Search Results (133)

When a semiconducting sample is illuminated by an intensity-modulated monochromatic light beam with photon energy exceeding the band gap, part of the absorbed energy is directly converted into heat through photon–lattice interactions. This gives rise to a heat source that closely follows the temporal profile of the optical excitation, known as the fast heat source. Simultaneously, another portion of the absorbed energy is used to generate electron-hole pairs. These charge carriers diffuse together and recombine via electron–electron and electron–hole interactions, transferring their kinetic energy to the lattice and producing additional heating of the sample. This indirect heating mechanism, associated with carrier recombination, is referred to as the slow heat source. In this study, we develop a model describing surface temperature variations on the non-illuminated side of a thermally thin semiconductor exposed to a rectangular optical pulse, explicitly accounting for the contribution of surface charge carrier recombinations. Using this model, we investigate the influence of surface recombination velocity and the material’s plasma properties on the time-domain temperature response for both plasma-opaque and plasma-transparent samples. Our results demonstrate that charge carrier recombinations can significantly affect the transient photoacoustic signal recorded using a minimum volume cell, highlighting the potential of time-resolved photoacoustic techniques for probing the electronic properties of semiconductors. Full article

Photoacoustic spectroscopy (PAS) has become a valuable technique for trace gas detection due to its high sensitivity and potential for miniaturization. This study presents the development and evaluation of a near-infrared PAS system using a 1532 nm semiconductor laser and a multipass cell (MPC) designed to enhance the optical path and thereby improve the detection of ammonia (NH₃). The minimum detection limit was determined to be 770 ppb, with a normalized noise equivalent absorption (NNEA) coefficient of 1.07 × 10⁻⁸ W cm⁻¹ Hz⁻¹/². While competitive with similar PAS systems, these results indicate that mid-infrared technologies still offer superior detection thresholds. The findings suggest that while this near-infrared setup may not yet match the sensitivity of systems using quantum cascade lasers or QEPAS, it offers notable advantages in terms of simplicity, cost, and potential for field deployment. The system’s configuration makes it a viable and efficient tool for industrial gas monitoring and real-time environmental applications, with future improvements likely to come from transitioning to the mid-infrared region and advancing laser stabilization and miniaturization techniques. Full article

Photoacoustic (PA) imaging (PAI) holds great promise for non-invasive biomedical diagnostics. However, the efficacy of current contrast agents is often limited by photobleaching, toxicity, and complex synthesis processes. In this study, we introduce a novel, biocompatible PAI contrast agent: a recombinant water-soluble chlorophyll-binding protein (WSCP) from Lepidium virginicum (LvP) reconstituted with chlorophyll a (LvP-chla). LvP-chla exhibits a strong and narrow absorption peak at 665 nm, with a molar extinction coefficient substantially higher than oxyhemoglobin and deoxyhemoglobin, enabling robust signal generation orthogonal to endogenous chromophores. Phantom studies confirmed a linear relationship between PA signal amplitude and LvP-chla concentration, demonstrating its stability and reliability. In vitro cytotoxicity testing using 4T1 cells showed high cell viability at 5 mg/mL, justifying its use for in vivo studies. In vivo experiments with a 4T1 tumor-bearing mouse model demonstrated successful tumor localization following intratumoral injection of LvP-chla, with clear visualization via spectroscopic differentiation from endogenous absorbers at 665 nm and 685 nm. Toxicity assessments, both in vitro and in vivo, revealed no adverse effects, and clearance studies confirmed minimal retention after 96 h. These findings show that LvP-chla is a promising contrast agent that enhances PAI capabilities through its straightforward synthesis, stability, and biocompatibility. Full article

The photoacoustic (PA) method is commonly used in the measurement of trace gas concentration owing to its high accuracy and reliability. However, the conventional PA method is usually used in the gas-phase environment, which leads to a long measurement time and a large equipment volume for the degassing process. In this paper, we report a scheme to measure the acetylene (C₂H₂) concentration from the acetylene–dielectric oil (C₂H₂–Oil) mixed solution without the degassing process. The frequency and intensity distribution of the PA signal in the C₂H₂–Oil mixed liquid is investigated using the finite element method (FEM). Simulation results reveal that the incident light modulation frequency and the geometry size of the PA cell are two core factors to determine the PA signal. Furthermore, a PA sensor system is constructed to measure the concentration of C₂H₂ from the C₂H₂–Oil mixed solution. The measurement results demonstrate that the intensity of the PA signal in the C₂H₂–Oil mixed solution rises mostly linearly with the concentration of C₂H₂ from 0 to 100 mL/L. The Allan variance results from the continuous tests indicate that the measurement limit of the PA sensor system is about 0.2 mL/L. This work points to a novel method for the measurement of the C₂H₂ concentration from the C₂H₂–Oil mixed solution. Full article

Early-onset heart failure is a major treat to healthy aging individuals with HIV-1 infection. Women with HIV-1 infection (WLWH) are especially vulnerable and develop heart failure with preserved ejection fraction (HFpEF), of which left ventricular diastolic dysfunction, vascular deficits, myocardial infarction, and fibrosis are major components. HIV-infected rodent models that exhibit these pathophysiological features remain under-reported, and this has left a void in our understanding of their molecular causes and therapeutic strategies to blunt its development. Here, we show that female NOD.Cg-Prkdc^scidIl2rgt^m1Wjl/SzJ humanized mice (Hu-mice) infected with HIV-1_ADA and treated for 13 weeks with dolutegravir (DTG)/tenofovir disoproxil fumarate (TDF)/emtricitabine (FTC) develop progressive diastolic dysfunction with preserved ejection fraction (E:A ratio, E:e′, IVRT, left atrial volume and global longitudinal strain increased by 32.1 ± 5.1%, 28.2 ± 5.6%, 100.2 ± 12.6%, 26.6 ± 4.2% and 32.5 ± 4.3%, respectively). In vivo photoacoustic imaging revealed a 30.4 ± 6.8% reduction in saturated oxygenated hemoglobin in the anterior wall of the heart. The ex vivo analysis of hearts showed a reduction in density of perfused microvessels/ischemia (30.6 ± 6.2%) with fibrosis (20.2 ± 1.2%). The HIF-1α level was increased 2.6 ± 0.5-fold, while inflammation-induced serum semicarbazide amine oxidase and glycolysis byproduct methylglyoxal increased 2-fold and 2.1-fold, respectively. Treating H9C2 cardiac myocytes with DTG, FTC and TDF dose-dependently increased expression of HIF-1α. These data show that HIV-infected Hu-mice treated with DTG/TDF/FTC for thirteen weeks develop cardiac diastolic dysfunction, with vascular deficits, ischemia, and fibrosis like those reported in women living with HIV-1 infection (WLWH). They also show that DTG, TDF, and FTC treatment can increase total HIF-1α in H9C2 cells. Full article

Noninvasive blood glucose monitoring is crucial for diabetes management, and photoacoustic spectroscopy (PAS) offers a promising solution by detecting glucose levels through human skin. However, weak acoustic signals in PAS systems require optimized resonator designs for enhanced detection sensitivity. Designing such resonators physically is complex, requiring the precise identification of critical parameters before practical implementation. This study focused on optimizing a T-shaped photoacoustic resonator using finite element modeling in a COMSOL Multiphysics environment. By systematically varying the geometric design parameters of the T-cell resonator, a maximum increase in the pressure amplitude of 12.76 times with a quality factor (Q-factor) of 47.5 was achieved compared to the previously designed reference acoustic resonator. This study took a significant step forward by identifying key geometric parameters that influence resonator performance, paving the way for more sensitive and reliable noninvasive glucose monitoring systems. Full article

Marble waste is produced on a large scale in many countries, resulting in serious pollution problems. This investigation aimed to study the valorization potential of marble waste from the ornamental rock industry used in the synthesis of a novel calcium niobate–magnesium niobate composite powder prepared by a solid-state reaction between 1000 °C and 1200 °C. The chemical and mineralogical characteristics of the marble waste were determined. Structural and morphological characterizations of the synthesized calcium niobate–magnesium niobate composite powders were conducted by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The thermophysical properties were measured using open photoacoustic cell and photothermal techniques. Structurally, at all synthesis temperatures, the calcium niobate–magnesium niobate powders were found to be composed of a complex mixture of CaNb₂O₆/Ca₂Nb₂O₇/MgNb₂O₆/CaMg_0.33Nb_0.67O₃. In addition, the calcium niobate–magnesium niobate composite powders exhibited low values of thermal diffusivity (1.88–2.15 × 10⁻⁷ m²/s) and thermal conductivity (0.12–0.16 W/mK). The findings of this investigation highlight the potential of marble waste as a promising sustainable source of carbonate for obtaining calcium niobate–magnesium niobate composite powder, which has thermophysical properties that should be explored in low-thermal-conductivity applications. Full article

Photodynamic and photothermal therapies with IR780 have gained exponential interest, and their photophysical properties have demonstrated promise for use in antitumor and antimicrobial chemotherapy. IR780 and its derivatives are valuable in labeling nanostructures with different chemical compositions for in vitro and in vivo fluorescence monitoring studies in the near-infrared (NIR) spectrum. The current literature is abundant on this topic, particularly with applications in the treatment of different types of cancer using laser illumination to produce photodynamic (PDT), photothermal (PTT), and, more recently, sonodynamic therapy (SDT) approaches for cell death. This review aims to update the state of the art concerning IR780 photosensitizer as a theranostic agent for PDT, PTT, SDT, and photoacoustic (PA) effects, and fluorescence imaging monitoring associated with different types of nanocarriers. The literature update concerns a period from 2017 to 2024, considering, more specifically, the in vivo effects found in preclinical experiments. Some aspects of the labeling stability of nanostructured systems will be discussed based on the evidence of IR780 leakage from the nanocarrier and its consequences for the reliable analysis of biological data. Full article

Conventional cancer treatments often have complications and serious side effects, with limited improvements in 5-year survival and quality of life. Photothermal therapy (PTT) employs materials that convert light to heat when exposed to near-infrared light to raise the temperature of the tumor site to directly ablate tumor cells, induce immunogenic cell death, and improve the tumor microenvironment. This therapy has several benefits, including minimal invasiveness, high efficacy, reduced side effects, and robust targeting capabilities. Beyond just photothermal conversion materials, nanoplatforms significantly contribute to PTT by supplying effective photothermal conversion materials and bolstering tumor targeting to amplify anti-tumor effects. However, the anti-tumor effects of PTT alone are ultimately limited and often need to be combined with other therapies. This narrative review describes the recent progress of PTT combined with chemotherapy, radiotherapy, photodynamic therapy, immunotherapy, gene therapy, gas therapy, chemodynamic therapy, photoacoustic imaging, starvation therapy, and multimodal therapy. Studies have shown that combining PTT with other treatments can improve efficacy, reduce side effects, and overcome drug resistance. Despite the encouraging results, challenges such as optimizing treatment protocols, addressing tumor heterogeneity, and overcoming biological barriers remain. This paper highlights the potential for personalized, multimodal approaches to improve cancer treatment outcomes. Full article

Senescence is an intricate physiological progression that can be instigated by a multiplicity of factors. Aberrant cellular senescence is capable of precipitating a substantial array of diseases. During chemotherapy, drugs typically tend to gradually accumulate in the liver, thereby inducing liver senescence and leading to a successive deterioration in its physiological function. β-galactosidase (β-gal), serving as a significant index in the exploration of senescence, has attracted considerable attention. In this study, a fluorescence/photoacoustic (FL/PA) biomodal probe (Gal-QCS) was developed based on a hemicyanine fluorophore for the imaging of β-gal in the process of drug-induced liver senescence. Gal-QCS demonstrates rapid responsiveness, high sensitivity, and remarkable selectivity in detecting β-gal in aqueous solutions. After incubation with β-gal, the fluorescence signal at 810 nm significantly increases, and concurrently, the photoacoustic signal at 775 nm also exhibits a substantial increment. Upon the induction of cell senescence with camptothecin, Gal-QCS can expeditiously and selectively image senescent cells. Moreover, after administering this probe to mice with liver senescence, the FL/PA signals in the livers of senescent mice were enhanced by 10.53-fold and 1.43-fold, respectively. This work robustly substantiates the potential and application prospects of Gal-QCS in detecting drug-induced liver senescence, with β-gal serving as a biomarker. Full article

Reactive oxygen species (ROS) are generated predominantly during cellular respiration and play a significant role in signaling within the cell and between cells. However, excessive accumulation of ROS can lead to cellular dysfunction, disease progression, and apoptosis that can lead to organ dysfunction. To overcome the short half-life of ROS and the relatively small amount produced, various imaging methods have been developed, using both endogenous and exogenous means to monitor ROS in disease settings. In this review, we discuss the molecular mechanisms underlying ROS production and explore the methods and materials that could be used to detect ROS overproduction, including iron-based materials, ROS-responsive chemical bond containing polymers, and ROS-responsive molecule containing biomaterials. We also discuss various imaging and imaging techniques that could be used to target and detect ROS overproduction. We discuss the ROS imaging potentials of established clinical imaging methods, such as magnetic resonance imaging (MRI), sonographic imaging, and fluorescence imaging. ROS imaging potentials of other imaging methods, such as photoacoustic imaging (PAI) and Raman imaging (RI) that are currently in preclinical stage are also discussed. Finally, this paper focuses on various diseases that are associated with ROS overproduction, and the current and the future clinical applications of ROS-targeted imaging. While the most widely used clinical condition is cardiovascular diseases, its potential extends into non-cardiovascular clinical conditions, such as neurovascular, neurodegenerative, and other ROS-associated conditions, such as cancers, skin aging, acute kidney injury, and inflammatory arthritis. Full article

A highly sensitive sulfur dioxide (SO₂) photoacoustic gas sensor was developed for the sulfur hexafluoride (SF₆) decomposition detection in electric power systems by using a novel 266 nm low-cost high-power solid-state pulse laser and a high Q-factor differential photoacoustic cell. The ultraviolet (UV) pulse laser is based on a passive Q-switching technology with a high output power of 28 mW. The photoacoustic signal was normalized to the laser power to solve the fluctuation of the photoacoustic signal due to the power instability of the UV laser. A differential photoacoustic cell can obtain a high Q-factor and reduce the gas flow noise in SF₆ buffer gas. The parameters of the SO₂ sensor system were optimized in terms of laser power and operating pressure. A 1σ detection limit (SNR = 1) of 2.34 ppb was achieved with a 1 s integration time, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 7.62 × 10⁻¹⁰ cm⁻¹WHz^−1/2. Full article

Based on photoacoustic spectroscopy and finite element simulation technology, a simulation model of sound field excitation in a cylindrical resonant photoacoustic cell was established. The finite element simulation method was used to analyze the acoustic mode and sound pressure distribution of the cavity structure of the photoacoustic cell. The effects of the geometric parameters of the resonator and the buffer cavity on the performance of the photoacoustic cell were compared. The frequency response characteristics of the photoacoustic cell and the effects of the air intake and the air outlet were studied. Based on the simulation results, a cylindrical resonant photoacoustic cell was designed, and a photoacoustic sensor for NO₂ detection was built. NO₂ with a volume fraction of 10⁻⁵ was taken as the sample gas through frequency scanning to obtain the frequency response curve of the system. The resonant frequency is 1730 Hz, and the cell constant is about 542.3 (Pa*cm)/W. The quality factor is 10.05. By linear fitting the calibration curve of the sensor, the fitting slope is 0.012 µV/ppb, and R² is 0.998. Atmospheric NO₂ detection was carried out for two consecutive weeks, whose findings are in good agreement with the data released by a Huainan environmental monitoring site. The experimental results show that the system can detect NO₂ in the atmosphere with high sensitivity. Full article

In this study, we address the challenge of estimating the resonance frequency of a photoacoustic detector (PAD) gas cell under varying temperature conditions, which is crucial for improving the accuracy of gas concentration measurements. We introduce a novel approach that uses a long short-term memory network and a self-attention mechanism to model resonance frequency shifts based on temperature data. To investigate the impact of the gas mixture temperature on the resonance frequency, we modified the PAD to include an internal temperature sensor. Our experiments involved multiple heating and cooling cycles with varying methane concentrations, resulting in a comprehensive dataset of temperature and resonance frequency measurements. The proposed models were trained and validated on this dataset, and the results demonstrate real-time prediction capabilities with a mean absolute error of less than 1 Hz for frequency shifts exceeding 30 Hz over four-hour periods. This approach allows continuous, real-time tracking of the resonance frequency without interrupting the laser operation, significantly enhancing gas concentration measurements and contributing to the long-term stabilization of the sensor. The results suggest that the proposed approach is effective in managing temperature-induced frequency shifts, making it a valuable tool for improving the accuracy and stability of gas sensors in practical applications. Full article

Diabetes mellitus is a prevalent disease with a rapidly increasing incidence projected worldwide, affecting both industrialized and developing regions. Effective diabetes management requires precise therapeutic strategies, primarily through self-monitoring of blood glucose levels to achieve tight glycemic control, thereby mitigating the risk of severe complications. In recent years, there have been significant advancements in non-invasive techniques for measuring blood glucose using photoacoustic spectroscopy (PAS), as it shows great promise for the detection of glucose using the infrared region (e.g., MIR and NIR) of light. A critical aspect of this method is the detection of the photoacoustic signal generated from blood glucose, which needs to be amplified through a photoacoustic resonator (PAR). In this work, an overview of various types of PARs used for non-invasive glucose sensing is reviewed, highlighting their operating principle, design requirements, limitations, and potential improvements needed to enhance the analysis of photoacoustic signals. The motivation behind this review is to identify and discuss main parameters crucial to the efficient design of PARs used in non-invasive glucose detection, which will be helpful for furthering the basic understanding of this technology and achieving the highly sensitive PAR required for non-invasive glucose monitoring. Full article