Search Results (6)

We designed detachable steel sleeves to reinforce wooden joints and improve their integrity under earthquake action and investigated their mechanical properties. Monotonic bending tests were performed on a half-tenon pure wooden joint and a joint strengthened by a detachable steel sleeve. More obvious tenon pulling-out failure was observed in the pure wood joint; in comparison, only slight extrusion fracture of wooden beams and extrusion deformation of steel sleeves occurred in the wood joint reinforced by a detachable steel sleeve. Our test results showed that the initial rotational stiffness of the strengthened joint, JG1, was increased by 495.4% compared with that of the unstrengthened joint, JG0. The yield bending moment increased by 425.9%, and the ultimate bending moment increased by 627.5%, which indicated that the mechanical performance was significantly improved when the joint was reinforced by a detachable steel sleeve. Numerical simulations of different components were performed with finite element analysis software to analyze the mechanical performance of the reinforced joint. It was found that the stiffness and ultimate flexural performance of the joint could be increased by setting stiffeners on the steel sleeve and connecting the wooden column with self-tapping screws. The results of the tests were compared with those obtained through finite element analysis, and a high degree of accuracy was achieved, which could provide a theoretical basis for the reinforcement of timber structural buildings. Full article

The conducted archival and field research focused on the analysis of details in timber-frame construction in Western Pomerania within the borders of the Republic of Poland. The researcher examined the influence of high architecture on the vernacular architecture of towns and villages in Western Pomerania throughout historical development, specifically on distinct, characteristic building types. In this study, I took into account the impact of local traditions as well as those brought by settlers. The groups of timber-frame structures that were investigated included residential buildings in small towns, rural cottages and farmsteads. The analyzed structures were erected from the second half of the 17th century to the early 20th century. This broad timeframe is explained by the limited number of structures with preserved wooden ornaments in the studied area. Particular attention was given to the relationship between detail and the form of the structure, as well as its impact on the perception of the whole. Full article

In line with technological advancements, the construction industry worldwide has sought more efficient building systems in relation to aspects such as increased productivity, reduced material waste and meeting the growing demand. The objective of this research was to use structural joints composed of composite dowels in laminated wood beams as an alternative to connect pieces of wood. Composite materials are composed of a matrix phase and a reinforcement phase and, in civil engineering, are generally applied as reinforcements in concrete structures. This article presents the structural performance of laminated pine timber with composite dowels made of fiber-reinforced polymeric resin (epoxy resin, hardener and glass fiber) (glass-fiber-reinforced polymer, GFRP) with a diameter of 12.5 mm, which was subjected to tensile force in the direction of the connection. For this, an experimental program was carried out that included characterization of the GFRP dowel, characterization of the woods used to make the connection and a tensile test of the connections with the dowels reinforced with fiberglass through a prototype designed specifically for the test. Subsequently, the results were compared with those observed in the literature. In the comparisons, it was possible to conclude that the joints with FRP pins exhibited better performance in terms of shear strength per section than those such as common nails, helical nails (Ardox) and composite structural pins (half-lap, 90°), which were 3.8 mm, 3.4 mm and 6 mm in diameter, respectively. This indicates that this composite material has potential for application in these types of connections. As an original contribution, it proves the feasibility of using this material in dowel joints for wooden structures. Full article

Sustainability issues are driving the civil construction industry to adopt and study more environmentally friendly technologies as an alternative to traditional masonry/concrete construction. In this context, plantation wood especially stands out as a constituent of the cross-laminated timber (CLT) system, laminated wood glued in perpendicular layers forming a solid-wood structural panel. CLT panels are commonly connected by screws or nails, and several authors have investigated the behavior of these connections. Glass-fiber-reinforced polymer (GFRP) dowels have been used to connect wooden structures, and have presented excellent performance results; however, they have not yet been tested in CLT. Therefore, the objective of this study is to analyze the glass-fiber-reinforced polymer (GFRP)-doweled connections between CLT panels. The specimens were submitted to monotonic shear loading, following the test protocol described in EN 26891-1991. Two configurations of adjacent five-layer panels were tested: flat-butt connections with 45° dowels (x, y, and z axes), and half-lap connections with 90° dowels. The results were evaluated according to the mechanical connection properties of strength, stiffness, and ductility ratio. The results showed higher stiffness for butt-end connections. In terms of strength, the half-lap connections were stronger than the butt-end connections. Full article

Construction is a powerful industry that is not indifferent to the environment. Neither the maintenance of buildings in a proper technical condition nor their eventual demolition is indifferent to the environment. The main threats to the environment are still the inefficient use of construction materials and energy needed for their production and installation, as well as the emission of harmful substances to the environment at the stage of operation of buildings and their demolition. This article discusses the importance of wood as a renewable material in terms of its physical and mechanical properties. The restoration of forest areas is of great importance to the global ecosystem and the sustainable development system, reducing the threat of global warming and the greenhouse effect by reducing CO₂ levels. In addition, demolition wood can be reused in construction, can be safely recycled as it quickly decomposes, or can be used as a source of renewable energy. The preservation of existing timber-framed buildings in good condition contributes to a lower consumption of this raw material for repair, which already significantly reduces the energy required for their manufacture, transport, and assembly. This also reduces the amount of waste that would have to be disposed of in various ways. Both at the stage of design, execution, and then exploitation, one forgets about the physical processes taking place inside the partitions and about the external climatic influences of the environment (precipitation, water vapor, and temperature) on which the type, intensity, and extent of chemical and biological corrosion depend to a very high degree. This paper presents examples of the influence of such impacts on the operational safety of three selected objects: a feed storehouse and an officer casino building from the second half of the nineteenth century and an 18th century rural homestead building. The research carried out on wooden structures of the above-mentioned objects “in situ” was verified by means of simulation models, which presented their initial and current technical conditions in relation to the type and amount of impact they should safely absorb. Moreover, within the framework of this paper, artificial intelligence methods have been implemented to predict the biological corrosion of the structures studied. The aim of the paper was to draw attention to the timber already built into buildings, which may constitute waste even after several years of operation, requiring disposal and at the same time the production of a substitute. The purpose of the research carried out by the authors of the article was to examine the older and newer buildings in use, the structures of which, in whole or in part, were made of wood. On a global scale, there will be considerable demand for the energy required to thermally dispose of this waste or to deposit it in landfills with very limited capacity until its complete biological decomposition. These energy demands and greenhouse gas emissions can be prevented by effective diagnostics of such structures and the predictability of their behaviour over time, with respect to the conditions under which they are operated. The authors of the article, during each assessment of the technical condition of a building containing wooden elements, analysed the condition of their protection each time and predicted the period of their safe life without the need for additional reinforcements or replacement by others. As the later reality shows, it is a very effective method of saving money and energy. Full article

TYPHABOARD is a sustainable construction and thermal insulation board made of cattail (lat. typha) and magnesite as a binder. It is characterized by a unique combination of high mechanical strength, highly insulating properties, relatively high diffusion openness, inflammability, and a sustainable lifecycle. The TYPHABOARD concept includes ecological benefits related to the systematic planting of the raw material typha in Bulgaria, the production of TYPHABOARD, and its application as a stabilizing, insulating and passive indoor climate controlling element in the framework structure of the historic typology of the Black Sea House. The entire technological and organizational process provides a sustainable solution for the operation of peat areas by planting typha (which acts as a natural water and ground filter), for the engagement of work forces in structurally underdeveloped regions, for sustainable ecological and social regional development, as well as for the sustainable retrofit of existing historic Black Sea Houses. The building and ecological system TYPHABOARD can be successfully introduced and applied in Bulgaria. In addition to the scientific and the practical study, the political eligibility of this was proved and officially permitted by the relevant public bodies in Bulgaria. Full article