Search Results (10)

Cystic echinococcosis still remains a serious health and economic problem worldwide. The etiologic agent is Echinococcus granulosus sensu lato, giving origin to a fluid-filled cystic lesion. Therapy faces several challenges. Nanodrugs have shown promise as chemotherapeutics against hydatid cysts. The present study evaluated a highly safe lipid nano-polymeric capsule for its superior efficacy and ability to overcome drug resistance. Nanocapsule drugs were formulated into six groups: Albendazole, mebendazole, praziquantel, albendazole + mebendazole, albendazole + praziquantel, and praziquantel + mebendazole. The protoscolicidal effects of these six groups were assessed at 10, 60, and 120 min in three concentrations (1, 0.5, and 0.25 mg/mL). Drug formulations were evaluated via zeta potential, droplet size, solubility, particle size analyzer (PSA), and scanning electron microscopy. According to the PSA results, the mean size of the albendazole nanocapsules was 193.01 nm, mebendazole was 170.40 nm, and praziquantel was 180.44 nm. Albendazole + mebendazole showed the greatest protoscolicidal activity at a concentration of 1 mg/mL after 120 min. In contrast, each drug’s 0.25 mg/mL single-dose times showed the least protoscolicidal activity after 120 min. With the right application of nanotechnology, it is possible to produce safe and effective drugs, such as the polymeric combination of albendazole and mebendazole, which has promising implications. Full article

This research explored the use of a partially cross-linked graft copolymer (PCLNPG) as an innovative nanopolymer pore-forming agent to enhance polyphenylsulfone (PPSU) membranes for protein separation applications. The study systematically examined the impact of incorporating PCLNPG at varying concentrations on the morphological and surface properties of PPSU membranes. A thorough characterization of the resulting PPSU-PCLNPG membranes was performed, focusing on changes in morphology, water affinity, porosity, pore size, and pore size distribution. The experimental findings demonstrated that the use of PCLNPG led to a significantly more porous structure, as confirmed by SEM analysis, with notable increases in porosity and pore size (nearly double). Additionally, the hydrophilicity of the PPSU membrane was remarkably enhanced. Performance evaluations revealed a substantial improvement in pure water flux, with the flux nearly tripling. The BSA retention was directly correlated with the concentration of the PCLNPG pore former for a loading range of 0.25–0.75 wt.%. The incorporation of PCLNPG also reduced the membrane fouling propensity by reducing both cake layer resistance (Rc) and pore plugging resistance (Rp). These results underscore the potential of PCLNPG-PPSU membranes for wastewater reclamation and nutrient recovery applications. Full article

Antireflective and self-cleaning coatings have attracted increasing attention in the last few years due to their promising and wider applications such as stealth, display devices, sensing, and other fields. However, existing antireflective and self-cleaning functional material are facing problems such as difficult performance optimization, poor mechanical stability, and poor environmental adaptability. Limitations in design strategies have severely restricted coatings’ further development and application. Fabrication of high-performance antireflection and self-cleaning coatings with satisfactory mechanical stability remain a key challenge. Inspired by the self-cleaning performance of nano-/micro-composite structure on natural lotus leaves, SiO₂/PDMS/matte polyurethane biomimetic composite coating (BCC) was prepared by nano-polymerization spraying technology. The BCC reduced the average reflectivity of the aluminum alloy substrate surface from 60% to 10%, and the water contact angle (CA) was 156.32 ± 0.58°, illustrating the antireflective and self-cleaning performance of the surface was significantly improved. At the same time, the coating was able to withstand 44 abrasion tests, 230 tape stripping tests, and 210 scraping tests. After the test, the coating still showed satisfactory antireflective and self-cleaning properties, indicating its remarkable mechanical stability. In addition, the coating also displayed excellent acid resistance, which has important value in aerospace, optoelectronics, industrial anti-corrosion, etc. Full article

Significant amounts of oil remain in the reservoir after primary and secondary operations, and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study, new nano-polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85%, and that of cassava nanoparticles (CSNPs) was 90.53%. Synthesized materials were characterized through particle size distribution (PSA), Zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs, as found from the recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (−36.3 mV for PYNPs and −10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties, and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. A more incremental recovery (33.46%) was achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This paves the way for a new technology for polymer flooding that may replace the conventional method, which depends on partially hydrolyzed polyacrylamide (HPAM). Full article

Hip joint collapse is a very common health problem. Many cases need a joint replacement, so nano-polymeric composites are an ideal alternative solution. Due to its mechanical properties and wear resistance, HDPE might be considered a suitable alternative to frictional materials. The current research focuses on using hybrid nanofiller TiO₂ NPs and nano-graphene with various loading compositions to evaluate the best loading amount. The compressive strength, modules of elasticity, and hardness were examined via experiments. The COF and wear resistance were evaluated via a pin-on-disk tribometer. The worn surfaces were analyzed based on 3D topography and SEM images. The HDPE samples with various compositions of 0.5%, 1.0%, 1.5%, and 2.0 wt.% filling content of TiO₂ NPs and Gr (with a ratio of 1:1) were analyzed. Results revealed that hybrid nanofiller with a composition of 1.5 wt.% exhibits superior mechanical properties compared to other filling compositions. Moreover, the COF and wear rate decreased by 27.5% and 36.3%, respectively. Full article

In the last few years, the polymerization of monomers within the nanocavities of porous materials has been thoroughly studied and developed, allowing for the synthesis of polymers with tailored morphologies, chemical architectures and functionalities. This is thus a subject of paramount scientific and technological relevance, which, however, has not previously been analyzed from a general perspective. The present overview reports the state of the art on polymerization reactions in spatial confinement within porous materials, focusing on the use of anodized aluminum oxide (AAO) templates. It includes the description of the AAO templates used as nanoreactors. The polymerization reactions are categorized based on the polymerization mechanism. Amongst others, this includes electrochemical polymerization, free radical polymerization, step polymerization and atom transfer radical polymerization (ATRP). For each polymerization mechanism, a further subdivision is made based on the nature of the monomer used. Other aspects of “in situ” polymerization reactions in restricted AAO geometries include: conversion monitoring, kinetic studies, modeling and polymer characterization. In addition to the description of the polymerization process itself, the use of polymer materials derived from polymerization in AAO templates in nanotechnology applications, is also highlighted. Finally, the review is concluded with a general discussion outlining the challenges that remain in the field. Full article

Motivated by emerging high-temperature manufacturing processes deploying nano-polymeric coatings, the present study investigates nonlinear thermally radiative Oldroyd-B viscoelastic nanoliquid stagnant-point flow from a heated vertical stretching permeable surface. Robin (mixed derivative) conditions were utilized in order to better represent coating fabrication conditions. The nanoliquid analysis was based on Buongiorno’s two-component model, which features Brownian movement and thermophoretic attributes. Nonlinear buoyancy force and thermal radiation formulations are included. Chemical reactions (constructive and destructive) were also considered since coating synthesis often features reactive transport phenomena. An ordinary differential equation model was derived from the primitive partial differential boundary value problem using a similarity approach. The analytical solutions were achieved by employing a homotopy analysis scheme. The influence of the emerging dimensionless quantities on the transport characteristics was comprehensively explained using appropriate data. The obtained analytical outcomes were compared with the literature and good correlation was achieved. The computations show that the velocity profile was diminished with an increasing relaxation parameter, whereas it was enhanced when the retardation parameter was increased. A larger thermophoresis parameter induces an increase in temperature and concentration. The heat and mass transfer rates at the wall were increased with incremental increases in the temperature ratio and first order chemical reaction parameters, whereas contrary effects were observed for larger thermophoresis, fluid relaxation and Brownian motion parameters. The simulations can be applied to the stagnated nano-polymeric coating of micromachines, robotic components and sensors. Full article

This study aimed to enhance the solubility and release characteristics of docetaxel by synthesizing highly porous and stimuli responsive nanosponges, a nano-version of hydrogels with the additional qualities of both hydrogels and nano-systems. Nanosponges were prepared by the free radical polymerization technique and characterized by their solubilization efficiency, swelling studies, sol-gel studies, percentage entrapment efficiency, drug loading, FTIR, PXRD, TGA, DSC, SEM, zeta sizer and in vitro dissolution studies. In vivo toxicity study was conducted to assess the safety of the oral administration of prepared nanosponges. FTIR, TGA and DSC studies confirmed the successful grafting of components into the stable nano-polymeric network. A porous and sponge-like structure was visualized through SEM images. The particle size of the optimized formulation was observed in the range of 195 ± 3 nm. The fabricated nanosponges noticeably enhanced the drug loading and solubilization efficiency of docetaxel in aqueous media. The drug release of fabricated nanosponges was significantly higher at pH 6.8 as compared to pH 1.2 and 4.5. An acute oral toxicity study endorsed the safety of the system. Due to an efficient preparation technique, as well as its enhanced solubility, excellent physicochemical properties, improved dissolution and non-toxic nature, nanosponges could be an efficient and a promising approach for the oral delivery of poorly soluble drugs. Full article

Early detection of cancer disease is vital to the successful treatment, follow-up and survival of patients, therefore sensitive and specific methods are still required. Mucin 1 (MUC1) is a clinically approved biomarker for determining the cancer that is a type I transmembrane protein with a dense glycosylated extracellular domain extending from the cell surface to 200–500 nm. In this study, nanopolymers were designed with a lectin affinity-based recognition system for MUC1 detection as a bioactive layer on electrochemical biosensor electrode surfaces. They were synthesized using a mini emulsion polymerization method and derivatized with triethoxy-3-(2-imidazolin-1-yl) propylsilane (IMEO) and functionalized with Concanavalin a Type IV (Con A) lectin. Advanced characterization studies of nanopolymers were performed. The operating conditions of the sensor system have been optimized. Biosensor validation studies were performed. Real sample blood serum was analyzed and this new method compared with a commercially available medical diagnostic kit (Enzyme-Linked ImmunoSorbent Assay-ELISA). The new generation nanopolymeric material has been shown to be an affordable, sensitive, reliable and rapid device with 0.1–100 U/mL linear range and 20 min response time. Full article

Recently, scientific and technological interest in the synthesis of novel peptide-based hydrogel materials have grown dramatically. Applications of such materials mostly concern the biomedical field with examples covering sectors such as drug delivery, tissue engineering, and production of scaffolds for cell growth, thanks to their biocompatibility and biodegradability. In this work we synthesized Fmoc-Phe₃ based hydrogels of different chirality by using a biocatalytic approach. Moreover, we investigated the possibility of employing a crosslinker during the biosynthetic process and we studied and compared some chemico-physical features of both crosslinked and non-crosslinked hydrogels. In particular, we investigated the rheological properties of such materials, as well as their swelling ability, stability in aqueous medium, and their structure by SEM and AFM analysis. Crosslinked and non-crosslinked hydrogels could be formed by this procedure with comparable yields but distinct chemico-physical features. We entrapped dexamethasone within nanopolymeric particles based on PLGA coated or not with chitosan and we embedded these nanoparticles into the hydrogels. Dexamethasone release from such a nanopolymer/hydrogel system was controlled and sustained and dependent on genipin crosslinking degree. The possibility of efficiently coupling a drug delivery system to hydrogel materials seem particularly promising for tissue engineering applications, where the hydrogel could provide cells the necessary support for their growth, while nanoparticles could favor cell growth or differentiation by providing them the necessary bioactive molecules. Full article