Search Results (13)

Background/Objectives: Partial maxillectomy frequently results in severe impairments of oral functions, such as difficulties in chewing, speech, swallowing, and facial appearance. Immediate prosthetic rehabilitation is challenging because soft tissue healing is typically required before impression taking. This study aimed to (1) develop a comprehensive digital workflow for fabricating immediate obturator prostheses using preoperative data and (2) assess their early clinical effectiveness in restoring oral functions after surgery. Methods: In this prospective clinical study, 20 patients undergoing partial maxillectomy from January 2023 to January 2025 were enrolled. A digital workflow combining cone-beam computed tomography (CBCT), intraoral scanning, CAD/CAM design, and 3D metal printing was implemented. Obturator prostheses were digitally designed preoperatively and inserted immediately post-resection. Functional outcomes were postoperatively evaluated after one month using the Obturator Functioning Scale (OFS), which measures functional, speech, esthetic, and psychosocial aspects. Results: The digitally fabricated immediate obturator prostheses were successfully placed intraoperatively in all patients. Most participants reported mild to moderate difficulties, with speech-related issues being the most common, while esthetic concerns were minimal. Masticatory function was satisfactorily restored in 75% of cases, and 60% of patients experienced minimal fluid leakage during swallowing. No significant differences were found between genders. Patients with larger defects tended to report greater functional challenges. Conclusions: The digitally planned immediate obturator prosthesis provides a practical and effective solution for early rehabilitation following partial maxillectomy. This digital workflow reduces patient discomfort, restores key oral functions, and facilitates psychosocial recovery. Full article

Objectives: The objective of this study was to compare the trueness and precision of three intraoral scanners (IOSs) for the digitization of dentate and edentulous maxillectomy and mandibulectomy defects in artificial models. Methods: Four representative defect models—a dentate and an edentulous maxillectomy model and a dentate and an edentulous mandibulectomy model—were used for digital scanning. After a reference scan of each model, they were scanned with three IOSs: CEREC AC Omnicam, True Definition, and cara TRIOS 3. For comparison, five conventional impressions with a polysiloxane material were taken and digitized with a laboratory scanner. The obtained data were evaluated with three-dimensional (3D) inspection software and superimposed with the reference scan data by using a best-fit algorithm. The mean absolute 3D deviations of the IOS compared to the reference data (trueness) and when comparing the datasets within the IOS (precision) were analyzed. Linear mixed models and multiple pairwise comparisons were used for statistical analyses. Results: The overall comparison of the four evaluated procedures for data acquisition showed a significant difference in trueness (p < 0.0001) and precision (p < 0.0001). The average mean trueness of the IOSs ranged from 32.17 to 204.43 µm, compared to 32.07 to 64.85 µm for conventional impressions. Here, the conventional impression and cara TRIOS 3 performed the most precisely with no significant difference. CEREC AC Omnicam achieved the worst precision. Conclusions: Using a suitable intraoral scanner, defective jaws even without teeth could be captured in satisfying accuracy. This shows the possibility to use an intraoral scanner for maxillofacial defect patients and gives a vision of using digital technology in maxillofacial prosthetics. Full article

Oral rehabilitation after maxillary oncological resection is challenging. This case report presents the rehabilitation of a 65-year-old Caucasian male adenoid cystic carcinoma patient using a myo-cutaneous thigh flap, zygomatic implant placement, and an immediate fixed provisional prosthesis made with computer-aided technologies. The patient presented complaints of asymptomatic enlarged swelling of 5-mm on the right hard hemi-palate. There was an oro-antral communication deriving from a previous local excision. Preoperative radiographs showed the involvement of the right maxilla, maxillary sinus, and nose with a suspect involvement of the maxillary division of the trigeminal nerve. Treatment was planned through a fully digital workflow. A partial maxillectomy was performed endoscopically, and maxilla was reconstructed using an anterolateral thigh free flap. Two zygomatic implants were inserted simultaneously. A provisional fix full-arch prosthesis was manufactured preoperatively through a fully digital workflow and was placed in the operating room. Following post-operative radiotherapy, the patient received a final hybrid prosthesis. During the follow-up period of two years, the patient reported good function, aesthetics, and significant enhancement in quality of life. According to the results of this case, the protocol represented can be a promising alternative for oral cancer patients with large defects, and can lead to an improved quality of life. Full article

Background: Recording accurate impressions from maxillary defects is a critical and challenging stage in the prosthetic rehabilitation of patients following maxillectomy surgery. The aim of this study was to develop and optimize conventional and 3D-printed laboratory models of maxillary defects and to compare conventional and digital impression techniques using these models. Methods: Six different types of maxillary defect models were fabricated. A central palatal defect model was used to compare conventional silicon impressions with digital intra-oral scanning in terms of dimensional accuracy and total time taken to record the defect and produce a laboratory analogue. Results: Digital workflow produced different results than the conventional technique in terms of defect size measurements which were statistically significant (p < 0.05). The time taken to record the arch and the defect using an intra-oral scanner was significantly less compared with the traditional impression method. However, there was no statistically significant difference between the two techniques in terms of the total time taken to fabricate a maxillary central defect model (p > 0.05). Conclusions: The laboratory models of different maxillary defects developed in this study have the potential to be used to compare conventional and digital workflow in prosthetic treatment procedures. Full article

As society ages, it is important to understand the prevalence of dementia and the difficulties of inserting prostheses in patients with maxillofacial defects in order to clarify issues in supportive care. We screened 183 patients for dementia using the revised Hasegawa’s dementia scale (HDS-R) at the Clinic for Maxillofacial prosthetics, Tokyo Medical and Dental University, and investigated age and sex differences in HDS-R score. We asked 47 of the 183 participants about the difficulty of inserting a maxillofacial obturator prosthesis and collected subjective comments, information about the prosthesis, and data from five assessments. Multiple regression analysis was used to reveal factors associated with insertion difficulty. Overall, 8.7% of the participants were judged to have possible dementia. Men were more likely than women to have possible dementia, and the risk increased with age. Of the 47 participants, 26 reported difficulty inserting their prosthesis, 12 of whom attributed it to their oral defect. Fourteen patients advised following doctor’s instructions to practice insertion in order to become accustomed to it. A lower HDS-R score had a significant impact on insertion difficulty. Cognitive function and difficulty inserting maxillary obturator prostheses should be considered in the provision of continuous supportive care to patients with maxillary defects. Full article

Maxillectomies cause malocclusion, masticatory disorders, swallowing disorders and poor nasolabial projection, with consequent esthetic and functional sequelae. Reconstruction can be achieved with conventional approaches, such as closure of the maxillary defect by microvascular free flap surgery or prosthetic obturation. Four patients with segmental maxillary defects that had been reconstructed with customized subperiosteal titanium maxillary implants (CSTMI) through virtual surgical planning (VSP), STL models and CAD/CAM titanium mesh were included. The smallest maxillary defect was 4.1 cm and the largest defect was 9.6 cm, with an average of 7.1 cm. The reconstructed maxillary vertical dimension ranged from 9.3 mm to 17.4 mm, with a mean of 13.17 mm. The transverse dimension of the maxilla at the crestal level was attempted to be reconstructed based on the pre-excision CT scan, and these measurements ranged from 6.5 mm in the premaxilla area to 14.6 mm at the posterior level. All patients were rehabilitated with a fixed prosthesis on subperiosteal implants with good esthetic and functional results. In conclusion, we believe that customized subperiosteal titanium maxillary implants (CSTMI) are a safe alternative for maxillary defects reconstruction, allowing for simultaneous dental rehabilitation while restoring midface projection. Nonetheless, prospective and randomized trials are required with long-term follow-up, to assess its long-term performance and safety. Full article

(1) Background: Nowadays, microvascular grafts are the gold standard in the reconstruction of midface defects after maxillectomy, however, not all patients may qualify for this type of surgery. The purpose of present study is to evaluate the benefits of alternative reconstruction methods such as full-thickness skin grafts for these conditions. (2) Methods: The research group consisted of 37 patients who underwent maxillectomy due to cancer of the mid-face and had full-thickness skin graft reconstruction. The study covered the period from 2011 to 2020. (3) Results: Based on the clinical examination and the subjective assessment of patients, a positive effect of the use of free skin grafts on their convalescence and rehabilitation was found. In particular, they contributed to the reduction in postoperative pain and pain associated with prosthetic stages (VAS Scale). (4) Conclusion: Full-thickness skin grafts in combination with individual prosthetic restorations are a good alternative to rehabilitation in patients who do not qualify for microsurgical treatment. Full article

Zygomatic implants are used in patients with maxillary defects to improve the retention and stability of obturator prostheses, thereby securing good oral function. Prosthetic-driven placement of zygomatic implants is even difficult for experienced surgeons, and with a free-hand approach, deviation from the preplanned implant positions is inevitable, thereby impeding immediate implant-retained obturation. A novel, digitalized workflow of surgical planning was used in 10 patients. Maxillectomy was performed with 3D-printed cutting, and drill guides were used for subsequent placement of zygomatic implants with immediate placement of implant-retained obturator prosthesis. The outcome parameters were the accuracy of implant positioning and the prosthetic fit of the obturator prosthesis in this one-stage procedure. Zygomatic implants (n = 28) were placed with good accuracy (mean deviation 1.73 ± 0.57 mm and 2.97 ± 1.38° 3D angle deviation), and in all cases, the obturator prosthesis fitted as pre-operatively planned. The 3D accuracy of the abutment positions was 1.58 ± 1.66 mm. The accuracy of the abutment position in the occlusal plane was 2.21 ± 1.33 mm, with a height accuracy of 1.32 ± 1.57 mm. This feasibility study shows that the application of these novel designed 3D-printed surgical guides results in predictable zygomatic implant placement and provides the possibility of immediate prosthetic rehabilitation in head and neck oncology patients after maxillectomy. Full article

Bone replacement implants for craniofacial reconstruction require to provide an adequate structural foundation to withstand the physiological loading. With recent advances in 3D printing technology in place of bone grafts using autologous tissues, patient-specific additively manufactured implants are being established as suitable alternates. Since the stress distribution of these structures is complicated, efficient design techniques, such as topology optimization, can deliver optimized designs with enhanced functionality. In this work, a two-scale topology optimization approach is proposed that provides multi-material designs for both macrostructures and microstructures. In the first stage, a multi-resolution topology optimization approach is used to produce multi-material designs with maximum stiffness. Then, a microstructure with a desired property supplants the solid domain. This is beneficial for bone implant design since, in addition to imparting the desired functional property to the design, it also introduces porosity. To show the efficacy of the technique, four different large craniofacial defects due to maxillectomy are considered, and their respective implant designs with multi-materials are shown. These designs show good potential in developing patient-specific optimized designs suitable for additive manufacturing. Full article

Objective: Maxillectomy often results in a high level of morbidity with significant psychological and functional implications for patients. The aims of the present study were to assess the effectiveness of the maxillary obturator as a speech rehabilitation aid, to examine the influence of dentition on speech intelligibility, to restore patients’ regular daily activity as soon as possible, and to maintain patients’ psychological well-being throughout the treatment. Patients and Methods: Forty-one palatomaxillary immediate obturator and definitive reconstruction patient treatments were reviewed at a clinic (Ankara, Turkey). Patients aged between 20 and 73 years with surgically acquired partial maxillary defects were included in this study. All patients were rehabilitated with immediate and definitive obturators. The patients were given immediate surgical obturators which were adjusted to the defect area with a tissue conditioner. By employing this procedure and relining with the tissue conditioner weekly, immediate obturators were used in the interim stage of the treatment. As interim obturators, prostheses were used for two to three months until healing and resorption were found satisfactory, after which the definitive obturators were fabricated. Results: The speech intelligibility test (SIT) was employed for the evaluation of the speech ability. Significant improvements were found in the mean speech intelligibility test score (SITS), from 0.02% in patients without prosthetic obturation to 94.10% in patients with immediate obturation on the second day, 95.60% in patients with immediate obturation on the 20th day, and 95.97% in patients with definitive obturation. Full article

Combined upper alveolectomy and segmental mandibulectomy are complex defects. Reconstruction of these defects is usually suboptimal. We describe the case of a pediatric patient with vessel-depleted neck with recurrent vascular malformation involving the ramus and coronoid process of mandible and a previous history of maxillectomy and a reconstruction with anterolateral thigh flap. The patient underwent wide resection. The defects involving the upper alveolus and mandible were simultaneously reconstructed with a single free fibula flap. Full article

Tumors arising from the posterior hard palate or posterolateral maxilla may extend to involve the infratemporal fossa (ITF). Resection of these tumors results in infrastructural maxillectomy with ITF defects. In this study, we describe the use of an adipofascial anterolateral thigh flap (ALT) specifically for such defects. This case series includes four patients who underwent an infrastructure maxillectomy with ITF clearance and the resultant defects were reconstructed using adipofascial anterolateral thigh flaps. The complications as well as the functional outcomes were assessed. This study included patients with lesions involving the hard palate, posterolateral part of maxilla with extension into the ITF. The mean flap dimension was 150 cm² (range, 120–180 cm²). All flaps were harvested based on a single perforator. The flap was used to obliterate the ITF defect and also to achieve oroantral separation. All flaps mucosalized well within 6 weeks. All patients were on oral diet and had adequate mouth opening. There were no donor-site complications. Adipofascial ALT is an excellent choice for infrastructural maxillectomy defects with ITF extension. The intraoral part got mucosalized well and provided a smooth and taut surface. A large adipofascial tissue flap helps obliterate the ITF, thus minimizing complications. Full article

The use of a three-dimensional (3-D) model has been well described for craniomaxillofacial reconstruction, especially with the preoperative planning of free fibula flaps. This article reports the application of an innovative 3-D model approach for the calculation of the exact contours, angles, length, and general morphology of a prefabricated MEDPOR 2/3 orbital implant for reconstruction of a suprastructure maxillectomy defect. The 3-D model allowed intraoperative modification of the MEDPOR implant which decreased the risk of iatrogenic harm, contamination while also improving aesthetic results and function. With the aid of preoperative 3-D models, porous polypropylene facial implants can be contoured efficiently intraoperatively to precisely reconstruct complex craniomaxillofacial defects. Full article