Search Results (49)

Ammonia, as a toxic and corrosive gas, is widely present in industrial emissions, agricultural activities, and disease biomarkers. Detecting ammonia is of vital importance to environmental safety and human health. Sensors based on MXene have become an effective means for detecting ammonia gas due to their unique hierarchical structure, adjustable surface chemical properties, and excellent electrical conductivity. This study reviews the latest progress in the use of MXene and its composites for the low-temperature detection of ammonia gas. The strategies for designing MXene composites, including heterojunction engineering, surface functionalization, and active sites, are introduced, and their roles in improving sensing performance are clarified. These methods have significantly improved the ability to detect ammonia, offering high selectivity, rapid responses, and ultra-low detection limits within the low-temperature range. Successful applications in fields such as industrial safety, food quality monitoring, medical diagnosis, and agricultural management have demonstrated the multi-functionality of this technology in complex scenarios. The challenges related to the material’s oxidation resistance, humidity interference, and cross-sensitivity are also discussed. This study aims to briefly describe the reasonable design based on MXene sensors, aiming to achieve real-time and energy-saving environmental and health monitoring networks in the future. Full article

Ketones, which are key biomarkers of fat oxidation, are relevant for metabolic health maintenance and disease development, making continuous monitoring essential. In this study, we introduce a novel colorimetric sensor designed for potential continuous acetone detection in biological fluids. The sensor features a polydimethylsiloxane (PDMS) shell that encapsulates a sensitive and specific liquid-core acetone-sensing probe. The microsphere sensors were characterized by evaluating their size, PDMS shell thickness, colorimetric response, and sensitivity under realistic conditions, including 100% relative humidity (RH) and CO₂ interference. The microsphere size and sensor sensitivity can be controlled by modifying the fabrication parameters. Critically, the sensor showed high selectivity for acetone detection, with negligible interference from CO₂ concentrations up to 4%. In addition, the sensor displayed good reproducibility (CV < 5%) and stability under realistic storage conditions (over two weeks at 4 °C). Finally, the accuracy of the microsphere sensor was validated against a gold standard gas chromatography-mass spectrometry (GC-MS) method using simulated and real breath samples from healthy individuals and type 1 diabetes patients. The correlation between the microsphere sensor and GC-MS produced a linear fit with a slope of 0.948 and an adjusted R-squared value of 0.954. Therefore, the liquid-core microsphere-based sensor is a promising platform for acetone body fluid analysis. Full article

Metal–organic frameworks (MOFs) are also known as porous coordination polymers. This kind of material is constructed with inorganic nodes (metal ions or clusters) with organic linkers and has emerged as a promising class of materials with several unique properties. Well-known applications of MOFs include their use as gas storage and in separation, catalysis, carbon dioxide capture, sensing, slender film gadgets, photodynamic therapy, malignancy biomarkers, treatment, and biomedical imaging. Over the past 15 years, an increasing amount of research has been directed to MOFs due to their advanced applications in fuel cells, supercapacitors, catalytic conversions, and drug delivery systems. Various synthesis methods have been proposed to achieve MOFs with nanometric size and increased surface area, controlled surface topology, and chemical activity for industrial use. In this context, the pharmaceutical industry has been watching the accelerated development of these materials with great attention. Thus, the objective of this work is to study the synthesis, characterization, and toxicity of MOFs as potential technological excipients for the development of drug carriers. This work highlights the use of MOFs not only as delivery systems (DDSs) but also in advanced diagnostics and therapies, such as photodynamic therapy and targeted delivery to tumors. Bibliometric analyses showed a growing interest in the topic, emphasizing its contemporary relevance. Full article

Flexible ammonia (NH₃) gas sensors have gained increasing attention for their potential in medical diagnostics and health monitoring, as they serve as a biomarker for kidney disease. Utilizing the pre-designable and porous properties of covalent organic frameworks (COFs) is an innovative way to address the demand for high-performance NH₃ sensing. However, COF particles frequently encounter aggregation, low conductivity, and mechanical rigidity, reducing the effectiveness of portable NH₃ detection. To overcome these challenges, we propose a practical approach using polyvinyl alcohol-carrageenan (κPVA) as a template for in the situ growth of two-dimensional COF film and particles to produce a flexible hydrogel gas sensor (COF/κPVA). The synergistic effect of COF and κPVA enhances the gas sensing, water retention, and mechanical properties. The COF/κPVA hydrogel shows a 54.4% response to 1 ppm NH₃ with a root mean square error of less than 5% and full recovery compared to the low response and no recovery of bare κPVA. Owing to the dual effects of the COF film and the particles anchoring the water molecules, the COF/κPVA hydrogel remained stable after 70 h in atmospheric conditions, in contrast, the bare κPVA hydrogel was completely dehydrated. Our work might pave the way for highly sensitive hydrogel gas sensors, which have intriguing applications in flexible electronic devices for gas sensing. Full article

Certain biomarkers in exhaled breath are indicators of diseases in the human body. The non-invasive detection of such biomarkers in human breath increases the demand for simple and cost-effective gas sensors to replace state-of-the-art gas chromatography (GC) machines. The use of metal oxide (MOX) gas sensors based on thin-film structures solves the current limitations of breath detectors. However, the response at high humidity levels, i.e., in the case of exhaled human breath, significantly decreases the sensitivity of MOX sensors, making it difficult to detect small traces of biomarkers. We have introduced, in previous work, the concept of a hybrid gas sensor, in which thin-film-based MOX gas sensors are combined with an ultra-thin (20–30 nm) polymer top layer deposited by solvent-free initiated chemical vapor deposition (iCVD). The hydrophobic top layer enables sensor measurement in high-humidity conditions as well as the precise tuning of selectivity and sensitivity. In this paper, we present a way to increase the hydrogen (H₂) sensitivity of hybrid sensors through chemical modification of the polymer top layer. A poly(1,3,5,7-tetramethyl-tetravinylcyclotetrasiloxane) (PV4D4) thin film, already applied in one of our previous studies, is transformed into a silsesquioxane-containing top layer by a simple heating step. The transformation results in a significant increase in the gas response for H₂ ~709% at an operating temperature of 350 °C, which we investigate based on the underlying sensing mechanism. These results reveal new pathways in the biomedical application field for the analysis of exhaled breath, where H₂ indicates gastrointestinal diseases. Full article

Nowadays, metal oxide semiconductor gas sensors have diverse applications ranging from human health to smart agriculture with the development of Internet of Things (IoT) technologies. However, high operating temperatures and an unsatisfactory detection capability (high sensitivity, fast response/recovery speed, etc.) hinder their integration into the IoT. Herein, a ternary heterostructure was prepared by decorating WO₃ nanoplates with Au and SnO₂ nanoparticles through a facial photochemical deposition method. This was employed as a sensing material for 3-hydroxy-2-butanone (3H-2B), a biomarker of Listeria monocytogenes. These Au/SnO₂–WO₃ nanoplate-based sensors exhibited an excellent response (R_a/R_g = 662) to 25 ppm 3H-2B, which was 24 times higher than that of pure WO₃ nanoplates at 140 °C. Moreover, the 3H-2B sensor showed an ultrafast response and recovery speed to 25 ppm 3H-2B as well as high selectivity. These excellent sensing performances could be attributed to the rich Au/SnO₂–WO₃ active interfaces and the excellent transport of carriers in nanoplates. Furthermore, a wireless portable gas sensor equipped with the Au/SnO₂–WO₃ nanoplates was assembled, which was tested using 3H-2B with known concentrations to study the possibilities of real-time gas monitoring in food quality and safety. Full article

The combination of two-dimensional material MXene and one-dimensional metal oxide semiconductor can improve the carrier transmission rate, which can effectively improve sensing performance. We prepared a trimethylamine gas sensor based on MoO₃ nanofibers and layered Ti₃C₂T_x MXene. Using electrospinning and chemical etching methods, one-dimensional MoO₃ nanofibers and two-dimensional Ti₃C₂T_x MXene nanosheets were prepared, respectively, and the composites were characterized via XPS, SEM, and TEM. The Ti₃C₂T_x MXene–MoO₃ composite material exhibits excellent room-temperature response characteristics to trimethylamine gas, showing high response (up to four for 2 ppm trimethylamine gas) and rapid response–recovery time (10 s/7 s). Further, we have studied the possible sensitivity mechanism of the sensor. The Ti₃C₂T_x MXene–MoO₃ composite material has a larger specific surface area and more abundant active sites, combined with p–n heterojunction, which effectively improves the sensitivity of the sensor. Because of its low detection limit and high stability, it has the potential to be applied in the detection system of trimethylamine as a biomarker in exhaled air. Full article

Volatile organic compounds (VOCs) have the potential to serve as biomarkers for respiratory diseases such as asthma. Non-invasive respiratory analysis can be used for early detection and disease monitoring. This paper presents the development of a ZnO metal oxide nanofibers sensor as a cost-effective method for detecting NO, which is an asthma biomarker, and NO₂, that can cause asthma. Electrospun metal oxide nanofibers are considered for gas sensor applications due to their unique structural and electrical properties. The results indicate that the amount of zinc acetate and the morphology of the ZnO nanofibers as a sensing medium can affect the sensitivity of the gas sensor. The preparation of electrospinning solutions containing varying amounts of zinc acetate must be carefully considered due to its impact on morphology and thus sensitivity. Full article

A gas sensor array was developed and evaluated using four high-frequency quartz crystal microbalance devices (with a 30 MHz resonant frequency in fundamental mode). The QCM devices were coated with ethyl cellulose (EC), polymethylmethacrylate (PMMA), Apiezon L (ApL), and Apiezon T (ApT) sensing films, and deposited by the ultrasonic atomization method. The objective of this research was to propose a non-invasive technique for acetone biomarker detection, which is associated with diabetes mellitus disease. The gas sensor array was exposed to methanol, ethanol, isopropanol, and acetone biomarkers in four different concentrations, corresponding to 1, 5, 10, and 15 µL, at temperature of 22 °C and relative humidity of 20%. These samples were used because human breath contains them and they are used for disease detection. Moreover, the gas sensor responses were analyzed using principal component analysis and discriminant analysis, achieving the classification of the acetone biomarker with a 100% membership percentage when its concentration varies from 327 to 4908 ppm, and its identification from methanol, ethanol, and isopropanol. Full article

The field of organic-borne biomarkers has been gaining relevance due to its suitability for diagnosing pathologies and health conditions in a rapid, accurate, non-invasive, painless and low-cost way. Due to the lack of analytical techniques with features capable of analysing such a complex matrix as the human breath, the academic community has focused on developing electronic noses based on arrays of gas sensors. These sensors are assembled considering the excitability, sensitivity and sensing capacities of a specific nanocomposite, graphene. In this way, graphene-based sensors can be employed for a vast range of applications that vary from environmental to medical applications. This review work aims to gather the most relevant published papers under the scope of “Graphene sensors” and “Biomarkers” in order to assess the state of the art in the field of graphene sensors for the purposes of biomarker identification. During the bibliographic search, a total of six pathologies were identified as the focus of the work. They were lung cancer, gastric cancer, chronic kidney diseases, respiratory diseases that involve inflammatory processes of the airways, like asthma and chronic obstructive pulmonary disease, sleep apnoea and diabetes. The achieved results, current development of the sensing sensors, and main limitations or challenges of the field of graphene sensors are discussed throughout the paper, as well as the features of the experiments addressed. Full article

Identifying disease biomarkers and detecting hazardous, explosive, flammable, and polluting gases and chemicals with extremely sensitive and selective sensor devices remains a challenging and time-consuming research challenge. Due to their exceptional characteristics, semiconducting metal oxides (SMOxs) have received a lot of attention in terms of the development of various types of sensors in recent years. The key performance indicators of SMOx-based sensors are their sensitivity, selectivity, recovery time, and steady response over time. SMOx-based sensors are discussed in this review based on their different properties. Surface properties of the functional material, such as its (nano)structure, morphology, and crystallinity, greatly influence sensor performance. A few examples of the complicated and poorly understood processes involved in SMOx sensing systems are adsorption and chemisorption, charge transfers, and oxygen migration. The future prospects of SMOx-based gas sensors, chemical sensors, and biological sensors are also discussed. Full article

Early-stage, precise disease diagnosis and treatment has been a crucial topic of scientific discussion since time immemorial. When these factors are combined with experience and scientific knowledge, they can benefit not only the patient, but also, by extension, the entire health system. The development of rapidly growing novel technologies allows for accurate diagnosis and treatment of disease. Nanomedicine can contribute to exhaled breath analysis (EBA) for disease diagnosis, providing nanomaterials and improving sensing performance and detection sensitivity. Through EBA, gas-based nano-sensors might be applied for the detection of various essential diseases, since some of their metabolic products are detectable and measurable in the exhaled breath. The design and development of innovative nanomaterial-based sensor devices for the detection of specific biomarkers in breath samples has emerged as a promising research field for the non-invasive accurate diagnosis of several diseases. EBA would be an inexpensive and widely available commercial tool that could also be used as a disease self-test kit. Thus, it could guide patients to the proper specialty, bypassing those expensive tests, resulting, hence, in earlier diagnosis, treatment, and thus a better quality of life. In this review, some of the most prevalent types of sensors used in breath-sample analysis are presented in parallel with the common diseases that might be diagnosed through EBA, highlighting the impact of incorporating new technological achievements in the clinical routine. Full article

There has been an exponential surge in reports on two-dimensional (2D) materials ever since the discovery of graphene in 2004. Transition metal dichalcogenides (TMDs) are a class of 2D materials where weak van der Waals force binds individual covalently bonded X–M–X layers (where M is the transition metal and X is the chalcogen), making layer-controlled synthesis possible. These individual building blocks (single-layer TMDs) transition from indirect to direct band gaps and have fascinating optical and electronic properties. Layer-dependent opto-electrical properties, along with the existence of finite band gaps, make single-layer TMDs superior to the well-known graphene that paves the way for their applications in many areas. Ultra-fast response, high on/off ratio, planar structure, low operational voltage, wafer scale synthesis capabilities, high surface-to-volume ratio, and compatibility with standard fabrication processes makes TMDs ideal candidates to replace conventional semiconductors, such as silicon, etc., in the new-age electrical, electronic, and opto-electronic devices. Besides, TMDs can be potentially utilized in single molecular sensing for early detection of different biomarkers, gas sensors, photodetector, and catalytic applications. The impact of COVID-19 has given rise to an upsurge in demand for biosensors with real-time detection capabilities. TMDs as active or supporting biosensing elements exhibit potential for real-time detection of single biomarkers and, hence, show promise in the development of point-of-care healthcare devices. In this review, we provide a historical survey of 2D TMD-based biosensors for the detection of bio analytes ranging from bacteria, viruses, and whole cells to molecular biomarkers via optical, electronic, and electrochemical sensing mechanisms. Current approaches and the latest developments in the study of healthcare devices using 2D TMDs are discussed. Additionally, this review presents an overview of the challenges in the area and discusses the future perspective of 2D TMDs in the field of biosensing for healthcare devices. Full article

Nanophotonics has been widely utilized in enhanced molecularspectroscopy or mediated chemical reaction, which has major applications in the field of enhancing sensing and enables opportunities in developing healthcare monitoring. This review presents an updated overview of the recent exciting advances of plasmonic biosensors in the healthcare area. Manufacturing, enhancements and applications of plasmonic biosensors are discussed, with particular focus on nanolisted main preparation methods of various nanostructures, such as chemical synthesis, lithography, nanosphere lithography, nanoimprint lithography, etc., and describing their respective advances and challenges from practical applications of plasmon biosensors. Based on these sensing structures, different types of plasmonic biosensors are summarized regarding detecting cancer biomarkers, body fluid, temperature, gas and COVID-19. Last, the existing challenges and prospects of plasmonic biosensors combined with machine learning, mega data analysis and prediction are surveyed. Full article

The quantification of gases in breath has gained significant attention as a modern diagnosis method due to its non-invasive nature, and as a painless and straightforward method for the early detection of physiological disorders. Several notable clinical applications have been established for disease diagnosis by correlating exhaled breath samples and specific diseases. In addition, diverse breath molecules represent a biomarker of specific illnesses and are precisely identified by the standard analytical method. However, because of the bulky equipment size, expensive cost, and complexity in measurement when using analytical methods, many researchers are focusing on developing highly selective, sensitive, stable, robust, and economical sensors for breath analysis. It is essential to optimize approaches such as breath sampling, biomarker sensing, data analysis, etc. However, the detection of ppb-level biomarkers in exhaled breath is too challenging to solve due to the abundance of interfering gases. We present a brief and comprehensive review of a recent diagnostic technique that employs nanomaterial (NM)-based sensors to identify the volatile organic compounds (VOCs) associated to diseases. Because they are easily fabricated, chemically versatile, and can be integrated with existing sensing platforms, NMs are ideal for such sensors. Initially, this review provides crucial details about certain representative biomarkers found in diseased patients’ exhaled breath and the demand for breath sensors. Subsequently, the review highlights diverse sensor technologies such as electrical, optical, and mass-sensitive gas sensors and describes their sensing capability for detecting the biomarkers’ concentrations and their primary endeavor of diagnosing disease. Finally, the pitfalls and challenges of sensor characteristics are discussed. This article lays the basis for developing high-performance gas sensors based on novel NMs. Full article