Search Results (49)

Biogenic amines (BA) are simple organic bases of low molecular weight, formed during decarboxylation of amino acids. Ripened cheeses provide suitable conditions for the development of bacteria and production of BAs. The aim of the present study was to investigate the presence of eight BAs in ripened cheese samples (n = 125) using a high-performance liquid chromatography with diode array detector (HPLC-DAD). Furthermore, microbiological analyses towards identification of bacteria using matrix-assisted laser desorption ionisation—time of flight mass spectrometry (MALDI-TOF MS) were performed. Cadaverine and putrescine were detected in 28.0% and 20.8% of cheese samples at concentrations ranging from 6.12 to 2871 mg/kg and 5.74 to 441 mg/kg, respectively. High amounts of putrescine and cadaverine in cheeses were associated with the presence of Hafnia alvei. Tyramine was identified in 28.0% of samples in the concentration range of 5.62–646 mg/kg. High concentrations of this amine was found in cheeses containing Enterococcus faecium and Enterococcus faecalis. Histamine content, the only BA restricted in food according to Regulation 2073/2005, was observed above 100 mg/kg in 11.2% of the cheeses. Ripened cheeses available on the local retail market may contain significant levels of biogenic amines and may pose a potential health hazard to consumers. Full article

In this study, we describe the preparation of carbon dots (CDs) from natural charcoal by laser ablation in a liquid. A continuum wave (CW) laser diode operating at a wavelength of 450 nm, hitting a solid carbon target placed into a biocompatible liquid, constituted of a phosphate-buffered saline (PBS) solution and distilled water, was used for the generation of the CDs suspension. Exploring the practical applications of carbon dots, it was observed that the luminescence of the produced CDs can be used as bioimaging in living organisms, environmental monitoring, chemical analysis, targeted drug delivery, disease diagnosis, therapy, and others. The CDs’ luminescence can be induced by UV irradiation and, as demonstrated in this study, by energetic MeV proton beams. The fluorescence was revealed mainly at 480 nm when UV illuminated the CDs, and also in the region at 514–642 nm when the CDs were irradiated by energetic proton ions. Atomic force microscopy (AFM) of the CD films revealed their spherical shape with a size of about 10 nm. The significance of the manuscript lies in the use of CDs produced by laser ablation exhibiting luminescence under irradiation of an energetic proton beam. Full article

Europium(III) β-diketone and organic carboxylic acid complexes are designable, easy to prepare, and easy to modify and have excellent fluorescence properties (narrow emission spectral band, high colour purity, long fluorescence lifetime, high quantum yield, and a spectral emission range covering both the visible and near-infrared regions). These complexes play important roles in popular fields such as laser and fibre-optic communications, medical diagnostics, immunoassays, fluorescent lasers, sensors, anticounterfeiting, and organic light-emitting diodes (OLEDs). In the field of light-emitting materials, europium complexes are especially widely used in OLED lamps, especially because of their high-efficiency emission of red (among the three primary colours); accordingly, these complexes can be mixed with blue and green phosphors to obtain high-efficiency white phosphors that can be excited by near-ultraviolet light. This paper reviews the red-light-emitting europium complexes with β-diketone and organic carboxylic acid as ligands that have been studied over the last five years, describes the current problems, and discusses their future application prospects. Full article

AlGaN is attractive for fabricating deep ultraviolet (DUV) optoelectronic and electronic devices of light-emitting diodes (LEDs), photodetectors, high-electron-mobility field-effect transistors (HEMTs), etc. We investigated the quality and optical properties of Al_xGa_1−xN films with high Al fractions (60–87%) grown on sapphire substrates, including AlN nucleation and buffer layers, by metal–organic chemical vapor deposition (MOCVD). They were initially investigated by high-resolution X-ray diffraction (HR-XRD) and Raman scattering (RS). A set of formulas was deduced to precisely determine x(Al) from HR-XRD data. Screw dislocation densities in AlGaN and AlN layers were deduced. DUV (266 nm) excitation RS clearly exhibits AlGaN Raman features far superior to visible RS. The simulation on the AlGaN longitudinal optical (LO) phonon modes determined the carrier concentrations in the AlGaN layers. The spatial correlation model (SCM) analyses on E₂(high) modes examined the AlGaN and AlN layer properties. These high-x(Al) Al_xGa_1−xN films possess large energy gaps E_g in the range of 5.0–5.6 eV and are excited by a DUV 213 nm (5.8 eV) laser for room temperature (RT) photoluminescence (PL) and temperature-dependent photoluminescence (TDPL) studies. The obtained RTPL bands were deconvoluted with two Gaussian bands, indicating cross-bandgap emission, phonon replicas, and variation with x(Al). TDPL spectra at 20–300 K of Al_0.87Ga_0.13N exhibit the T-dependences of the band-edge luminescence near 5.6 eV and the phonon replicas. According to the Arrhenius fitting diagram of the TDPL spectra, the activation energy (19.6 meV) associated with the luminescence process is acquired. In addition, the combined PL and time-resolved photoluminescence (TRPL) spectroscopic system with DUV 213 nm pulse excitation was applied to measure a typical AlGaN multiple-quantum well (MQW). The RT TRPL decay spectra were obtained at four wavelengths and fitted by two exponentials with fast and slow decay times of ~0.2 ns and 1–2 ns, respectively. Comprehensive studies on these Al-rich AlGaN epi-films and a typical AlGaN MQW are achieved with unique and significant results, which are useful to researchers in the field. Full article

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a commonly used conductive polymer in organic optoelectronic devices. The conductivity and work function of the PEDOT:PSS are two important parameters that significantly determine the performance of the associated optoelectronic device. Traditionally, some solvents were doped in PEDOT:PSS solution or soaked in PEDOT:PSS film to improve its electrical conductivity, but they damaged the integrity of PEDOT:PSS and reduce the film’s work function. Herein, for the first time, we use femtosecond laser irradiation to modify the electrical conductivity and work function of PEDOT:PSS film. We proposed that the femtosecond laser irradiation could selectively remove the superficial insulative PSS, thereby improving the electrical conductivity of the film. The femtosecond laser-irradiated PEDOT:PSS film was further employed as a hole injection layer within cutting-edge perovskite light-emitting diodes (PeLEDs). A maximum luminosity of 950 cd/m² was obtained in PeLEDs irradiated by femtosecond laser light in thin films, which is five times higher than that of the controlled device. Moreover, the external quantum efficiency of the devices was also increased from 4.6% to 6.3%. This work paved a cost-effective way to regulate the electrical properties of the PEDOT:PSS film. Full article

Chlorophyll has long been used as a natural indicator of plant health and photosynthetic efficiency. Laser-induced fluorescence (LIF) is an emerging technique for understanding broad spectrum organic processes and has more recently been used to monitor chlorophyll response in plants. Previous work has focused on developing a LIF technique for imaging moss mats to identify metal contamination with the current focus shifting toward application to moss fronds and aiding sample collection for chemical analysis. Two laser systems (CoCoBi a Nd:YGa pulsed laser system and Chl-SL with two blue continuous semiconductor diodes) were used to collect images of moss fronds exposed to increasing levels of Cu (1, 10, and 100 nmol/cm²) using a CMOS camera. The best methods for the preprocessing of images were conducted before the analysis of fluorescence signatures were compared to a control. The Chl-SL system performed better than the CoCoBi, with dynamic time warping (DTW) proving the most effective for image analysis. Manual thresholding to remove lower decimal code values improved the data distributions and proved whether using one or two fronds in an image was more advantageous. A higher DTW difference from the control correlated to lower chlorophyll a/b ratios and a higher metal content, indicating that LIF, with the aid of image processing, can be an effective technique for identifying Cu contamination shortly after an event. Full article

A theoretical analysis is presented for a recently proposed high-speed µ-OLED optically pumped organic laser. We confirm that for this configuration, the laser threshold is reached at a lower current density than in the case of a direct-electrically pumped organic laser diode while generating pulses of order $15 \mathrm{n}\mathrm{s}$ duration. With a validated model for the electrically pumped organic light-emitting diode (OLED), we simulate the generation of light pulses. This light is fed into the organic laser section, where it optically pumps the emitting organic medium. The full model includes field-enhanced Langevin recombination in the OLED, Stoke-shifted reabsorption in both the OLED and organic laser, and an optical cavity in the latter. We numerically demonstrate $2 \mathrm{G}\mathrm{H}\mathrm{z}$ modulation and conjecture the feasibility of $~0.025 \mathrm{M}\mathrm{b}/\mathrm{s}$ data transmission with this device. Full article

Luminous efficiency is a pivotal factor for assessing the performance of optoelectronic devices, wherein light loss caused by diverse factors is harvested and converted into the radiative mode. In this study, we demonstrate a nanoscale vacuum photonic crystal layer (nVPCL) for light extraction enhancement. A corrugated semi-transparent electrode incorporating a periodic hollow-structure array was designed through a simulation that utilizes finite-difference time-domain computational analysis. The corrugated profile, stemming from the periodic hollow structure, was fabricated using laser interference lithography, which allows the precise engineering of various geometrical parameters by controlling the process conditions. The semi-transparent electrode consisted of a 15 nm thick Ag film, which acted as the exit mirror and induced microcavity resonance. When applied to a conventional green organic light-emitting diode (OLED) structure, the optimized nVPCL-integrated device demonstrated a 21.5% enhancement in external quantum efficiency compared to the reference device. Further, the full width at half maximum exhibited a 27.5% reduction compared to that of the reference device, demonstrating improved color purity. This study presents a novel approach by applying a hybrid thin film electrode design to optoelectronic devices to enhance optical efficiency and color purity. Full article

Background: Candida albicans and similar species are significant pathogens in immunocompromised and hospitalized individuals, known for mucosal colonization and bloodstream/organ invasion. Many pathogenic fungi, including these species, exhibit autofluorescence (R/OF) under specific light conditions, a feature crucial for their detection. Aim: We investigated the use of a 405 nm diode laser for the direct observation of red/orange autofluorescence of Candida spp., common in the oral cavity, exploring its potential in health screenings. Methods: This study utilized cultures of Candida spp. on Sabouraud dextrose agar with Qdot 655 and 685 for fluorescence benchmarking, illuminated using a 405 nm diode laser (continuous wave, power 250 mW, 0.0425 J/cm² fluence, 0.0014 W/cm² power density). Images were captured using a yellow-filter camera at set intervals (48 to 144 h). Visual and computational analyses evaluated the R/OF in terms of presence, intensity, coloration, and intra-colony variation. Results: Most Candida strains displayed red/orange autofluorescence at all observation times, characterized by varied coloration and intra-colony distribution. Initially, there was an increase in R/OF intensity, which then stabilized in the later stages of observation. Conclusions: The majority of the Candida strains tested are capable of emitting R/OF under 405 nm laser light. This finding opens up new possibilities for integrating R/OF detection into routine dental screenings for Candida spp. Full article

In the context of the quest for the Organic Laser Diode, we present the multiscale fabrication process optimization of mixed-order distributed-feedback micro-cavities integrated in nanosecond-short electrical pulse-ready organic light-emitting diodes (OLEDs). We combine ultra-short pulsed electrical excitation and laser micro-cavities. This requires the integration of a highly resolved DFB micro-cavity with an OLED stack and with microwave electrodes. In a second challenge, we tune the cavity resonance precisely to the electroluminescence peak of the organic laser gain medium. This requires precise micro-cavity fabrication performed using e-beam lithography to pattern gratings with a precision in the nanometer scale. Optimal DFB micro-cavities are obtained with 300 nm thick hydrogen silsesquioxane negative-tone e-beam resist on 50 nm thin indium tin oxide anode exposed with a charge quantity per area (i.e., dose) of 620 µC/cm², developed over 40 min in tetramethylammonium hydroxide diluted in water. We show that the integration of the DFB micro-cavity does not hinder the pulsed electrical operability of the device, which exhibits a peak current density as high as 14 kA/cm². Full article

In the present work, a hybrid organic–inorganic semiconductor (HOIS) has been used to modify the surface of a graphite paste/silica (G–SiO₂) film electrode on a conducting glass substrate to fabricate a promising, sensitive voltammetric sensor for the vasoconstrictor bisartan BV6, which could possibly treat hypertension and COVID-19. The HOIS exhibits exceptional optoelectronic properties with promising applications not only in light-emitting diodes, lasers, or photovoltaics but also for the development of voltammetric sensors due to the ability of the immobilized HOIS lattice to interact with ions. This study involves the synthesis and characterization of an HOIS and its attachment on the surface of a G–SiO₂ film electrode in order to develop a nanocomposite, simple, sensitive with a fast-response, low-cost voltammetric sensor for BV6. The modified HOIS electrode was characterized using X-ray diffraction, scanning electron microscopy, and optical and photoluminescence spectroscopy, and its electrochemical behavior was examined using cyclic voltammetry. Under optimal conditions, the modified G–SiO₂ film electrode exhibited a higher electrocatalytic activity towards the oxidation of BV6 compared to a bare graphite paste electrode. The results showed that the peak current was proportional to BV6 concentration with a linear response range from 0 to 65 × 10⁻⁶ (coefficient of determination, 0.9767) and with a low detection limit of 1.5 × 10⁻⁶ M (S/N = 3), estimated based on the area under a voltammogram, while it was 3.5 × 10⁻⁶ for peak-based analysis. The sensor demonstrated good stability and reproducibility and was found to be appropriate for the determination of drug compounds such as BV6. Full article

Organometal halide perovskites have achieved great success in solution-processed photovoltaics. The explorations quickly expanded into other optoelectronic applications, including light-emitting diodes, lasers, and photodetectors. An in-depth analysis of the special scale effects is essential to understand the working mechanisms of devices and optimize the materials towards an enhanced performance. Generally speaking, organometal halide perovskites can be classified in two ways. By controlling the morphological dimensionality, 2D perovskite nanoplatelets, 1D perovskite nanowires, and 0D perovskite quantum dots have been studied. Using appropriate organic and inorganic components, low-dimensional organic–inorganic metal halide hybrids with 2D, quasi-2D, 1D, and 0D structures at the molecular level have been developed and studied. This provides opportunities to investigate the scale-dependent properties. Here, we present the progress on the characteristics of scale effects in organometal halide perovskites in these two classifications, with a focus on carrier diffusion, excitonic features, and defect properties. Full article

Photobiomodulation (PBM) is the regulation of biological processes using light energy from sources such as lasers or light-emitting diodes. Components of the nervous system, such as the brain and peripheral nerves, are important candidate PBM targets due to the lack of therapeutic modalities for the complete cure of neurological diseases. PBM can be applied either to regenerate damaged organs or to prevent or reduce damage caused by disease. Although recent findings have suggested that neural cells can be regenerated, which contradicts our previous understanding, neural structures are still thought to have weaker regenerative capacity than other systems. Therefore, enhancing the regenerative capacity of the nervous system would aid the future development of therapeutics for neural degeneration. PBM has been shown to enhance cell differentiation from stem or progenitor cells to near-target or target cells. In this review, we have reviewed research on the effects of PBM on neurogenesis in the central nervous system (e.g., animal brains) and the peripheral nervous system (e.g., peripheral sensory neural structures) and sought its potential as a therapeutic tool for intractable neural degenerative disorders. Full article

In the context of the quest for the organic laser diode, we address a key challenge to design and fabricate high-quality factor cavities compatible with electrical excitation of organic semiconductors. More precisely, we present the design of DFB micro-cavities for integration in organic laser diodes and their validation under optical pumping. To design high-quality factor mixed-order DFB micro-cavities, we consider the half- and quarter-wavelength multilayered system and use the optical waveguide analysis to quantify the effective indices of the high and low indices, and the matrix transfer method to calculate the reflectances. Matrices of DFB micro-cavities made from different doses and different grating periods were fabricated. We then identified those showing laser emission under optical pumping as an indication of optimal matching of their resonance wavelength with respect to the electroluminescence peak of the organic gain material. Potential applications of organic laser diodes deal with light communication, spectroscopy, sensors, and other applications where heterogenous integration is important. Full article

The two-state lasing phenomenon, which manifests itself in simultaneous laser emission through several optical transitions of quantum dots, is studied in microdisk diode lasers with different cavity diameters. The active region represents a multiply stacked array of self-organized InAs/InGaAs/GaAs quantum dots emitting in the wavelength range of 1.1–1.3 µm. Two-state lasing, which involves the ground-state and the first excited-state optical transitions, is observed in microdisks with cavity diameters of 20 to 28 µm, whereas two-state lasing via the first and the second excited-state optical transitions is observed in 9 µm microdisks. The threshold currents for one-state and two-state lasing are investigated as functions of the microdisk diameter. Optical loss in the microdisk lasers is evaluated by comparing the two-state lasing behavior of the microdisks with that of edge-emitting stripe lasers made of the same epitaxial wafer. Full article