Search Results (4)

In this paper, we propose an optimized protocol to synthesize reproducible, accurate, sustainable integrally skinned monophasic hybrid cellulose acetate/silica membranes for ultrafiltration. Eight different membrane compositions were studied, divided into two series, one and two, each composed of four membranes. The amount of silica increased from 0 wt.% up to 30 wt.% (with increments of 10 wt.%) in each series, while the solvent composition was kept constant within each series (formamide/acetone ratio equals 0.57 wt.% in series one and 0.73 wt.% in series two). The morphology of the membranes was analyzed by scanning electron microscopy and the chemical composition by Fourier transform infrared spectroscopy, in attenuated total reflection mode (FTIR-ATR). Mechanical tensile properties were determined using tensile tests, and a retest trial was performed to assess mechanical properties variability over different membrane batches. The hydraulic permeability of the membranes was evaluated by measuring pure water fluxes following membrane compaction. The membranes in series two produced with a higher formamide/acetone solvent ratio led to thicker membranes with higher hydraulic permeability values (47.2–26.39 kg·h⁻¹·m⁻²·bar⁻¹) than for the membranes in series one (40.01–19.4 kg·h⁻¹·m⁻²·bar⁻¹). Results obtained from the FTIR-ATR spectra suggest the presence of micro/nano-silica clusters in the hybrid membranes of series one, also exhibiting higher Young’s modulus values than the hybrid membranes in series two. Full article

Currently available hemodialysis (HD) membranes are unable to safely remove protein-bound uremic toxins (PBUTs), especially those bonded to human serum albumin (HSA). To overcome this issue, the prior administration of high doses of HSA competitive binders, such as ibuprofen (IBF), has been proposed as a complementary clinical protocol to increase HD efficiency. In this work, we designed and prepared novel hybrid membranes conjugated with IBF, thus avoiding its administration to end-stage renal disease (ESRD) patients. Two novel silicon precursors containing IBF were synthesized and, by the combination of a sol-gel reaction and the phase inversion technique, four monophasic hybrid integral asymmetric cellulose acetate/silica/IBF membranes in which silicon precursors are covalently bonded to the cellulose acetate polymer were produced. To prove IBF incorporation, methyl red dye was used as a model, thus allowing simple visual color control of the membrane fabrication and stability. These smart membranes may display a competitive behavior towards HSA, allowing the local displacement of PBUTs in future hemodialyzers. Full article

A novel cellulose acetate-based monophasic hybrid skinned amine-functionalized CA-SiO₂-(CH₂)₃NH₂ membrane was synthesized using an innovative method which combines the phase inversion and sol-gel techniques. Morphological characterization was performed by scanning electron microscopy (SEM), and the chemical composition was analyzed by Fourier transform infrared spectroscopy in attenuated total reflection mode (ATR-FTIR). The characterization of the monophasic hybrid CA-SiO₂-(CH₂)₃NH₂ membrane in terms of permeation properties was carried out in an in-house-built single hemodialysis membrane module (SHDMM) under dynamic conditions. Permeation experiments were performed to determine the hydraulic permeability (Lp), molecular weight cut-off (MWCO) and the rejection coefficients to urea, creatinine, uric acid, and albumin. SEM confirmed the existence of a very thin (<1 µm) top dense layer and a much thicker bottom porous surface, and ATR-FTIR showed the main bands belonging to the CA-based membranes. Permeation studies revealed that the Lp and MWCO of the CA-SiO₂-(CH₂)₃NH₂ membrane were 66.61 kg·h⁻¹·m⁻²·bar⁻¹ and 24.5 kDa, respectively, and that the Lp was 1.8 times higher compared to a pure CA membrane. Furthermore, the CA-SiO₂-(CH₂)₃NH₂ membrane fully permeated urea, creatinine, and uric acid while completely retaining albumin. Long-term filtration studies of albumin solutions indicated that fouling does not occur at the surface of the CA-SiO₂-(CH₂)₃NH₂ membrane. Full article

Two series of novel integral asymmetric monophasic hybrid membranes, cellulose acetate/silica/titania (CA/SiO₂/TiO₂—series 1) and cellulose acetate/titania (CA/TiO₂—series 2), were developed by the coupling of sol-gel technology and a modified version of the phase inversion technique. SEM micrographs confirmed the integral asymmetric structure of all membranes. ATR-FTIR and ICP-OES results showed that, for the membranes in series 1, TiO₂ is covalently bound to SiO_2, which, in turn, is covalently bound to CA, while for the membranes in series 2, TiO₂ is directly and covalently bound to the CA matrix. Permeation experiments revealed that the permeation performance of the membranes in series 1 is unaffected by the introduction of TiO₂. In contrast, the introduction of TiO₂ in the series 2 membranes increased the hydraulic permeability by a factor of at least 2 when compared to the pristine CA membrane and that incremental additions of TiO₂ further increased the Lp. Full article