Search Results (7)

Background: Managing unilateral maxillary lateral incisor agenesis (UMLIA) with an associated microdontic or peg-shaped contralateral incisor (Mi or Peg MLI) presents clinical and esthetic challenges. Deciding between orthodontic space opening (OSO) or closure (OSC) and whether to restore or extract the Mi or Peg MLI are critical factors for achieving optimal treatment outcomes. Methods: A systematic review was conducted using a dual strategy across Scopus, Web of Science, Embase, PubMed, and Cochrane Central Register of Controlled Trials databases. The Cochrane RoB2 tool was used for randomized controlled trials (RCTs), the ACROBAT-NRSI tool for non-randomized studies, and the JBI Manual for case reports. High-quality case reports were included when the literature was limited. The GRADE (Grading of Recommendations, Assessment, Development, and Evaluation) tool evaluated the certainty of evidence, considering bias, inconsistency, indirectness, imprecision and other considerations. Results: Thirty-five studies met the inclusion criteria, assessing treatment modalities, esthetic outcomes, periodontal health, and occlusal and temporomandibular joint (TMJ) function. Both OSO and OSC demonstrated similar occlusal and TMJ outcomes, while slight differences in esthetic and periodontal results were noted between the two approaches. Direct composite and indirect ceramic restorations showed comparable effectiveness for reshaping the Mi or Peg MLI. Extraction combined with OSC contributed to improved smile symmetry. Conclusions: A personalized, multidisciplinary approach is essential for treating UMLIA with an Mi or Peg MLI. Both OSO and OSC are viable options, and the choice should be tailored to the patient’s specific clinical scenario, with attention to achieving the best esthetic and periodontal outcomes. Further research is needed to refine treatment protocols and support clinical decision-making. Full article

Introduction: Dental anomalies present a significant challenge to clinicians due to their impact on both dental function and esthetics. The correction of these anomalies plays a critical role in improving the quality of life of our patients, highlighting the importance of this restorative work. Objective: The purpose of this systematic review is to assess the techniques used to restore various dental anomalies, and their subsequent esthetic impact on the overall dentition. Methods: Inclusion criteria consisted of restorative rehabilitations of the permanent dentition in non-syndromic patients with dental anomalies of morphology, structure, size, and number in the maxillary incisors. Exclusion criteria included surgical rehabilitation techniques, endodontic treatments, and anomalies of the primary dentition. The medical literature was systematically searched (Pubmed, PMC, Embase, Cochrane Central Register of Controlled Clinical trials, Scopus and Google Scholar) to identify all relevant articles reporting data regarding the chosen anomalies. ROBINS–I was used to assess the risk of bias tool, and the results were tabulate due to data heterogeneity. Results: Of the 1821 analyzed articles, 46 articles met the inclusion criteria, and were chosen to go through the final review procedure. Of the selected articles, 3 investigated amelogenesis imperfecta and dentinogenesis imperfecta, 1 analyzed conoid teeth, 1 considered hypodontia (other than MLIA), 3 concerned microdontia (excluding peg laterals and conoid teeth), 10 evaluated peg-shaped laterals, 2 investigated talon cusps and geminated teeth, 15 were regarding maxillary lateral incisor agenesis, and 11 papers were related to the perception of anomalies. Conclusions: Pre-visualization using Digital Smile Design, a treatment plan encompassing minimally invasive restorations, and using a multidisciplinary approach among practitioners helps the anomalous patient achieve the best possible esthetic result. Full article

To assess the presence and possible associations between the type of dental anomalies and maxillary and mandibular canine impactions in orthodontic patients treated for canine impaction, panoramic radiographs of orthodontic patients treated for canine impaction were assessed for the presence of associated dental anomalies. A random sample of orthodontic patients without canine impaction matched for age and gender served as controls. Descriptive and exact inferential statistics were implemented in order to assess potential associations between canine impaction and dental anomalies. A total of 102 orthodontic patients with 70 maxillary (MaxCI) and 32 mandibular (ManCI) canine impactions were assessed. The control group included 117 orthodontic patients. Dental anomalies were present in more than 50% of patients with impacted canines and in 20% of the controls. Tooth agenesis was significantly more common in the MaxCI group when compared to the ManCI group, while supernumerary teeth and canine transmigration were registered more often in the ManCI group. When compared to the control group, peg-shaped maxillary lateral incisors and tooth agenesis were significantly more prevalent in the MaxCI group, while canine transmigration, supernumerary teeth, the agenesis of mandibular incisors and tooth transpositions were significantly more prevalent in the ManCI group. The impaction of other teeth was significantly more common in both canine impaction groups when compared to the controls. The prevalence of dental anomalies in orthodontic patients with impacted canines was higher than in orthodontic patients without canine impaction. Different types of tooth anomalies were found in the MaxCI and ManCI groups. Full article

(1) Background: Tooth agenesis is one of the most common developmental dental anomalies often affecting the maxillary incisors area and premolar regions. (2) Purpose: The aim of this study was to assess the prevalence and distribution of permanent tooth agenesis and the associated dental abnormalities among orthodontically treated children. (3) Materials and Methods: This study was carried out utilizing 3000 pretreatment records of children who underwent orthodontic treatment, 1780 (59%) females and 1220 (41%) males, aged 10–25 years (mean age 15 years). Tooth agenesis and other dental anomalies were surveyed using their panoramic radiographs, according to gender, pattern, and location. The level of statistical significance was set at p < 0.05 using t-test or Chi-Square tests. (4) Results: The total number of missing teeth, excluding third molars, was 518 (17%) found in 326 (11%) children. The majority were the maxillary lateral incisors, which was 176 teeth (34%) (p < 0.05). Of them, 111 (63%) were in females, and 65 (37%) were in males. The second most common missing tooth was mandibular second premolars, which was 137 teeth (26%), followed by missing 73 (14%) maxillary second premolars. Impacted teeth had the highest associated dental anomaly prevalence (14.3%), while transposition showed the lowest anomaly prevalence (0.5%). (5) Conclusions: A prevalence of 11% for tooth agenesis was detected in this study. More teeth were missing in the maxilla compare with the mandible. A significant association was found between missing maxillary lateral incisors and missing premolars (p < 0.05). Associated dental anomalies included an increased number of peg-shaped maxillary lateral incisors, palatally displaced and impacted maxillary canines, ectopic teeth, and infra-occluded (submerged) primary second molars. Full article

The aim of this study was to determine the frequency of different crown shapes and associated dental anomalies of the permanent maxillary lateral incisor (PMLI) and their impact on aesthetics and occlusion (function) in orthodontically treated patients. Materials and Methods: The records of 372 subjects, which consisting of study casts, panoramic radiographs and anamnestic data, were investigated for crown shape and associated dental anomalies of PMLI and potential dental treatment to achieve satisfactory aesthetics and function. Descriptive statistics, including means, standard deviations and percentages for the observed variables, were calculated. Data were analyzed using the chi-square test. p-Values < 0.05 were considered as statistically significant. Results: The results showed that the most common crown shapes of PMLI were trapezoidal-shaped (59.8%), followed by central incisor-shaped (26.7%), canine-shaped (11.2%) and peg-shaped (2.3%), without statistically significant difference between genders. Developmental anomalies were found in 86 (11.6%) PMLI. All subjects with developmental anomalies were included in orthodontic treatment, and 91.2% of them need interdisciplinary treatment to achieve satisfactory aesthetics and function. Conclusions: The morphological diversity and developmental anomalies of the PMLI may affect aesthetics and function and should be considered in treatment planning. Full article

Mouthparts are the crucial sensory and feeding organs associated with food detection and feeding in insects. The Asian ricaniid planthopper Ricania speculum (Walker), recently introduced into Europe, can cause severe economic damage by sucking the phloem sap of tea, camphor, citrus, black locust and other plants using piercing-sucking mouthparts. To facilitate comprehensive understanding of feeding mechanisms in the Ricaniidae, the fine structure of the mouthparts of Ricania speculum was observed by scanning electron microscopy for the first time. The mouthparts are tubular, consist of a cone-shaped labrum, with a wrinkled epidermis and without sensilla; the tubular labium is divided into three segments: a slender stylet fascicle consisting of two mandibular stylets with four ridged processes and a row of longitudinal striations on the distal part of the outer surface; and two maxillary stylets with a smooth and sharp distal part, interlocked to form a larger food canal and a smaller salivary canal. On the labium, 15 kinds of sensilla of different functions were recognized. Two rows of short sensilla basiconica (SB I) are symmetrically distributed along the labial groove on the first segment. Two pairs of long sensilla basiconica (SB II) (proprioceptors) are on both sides of the labial groove at the junction of the second and third segments. A placoid, flattened sensillum (SPF) is symmetrically located laterally on the proximal end of the last segment and several flattened sensilla campaniformia (SFC) were visible on the ventral side on the second and third segments. The distribution of four types (I–IV) of sensilla cheatica of different lengths on the dorsal surface of the labium is significantly denser than on the lateral and ventral surfaces. The labial apex is divided into dorsal and ventral sensory fields, mainly including uniporous long peg sensilla (I), as well as smaller peg sensilla (II) and nonporous peg sensilla (PGSN) on each dorsal field. These nonporous sensilla basiconica (BSN I and III) occur on the ventral sensory fields and are constant in number and distribution. The nonporous sensilla basiconica (BSN II) are symmetrically arranged near the opening of the stylet fascicle similarly to two oval multiporous plate sensilla (OPSM). The sensilla arrangement is slightly different from that observed in previously studied Fulgoromorpha using scanning electron micrographs, which may reflect differences in feeding preference or behavior. Full article

Folic acid-conjugated nanophotosensitizers composed of folic acid (FA), poly(ethylene glycol) (PEG) and chlorin e6 (Ce6) tetramer were synthesized using diselenide linkages for reactive oxygen species (ROS)- and folate receptor-specific delivery of photosensitizers. Ce6 was conjugated with 3-[3-(2-carboxyethoxy)-2,2-bis(2-carboxyethoxymethyl)propoxy]propanoic acid (tetra acid, or TA) to make Ce6 tetramer via selenocystamine linkages (TA-sese-Ce6 conjugates). In the carboxylic acid end group of the TA-sese-Ce6 conjugates, FA-PEG was attached again using selenocystamine linkages to make FA-PEG/TA-sese-Ce6 conjugates (abbreviated as FAPEGtaCe6 conjugates). Nanophotosensitizers were fabricated by a dialysis procedure. In the morphological observations, they showed spherical shapes with small diameters of less than 200 nm. Stability of the aqueous FAPEGtaCe6 nanophotosensitizer solution was maintained (i.e., their particle sizes were not significantly changed until 7 days later). When H₂O₂ was added to the nanophotosensitizer solution, the particle size distribution was changed from a monomodal pattern to a multimodal pattern. In addition, the fluorescence intensity and Ce6 release rate from the nanophotosensitizers were also increased by the addition of H₂O₂. These results indicated that the nanophotosensitizers had ROS-sensitive properties. In an in vitro cell culture study, an FAPEGtaCe6 nanophotosensitizer treatment against cancer cells increased the Ce6 uptake ratio, ROS generation and light-irradiated cytotoxicity (phototoxicity) compared with Ce6 alone against various cancer cells. When the folic acid was pretreated to block the folate receptors of the Y79 cells and KB cells (folate receptor-overexpressing cells), the intracellular Ce6 uptake, ROS generation and thereby phototoxicity were decreased, while the MCF-7 cells did not significantly respond to blocking of the folate receptors. These results indicated that they could be delivered by a folate receptor-mediated pathway. Furthermore, an in vivo pulmonary metastasis model using Y79 cells showed folate receptor-specific delivery of FAPEGtaCe6 nanophotosensitizers. When folic acid was pre-administered, the fluorescence intensity of the lungs was significantly decreased, indicating that the FAPEGtaCe6 nanophotosensitizers had folate receptor specificity in vitro and in vivo. We suggest that FAPEGtaCe6 nanophotosensitizers are promising candidates for a targeted photodynamic therapy (PDT) approach against cancer cells. Full article