Search Results (10)

Introducing new forage crops such as Japanese millet (Echinochloa frumentacea) and pearl millet (Pennisetum glaucum) is crucial for mitigating the impacts of climate change in the dry steppe zone, expanding forage crop options, and obtaining nutritious feed for the development of animal husbandry. The aim of this study was to assess the productivity and feed value of these crops. Field experiments were conducted in 2021 and 2022 to investigate the changes and variations in the yields and chemical compositions of Japanese millet and pearl millet when grown as sole crops or in mixed cropping in the dry steppe zone of northern Kazakhstan. Among the annual crops sown via sole cropping, the hay of the Japanese millet, sown in the third decade of May and harvested during full heading, was observed to have a higher content of raw protein and other nutrients than Sudanese grass hay, that is, the raw protein content was higher at 1.81%, the raw oil content at 0.12, and the raw ash content at 1.88%. In addition, among the mixtures of crops, the hay of the crop mixtures containing pearl millet, sown in the above period and harvested as hay during the milky stage, the full heading stage, and the formation of spikelets in the grain family stage, differed from the hay of Sudanese grass sown in the same period and collected during full heading in terms of the contents of raw protein and other nutrients and the low content of raw ash, that is, the content of raw protein was at 2.16%, raw oil at 0.39, raw ash at 0.95, without nitrogen extractives (WNEs) at 3.78, and starch at 0.11. The calcium content was higher by 0.08% and carotene by 0.11 mg/kg, and raw lentils were lower by 0.94%. The analysis of the results revealed that the variation in the crops’ phenological phases depended on the moisture availability and the sowing time. Full article

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: Saccharomyces boulardii (FPM1), Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius (FPM2) and Hanseniaspora uvarum plus Fructilactobacillus sanfranciscensis (FPM3). All the fermentation processes led to an increase in minerals. An increase was observed for calcium: 254 ppm in FPM1, 282 ppm in FPM2 and 156 ppm in the unfermented sample. Iron increased in FPM2 and FPM3 (approx. 100 ppm) with respect the unfermented sample (71 ppm). FPM2 and FPM3 resulted in richer total phenols (up to 2.74 mg/g) compared to the unfermented sample (2.24 mg/g). Depending on the microorganisms, it was possible to obtain different oligopeptides with a mass cut off ≤10 kDalton that was not detected in the unfermented sample. FPM2 showed the highest resistant starch content (9.83 g/100 g) and a prebiotic activity on Bifidobacterium breve B632, showing a significant growth at 48 h and 72 h compared to glucose (p < 0.05). Millet fermented with Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius can be proposed as a new food with improved nutritional properties to increase the quality of the diet of people who already use millet as a staple food. Full article

Genotype × environment interactions (GEIs) should play an important role in the selection of suitable germplasm in breeding programmes. We here assessed GEI effects on pearl millet (Pennisetum glaucum L.) genotypes, selected to possess a high concentration of slowly digestible starch (SDS) and resistant starch (RS) in their grains. Entries were grown in a randomized complete block design with three replications at locations in Bawku-Ghana, Sadore-Niger, Bamako-Mali, Konni-Nigeria, and Gampella-Burkina Faso across West Africa. Harvested grains from these locations were metabolomically profiled using flow injection ionization-high-resolution mass spectrometry (FIE-HRMS). A total of 3144 mass features (m/z) (1560 negative ion mode and 1584 positive ion mode) were detected, of which, 475 m/z were linked to metabolites be involved in starch, antioxidant and lipid biosynthesis, and vitamin metabolism. Combined ANOVA revealed that the GEI was significantly evident for 54 health-benefiting metabolites, many associated with sugar, especially galactose, metabolism. Additive main effects and multiplicative interaction (AMMI) analysis examined genotype variation and GEI effects, which, when combined with principal component analysis (PCA), found that m/z 171.14864 (positive ionisation, propenyl heptanoate) accounted for 89% of the GEI variation along PC1. The AMMI-based stability parameter (ASTAB), modified AMMI stability value (MASV), and modified AMMI stability index (MASI) were then applied to identify stable and high-performing genotypes for all the health-benefiting metabolites. Similarly, the best-linear-unbiased-prediction (BLUP)-based stability estimation was also performed using the harmonic mean of genotypic values (HMGV), relative performance of genotypic values (RPGV), and harmonic mean of relative performance of genotypic values (HMRPGV), to identify genotype rankings across multiple environments. The multi-trait stability index (MTSI) was calculated and found that the genotypes G1 (ICMH-177111) and G24 (ICMX-207137) were the most stable and were the best mean performers across 52 health-benefiting metabolic traits. These findings demonstrate the potential of G × E assessments on the delivery of health-benefiting metabolite-rich grains in future varieties and hybrids of pearl millet. Full article

Pearl millet starches were modified at pH 8.0 using 3.0% octenyl succinic anhydride (OSA), and their pasting, rheological properties, and in vitro digestibility were analyzed. The degree of substitution (D.C.) of OSA-modified starches varied from 0.010 to 0.025. The amylose content decreased after modification, while the reverse was observed for swelling power. After OSA modification, the pasting viscosities (peak, trough, setback (cP)) of the modified starches increased compared to their native counterparts. G′ (storage modulus) and G″ (loss modulus) decreased significantly (p < 0.05) compared to their native counterparts during heating. Yield stress (σo), consistency (K), and flow behavior index (n) varied from 9.8 to 87.2 Pa, 30.4 to 91.0 Pa.s., and 0.25 to 0.47, respectively. For starch pastes, steady shear properties showed n < 1, indicating shear-thinning and pseudoplastic behavior. The readily digestible starch (RDS) and slowly digestible starch (SDS) contents decreased, while the resistant starch (R.S.) content increased. After OSA treatment, the solubility power of the starches increased; this property of OSA starches speeds up the biodegradability process for the films, and it helps to maintain a healthy environment. Full article

In this study, cross-linked pearl millet starch and fenugreek oil was used to develop active starch edible films to overcome the limitations of native starch and to substitute artificial preservatives with natural one. The starch was cross-linked at three levels (1%, 3% and 5%) using sodium trimetaphosphate (STMP), and physicochemical properties were studied. Moreover, a comparative study was conducted among four samples of films prepared using native starch, cross-linked starch, and native and cross-linked starch loaded with fenugreek oil for physical, thermal, mechanical, morphological, and antibacterial properties. The solubility, swelling, and amylose content of native and modified starch varied from 11.25–12.75%, 12.91–15.10 g/g, and 8.97–16.55%, respectively. The values of these parameters were reduced as the concentration of STMP increased. Cross-linked starch films showed lower moisture, solubility, water vapor permeability(WVP), and elongation at break (EB) values while having higher thickness, opacity, thermal, and tensile strength values. The microscopic images of cross-linked starch films showed smooth surfaces and the absence of ridges, pores, and cracks. The films loaded with fenugreek oil showed different results; the moisture content, water solubility, and tensile strength were decreased while thickness, opacity, WVP, and EB were increased. The onset temperature and peak temperature were lower, while enthalpy of gelatinization was increased to a greater extent than films without oil. The addition of fenugreek oil to films showed a good inhibition area of 40.22% for native+oil films and 41.53% for cross-linked+oil films % against Escherichia coli. This study confirmed the successful utilization of fenugreek oil as a very effective antimicrobial agent in preparing edible films. Full article

As efforts are made to increase food security, millets are gaining increasing importance due to their excellent nutritional credentials. Among the millets, pearl millet is the predominant species possessing several health benefiting nutritional traits in its grain that are helpful in mitigating chronic illnesses such as type−2 diabetes and obesity. In this paper, we conducted metabolomic fingerprinting of 197 pearl millet inbred lines drawn randomly from within the world collection of pearl millet germplasm and report the extent of genetic variation for health benefitting metabolites in these genotypes. Metabolites were extracted from seeds and assessed using flow infusion high-resolution mass spectrometry (FIE-HRMS). Metabolite features (m/z), whose levels significantly differed among the germplasm inbred lines, were identified by ANOVA corrected for FDR and subjected to functional pathway analysis. A number of health-benefiting metabolites linked to dietary starch, antioxidants, vitamins, and lipid metabolism-related compounds were identified. Metabolic genome-wide association analysis (mGWAS) performed using the 396 m/z as phenotypic traits and the 76 K SNP as genotypic variants identified a total of 897 SNPs associated with health benefiting nutritional metabolite at the -log p-value ≤ 4.0. From these associations, 738 probable candidate genes were predicted to have an important role in starch, antioxidants, vitamins, and lipid metabolism. The mGWAS analysis focused on genes involved in starch branching (α-amylase, β-amylase), vitamin-K reductase, UDP-glucuronosyl, and UDP-glucosyl transferase (UGTs), L-ascorbate oxidase, and isoflavone 2′-monooxygenase genes, which are known to be linked to increases in human health benefiting metabolites. We demonstrate how metabolomic, genomic, and statistical approaches can be utilized to pinpoint genetic variations and their functions linked to key nutritional properties in pearl millet, which in turn can be bred into millets and other cereals crops using plant breeding methods. Full article

Pearl millet starch was modified using epichlorohydrin (EPI) at different concentrations (0.1%; 0.3%; 0.5%; and 0.8%) and evaluated for physicochemical, rheological, in vitro digestibility, and film-forming characteristics. The degree of cross-linking was observed at higher levels (0.5% and 0.8%) of EPI. Upon cross-linking, breakdown and setback viscosity reduced whereas pasting temperature was increased. Storage modulus (G′) and loss modulus (G″) value of cross-linked (CL) starches ranged between 2877 to 5744 Pa and 168 to 237 Pa, respectively, during the frequency sweep test. A drastic decrease was observed for steady shear (yield stress and consistency index) characteristics of CL starches. Resistant starch (RS) content was increased after starch modification, which imparts its nutritional values and starch modified at 0.8% had the highest RS content. Modifications of starch at different levels had significant effects on the moisture, opacity, solubility and mechanical properties of films. Outcomes of this study will be helpful to understand the properties of native and CL starches for their potential applications in preparation of edible films. Full article

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92–76.16 °C, 67.95–81.05 °C, and 73.78–84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G′) and loss modulus (G′′)) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation. Full article

Effects of non-leguminous cover crops and their times of chopping on the yield and quality of no-till baby corn (Zea mays L.) were evaluated during two kharif seasons (May-August in 2014 and 2015) under subtropical climatic conditions of Punjab, India. The experiment was laid out in a split-plot design with four replications at Punjab Agricultural University’s Research Farm. Three cover crops (pearl millet (Pennisetum glaucum L.), fodder maize (Zea mays L.), and sorghum (Sorghum bicolor L.)) and the control (no cover crop) were in the main plots and chopping time treatments (25, 35, 45 days after planting (DAP)) in the subplots. During both kharif seasons, the yield (cob and fodder yield) and dry matter accumulation of baby corn following cover crop treatments, especially pearl millet, were significantly (p ≤ 0.05) higher than the control, and improved with increments in chopping time from 25 to 45 DAP. The effect of cover crops on baby corn quality (i.e., protein, starch, total soluble solids, crude fiber, total solid, and sugar content) did not differ among treatments, while increasing increments in chopping time had a significant effect on the protein and sugar content of baby corn. The use of cover crops and increment in chopping time helped in enhancing topsoil quality, especially available nitrogen; yet, the effect of cover crops and their times of chopping on topsoil organic carbon, phosphorus, and potassium did not differ among treatments. During both seasons, there was no significant interaction between cover crop and time of chopping among treatments with respect to baby corn yield and quality, as well as topsoil quality parameters. Full article

Our objective was to measure the proximate, starch, amino acid, and mineral compositions of grains, grain co-products, and other carbohydrate sources with potential use in pet foods. Thirty-two samples from barley (barley flake, cut barley, ground pearled barley, malted barley, whole pearled barley, pearled barley flakes, and steamed rolled barley); oats (groats, ground oatmeal, ground steamed groats, instant oats, oat bran, oat fiber, oat flour, quick oats, regular rolled oats, steamed rolled oat groats, and steel cut groats); rice (brown rice, polished rice, defatted rice bran, and rice flour); and miscellaneous carbohydrate sources (canary grass seed, hulled millet, whole millet, quinoa, organic spelt hull pellets, potato flake, sorghum, whole wheat, and whole yellow corn) were analyzed. Crude protein, amino acid, fat, dietary fiber, resistant starch, and mineral concentrations were highly variable among the respective fractions (i.e., barley flake vs. malted barley vs. steamed rolled barley) as well as among the various grains (i.e., barley flake vs. brown rice vs. canary grass seed). These ingredients not only provide a readily available energy source, but also a source of dietary fiber, resistant starch, essential amino acids, and macrominerals for pet diets. Full article