Search Results (24)

This comprehensive review paper delves into the utilization of Glass Fiber-Reinforced Polymer (GFRP) composites within the realm of concrete column reinforcement, spotlighting the surge in structural engineering applications that leverage GFRP instead of traditional steel to circumvent the latter’s corrosion issues. Despite a significant corpus of research on GFRP-reinforced structural members, questions about their compression behavior persist, making it a focal area of this review. This study evaluates the properties of GFRP bars and their impact on the structural behavior of concrete columns, addressing variables such as concrete type and strength, cross-sectional geometry, slenderness ratio, and reinforcement specifics under varied loading protocols. With a dataset spanning over 250 publications from 1988 to 2024, our findings reveal a marked increase in research interest, particularly in regions like China, Canada, and the United States, highlighting GFRP’s potential as a cost-effective and durable alternative to steel. However, gaps in current knowledge, especially concerning Ultra-High-Performance Concrete (UHPC) reinforced with GFRP, underscore the necessity for targeted research. Additionally, the contribution of GFRP rebars to compressive column capacity ranges from 5% to 40%, but current design codes and standards underestimate this, necessitating new models and design provisions that accurately reflect GFRP’s compressive behavior. Moreover, this review identifies other critical areas for future exploration, including the influence of cross-sectional geometry on structural behavior, the application of GFRP in seismic resistance, and the evaluation of the size effect on column strength. Furthermore, the paper calls for advanced studies on the long-term durability of GFRP-reinforced structures under various environmental conditions, environmental and economic impacts of GFRP usage, and the potential of Artificial Intelligence (AI) and Machine Learning (ML) in predicting the performance of GFRP-reinforced columns. Addressing these research gaps is crucial for developing more resilient and sustainable concrete structures, particularly in seismic zones and harsh environmental conditions, and fostering advancements in structural engineering through the adoption of innovative, efficient construction practices. Full article

Preventing corrosion in the steel reinforcement of concrete structures is crucial for maintaining structural integrity and load-bearing capacity as it directly impacts the safety and lifespan of concrete structures. By preventing rebar corrosion, the durability and seismic performance of the structures can be significantly enhanced. This study investigates the hysteresis behavior of both corroded and non-corroded engineered cementitious composite (ECC)-glass-fiber-reinforced polymer (GFRP) spiral-confined reinforced-concrete (RC) columns. Employing experimental methods and finite element analysis, this research explores key seismic parameters such as crack patterns, failure modes, hysteretic responses, load-bearing capacities, ductility, stiffness degradation, and energy dissipation. The results demonstrate that ECC-GFRP spiral-confined RC columns, compared to traditional RC columns, show reduced corrosion rates, smaller crack widths, and fewer corrosion products, indicating superior crack control and corrosion resistance. Hysteresis tests revealed that ECC-GFRP columns, at a 20% target corrosion rate, exhibit an enhanced load-bearing capacity, ductility, and energy dissipation, suggesting improved durability and seismic resilience. Parametric and sensitivity analyses confirm the finite element model’s accuracy and highlight the significant influence of concrete compressive strength on load-bearing capacity. The findings suggest that ECC-GFRP spiral-confined RC columns offer promising applications in coastal and seismic-prone regions, enhancing corrosion resistance and mechanical properties, thus potentially reducing formwork costs and improving construction quality and efficiency. Full article

To investigate the impact of the filament winding angle of glass-fiber reinforced plastic (GFRP) on the seismic behavior of GFRP tube ultra-high performance concrete (UHPC) composite columns, this study designs two types of GFRP tube UHPC composite columns. Quasi-static tests are conducted on the specimens subjected to horizontal reciprocating load and axial force, and the skeleton curve characteristics of the structure are analyzed. Furthermore, a finite element analysis model of the composite column is established to explore the effects of the diameter-thickness ratio, circumferential elastic modulus of confined tubes, and tensile strength of concrete on the seismic performance of the composite column. The analysis includes a review of the skeleton curve, energy dissipation capacity, and stiffness degradation of the structure under different designs. The results indicate that the use of GFRP tubes effectively enhances the seismic performance of UHPC columns. The failure mode, peak load, and peak displacement of the composite columns are improved. The finite element analysis results are in good agreement with the experimental results, validating the effectiveness of the analysis model. Extended analysis reveals that the bearing capacity of the specimen increases while the energy dissipation capacity decreases with a decrease in the diameter-thickness ratio and an increase in the circumferential elastic modulus. Although the tensile strength of concrete has some influence on the seismic performance of the specimen, its effect is relatively small. Through regression analysis, a formula for shear capacity suitable for GFRP tube UHPC composite columns is proposed. This formula provides a theoretical reference for the design and engineering practice of GFRP tube UHPC composite columns. Full article

Glass-reinforced composite columns (GRCCs) may provide an economical alternative to conventional construction materials due to the superior cost to strength provided by bulk glass. Prior to this study, no GRCCs had been physically tested, having previously relied on simulation to predict the behavior of the columns. This study utilizes polyurethane resin bonds in place of sizing agents for adherence between materials, a key requirement for the development of the structural system of the columns. The unreinforced control column failed at a load of 11.2 kN while the maximum GRCC load was 30.8 kN. This indicates that glass can be loaded to 123 MPa before the onset of delamination failure of the GRCCs. Maximum shear stress of 53 MPa was reached, exceeding the 11 MPa required for practical GRCCs. Buckling of the columns occurred at 30.8 kN, below the theoretical maximum of 64.4 kN. Through gradual delamination, the column slowly transferred to an unbonded condition, causing buckling failure. Delamination is unlikely to occur in practical GRCCs due to the lower required shear strengths. Full article

Given that a significant fraction of buildings and architectural heritage in Europe’s historical centers are masonry structures, the selection of proper diagnosis, technological surveys, non-destructive testing, and interpretations of crack and decay patterns is paramount for a risk assessment of possible damage. Identifying the possible crack patterns, discontinuities, and associated brittle failure mechanisms within unreinforced masonry under seismic and gravity actions allows for reliable retrofitting interventions. Traditional and modern materials and strengthening techniques create a wide range of compatible, removable, and sustainable conservation strategies. Steel/timber tie-rods are mainly used to support the horizontal thrust of arches, vaults, and roofs and are particularly suitable for better connecting structural elements, e.g., masonry walls and floors. Composite reinforcing systems using carbon, glass fibers, and thin mortar layers can improve tensile resistance, ultimate strength, and displacement capacity to avoid brittle shear failures. This study overviews masonry structural diagnostics and compares traditional and advanced strengthening techniques of masonry walls, arches, vaults, and columns. Several research results in automatic surface crack detection for unreinforced masonry (URM) walls are presented considering crack detection based on machine learning and deep learning algorithms. In addition, the kinematic and static principles of Limit Analysis within the rigid no-tension model framework are presented. The manuscript sets a practical perspective, providing an inclusive list of papers describing the essential latest research in this field; thus, this paper is useful for researchers and practitioners in masonry structures. Full article

The exceptional structural strength and low cost of steel-concrete composite columns make them a popular choice for civil engineering structures. Numerous forms of composite columns, including steel tubes filled with concrete, have been produced recently in response to various construction situations. Cold-formed steel tubular columns with concrete filling have higher strength and ductility due to their capacity to withstand inner buckling and postpone outward buckling. The objective of this research is to determine the ductile and strength performance of composite columns containing various forms of fibre-reinforced concrete when subjected to axial compression. Several different kinds of fibre-reinforced concrete (FRC) are employed as additives in hollow steel columns, including steel FRC, carbon FRC, glass FRC, coir FRC, jute FRC, and sisal FRC. Axial compression tests were performed on 24 columns, including three hollow steel columns and 21 composite columns. Three distinct slenderness ratios were developed and used. Axial bearing capacity, compressive stress-strain curves, ductility, peak strain, axial shortening, and toughness were among the topics covered by the axial compression test. Experimental findings demonstrated that all conventional composite columns experienced failure through overall buckling, Local buckling and crushing of concrete infill, which was transformed into more ductile failure using fibre-reinforced concrete infills. The test results revealed that fibre-reinforced concrete-infilled steel columns outperformed conventional composite columns in terms of strength, ductility, and energy absorption capacity. The percentage increase in load-carrying capacity was observed as 203.88%, 193.48% and 190.03% when compared to hollow cold-formed steel tubular columns in medium, short and stub columns, respectively. Under assessment of stub, short, and medium columns, the load-strain plots demonstrated that the steel fibre-reinforced concrete in-filled columns performed well in terms of ductility. Localized buckling and crushing of the concrete infill caused the composite columns with low slenderness ratios to fail. In contrast, concrete-filled steel tube columns with higher slenderness ratios showed column failure through the overall buckling of the composite column. Full article

This article reports the finite element (FE) investigation of the axial capacities of pultruded fiber-reinforced polymer (PFRP) composite channel columns. The nonlinear finite element model (FEM) was developed by using the ABAQUS package for glass fiber-reinforced polymer (GFRP) composite channel columns, which included geometric and initial geometric imperfections. The developed FEMs were verified against an experimental result available in the literature for GFRP channel columns. The validated FEMs were used to carry out the parametric study comprising 61 FE models to investigate the effect of different geometries, plate slenderness and the length of members on the axial capacities of GFRP pultruded channel columns. The results obtained from the parametric study were used to examine the accuracy of the current Italian guidelines, American pre-standard and the Direct Strength Method (DSM) proposed in the literature for GFRP channel profiles. Based on the obtained results, the suitability of the current design guidelines is assessed and, also, a new set of design equations is proposed to estimate the axial capacity of the pultruded GFRP channel columns. The new proposed set of reliable design equations witnessed a less scattered and a high degree of accuracy in determining the axial load capacity of the pultruded GFRP composite channel columns. Full article

Glass-fiber-reinforced polymer (GFRP) is an advanced material that has superior corrosion resistance, a high strength-to-weight ratio, low thermal conductivity, high stiffness, high fatigue strength, and the ability to resist chemical and microbiological compounds. Despite their many advantages compared with traditional materials, GFRP sections exhibit brittle behavior when subjected to severe loading conditions such as earthquakes, which could be overcome by infilling the GFRP sections with concrete. This paper presents the results of an experimental investigation carried out on the cyclic response of a GFRP beam-column infilled with high-volume fly ash engineered cementitious composites (HVFA-ECC) consisting of 60%, 70%, and 80% fly ash as a replacement for cement. Finite element analysis was also conducted using robot structural analysis software, and the results were compared with the experimental results. The mechanical properties of GFRP sections presented are the compressive strength of ECC, the direct tensile strength of ECC determined using a dog-bone-shaped ECC specimen, the hysteresis behavior of the beam-column, and the energy dissipation characteristics. The lateral load-carrying capacity of beam-column GFRP infilled with HVFA-ECC consisting of 60%, 70%, and 80% fly ash was found to be, respectively, 43%, 31%, and 20% higher than the capacity of GFRP beam-columns without any infill. Hence the GFRP sections infilled with HVFA-ECC could be used as lightweight structural components in buildings to be constructed in earthquake-prone areas. Also in the structural components, as 70% of cement could be replaced with fly ash, it can potentially lead to sustainable construction. Full article

In this study, we aimed to explore the effect of concrete short columns confined by flax/glass fiber hybrid-reinforced epoxy resin (FFRP/GFRP) composites. Taking the same fiber hybrid ratio and different paving orders as parameters, analysis of the axial compressive mechanical properties of eight groups of FFRP/GFRP composite-confined concrete short columns, including one group of flax fiber-reinforced epoxy resin (FFRP) composite-confined concrete short columns and one group of unconstrained concrete short column, was conducted. The effects of different layering sequences on failure modes, load–displacement curves, energy dissipation ductility and the stress–strain relationship of hybrid composite-confined concrete short columns were analyzed. The results show that the axial compression failure modes of FFRP/GFRP composite-confined concrete short columns with the same hybrid ratio and different paving sequences were basically the same, and the CC-H6 group was the most prominent. The ultimate bearing capacity and axial deflection were 91.05% and 11.49% higher than those of the control group (CC-FFRP), and the energy dissipation coefficient was also the largest, at 9.79. The failure trend of the stress–strain curve of the confined concrete short column specimens was basically the same, and the stress and axial strain of the members were increased by 247.9~292.5% and 486.7~701.0%, respectively. Full article

Utility poles made of glass fibre-reinforced polymer (GFRP) are becoming increasingly common in European countries. Therefore, it is necessary to accurately examine their structural properties to ensure the integrity and safety of the poles. The purpose of this article is to compare the bending resistance of GFRP composite lighting columns obtained using European standard procedures with full-scale experimental tests. Several composite lighting columns were tested as part of the research study, and coupon tests were performed to assess the material properties required to calculate their bending resistance according to European Standard (EN) 40-3-3. The results obtained differed significantly. Furthermore, it was observed that the current standard rules for obtaining the resistance of GFRP poles based on the limit state method show a higher load capacity of the column in comparison to the capacity obtained from the tests. Full article

The existence of either eccentricity or slenderness has a significant effect on the mechanical properties of a structure or member. These properties can change the working mechanism, failure mode, and bearing capacity of the structure or member. A concrete-filled, glass fibre-reinforced, polymer tube composite column has the same problem. We carried out experiments on the influences of eccentricity and slenderness on the mechanical properties of concrete-filled, glass fibre-reinforced, polymer tube composite columns. The experimentally recorded stress–strain relationships are presented graphically, and the ultimate axial stresses and strains and the FRP tube hoop strains at rupture were tabulated. The results indicate that the influences of slenderness and eccentricity on the composite columns were significant with regard to the axial strain, hoop strain, ultimate bearing capacity, lateral displacement, and failure mode. Based on the existing research literature and the results reported in this paper, the bearing capacity formula of a composite slender column under an eccentric load was established. The theoretical results were in good agreement with the experimental results. Full article

A composite concrete-filled glass fiber reinforced polymer (GFRP) tube square column is a new type of composite column, where GFRP is externally wrapped over several GFRP square tubes to form a multicavity GFRP tube, and then concrete is poured inside. External GFRP wrapping methods can be divided into two types: entirely wrapped and strip-type wrapped methods. The former is superior to the latter in terms of performance under stress. However, difficulties are introduced in the construction process of the former, and substantial materials are required to wrap the entire structure. To examine the axial compressive performance for this new type of composite column and the impact of the wrapping method, we designed and fabricated one type of entirely wrapped composite column and two types of strip-type wrapped composite columns with clear spacings of 85 mm and 40 mm, respectively, and performed static axial compression tests. Through tests and numerical simulations, we obtained the failure mode, load–displacement curve, and load–strain curve of the specimen, and analyzed the impact of the externally wrapped GFRP on the mechanical behavior of the composite column. The results show that the composite column reached the peak load before the fracture of the GFRP tube fiber occurred, and the bearing capacity declined sharply to approximately 75% of the peak load after the fiber fractured, then entered a platform section, thereby displaying ductile failure. As the wrapped layers of GFRP strips increased, the load capacity of the specimen exhibited a linear growth tendency. Compared with the performance of the entirely wrapped method, the load capacity of the specimens in the W5040 group declined 9.8% on average, and the peak efficiency of the GFRP strips increased by 50%, thereby indicating that the use of appropriate GFRP layers and strip distance intervals can ensure the appropriate bearing capacity of composite columns and full utilization of GFRP material properties. Full article

Structural members comprising geopolymer recycled aggregate concrete (RAC) reinforced with glass fiber-reinforced polymer (GFRP) bars have not been investigated appropriately for axial compressive loading cases. The present study addresses this knowledge gap by evaluating the structural efficiency of GFRP-reinforced geopolymer recycled aggregate concrete (GGRAC)-based members subjected to axial compressive loading. A total of nine compressive members (250 mm in cross-section and 1150 mm in height) were constructed to examine the effect of the number of longitudinal GFRP bars and the vertical spacing of transverse GFRP hoops/ties. The experimental results portrayed that the ductility of GGRAC compressive members improved with the reduction in the pitch of GFRP hoops. The axial load-carrying capacity (LCC) of GGRAC compressive members increased by increasing the number of GFRP bars up to eight (corresponding to a reinforcement ratio of 2.11%) while it decreased by using ten longitudinal GFRP bars (corresponding to a reinforcement ratio of 2.65%). Additionally, an empirical model was suggested to predict the axial LCC of GGRAC compressive members based on a large amount of experimental data of similar members. The experimental results and related theoretical predictions substantially prove the applicability and accuracy of the proposed model. The proposed column represents a feasible structural member in terms of material availability and environmental sustainability. Full article

In this paper, the use of a customized automatic reinforcement stitching equipment was demonstrated. The stitching of foam sandwich composite preforms was achieved to obtain structures with improved interfacial properties. The effect of different stitching spacings on the crack propagation process in glass fiber reinforced plastics (GFRP)/foam sandwich composite interfaces was examined by Mode-I Cracked Sandwich Beam (CSB) fracture tests. The load–displacement curve, the crack propagation process, and the release rate of critical strain energy were analyzed. The CSB fracture test results show that the stitching treatment with different stitching spacings increase the peak load and fracture displacement. Furthermore, it was found that the mechanism of crack propagation is changed by the stitching process. The release rates of the critical strain energy in specimens with 0- and 10-mm stitch spacings were evenly distributed, with an average of 0.961 kJ/m² and 1.667 kJ/m², respectively, while the release rates of critical strain energy in specimens with 6-mm and 8-mm stitch spacings were linearly distributed. The CSB fracture tests confirmed that the best suture spacing was 8 mm. Based on these results, the mechanism of crack propagation and the toughening mechanism of the resin column could be revealed. Full article

Bonding of external reinforcement is currently the simplest, fastest, and most popular method of strengthening concrete and masonry structures. Glass and carbon organic fibers are the dominant materials used, but alternatives also include high-strength steel wires. The mechanical properties of such steel are comparable to those of carbon fiber. Due to their good compatibility with mortars, steel wires are particularly well suited to the revitalization of historic buildings. The manuscript provides an overview of research and experience in the use of steel-reinforced polymers (SRPs) and steel-reinforced composite mortars (SRCMs, also called steel-reinforced grout (SRG)) for structural strengthening. The examples described are for concrete beams, slabs and columns, walls, and masonry arches. The results of laboratory tests are discussed. The summary presents the advantages and disadvantages of composites based on ultra-high-strength steels compared with more popular carbon fiber composites. Full article