Search Results (27)

Several strategies, including UV detection with a diode array detector (DAD), laser-induced fluorescence (LIF), derivatization reactions, the use of micelles in the separation buffer, as well as online preconcentration techniques based on pressure-assisted electrokinetic injection (PAEKI), and offline preconcentration using solid-phase extraction (SPE) columns containing quaternary amine groups with a chloride counterion, were investigated for the simultaneous separation and signal amplification of free thyroid hormones (THs) in biological samples. Moreover, a sensitive method for the quantification of THs in selected biological samples using micellar electrokinetic capillary chromatography with LIF detection (MEKC-LIF) was developed. The THs present in biological samples (L-tyrosine, T2, T3, rT3, T4, and DIT) were successfully separated in less than 10 min. The analytes were separated following a derivatization procedure with fluorescein isothiocyanate isomer I (FITC). A background electrolyte (BGE) composed of 20 mM sodium tetraborate (Na₂B₄O₇) and 20 mM sodium dodecyl sulphate (SDS) was employed. Key validation parameters such as linearity, precision, limits of detection (LOD), and limits of quantification (LOQ) were determined. The use of PAEKI for the electrophoretic determination of free THs demonstrates significant potential for monitoring these hormones in real urine samples due to its high sensitivity and efficiency. Full article

Tetrodotoxin (TTX) is a representative natural toxin causing pufferfish food poisoning, which is especially prominent in East and Southeast Asia, including Japan. TTX has been analyzed through post-column derivatization high-performance liquid chromatography (HPLC), ion-pair LC-MS(/MS), and hydrophilic interaction liquid chromatography (HILIC)-MS(/MS) as alternatives to the mouse bioassay method. However, post-column derivatization requires a system for online derivatization reactions, and with the ion-pair LC-MS approach, it is difficult to remove residual ion-pair reagents remaining in the equipment. Moreover, HILIC-MS provides poor separation compared to reversed-phase (RP) HPLC and requires a long time to reach equilibration. Therefore, we decided to develop a TTX analytical method using pre-column derivatization and RP HPLC for the rapid assessment of outbreak samples, including food remnants. In this study, we focused on the vic-diol moiety of TTX and designed a new derivatization reagent coded as NBD-H-DAB. This NBD-H-DAB was synthesized from 4-hydrazino-7-nitro-2,1,3-benzoxadiazole (NBD-H) and 3-fluoro-2-formylphenylboronic acid (FFPBA) with a simple reaction system and rapidly converted to its boronate form, coded NBD-H-PBA, in an aqueous reaction solution. The NBD-H-PBA demonstrated appropriate hydrophobicity to be retained on the RP analytical column and successfully detected with a UV spectrometer. It was easily reacted with the vic-diol moiety of TTX (C6 and C11) to synthesized a boronic ester. The derivatized TTX could be detected using the RP HPLC-UV, and the limit of detection in the fish flesh samples was 0.06 mg/kg. This novel pre-column derivatization of TTX with NBD-H-PBA proves capable for the analysis of TTX. Full article

Rapid detection of harmful estrogens in cosmetics is essential in protecting public health. To reduce time-consuming pretreatment and analytical procedures, a novel reactive paper spray ionization mass spectrometry (RPSI-MS) methodology was developed. RPSI-MS is suitable for quantitatively analyzing estrogens in cosmetics by utilizing an online derivatization reaction between estrogens and 2-fluoro-1-methyl-pyridinium-p-toluene-sulfonate (FluMP). Using estradiol valerate as the internal standard (I.S.), three estrogens, estradiol, estriol, and ethinyloestradiol, in cosmetics were quantitatively characterized within minutes. Multiple parameters were optimized including FluMP concentration and volume, triethylamine amount as well as the drying time. The three estrogens displayed good linearity ranging from 0.002 to 1 μg/mL, with R² above 0.99. The recovery results of all the estrogens were within 80~111%. The limit of detection (LOD) was 0.001 μg/mL for the three estrogens. Compared to conventional paper spray ionization mass spectrometry (PSI-MS), extraction is not required and the detection sensitivity of RPSI-MS was improved by 34,000, 80,000, and 1400 times for estradiol, estriol, and ethinyloestradiol, respectively. The protocol established in this paper is sensitive, eco-friendly, and suitable for rapid testing of estrogens in cosmetics. Full article

Despite the fact that strong routine separation methodologies can give reliable specificity and validity at usual working pharmaceutical concentrations, they may fail at very low concentration levels. This poses considerable challenges for researchers investigating product purity and therapeutic drug monitoring. Sensitivity enhancement procedures are thus required to maximize the performance of separation techniques. Solid-phase extraction/solid-phase enrichment (SPE/SPEn) and pre-, post-, and in-column derivatization, as well as the use of sensitive detection devices, are the simplest strategies for improving sensitivity of separation-based analytical techniques. Large-volume injection of samples with online SPE/SPEn coupled with separation techniques increased sensitivity and improved detection as well as quantification limits without affecting peak shape and system performance. Although the primary purpose of derivatization is to improve sensitivity and selectivity, greener derivatization is growing in popularity and should be considered in analytical chemistry. In general, two strategies are essential for accomplishing greener derivatization goals. The first is the search for and use of ecologically acceptable derivatizing reagents, solvents, and reaction conditions. The second is miniaturization and automation of analytical methods. This review discusses significant advances in separation-based analytical techniques, specifically enrichment approaches and detector signal improvement for pharmaceutical quantification in various matrices at very low concentration levels. As a result of improved analytical systems setup in drug assays, the possibility of high-throughput analyses was also highlighted. Full article

Quinones are frequently used as derivatization reagents in HPLC analysis to improve detection sensitivity. In the present study, a simple, sensitive, and selective chemiluminescence (CL) derivatization strategy for biogenic amines, prior to their HPLC-CL analysis, was developed. The novel CL derivatization strategy was established based on using anthraquinone-2-carbonyl chloride as derivatizing agent for amines and then using the unique property of the quinones’ moiety to generate reactive oxygen species (ROS) in response to UV irradiation. Typical amines such as tryptamine and phenethylamine were derivatized with anthraquinone-2-carbonyl chloride and then injected into an HPLC system equipped with an online photoreactor. The anthraquinone-tagged amines are separated and then UV-irradiated when they pass through a photoreactor to generate ROS from the quinone moiety of the derivative. Tryptamine and phenethylamine can be determined by measuring the chemiluminescence intensity produced by the reaction of the generated ROS with luminol. The chemiluminescence disappears when the photoreactor is turned off, suggesting that ROS are no longer generated from the quinone moiety in the absence of UV irradiation. This result indicates that the generation of ROS could be controlled by turning the photoreactor on and off. Under the optimized conditions, the limits of detection for tryptamine and phenethylamine were 124 and 84 nM, respectively. The developed method is successfully applied to determine the concentrations of tryptamine and phenethylamine in wine samples. Full article

11-Oxygenated androgens (11-OAs) are being discussed as potential biomarkers in diagnosis and therapy control of disorders with androgen excess such as congenital adrenal hyperplasia and polycystic ovary syndrome. However, quantification of 11-OAs by liquid chromatography-tandem mass spectrometry (LC-MS/MS) still relies on extensive sample preparation including liquid–liquid extraction, derivatization and partial long runtimes, which is unsuitable for high-throughput analysis under routine laboratory settings. For the first time, an established online-solid-phase extraction-LC-MS/MS (online-SPE-LC-MS/MS) method for the quantitation of seven serum steroids in daily routine use was extended and validated to include 11-ketoandrostenedione, 11-ketotestosterone, 11β-hydroxyandrostenedione and 11β-hydroxytestosterone. Combining a simple protein precipitation step with fast chromatographic separation and ammonium fluoride-modified ionization resulted in a high-throughput method (6.6 min run time) featuring lower limits of quantification well below endogenous ranges (63–320 pmol/L) with recoveries between 85% and 117% (CVs ≤ 15%). Furthermore, the ability of this method to distinguish between adrenal and gonadal androgens was shown by comparing 11-OAs in patients with hyperandrogenemia to healthy controls. Due to the single shot multiplex design of the method, potential clinically relevant ratios of 11-OAs and corresponding androgens were readily available. The fully validated method covering endogenous concentration levels is ready to investigate the diagnostic values of 11-OAs in prospective studies and clinical applications. Full article

Pre-column fluorescent derivatization has been used for the fast quantification of amino acids using high-performance liquid chromatography (HPLC) systems. However, it generally requires an offline in-vial derivatization process with multiple derivatization reagents. The offline derivatization requires the same number of reaction vials as the number of sample vials for use as a reaction chamber for the derivatization reaction in an autosampler. Therefore, the number of samples analyzed per batch using the pre-column derivatization method is halved. To benefit from the pre-column derivatization method, we transformed the derivatization process from an offline chamber process to an online in-needle process (in-needle Pre-column Derivatization for Amino acids Quantification; iPDAQ). Fluorescent derivatization in the injection needle obviated the need for vacant vials as reaction chambers. Consequently, the throughput per batch improved up to two times, and the consumption of derivatization reagents was reduced to less than one-tenth of that in the conventional vial method. We demonstrated to separate and quantify the amino acids in various biological samples. Herein, we presented a novel HPLC-based amino acid quantification method that enables the continuous analysis of a large number of samples. The iPDAQ facilitates accurate amino acid quantification due to the automation of derivatization and achieves improvement in the throughput and reduction of analysis labor. Full article

Herein, we report a new automated flow method based on zone fluidics for the simultaneous determination of homocysteine and homocysteine thiolactone using fluorimetric detection (λ_ext = 370 nm/λ_em = 480 nm). Homocysteine thiolactone is hydrolyzed on-line in alkaline medium (1 mol L⁻¹ NaOH) to yield homocysteine, followed by reaction with o-phthalaldehyde in a single step. Derivatization is rapid without the need of elevated temperatures and stopped-flow steps, while specificity is achieved through a unique reaction mechanism in the absence of nucleophilic compounds. Mixtures of the analytes can be analyzed quantitatively after specific separation with fluorosurfactant-capped gold nanoparticles that are selectively aggregated by homocysteine, leaving the thiolactone analogue in solution. As low as 100 nmol L⁻¹ of the analyte(s) can be quantified in aqueous solutions, while concentrations > 2 μmol L⁻¹ can be analyzed in artificial and real urine matrix following 20-fold dilution. The percent recoveries ranged between 87 and 119%. Full article

Vicinal diols are important signaling metabolites of various inflammatory diseases, and some of them are potential biomarkers for some diseases. Utilizing the rapid reaction between diol and 6-bromo-3-pyridinylboronic acid (BPBA), a selective and sensitive approach was established to profile these vicinal diols using liquid chromatography-post column derivatization coupled with double precursor ion scan-mass spectrometry (LC-PCD-DPIS-MS). After derivatization, all BPBA-vicinal-diol esters gave a pair of characteristic isotope ions resulting from ⁷⁹Br and ⁸¹Br. The unique isotope pattern generated two characteristic fragment ions of m/z 200 and 202. Compared to a traditional offline derivatization technique, the new LC-PCD-DPIS-MS method retained the capacity of LC separation. In addition, it is more sensitive and selective than a full scan MS method. As an application, an in vitro study of the metabolism of epoxy fatty acids by human soluble epoxide hydrolase was tested. These vicinal-diol metabolites of individual regioisomers from different types of polyunsaturated fatty acids were easily identified. The limit of detection (LOD) reached as low as 25 nM. The newly developed LC-PCD-DPIS-MS method shows significant advantages in improving the selectivity and therefore can be employed as a powerful tool for profiling vicinal-diol compounds from biological matrices. Full article

Using manual derivatization in gas chromatography-mass spectrometry samples have varying equilibration times before analysis which increases technical variability and limits the number of potential samples analyzed. By contrast, automated derivatization methods can derivatize and inject each sample in an identical manner. We present a fully automated (on-line) derivatization method used for targeted analysis of different matrices. We describe method optimization and compare results from using off-line and on-line derivatization protocols, including the robustness and reproducibility of the methods. Our final parameters for the derivatization process were 20 µL of methoxyamine (MeOx) in pyridine for 60 min at 30 °C followed by 80 µL N-Methyl-N-trimethylsilyltrifluoracetamide (MSTFA) for 30 min at 30 °C combined with 4 h of equilibration time. The repeatability test in plasma and liver revealed a median relative standard deviation (RSD) of 16% and 10%, respectively. Serum samples showed a consistent intra-batch median RSD of 20% with an inter-batch variability of 27% across three batches. The direct comparison of on-line versus off-line demonstrated that on-line was fit for purpose and improves repeatability with a measured median RSD of 11% compared to 17% using the same method off-line. In summary, we recommend that optimized on-line methods may improve results for metabolomics and should be used where available. Full article

An improved method for the online preconcentration, derivatization, and separation of phosphorylated compounds was developed based on the affinity of a Phos-tag acrylamide gel formed at the intersection of a polydimethylsiloxane/glass multichannel microfluidic chip toward these compounds. The acrylamide solution comprised Phos-tag acrylamide, acrylamide, and N,N-methylene-bis-acrylamide, while 2,2′-azobis[2-methyl-N-(2-hydroxyethyl)propionamide] was used as a photocatalytic initiator. The Phos-tag acrylamide gel was formed around the channel crossing point via irradiation with a 365 nm LED laser. The phosphorylated peptides were specifically concentrated in the Phos-tag acrylamide gel by applying a voltage across the gel plug. After entrapment of the phosphorylated compounds in the Phos-tag acrylamide gel, 5-(4,6-dichlorotriazinyl)aminofluorescein (DTAF) was introduced to the gel for online derivatization of the concentrated phosphorylated compounds. The online derivatized DTAF-labeled phosphorylated compounds were eluted by delivering a complex of phosphate ions and ethylenediamine tetraacetic acid as the separation buffer. This method enabled sensitive analysis of the phosphorylated peptides. Full article

Fatty acid profiling on gas chromatography–mass spectrometry (GC–MS) platforms is typically performed offline by manually derivatizing and analyzing small batches of samples. A GC–MS system with a fully integrated robotic autosampler can significantly improve sample handling, standardize data collection, and reduce the total hands-on time required for sample analysis. In this study, we report an optimized high-throughput GC–MS-based methodology that utilizes trimethyl sulfonium hydroxide (TMSH) as a derivatization reagent to convert fatty acids into fatty acid methyl esters. An automated online derivatization method was developed, in which the robotic autosampler derivatizes each sample individually and injects it into the GC–MS system in a high-throughput manner. This study investigated the robustness of automated TMSH derivatization by comparing fatty acid standards and lipid extracts, derivatized manually in batches and online automatically from four biological matrices. Automated derivatization improved reproducibility in 19 of 33 fatty acid standards, with nearly half of the 33 confirmed fatty acids in biological samples demonstrating improved reproducibility when compared to manually derivatized samples. In summary, we show that the online TMSH-based derivatization methodology is ideal for high-throughput fatty acid analysis, allowing rapid and efficient fatty acid profiling, with reduced sample handling, faster data acquisition, and, ultimately, improved data reproducibility. Full article

An on-line preconcentration system for the simultaneous determination of Copper (Cu) and manganese (Mn) in water samples was developed and coupled to a microwave-induced plasma optical emission spectrometer (MIP OES). The flow injection system was designed with a minicolumn packed with sisal fiber (Agave sisalana). A multivariate experimental design was performed to evaluate the influence of pH, preconcentration time, and eluent concentration. Optimal conditions for sample preparation were pH 5.5, preconcentration time was 90 s, and HCl 0.5 mol L⁻¹ was the eluent. The main figures of merit were detection limits 3.7 and 9.0 µg L⁻¹ for Cu and Mn, respectively. Precision was expressed as a relative standard deviation better than 10%. Accuracy was evaluated via spiked recovery assays with recoveries between 75–125%. The enrichment factor was 30 for both analytes. These results were adequate for water samples analysis for monitoring purposes. The preconcentration system was coupled and synchronized with the MIP OES nebulizer to allow simultaneous determination of Cu and Mn as a novel sample introduction strategy. The sampling rate was 20 samples/h. Sisal fiber resulted an economical biosorbent for trace element preconcentration without extra derivatization steps and with an awfully time of use without replacement complying with the principles of green analytical methods. Full article

Protein carbonylation, a marker of excessive oxidative stress, has been studied in the context of multiple human diseases related to oxidative stress. The variety of post-translational carbonyl modifications (carbonyl PTMs) and their low concentrations in plasma challenge their reproducible identification and quantitation. However, carbonyl-specific biotinylated derivatization tags (e.g., aldehyde reactive probe, ARP) allow for targeting carbonyl PTMs by enriching proteins and peptides carrying these modifications. In this study, an oxidized human serum albumin protein model (OxHSA) and plasma from a healthy donor were derivatized with ARP, digested with trypsin, and enriched using biotin-avidin affinity chromatography prior to nano reversed-phase chromatography coupled online to electrospray ionization tandem mass spectrometry with travelling wave ion mobility spectrometry (nRPC-ESI-MS/MS-TWIMS). The presented workflow addresses several analytical challenges by using ARP-specific fragment ions to reliably identify ARP peptides. Furthermore, the reproducible recovery and relative quantitation of ARP peptides were validated. Human serum albumin (HSA) in plasma was heavily modified by a variety of direct amino acid oxidation products and adducts from reactive carbonyl species (RCS), with most RCS modifications being detected in six hotspots, i.e., Lys10, Lys190, Lys199, Lys281, Lys432, and Lys525 of mature HSA. Full article

In leathers, formaldehyde is currently analyzed according to EN ISO 17226-1 standard, by reversed phase liquid chromatography after off-line precolumn derivatization with 2,4 dinitrophenylhydrazine (DNPH) in strong acidic conditions. We first demonstrate that this standard is not adapted to leather retanned with resins likely to release formaldehyde by hydrolysis. Indeed, formaldehyde content may be largely overestimated due to concomitant resin hydrolysis (in harsh acidic conditions) that releases formaldehyde during the derivatization step and during the waiting time on autosampler before analysis. Therefore, we thoroughly studied the derivatization step in order to propose new derivatization conditions. Replacing orthophosphoric acid by less acidic buffer solutions is not enough to avoid hydrolysis. A derivatization without adding acid is realized by solubilizing DNPH in acetonitrile instead of orthophosphoric acid. These conditions lead to a complete derivatization of formaldehyde in 3 h at 50 °C (in a water bath) while avoiding the hydrolysis of co-extracted dicyandiamide and melamine resins. The as-obtained leather extracts are stable over time. Formaldehyde contents found with this method agree with the formaldehyde content measured immediately at the end of derivatization reaction in standard conditions or with formaldehyde content measured by a home-designed flow injection analysis with acetylacetone online derivatization and UV detection. Full article