Search Results (17)

Background: Ciprofloxacin (CIP) is a poorly water-soluble fluoroquinolone-type antibiotic that can be useful in the treatment of lung infections. When the drugs are delivered directly to the lungs, a smaller dosage is needed to achieve the desired effect compared to the oral administration. Moreover, the application of nanoparticles potentially enhances the effectiveness of the treatments while lowering the possible side effects. Therefore, we aimed to develop a “nano-in-micro” structured dry powder inhaler formulation containing CIP. Methods: A two-step preparation method was used. Firstly, a nanosuspension was first prepared using a high-performance planetary mill by wet milling. After the addition of different additives (leucine and mannitol), the solid formulations were created by spray drying. The prepared DPI samples were analyzed by using laser diffraction, nanoparticle tracking analysis, scanning electron microscopy, X-ray powder diffraction, and differential scanning calorimetry. The solubility and in vitro dissolution tests in artificial lung fluid and in vitro aerodynamic investigations (Spraytec^® device, Andersen Cascade Impactor) were carried out. Results: The nanosuspension (D50: 140.0 ± 12.8 nm) was successfully prepared by the particle size reduction method. The DPIs were suitable for inhalation based on the particle diameter and their spherical shape. Improved surface area and amorphization after the preparation processes led to faster drug release. The excipient-containing systems were characterized by large lung deposition (fine particle fraction around 40%) and suitable aerodynamic diameter (between 3 and 4 µm). Conclusions: We have successfully formulated a nanosized antibiotic-containing formulation for pulmonary delivery, which could provide a potential treatment for patients with different respiratory infections. Full article

Porous conductive polymer structures, in particular Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) structures, are gaining in importance due to their versatile fields of application as sensors, hydrogels, or supercapacitors, to name just a few. Moreover, (porous) conducting polymers have become of interest for wearable and smart textile applications due to their biocompatibility, which enables applications with direct skin contact. Therefore, there is a huge need to investigate distinct, straightforward, and textile-compatible production methods for the fabrication of porous PEDOT:PSS structures. Here, we present novel and uncomplicated approaches to producing diverse porous PEDOT:PSS structures and characterize them thoroughly in terms of porosity, electrical resistance, and their overall appearance. Production methods comprise the incorporation of micro cellulose, the usage of a blowing agent, creating a sponge-like structure, and spraying onto a porous base substrate. This results in the fabrication of various porous structures, ranging from thin and slightly porous to thick and highly porous. Depending on the application, these structures can be modified and integrated into electronic components or wearables to serve as porous electrodes, sensors, or other functional devices. Full article

A fractional description for the optically induced mechanisms responsible for conductivity and multiphotonic effects in ZnO nanomaterials is studied here. Photoconductive, electrical, and nonlinear optical phenomena exhibited by pure micro and nanostructured ZnO samples were analyzed. A hydrothermal approach was used to synthetize ZnO micro-sized crystals, while a spray pyrolysis technique was employed to prepare ZnO nanostructures. A contrast in the fractional electrical behavior and photoconductivity was identified for the samples studied. A positive nonlinear refractive index was measured on the nanoscale sample using the z-scan technique, which endows it with a dominant real part for the third-order optical nonlinearity. The absence of nonlinear optical absorption, along with a strong optical Kerr effect in the ZnO nanostructures, shows favorable perspectives for their potential use in the development of all-optical switching devices. Fractional models for predicting electronic and nonlinear interactions in nanosystems could pave the way for the development of optoelectronic circuits and ultrafast functions controlled by ZnO photo technology. Full article

Intranasal administration has attracted attention as a means of delivering drugs because it bypasses the blood–brain barrier. However, conventional intranasal administration of drug solutions to mice using the micropipette method (MP method) is complicated and time-consuming because it requires small doses to be administered under inhalation anesthesia. This study evaluated the effectiveness of a novel intranasal administration method using Micro FPS™, a novel micro-spraying device (the MSD method). The MSD method allowed more reliable administration of the solution to the nasal mucosa than the MP method did. The transfer of inulin, a model water-soluble macromolecule compound, to the olfactory bulb and brain (cerebrum, cerebellum, brainstem, and striatum) was similar with the two methods. It also allowed the drug to be administered in a shorter time. These results suggest that the MSD method is simpler and more rapid than the MP method for intranasal administration of drugs to mice and achieves comparable delivery of inulin to the olfactory bulb and brain. Therefore, the Micro FPS™ device is a potentially useful tool for intranasal drug administration to rodents and could facilitate the development of intranasal formulations, contributing to drug development for central nervous system diseases. Full article

Antireflective and self-cleaning coatings have attracted increasing attention in the last few years due to their promising and wider applications such as stealth, display devices, sensing, and other fields. However, existing antireflective and self-cleaning functional material are facing problems such as difficult performance optimization, poor mechanical stability, and poor environmental adaptability. Limitations in design strategies have severely restricted coatings’ further development and application. Fabrication of high-performance antireflection and self-cleaning coatings with satisfactory mechanical stability remain a key challenge. Inspired by the self-cleaning performance of nano-/micro-composite structure on natural lotus leaves, SiO₂/PDMS/matte polyurethane biomimetic composite coating (BCC) was prepared by nano-polymerization spraying technology. The BCC reduced the average reflectivity of the aluminum alloy substrate surface from 60% to 10%, and the water contact angle (CA) was 156.32 ± 0.58°, illustrating the antireflective and self-cleaning performance of the surface was significantly improved. At the same time, the coating was able to withstand 44 abrasion tests, 230 tape stripping tests, and 210 scraping tests. After the test, the coating still showed satisfactory antireflective and self-cleaning properties, indicating its remarkable mechanical stability. In addition, the coating also displayed excellent acid resistance, which has important value in aerospace, optoelectronics, industrial anti-corrosion, etc. Full article

This paper reports the development of ZnO NRs/rGO-based photocatalysts integrated into a tree-branched polymer-based microfluidic reactor for efficient photodegradation of water contaminants. The reactor system includes a photocatalytic reactor, tree-branched microfluidic channels, and ZnO nanorods (NRs) coated with reduced graphene oxide (rGO) on a glass substrate within an area of 0.6 × 0.6 cm². The ZnO NRs/rGO acts as a photocatalyst layer grown hydrothermally and then spray-coated with rGO. The microfluidic system is made of PDMS and fabricated using soft lithography (micro molding using SU-8 master mold patterned on a silicon wafer). The device geometry is designed using AutoCAD software and the flow properties of the microfluidics are simulated using COMSOL Multiphysics. The microfluidic platform’s photocatalytic process aims to bring the nanostructured photocatalyst into very close proximity to the water flow channel, reducing the interaction time and providing effective purification performance. Our functionality test showed that a degradation efficiency of 23.12 %, within the effective residence time of less than 3 s was obtained. Full article

Dispersion of a radiological source is a complex scenario in terms of first response, especially when it occurs in an urban environment. The authors in this paper designed, simulated, and analyzed the data from two different scenarios with the two perspectives of an unintentional fire event and a Radiological Dispersal Device (RDD) intentional explosion. The data of the simulated urban scenario are taken from a real case of orphan sources abandoned in a garage in the center of the city of Milan (Italy) in 2012. The dispersion and dose levels are simulated using Parallel Micro Swift Spray (PMSS) software, which takes into account the topographic and meteorological information of the reference scenarios. Apart from some differences in the response system of the two scenarios analyzed, the information provided by the modeling technique used, compared to other models not able to capture the actual urban and meteorological contexts, make it possible to modulate a response system that adheres to the real impact of the scenario. The authors, based on the model results and on the evidence provided by the case study, determine the various countermeasures to adopt to mitigate the impact for the population and to reduce the risk factors for the first responders. Full article

Triboelectric nanogenerators (TENGs) stand out as an attractive form of technology for the efficient harvest of mechanical energy and the powering of wearable devices due to their light weight, simplicity, high power density, and efficient vibration energy scavenging capabilities. However, the requirement for micro/nanostructures and/or complex and expensive instruments hinders their cheap mass production, thus limiting their practical applications. By using a simple, cost-effective, fast spray-coating process, we develop high-performance UV-curable triboelectric coatings for large-scale energy harvesting. The effect of different formulations and coating compositions on the triboelectric output is investigated to design triboelectric coatings with high output performance. The TENG based on a hybrid coating exhibits high output performance of 54.5 μA current, 1228.9 V voltage, 163.6 nC transferred charge and 3.51 mW output power. Moreover, the hybrid coatings show good long-term output stability. All the results indicate that the designed triboelectric coatings show great potential for large-scale energy harvesting with the advantages of cost-effectiveness, fast fabrication, easy mass production and long-term stability. Full article

Using unmanned aerial vehicle (UAV) hyperspectral images to accurately estimate the chlorophyll content of summer maize is of great significance for crop growth monitoring, fertilizer management, and the development of precision agriculture. Hyperspectral imaging data, analytical spectral devices (ASD) data, and SPAD values of summer maize in different key growth periods were obtained under the conditions of a micro-spray strip drip irrigation water supply. The hyperspectral data were preprocessed by spectral transformation methods. Then, several algorithms including Findpeaks (FD), competitive adaptive reweighted sampling (CARS), successive projections algorithm (SPA), and CARS_SPA were used to extract the sensitive characteristic bands related to SPAD values from the hyperspectral image data obtained by UAV. Subsequently, four machine learning regression models including partial least squares regression (PLSR), random forest (RF), extreme gradient boosting (XGBoost), and deep neural network (DNN) were used to establish SPAD value estimation models. The results showed that the correlation coefficient between the ASD and UAV hyperspectral data was greater than 0.96 indicating that UAV hyperspectral image data could be used to estimate maize growth information. The characteristic bands selected by different algorithms were slightly different. The CARS_SPA algorithm could effectively extract sensitive hyperspectral characteristics. This algorithm not only greatly reduced the number of hyperspectral characteristics but also improved the multiple collinearity problem. The low frequency information of SSR in spectral transformation could significantly improve the spectral estimation ability for SPAD values of summer maize. In the accuracy verification of PLSR, RF, XGBoost, and the DNN inversion model based on SSR and CARS_SPA, the determination coefficients (R²) were 0.81, 0.42, 0.65, and 0.82, respectively. The inversion accuracy based on the DNN model was better than the other models. Compared with high-frequency information, low-frequency information (DNN model based on SSR and CARS_SPA) had a strong estimating ability for SPAD values in summer maize canopy. This study provides a reference and technical support for the rapid non-destructive testing of summer maize. Full article

The use of economic methods to design and fabricate flexible copper sensors decorated with bismuth micro/nanodentrites for the detection of lead and cadmium in sweat is demonstrated. The flexible copper sensors were constructed with simple and cost-effective materials; namely, flexible and adhesive conductive copper tape, adhesive label containing the design of a three-electrode electrochemical system, and nail polish or spray as a protective layer. The flexible copper device consisted of a working electrode decorated with bismuth micro/nanodentrites using an electrodeposition technique, a copper pseudo-reference and copper counter electrodes. Under optimal experimental conditions, the flexible sensing platform showed excellent performance toward the detection of lead and cadmium using differential pulse anodic stripping voltammetry (DPAdSV) in a wide linear range from 2.0 μM to 50 μM with acceptable reproducibility and repeatability, and limits of detection and quantification of 5.36 and 17.9 μM for Cd²⁺ ions and 0.76 μM and 2.5 for Pb²⁺ ions. Studies of addition and recovery in spiked artificial sweat sample were performed, with a recovery of 104.6%. The flexible copper device provides a great opportunity for application in wearable perspiration-based healthcare systems or portable sensors to detect toxic metals in biological samples. Full article

A table-top microdevice was introduced in this work to produce ultrasmall particles for drug delivery via inhalation. The design and operation are similar to that of spray-drying equipment used in industry, but the device itself is much smaller and more portable in size, simpler to operate and more economical. More importantly, the device enables more accurate control over particle size. Using Flavopiridol, an anti-inflammation medication, formulations have been developed to produce inhalable particles for pulmonary delivery. A solution containing the desired components forms droplets by passing through an array of micro-apertures that vibrate via a piezo-electrical driver. High-purity nitrogen gas was introduced and flew through the designed path, which included the funnel collection and cyclone chamber, and finally was pumped away. The gas carried and dried the micronized liquid droplets along the pathway, leading to the precipitation of dry solid microparticles. The formation of the cyclone was essential to assure the sufficient travel path length of the liquid droplets to allow drying. Synthesis parameters were optimized to produce microparticles, whose morphology, size, physio-chemical properties, and release profiles met the criteria for inhalation. Bioactivity assays have revealed a high degree of anti-inflammation. The above-mentioned approach enabled the production of inhalable particles in research laboratories in general, using the simple table-top microdevice. The microparticles enable the inhalable delivery of anti-inflammation medicine to the lungs, thus providing treatment for diseases such as pulmonary fibrosis and COVID-19. Full article

In recent years, the piezoelectric jet and atomization devices have exhibited tremendous advantages including their simple construction, and the fact that they are discreet and portable as well as low cost. They have been widely used in cell printing, spray cooling, drug delivery, and other industry fields. First, in this paper, two different concepts of jet and atomization are defined, respectively. Secondly, based on these two concepts, the piezoelectric jet and atomization devices can be divided into two different categories: piezoelectric micro jet device and piezoelectric atomization device. According to the organizational structure, piezoelectric micro jet devices can be classified into four different models: bend mode, push mode, squeeze mode, and shear mode. In addition, their development history and structural characteristics are summarized, respectively. According to the location of applied energy, there are two kinds of piezoelectric atomization devices, i.e., the static mesh atomization device and the vibration mesh atomization device, and both their advantages and drawbacks are discussed. The research achievements are summarized in three aspects of cell printing, spray cooling, and drug delivery. Finally, the future development trends of piezoelectric jet and atomization devices are prospected and forecasted. Full article

In this paper, we synergistically combine electrohydrodynamic (EHD) printing and replica molding for the fabrication of microlenses. Glycerol solution microdroplets was sprayed onto the ITO glass to form liquid mold by an EHD printing process. The liquid mold is used as a master to fabricate a polydimethylsiloxane (PDMS) mold. Finally, the desired micro-optical device can be fabricated on any substrate using a PDMS soft lithography mold. We demonstrate our strategy by generating microlenses of photocurable polymers and by characterizing their optical properties. It is a new method to rapidly and cost-effectively fabricate molds with small diameters by exploiting the advantages of EHD printing, while maintaining the parallel nature of soft-lithography. Full article

This work reviews design aspects of liquid metal antennas and their corresponding applications. In the age of modern wireless communication technologies, adaptability and versatility have become highly attractive features of any communication device. Compared to traditional conductors like copper, the flow property and lack of elasticity limit of conductive fluids, makes them an ideal alternative for applications demanding mechanically flexible antennas. These fluidic properties also allow innovative antenna fabrication techniques like 3D printing, injecting, or spraying the conductive fluid on rigid/flexible substrates. Such fluids can also be easily manipulated to implement reconfigurability in liquid antennas using methods like micro pumping or electrochemically controlled capillary action as compared to traditional approaches like high-frequency switching. In this work, we discuss attributes of widely used conductive fluids, their novel patterning/fabrication techniques, and their corresponding state-of-the-art applications. Full article

The spray pyrolysis technique has been extensively used to synthesize materials for a wide variety of applications such as micro and sub-micrometer dimension MOSFET´s for integrated circuits technology, light emitting devices for displays, and solid-state lighting, planar waveguides and other multilayer structure devices for photonics. This technique is an atmospheric pressure chemical synthesis of materials, in which a precursor solution of chemical compounds in the proper solvent is sprayed and converted into powders or films through a pyrolysis process. The most common ways to generate the aerosol for the spraying process are by pneumatic and ultrasonic systems. The synthesis parameters are usually optimized for the materials optical, structural, electric and mechanical characteristics required. There are several reviews of the research efforts in which spray pyrolysis and the processes involved have been described in detail. This review is intended to focus on research work developed with this technique in relation to high-K dielectric and luminescent materials in the form of coatings and powders as well as multiple layered structures. Full article