Search Results (82)

Ultrashort fiber lasers are one of the current research hotspots in the field of lasers. They have the advantages of compact structure and high beam quality. Passively mode-locking using saturable absorbers (SAs) is an important scheme for generating picosecond and femtosecond pulses. A deep understanding of the passive mode-locking mechanism is key to maturing ultrafast laser technology. In recent years, the passively mode-locking technology of SAs has been improved in material systems, device preparation, and cavity structures. SAs are primarily divided into artificial SAs and real SAs. Real SAs primarily include semiconductor saturable absorption mirrors (SEASAMs) and nanomaterials. Artificial SAs primarily include nonlinear optical loop mirrors (NOLMs), nonlinear multimode interference (NLMMI), nonlinear polarization rotation (NPR), and the Mamyshev oscillator. Herein, we mainly review passively mode-locked fiber lasers employing various SAs, as well as their working principles and technical characteristics. By focusing on the representative achievements, the developmental achievements of ultrafast lasers based on SAs are demonstrated. Finally, the prevailing challenges and promising future research directions in SA’s mode-locking technology are discussed. Full article

We demonstrate a compact astro-comb with ~30 GHz line spacing covering the 560–900 nm range, seeded by a 1 GHz Yb:fiber laser frequency comb phase-locked to a rubidium clock for long-term frequency stability. The comb spacing is multiplied by a passively stabilized Fabry–Pérot cavity, which is vacuum-sealed (3.3 × 10⁻⁵ Pa) and temperature-controlled at 25 ± 0.05 °C, exhibiting a resonance linewidth of 80.56 MHz. Characterization using a high-resolution Fourier-transform spectrometer reveals sharp, evenly spaced comb lines with a maximum side-mode suppression ratio of 23.86 dB. The estimated radial velocity (RV) precision reaches ~63 cm/s, and further reduction in measurement noise is expected to achieve <10 cm/s precision, meeting the stringent requirements of next-generation astronomical spectrographs. Full article

We experimentally and through simulations demonstrate a passively mode-locked fiber laser based on nonlinear polarization rotation, which generates the evolution from h-shaped pulses to GHz harmonic trains. When the polarization angle is continuously changed, the h-shaped pulse sequentially evolves into multiple pulses, bunched solitons, and harmonic pulses. The maximum order of harmonic trains obtained in experiments is 120, corresponding to the repetition frequency of 1.03996 GHz. The coupled Ginzburg-Landau equation and two-time-scale approach to gain is provided to characterize the laser physics. The fast and slow evolution of gain contributes to the stabilization and length of one soliton pattern, respectively. The proposed fiber laser is cost effective and easy to implement, providing a potential way to study soliton dynamics in depth. Full article

The combination of polypyrrole (PPy) with graphene has attracted extensive attention as a nonlinear optical material with various optoelectronic applications. Here, we describe the development of PPy nanoplates prepared using a simple spin-coating method. The appropriate volume of the dropped PPy solution was determined to be 50 drops by comparing the surface morphologies, chain structures, elementary compositions, and optical properties of PPy saturable absorbers (SAs). The hybrid PPy/graphene heterostructure SA was obtained using the wet transfer process of a graphene layer. This approach led to significant improvements in optical properties, including a ~7.2% increase in linear optical absorption, a 2.5-fold increase in modulation depth, and a third decrease in saturable intensity at 1550 nm due to the additional optical absorption and the π-π interaction between PPy nanoplates and the graphene layer. By inserting the PPy/graphene heterostructure SA into the passively mode-locked fiber laser cavity, 1559 nm ultrashort laser pulses were generated, with an average output power of 1.24 mW, a 815 fs pulse width, and a repetition frequency of 3.26 MHz. Our experimental results demonstrate that the prepared PPy SA has excellent nonlinear optical characteristics, providing a new opportunity for the generation of ultrashort laser pulses. Full article

We reported on a generation of 27 nm spectral bandwidth, two-port output ultrashort pulses directly from an all-normal-dispersion passively mode-locked Yb-fiber laser. Based on the nonlinear polarization rotation (NPR) mode-locking technique, high pump power and optical devices with high damage thresholds were introduced to achieve broad spectral bandwidth and strong output power. The dual wavelengths were emitted from the clockwise and counterclockwise ports, respectively, and self-started mode-locking was achieved. The bidirectional output laser generates stable pulses with up to 223.5 mW average power at a 46.04 MHz repetition rate, corresponding to a pulse energy of 5 nJ. The bidirectional ultrashort outputs of the laser provide potential applications in supercontinuum generation and medical and biological applications. Full article

This study reports a novel MAX phase material, Mo₂TiAlC₂, as a passively mode-locking (PML) saturable absorber (SA) for a Tm:YAP laser operating in the 2 μm wavelength range. The systematic characterization of its nonlinear optical properties was quantitatively analyzed using I-scan methodology, demonstrating a significant modulation depth of 3.5%, which indicated strong nonlinear optical activity. Within the realm of optimal cavity conditions, a remarkable performance by the PML configuration can be discerned. A stable pulsed emission was manifested at 1937 nm, wherein an average output power reaching 620 mW was achieved. A pulse temporal span of 989.5 ps was acquired with a corresponding repetition frequency of 103.1 MHz, indicating robust mode-locked synchronization. Notably, the beam quality factors (M²) along the orthogonal spatial axes were observed with values measuring 1.12 and 1.18, respectively, indicating propagation characteristics close to those of diffraction-limited beams. Full article

A temperature-sensing scheme is realized by a passively mode-locked Yb-doped fiber laser based on the nonlinear optical loop mirror (NOLM). The ambient temperature can be measured by detecting the pulse repetition frequency of the mode-locked fiber laser by an oscilloscope. When the ambient temperature increases from −40 °C to 6 °C, the pulse repetition frequency decreases linearly with a temperature sensitivity of 72.548 Hz/°C. The experimental results prove the feasibility of the mode-locked laser sensor operating in a low-temperature environment. Full article

Quasi-one-dimensional (quasi-1D) transition metal chalcogenides (TMCs), a subclass of low-dimensional materials, have attracted significant attention due to their unique optical and electronic properties, making them promising candidates for nonlinear photonics. In this work, NbTe₄, a quasi-1D transition metal tetrachalcogenide, was synthesized and employed for the first time as a broadband saturable absorber (SA) for pulsed laser applications. The nonlinear optical (NLO) properties of NbTe₄ were systematically characterized at 1.0 μm, 2.0 μm, and 3.0 μm, revealing saturation intensities of 59.53 GW/cm², 14 GW/cm², and 6.8 MW/cm², with corresponding modulation depths of 17.4%, 5.3%, and 21.5%. Utilizing NbTe₄-SA, passively Q-switched (PQS) pulses were successfully generated in the 1.0 μm and 2.0 μm bands, achieving pulse durations of 86 ns and 2 μs, respectively. Furthermore, stable mode-locked operation was demonstrated in an Er-doped fluoride fiber laser at 3.0 μm, yielding a pulse duration of 19 ps. These results establish NbTe₄ as a highly promising broadband SA material for next-generation ultrafast photonic devices and pave the way for the development of other quasi-1D materials in nonlinear optics. Full article

In the presented work, erbium fiber lasers operating in the pulsed mode with a nonlinear element containing a vanadium oxide saturable absorber are demonstrated. The structure of the saturable absorber is based on a segment of thinned silica fiber coated with a thin-film vanadium oxide by the method of metalorganic chemical vapor deposition. A fiber laser scheme is demonstrated that allows controlling the transmission of the internal cavity of the resonator during laser generation and deposition of a thin film. We have demonstrated a method for obtaining and annealing nanocoatings with laser generation control. We controlled the laser output parameters directly during the synthesis of the saturable absorber material. Vanadium oxides obtained in the work demonstrated the Mott–Paierls phase transition practically at room temperature. In this work, the optical characteristics of the output radiation of a fiber laser with a saturable absorber were measured. At temperatures above 70 °C, the coatings demonstrate a passive Q-switch with a repetition rate of 38 kHz and a pulse duration of 3.8 μs. At temperatures below the phase transition, a short-term mode-locking mode occurs. The transmission jump at a wavelength of about 1350 nm during structural rearrangement was 24%. For comparison, VO₂ nanopowder in a polydimethylsiloxane elastomer matrix was used as a saturable absorber material. The nanopowder modulator made it possible to obtain pulses with a frequency of 27 kHz and a duration of about 7.2 μs. Full article

A Hz level narrow linewidth all-optical microwave oscillator based on the torsional radial acoustic modes (TR_2,m) of a single-mode fiber (SMF) is proposed and validated. The all-optical microwave oscillator consists of a 20 km SMF main ring cavity and a 5 km SMF sub ring cavity. The main ring cavity provides forward stimulated Brillouin scattering gain and utilizes a nonlinear polarization rotation effect to achieve TR_2,7 mode locking. By combining the sub ring cavity with the main ring cavity and utilizing the Vernier effect, the TR_2,7 mode microwave photonic single longitudinal mode (SLM) output can be ensured. Meanwhile, the 6.281 Hz narrow linewidth of the TR_2,7 mode is achieved by reducing the intrinsic linewidth of the passive resonant cavity. The acoustic mode suppression ratio and side mode suppression ratio of the TR_2,7 mode were 43 dB and 54 dB, respectively. The power and frequency fluctuations of within 40 min were approximately ±0.49 dB and ±0.187 kHz, indicating good stability. At a frequency offset of 10 kHz, the TR_2,7 mode had a low phase noise value of −110 dBc/Hz. This solution can be used in various fields, such as high-precision radar detection, long-distance optical communication, and high-performance fiber optic sensing. Full article

CVBs (cylindrical vector beams) are widely used in optical imaging, optical trapping, material processing, etc. In this study, based on mode-selective couplers and passive mode-locking fiber technology, a cylindrical vector fiber amplifier with an MOPA (master oscillator power amplifier) structure was developed. In the experiment, the pre-amp stage reached 19.87 mW output power and a CVB output with a mode purity greater than 97%. The measured beam quality factor was M² = 2.1. The CVB output power obtained by the first-amp stage was 152.4 mW, and the mode purity was greater than 92%. The measured beam quality factor was M² = 1.99. The internal inhomogeneity and external effects of the isotropic LMA (large-mode-area) fiber led to a decrease in beam quality and mode purity. After amplification, the gain of the fundamental mode was higher and the power was greater, resulting in a greatly reduced mode purity. This CVB fiber amplifier yielded important research value in expanding the applications of high-power fiber lasers. Full article

Fiber lasers have been widely used in surgery with the development of fiber photonics. Since the human body is prone to myocardial infarction caused by blood clots, laser thrombolysis was proposed as a safe and efficient treatment. Mode-locked fiber lasers have high peak power and narrow pulse width. In order to observe the effect of laser thrombolysis with mode-locked fiber lasers, a 1.5 µm mode-locked fiber laser based on carbon nanotubes was built, showing a pulse width of 1.46 ps, a 3 dB bandwidth of 1.65 nm, and a repetition rate of 29.5 MHz. The output pulses were amplified by an erbium-doped fiber amplifier to the hundred-milliwatt level and were applied to the surface of a self-made thrombus. The influences of lasing power and time on the damage diameter of the thrombus surface were evaluated. A low threshold damage power of 45 mW was observed, which resulted from the high peak power of the mode-locked pulses. These results demonstrate that high ablation efficiency can be achieved by using mode-locked pulses with a narrow pulse width and high peak power. Full article

We demonstrate absorber-free passive and hybrid mode-locking at sub-GHz repetition rates, using a hybrid integrated extended cavity diode laser operating near 1550 nm. The laser is based on InP as a gain medium and a Si₃N₄ waveguide feedback circuit. Absorber-free Fourier domain mode-locking with ≈15 comb lines at around 0.2 mW total power is achieved with repetition rates around 500 MHz, using three highly frequency-selective micro-ring resonators that extend the on-chip cavity length to 0.6 m. To stabilize the repetition rate, hybrid mode-locking is demonstrated by weak RF modulation of the diode current. The RF injection reduces the Lorentzian linewidth component from 8.9 kHz to a detection-limited value of around 300 mHz. To measure the locking range of the repetition rate, the injected RF frequency is tuned with regard to the passive mode-locking frequency and the injected RF power is varied. The locking range increases approximately as a square-root function of the injected RF power. At 1 mW injection, a wide locking range of about 80 MHz is obtained. We also observe the laser maintaining stable mode-locking when the DC diode pump current is increased from 40 mA to 190 mA, provided that the cavity length is maintained constant with thermo-refractive tuning. Full article

A wavelength-switchable ytterbium-doped mode-locked fiber laser is reported in this article. Two Mach–Zehnder interferometers (MZIs, denoted as MZI1, MZI2) with close free spectral ranges (FSRs) are connected in series to form a Vernier effect sensor. By utilizing the filtering effect of the Vernier effect sensor, the wavelength-switchable output of an ytterbium-doped mode-locked fiber laser is realized. When the 3 dB bandwidth of the Vernier effect filter is set to be 5.31 nm around 1073.42 nm, stable dissipative solitons are obtained. Stretching MZI1 horizontally, the central wavelengths of the pulses can be switched among 1073.42 nm, 1055.38 nm, and 1036.22 nm, with a total tunable central wavelength range of 37.2 nm. When the 3 dB bandwidth of the Vernier effect filter is set to be 4.07 nm, stable amplifier similaritons are obtained. Stretching MZI1 horizontally, the central wavelengths of the pulses are switchable among 1072.71 nm, 1060.15 nm, 1048.92 nm, and 1037.26 nm, with a total tunable central wavelength range of 35.15 nm. Compared with traditional fiber interference filters, the Vernier effect filter has a higher sensitivity, making wavelength switching more convenient and providing a wider tuning range for the ytterbium-doped mode-locked fiber laser. Full article

The passively Q-switched mode-locked (QML) operation of a Tm:CaGdAlO₄ (Tm:CALGO) bulk laser pumped by a wavelength-tunable Ti:sapphire oscillator using molybdenum disulfide (MoS₂) as a saturable absorber was demonstrated. By using an output coupler with 3% transmittance, Q-switched mode-locked operation can be achieved with 3.56 W absorbed pump power. At a pump power of 6.77 W, laser pulses with the maximum average power of 1.44 W were obtained, corresponding to a slope efficiency of 21.3%. The laser delivered pulses centered at 1927 nm with a repetition frequency of 131.6 MHz. The experimental results confirm the promising application of the MoS₂ in high-power Q-switched mode-locked solid-state lasers at 2 µm. Full article