-Os isotopic dating. The results indicate that the Tiechanghe Granite predominantly consists of monzogranite, with minor occurrences of syenogranite, while the molybdenum deposits are mainly found in skarn and quartz veins. The laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) zircon U-Pb ages of the Tiechanghe Granite range from 162.9 ± 0.7 Ma (MSWD = 0.31, n = 25) to 163.4 ± 0.6 Ma (MSWD = 0.85, n = 26), and the LA-ICP-MS zircon U-Pb age of the pegmatite veins is 164.1 ± 0.9 Ma (MSWD = 1.3, n = 19). These ages are consistent with the weighted average Re-Os age of the Ziershi molybdenite (160.3 ± 1.6 Ma, n = 2) within the error margins. These findings and previously obtained magmatic and metallogenic ages for the region suggest that a magmatic and mineralization event involving granite, molybdenum, tungsten, and copper occurred at around 162–164 Ma in the study area. This discovery broadens the exploration perspective for mineral resources in the Jiulong area of Western Sichuan and the entirety of Western Sichuan. Full article

The Shimensi super-large tungsten polymetallic deposit is located in the Late Jurassic–Early Cretaceous Porphyry–Skarn tungsten ore belt in the south Yangtze metallogenic belt. There are three types of mineralization: veinlet-disseminated type, thick quartz vein type and hydrothermal cryptoexplosive breccia type. Based on geological studies, this paper presents new petrographic, microthermometric, laser Raman spectroscopic and hydrogen and oxygen isotope research on the fluid inclusions from the deposit. The results show that there are five different types of fluid inclusions: liquid-rich inclusions, vapor-rich inclusions, pure liquid inclusions, pure vapor inclusions, and fluid inclusions containing a solid crystal. The homogenization temperatures of the fluid inclusion range from 140 °C to 270 °C, the salinities are 3 wt.%–5 wt.% NaCl_eq and the densities of ore-forming fluid range from 0.64 g/cm³ to 0.99 g/cm³. For the analyses of laser Raman spectroscopy, the ore-forming fluids can be approximated by a Ca²⁺-Na⁺-SO₄²⁻-Cl⁻ fluid system with small amounts of CO₂, CH₄ and N₂. Otherwise, the data of the pressure, pH and Eh show a fluid metallogenic environment of low pressure, weak acid and weak reduction. The values of the homogenization temperature in the three types of orebodies suggest that the mineralization is characterized by a decrease in temperature under the conditions of fluid immiscibility. The H-O isotope values are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water, and meteoric water is added with the process of magma rising. Full article

The Zhen’an-Xunyang Basin is a late Paleozoic rifted basin with a series of Au-Hg-Sb deposits that have been found, mostly along the Nanyangshan fault. Recently discovered large- and medium-sized gold deposits such as the Xiaohe and Wangzhuang deposits exhibit typical characteristics of Carlin-type gold deposits. Therefore, it is imperative to select a typical deposit for an in-depth study of its metallogenic mechanism to support future prospecting efforts targeting the Carlin-type gold deposits within the area. Based on detailed field investigation and microphotographic observation, four ore-forming stages are identified: I, low-sulfide quartz stage, characterized by euhedral, subhedral pyrite, and fine veins of quartz injected parallel to the strata; II, arsenopyrite–arsenian pyrite–quartz stage, the main mineralization stage characterized by strongly silicified zones of reticulated quartz, disseminated arsenopyrite, fine-grained pyrite; III, low-sulfide quartz stage, characterized by large quartz veins cutting through the ore body or fine veins of quartz; Ⅳ, carbonate–quartz stage, characterized by the appearance of a large number of calcite veins. In situ analysis of trace elements and S isotopes of typical metal sulfides was carried out. The results show significant variations in the trace element compositions of metal sulfides in different stages, among which the main mineralization stage differs notably from those of the Au- and As-low surrounding strata. In situ S isotope analysis reveals δ³⁴S values ranging from 15.78‰ to 28.71‰ for stage I metal sulfides, 5.52‰ to 11.22‰ for stage II, and 0.3‰ to 5.25‰ for stage III, respectively, revealing a gradual decrease in S isotopic values from the pre-mineralization stage to post-mineralization stage, similar to those observed in the Xiaohe gold deposit. These features indicate a distinct injection of relatively low ³⁴S hydrothermal fluids during the mineralization process. The element anomalies of the 1:50,000 stream sediment in the region revealed ore-forming element zonation changing in W→Au (W)→Hg, Sb (Au) anomalies from west to east, manifested by the discovery of tungsten, gold, and mercury–antimony deposits in the area. Moreover, conspicuous Cr-Ni-Ti-Co-Mo anomalies were observed on the western side of the Wangzhuang and Xiaohe gold deposits, indicating a potential concealed pluton related to these deposits. These lines of evidence point to a magmatic–hydrothermal origin for the Carlin-type gold deposits in this area. Furthermore, hydrothermal tungsten deposits, Carlin-type gold deposits, and low-temperature hydrothermal mercury–antimony deposits in this region are probably controlled by the same magma–hydrothermal system. Full article

The recently discovered Daping tungsten deposit is located about 25 km north of Tongcheng County, Hubei Province, in the northern margin of the Sijiapu granite deposit of the Mufushan composite batholith. The ore body is produced in the northeast-oriented greisenization granite and quartz vein, and belongs to the greisen-vein-type scheelite deposit. The resources of the Daping W deposit have a value of 7935 t W and the average grade is 0.201% WO₃. Based on mineralogical and petrographic studies, scheelite is classified into two types. A study of the geochemical characteristics of rare earth elements (REEs) and trace elements indicated that some scheelite specimens showed LREE depletion. Meanwhile, the total amount of scheelite rare earth elements (REEs) is low and the ratio of LREE/HREE ranges from 0.40~2.72 in the Daping W deposit. The contents of REEs and trace elements in the two types of scheelite differ significantly. Type I scheelite has an average ∑REE content of 195.65 ppm, an LREE/HREE value of 0.5, an Eu anomaly (δEu) of 0.78, Mo of 366.20 ppm, Sn of 22.62 ppm, and Sr of 264.80 ppm. However, type II scheelite features an average ∑REE of 111.28 ppm, an LREE/HREE ratio of 1.43, a δEu of 1.56, Mo of 188.48 ppm, Sn of 0.15 ppm, and Sr of 829.93 ppm. The content level of Mo in the two types of scheelite is not high, indicating that this whole metallogenic environment is a reduction environment. However, this is a complex process. The presence of type I scheelite with negative Eu anomalies and relatively high Mo content indicates that the ore-forming environment in the early period of the greisen stage was relatively oxidizing. In contrast, type II scheelite contains large amounts of Sr and large positive Eu anomalies, which are likely to be released from plagioclase in the granite during greisenization. The extremely low composition of Mo in type II scheelite is closely related to the reducing environment in the later period of the greisen stage. Because Mo probably exists in its Mo⁴⁺ state, it may be difficult for it to replace W⁶⁺ in the scheelite lattice. Additionally, comparing the contents of Sn and Sr in different types of scheelite shows that the metallogenic environment changes from relative oxidation to the reduction of scheelite. The variation in trace elements and REEs in scheelite over time reflects a complex magmatic–hydrothermal mineralization environment. Additionally, the Ar–Ar system dating results for muscovite that is closely associated with scheelite in the greisenization granite vein indicate that a muscovite ⁴⁰Ar/³⁹Ar plateau age of about 133 Ma represents the time of tungsten mineralization. This muscovite ⁴⁰Ar/³⁹Ar dating result is close to the previous zircon U-Pb age data of the biotite monzogranite (ca. 140–145 Ma), which is the largest intrusion in the orefield. Meanwhile, the new age data reported here confirm that the Daping tungsten deposit represents a Mesozoic magmatic–hydrothermal mineralization event with a setting of lithospheric extension in the Mufushan composite batholith. Full article

Core samples recovered from exploration boreholes and granite/greisen outcrops at the Panasqueira world-class tungsten deposit in central Portugal were subjected to chemical analyses and petrographic studies. We present a geochemical dataset and the trace element compositions of quartz and micas from a large part of the unexposed Panasqueira granitic pluton. Our data suggest that the hidden granite body is more complicated than previously believed. It consists of a flat cupola of porphyritic granite with only traces of mineralization at Rio and a steep stock of greisenized leucogranite surrounded by a swarm of flat quartz–muscovite veins rich in wolframite between Barroca Grande and Panasqueira. The contents of W (Sn, Nb, Ta) in muscovite markedly drop at a transition from the unmineralized greisen body to quartz veins. The W deposit was formed in three principal stages: (1) intrusion of porphyritic two-mica granite accompanied with local near-contact greisenization and uncommon quartz–wolframite veinlets; (2) intrusion of a more strongly fractionated leucogranite and formation of the cupola and apophyses; (3) circulation of hydrothermal fluids from deeper parts of the granite body into the cupola, greisenization, hydraulic fracturing and opening of flat structures in and outside the cupola and formation of ore veins. Full article

The Zuluhong quartz-vein-type polymetallic deposit, located in the Alatau area of Western Tianshan, China, is a particular and typical tungsten deposit associated with copper. This paper presents major and trace element analyses of magmatic and altered (i.e, chloritized) biotite from the deposit, in order to identify the source of the magmas and characterize the mineralization physical-chemical condition. Magmatic biotite is Fe-rich and has high Rb/Ba ratios (0.27–9.14), indicative of extensive differentiation of granite. Moreover, magmatic biotite has total rare earth element (∑REE) contents that are 5–10% of the whole-rock contents, shows slight light REE depletion, and negative Ce anomalies. Magmatic biotite is enriched in some large-ion lithophile elements (LILE; e.g., Rb and K) and depleted in some high-field-strength elements (HFSE; e.g., Th and Nb). These geochemical features, coupled with geological evidence, indicate that the Zuluhong intrusion is a highly fractionated I-type granite derived from lower crustal melting. During ore formation, magmatic biotite was partially to totally altered to chlorite due to interaction with ore-forming fluids. The temperature and oxygen fugacity decreased during alteration. The mineralization in the Zuluhong polymetallic deposit can be divided into at least two stages. In the early stage, quartz-vein-type wolframite mineralization formed from Si- and volatile-rich fluids that were derived from fractionated granitic magma. In the later stage, W–Cu ores formed as metal sulfides were dominated by chalcopyrite. The later ore-forming fluids experienced a decrease in temperature and oxygen fugacity as they reacted (i.e, chloritization and lesser silicification) with reducing wall rocks around the contact zone of the intrusion. Full article

The Segura mining field, the easternmost segment of the Góis–Panasqueira–Segura tin–tungsten metallogenic belt (north–central Portugal), includes Sn-W quartz veins and Li-Sn aplite-pegmatites, which are believed to be genetically related to Variscan Granites. Sediment geochemistry indicates granite-related Ti-enrichments, locally disturbed by mineralization, suggesting magmatic and metamorphic/metasomatic titaniferous phases. Therefore, Segura alluvial samples and the geochemistry of their TiO₂ polymorphs (rutile, anatase, and brookite) were investigated, and their potential as exploration tools for Sn and W deposits was evaluated. The heavy-mineral assemblages proved to be good proxies for bedrock geology, and TiO₂ polymorph abundances were found to be suitable indicators of magmatic and/or metasomatic hydrothermal processes. The trace element geochemistry of Segura’s alluvial rutile, anatase, and brookite is highly variable, implying multiple sources and a diversity of mineral-forming processes. The main compositional differences between TiO₂ polymorphs are related to intrinsic (structural) factors, and to the P-T-X extrinsic parameters of their forming environments. Anomalous enrichments, up to 9% Nb, 6% Sn and W, 3% Fe, 2% Ta, and 1% V in rutile, and up to 1.8% Fe, 1.7% Ta, 1.2% Nb, 1.1% W 0.5% Sn and V in anatase, were registered. Brookite usually has low trace element content (<0.5%), except for Fe (~1%). HFSE-rich and granitophile-rich rutile is most likely magmatic, forming in extremely differentiated melts, with Sn and W contents enabling the discrimination between Sn-dominant and W-dominant systems. Trace element geochemical distribution maps show pronounced negative Sn (rutile+anatase) and W (rutile) anomalies linked to hydrothermal cassiterite precipitation, as opposed to their hydrothermal alteration halos and to W-dominant cassiterite-free mineralized areas, where primary hydrothermal rutile shows enrichments similar to magmatic rutile. This contribution recognizes that trace element geochemistry of alluvial TiO₂ polymorphs can be a robust, cost- and time-effective, exploration tool for Sn(W) and W(Sn) ore deposit systems. Full article

The Baishitouwa deposit is a medium-scale quartz–wolframite vein-type deposit in the southern Great Xing’an Range tungsten (W) belt. The W mineralization occurs mainly as veins and dissemination within the mica schist of the Mesoproterozoic Baiyunebo Group. The formation of the deposit can be divided into four stages. The wolframite yielded a lower intercept ²⁰⁶Pb/²³⁸U age of 221.0 ± 3.4 Ma (1σ, MSWD = 2.0), which records a late Triassic W mineralization event in the Baishitouwa deposit. In combination with previous geochronological data, we suggest that NE China may have an enormous potential for Triassic W mineralization and more attention should be given to the Triassic ore prospecting in the region. This work highlights that the chemical composition of wolframite is controlled by both the crystallochemical parameters and the composition of the primary ore-forming fluid. Trace-element compositions suggest that wolframite (I) was controlled by the substitution mechanism of 4^A(Fe, Mn)²⁺ + 8^BW⁶⁺ + ^B□ ↔ 3^AM³⁺ + ^AN⁴⁺ + 7^B(Nb, Ta)⁵⁺ + 2^BN⁴⁺, whereas wolframite (II) was controlled by the substitution mechanism of ^A(Fe, Mn)²⁺ + ^A□ + 2^BW⁶⁺ ↔ 2^AM³⁺ + 2^BN⁴⁺. Wolframite (I) contains higher concentrations of Nb, Ta, Sc, and heavy rare earth elements (HREEs), and lower Mn/(Mn + Fe) ratios than wolframite (II). Both wolframite (I) and (II) have similar trace elements and left-dipped REE_N patterns, and analogical Nb/Ta ratios. They have similar Y/Ho ratios to Mesozoic highly fractionated W-mineralized granitoids in NE China. These data indicate that the W mineralization at Baishitouwa is genetically related to an underlying highly fractionated granite, and the compositional variation of fluids is likely driven by crystallization of wolframite during the processes of fluid evolution. A change of the ore-forming fluids from an oxidized to a relatively reduced state during the evolution occurred from stage 1 to 2. Full article

Wolframite-quartz vein-type tungsten deposits constitute the world’s major tungsten resources and are integral to tungsten production. A major share of this mineralization product is found in Southeast China, with other significant resources in the Central Andean belt, the East Australian belt, the Karagwe-Ankole belt and the European Variscan belt. In the past few decades, extensive studies on wolframite-quartz vein-type tungsten deposits have been conducted, but many key questions concerning their ore-forming fluid and metallogenic mechanism remain unclear. Additionally, a summary work on the global distribution and fluid characteristics of these wolframite-quartz vein-type tungsten deposits is still lacking. In this contribution, recent progress regarding several major issues related to the fluid processes involved in the forming of these veins are overviewed, and challenges in terms of future research are proposed. These issues include the nature of ore-forming fluids, their sources, and their transportation and wolframite deposition mechanisms. In particular, the affinity between veins and the exposed granitic intrusion from the Zhangtiantang-Xihuashan ore district, where an as-yet undiscovered deep intrusion, rather than the exposed granitic intrusion, was probably responsible for the formation of the wolframite-quartz veins, is reevaluated. This study also reviews the existing fluid and melt inclusion data from several tungsten deposits to address whether the mineralization potential of the magmatic-hydrothermal systems was directly correlated with the metal contents in the granitic melts and the exsolving fluids. Full article

The newly discovered Juyuan tungsten deposit is hosted in Triassic granite in the Beishan Orogen, NW China. The tungsten mineralization occurred as quartz veins, and the main ore minerals included wolframite and scheelite. The age, origin, and tectonic setting of the Juyuan tungsten deposit, however, remain poorly understood. According to the mineralogical assemblages and crosscutting relationships, three hydrothermal stages can be identified, i.e., the early stage of quartz veins with scheelite and wolframite, the intermediate stage of quartz veinlets with sulfides, and the late stage of carbonate-quartz veinlets with tungsten being mainly introduced in the early stage. Quartz formed in the two earlier stages contained four compositional types of fluid inclusions, i.e., pure CO₂, CO₂-H₂O, daughter mineral-bearing, and NaCl-H₂O, but the late-stage quartz only contained the NaCl-H₂O inclusions. The inclusions in quartz formed in the early, intermediate, and late stages had total homogenization temperatures of 230–344 °C, 241−295 °C, and 184−234 °C, respectively, with salinities no higher than 7.2 wt.% NaCl equiv (equivalent). Trapping pressures estimated from the CO₂-H₂O inclusions were 33−256 MPa and 36−214 MPa in the early and intermediate stages, corresponding to mineralization depths of 3–8 km. Fluid boiling and mixing caused rapid precipitation of wolframite, scheelite, and sulfides. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO₂-rich to CO₂-poor in composition and from magmatic to meteoric, as indicated by decreasing δ¹⁸O_water values from early to late stages. The sulfur and lead isotope compositions in the intermediate-stage suggest that the Triassic granite was a significant source of ore metals. The biotite ⁴⁰Ar/³⁹Ar age from the W-bearing quartz shows that the Juyuan tungsten system was formed at 240.0 ± 1.0 Ma, coeval with the emplacement of granitic rocks at the deposit. Integrating the data obtained from the studies including regional geology, ore geology, biotite Ar-Ar geochronology, fluid inclusion, and C-H-O-S-Pb isotope geochemistry, we conclude that the Juyuan tungsten deposit was a quartz-vein type system that originated from the emplacement of the granites, which was induced by collision between the Tarim and Kazakhstan–Ili plates. A comparison of the characteristics of tungsten mineralization in East Tianshan and Beishan suggests that the Triassic tungsten metallogenic belt in East Tianshan extends to the Beishan orogenic belt and that the west of the orogenic belt also has potential for the discovery of further quartz-vein-type tungsten deposits. Full article

It is common among many vein–type tungsten deposits in southern China that the thickness of ore veins increases from <1 cm to >1 m with increasing depth. A five–floor zonation model for the vertical trend of vein morphology was proposed in the 1960s and has been widely applied for predicting ore bodies at deeper levels, but the causative mechanisms for such a zonation remain poorly understood. The Piaotang tungsten–tin deposit, one of the birthplaces of the five–floor zonation model, is chosen as a case study for deciphering the mechanisms forming its morphological zonation of quartz veins. The vertical trend of vein morphology and its link to the W–Sn mineralization in Piaotang was quantified by statistical distributions (Weibull distribution and power law distribution) of vein thickness and ore grade data (WO₃ and Sn) from the levels of 676 m to 328 m. Then, the micro–scale growth history of quartz veins was reconstructed by scanning electron microscope–cathodoluminescence (SEM–CL) imaging and in situ trace element analysis. The Weibull modulus $\alpha$ of vein thickness increases with increasing depth, and the fractal dimensions of both vein thickness and ore grade data (WO₃ and Sn) decrease with increasing depth. Their vertical changes indicate that the fractures that bear the thick veins were well connected, facilitating fluid focusing and mineralization in mechanically stronger host rocks. Three generations (Q1–Q3) of quartz were identified from CL images, and the CL intensity of quartz is possibly controlled by the concentrations of Al and temperature. From the relative abundance of the Q1–Q3 quartz at different levels, the vertical trend of vein morphology in Piaotang was initially produced during the hydrothermal event represented by Q1 and altered by later hydrothermal events represented by Q2 and Q3. Statistical distributions of vein thickness combined with SEM–CL imaging of quartz could be combined to evaluate the mineralization potential at deeper levels. Full article

The Takatori hypothermal tin–tungsten vein deposit is composed of wolframite-bearing quartz veins with minor cassiterite, chalcopyrite, pyrite, and lithium-bearing muscovite and sericite. Several wolframite rims show replacement textures, which are assumed to form by iron replacement with manganese postdating the wolframite precipitation. Lithium isotope ratios (δ⁷Li) of Li-bearing muscovite from the Takatori veins range from −3.1‰ to −2.1‰, and such Li-bearing muscovites are proven to occur at the early stage of mineralization. Fine-grained sericite with lower Li content shows relatively higher δ⁷Li values, and might have precipitated after the main ore forming event. The maximum oxygen isotope equilibrium temperature of quartz–muscovite pairs is 460 °C, and it is inferred that the fluids might be in equilibrium with ilmenite series granitic rocks. Oxygen isotope ratios (δ¹⁸O) of the Takatori ore-forming fluid range from +10‰ to +8‰. The δ¹⁸O values of the fluid decreased with decreasing temperature probably because the fluid was mixed with surrounding pore water and meteoric water. The formation pressure for the Takatori deposit is calculated to be 160 MPa on the basis of the difference between the pressure-independent oxygen isotope equilibrium temperature and pressure-dependent homogenization fluid inclusions temperature. The ore-formation depth is calculated to be around 6 km. These lines of evidence suggest that a granitic magma beneath the deposit played a crucial role in the Takatori deposit formation. Full article

In situ analyses of trace elements and rare-earth elements (REEs) were performed by use of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) on scheelite samples from the Yingzuihongshan tungsten deposit in western Inner Mongolia Autonomous Region, China. The contents of trace elements Nb, Ta and Mo of scheelite indicate that the ore-forming fluid is magmatic hydrotherm and is exsolved from highly fractionated granitic melt. The scheelite has high REE contents and ∑REE values, and a very inhomogeneous distribution of REEs exists in different scheelite grains or even in one scheelite grain. The cathodoluminescence (CL) images of scheelite grains display well-developed zoning or fine oscillatory zoning. Development of zoning is closely related to the variable contents of REEs, and the darkness of shade of CL images are mainly determined by ∑REE values, but they have no correlation with the distribution patterns of REEs. The chondrite-normalized REE distribution patterns of scheelite are classified as the middle REEs (MREEs)-enriched type, except for a strong negative Eu-anomaly, which could be a REE-flat type and or a MREEs-depleted type. Trace element composition of scheelites from the Yinzuihongshan tungsten deposit reflect that the ore-forming materials mainly came from the crust and the ore-forming fluids are dominantly derived from the granitic magma in an oxidizing environment, in which very dynamic conditions of the hydrothermal system prevailed during precipitation of scheelite. On the basis of the above understanding and field geological featured, we considered that the Yingzuihongshan tungsten deposit is the quartz-vein-hosted tungsten type that is genetically associated with monzonitic granite. Full article

The Chuankou tungsten ore field is situated in the central area of the Xuefeng Uplift Belt in South China. The deposit is characterized by two types of tungsten mineralization: quartz-scheelite veins in both the Neoproterozoic Banxi Group and Devonian Yanglin’ao Formation and quartz-wolframite (scheelite) veins in the Chuankou granite. The host rocks of the Chuankou tungsten Deposit of South China are similar to the stratigraphic sequence of Au-Sb-W deposits in the Xuefeng Uplift Belt. It is thus an appropriate location for the study of scheelite mineralization in the belt, especially the relative contributions of surrounding rocks, magma and hydrothermal fluids. Optical Microscope-Cathodoluminescene (OM-CL) and Laser Ablation Inductively Coupled Mass Spectrometers (LA ICPMS) were used to examine scheelite textures and trace element concentrations in the Chuankou deposits. Scheelite in quartz-scheelite veins was formed over three generations. In situ LA-ICPMS trace elemental analyses of scheelite I show light rare earth element (LREE)-rich REE patterns and negative Eu anomalies, suggesting a relatively close fluid system. Significantly positive Eu anomalies of scheelite II and III indicate variable degrees of addition of meteoric water during scheelite precipitation. Therefore, ore-forming fluids of the Chuankou deposit were dominantly magma-derived, with different contributions of recycled meteoric water in the surrounding strata. Full article

The Sangdong W (tungsten)-deposit is known as one of the world’s largest W-deposits, a magmatic–hydrothermal ore deposit including both skarn and hydrothermal alteration zones. The strata-bound characteristic of the deposit resulted in three major orebodies (hanging wall, main, footwall). The main ore mineral is a scheelite (CaWO₄)–powellite (CaMoO₄) solid solution. We examined the fluid evolution and scheelite formation process of the quartz–scheelite veins of the ore deposit, based on the microtextures and geochemical characteristics of the scheelite. After the initial magmatic–hydrothermal fluid release from the granitic body, prograde skarn is formed. In the later prograde stage, secondary fluid rises and precipitates stage I scheelite. Well-developed oscillatory zoning with the highest Mo content indicates continuous fluid infiltration under an open system. Pressure rises as mineralization occurs, generating the pressure release of the retrograde fluid. Fluid migrates downward by the gravitational backflow mechanism, forming stage II to IV scheelites. Dented oscillatory zoning of stage II scheelite is strong evidence of this pressure release. Stage III and IV scheelite do not show specific internal structures with pure scheelite composition. Retrograde scheelites are formed by fractional crystallization under a closed system. The observation of systematical fractional crystallization in the quartz–scheelite vein system is a meaningful result of our research. The geochemical characteristics and microtextural evidence imprinted in scheelites from each stage provide crucial evidence for the understanding of sequential scheelite mineralization of the quartz–scheelite vein system of the Sangdong W-deposit. Full article