Search Results (287)

Creatine monohydrate is known for its moderate solubility (13 g/L at 25 °C), which limits the feasibility of producing its fast-dissolving forms. Overcoming this limitation is possible through the application of technological approaches, the overview of which is presented in this work, including chemical modification, micronization, granulation, amorphization, formation of solid dispersions, and encapsulation. The results showed the predominance of chemical methods (about 60% of the analyzed patents). At the same time, the use of physical methods and the combination of several technologies can increase both the dissolution rate and the solubility of creatine monohydrate while maintaining its stability. This makes these approaches the most promising for the development of production technology for fast-dissolving forms. Full article

The carbonate reservoir of the Shunbei oilfield is characterized by deep burial depth and high temperature. During acid fracturing, the reaction rate between conventional acid systems and the rock is relatively fast, leading to a limited effective acid penetration distance. To extend the acid penetration distance, a combination of solid retarded acid and conventional acid was used in field operations. The effectiveness of the solid retarded acid depends on its acid generation pattern, making it necessary to study the acid generation behavior of the solid retarded acid. This paper establishes a frame for evaluating the solid retarded acid, including tests for solid retarded acid solubility, acid concentration, and acid-etched fracture conductivity. Based on the test results, the acid generation pattern of solid retarded acid was analyzed, its slow-generation performance was evaluated, and an acid generation model was established. Finally, by integrating the acid generation model with the existing acid fracturing model, the effective distance of solid retarded acid was predicted. The study shows that the solubility of acid-generating materials is influenced by both temperature and solid retarded acid concentration. When the concentration of solid retarded acid exceeds 25%, it does not completely dissolve at room temperature, but can fully dissolve after 40 min at 120 °C. The acid concentration is significantly affected by temperature, with an acid concentration of about 1.6 mol/L at room temperature and up to 3.1 mol/L at high temperatures, comparable to a 12% hydrochloric acid concentration. Solid retarded acid exhibits good slow-generation performance, with a comprehensive reaction rate approximately one-third of that of cross-linked acid. When the acid-rock contact time is around 3 h, the acid-etched fracture conductivity of solid retarded acid can remain above 5 D·cm under a closure pressure of 60 MPa. The predicted effective acid penetration distance of solid retarded acid can reach over 150 m, under typical conditions of Shunbei oilfield. The findings of this study can serve as a reference for the design and optimization of solid retarded acid fracturing. Full article

The consumption of water with very low mineral content (W-VLMC; water with total dissolved solids below 50 mg/L), despite limited and inconsistent evidence and the resulting knowledge gaps, has not been associated with health risks for the general population. However, certain population subgroups (those eating very unbalanced diets or avoiding certain foods, engaged in prolonged periods of fasting, and/or doing prolonged or strenuous exercise as well as pregnant or breastfeeding women) should be mindful of maintaining sufficient intake of all essential minerals through their food if regularly using this type of water as their main beverage. The rapid expansion of water filtration systems—often producing W-VLMC—creates a timely and valuable opportunity to advance research on the health implications of W-VLMC intake. As these systems become increasingly common in educational settings and homes, children represent a subgroup experiencing rising exposure to W-VLMC. Additional studies are needed to assess the health effects of such exposure from early childhood. A complementary yet contrasting perspective is that the use of water intended for human consumption—with stringent quality control standards—and natural mineral waters—inherently pure, thus eliminating the need for filtration—with higher mineralization in both types of water, may provide an additional dietary source of essential minerals, especially for all the population subgroups mentioned above. Full article

Background/Objectives: Children with autism spectrum disorder (ASD) frequently experience poor compliance with oral medication due to bitterness, unpleasant taste, and unsuitable dosage forms such as large tablets or capsules. Risperidone, a widely prescribed antipsychotic for managing ASD symptoms, is particularly challenging in this regard. The present study aimed to develop a novel sucrose-based microfiber drug delivery system to improve the palatability, acceptance, and bioavailability of risperidone in pediatric patients with ASD. Methods: Risperidone was incorporated into sucrose microfibers using centrifugal spinning technology. Fiber morphology was characterized by scanning electron microscopy (SEM). Drug loading (DL), encapsulation efficiency (EE%), and disintegration time were measured. In vitro drug release and cytotoxicity assays were performed using human foreskin fibroblast cells (HFF-1). An in vivo palatability and preference study was conducted in male BALB/c mice to evaluate the acceptability of the formulation compared with a commercial risperidone oral solution. Results: SEM analysis revealed smooth, bead-free, non-porous fibers with uniform morphology and size distribution. The formulation showed a rapid disintegration time of ~3 s, DL of 30 ± 5 µg/mg, and EE% of 60 ± 10%. Approximately 50% of risperidone was released within 15 min. Cytotoxicity testing confirmed that concentrations ≤ 125 µg/mL maintained high cell metabolic activity, indicating biocompatibility. In vivo, the microfiber solution demonstrated a strong preference (93%) compared with the commercial oral solution (30%). Conclusions: Risperidone-loaded sucrose microfibers represent a promising fast-dissolving oral delivery system for children with ASD. This child-friendly formulation improves palatability and compliance while maintaining safety and drug release performance. Full article

Soil organic carbon (SOC) is a critical component of the soil carbon pool, significantly influencing soil fertility and forest ecosystem productivity. Eucalyptus grandis (Rose Gum), one of the most widely introduced and economically valuable fast-growing tree species worldwide, plays an indispensable role in pulpwood production, construction, and bioenergy, and is commonly established and managed in successive rotations in operational practice. Despite its importance, the effects of successive planting on SOC and its labile fractions in plantation soils remain poorly understood. In May 2017, a space-for-time substitution approach was employed to study the effects of successive planting of E. grandis plantations on SOC and its labile fractions, including dissolved organic carbon, light-fraction organic carbon, particulate organic carbon, microbial biomass carbon, and readily oxidizable carbon. The results indicated that the content of SOC and labile organic carbon (LOC) fractions declined concomitant with an increase in successive planting generations. Specifically, total SOC content significantly decreased from 12.63 g·kg⁻¹ in the first-generation forest to 9.37 g·kg⁻¹ in the third-generation forest. The contents of LOC fractions also showed a significant decrease from the first to the second generation, but the rate of this decline slowed in the third generation. The soil carbon pool management index (CPMI) decreased significantly from 100 in the control forest to 46.64 in the third-generation plantation. Redundancy analysis identified water-soluble nitrogen and total nitrogen as the principal common factors exerting influence over SOC and its labile fractions in E. grandis plantations. These findings indicate that successive planting of E. grandis in artificial forests primarily reduces SOC and LOC fractions by lowering soil nutrient content, leading to a decline in soil carbon pool quality. The findings of this study may help provide a scientific basis for the sustainable development of E. grandis plantations in this region. Full article

Our study investigates how non-spherical bubble shapes influence gas–liquid mass transfer across the bubble interface. An analytical shape descriptor, namely Superformula, is used to parametrically define the bubble interface, enabling efficient CFD simulations over a range of Reynolds ($Re$) and Eötvös ($Eo$) numbers. By prescribing the bubble geometry analytically, we avoid expensive interface-capturing simulations and directly compute the concentration field without transient boundary shape pre-equilibration. The represented approach is computationally efficient and captures the impact of bubble shape and flow parameters on the dissolved gas concentration gradients in the surrounding liquid. Results show that bubble deformation alters the distribution of dissolved gas around the bubble and the overall mass transfer rate, with higher $Re$ enhancing convective transport and higher $Eo$ (more deformed bubbles), leading to anisotropic concentration boundary layers. The developed framework not only advances a fundamental understanding of bubble-driven mass transfer mechanisms but also directly addresses industrial needs, particularly in optimizing oxygen delivery within bioreactors contour and similar aerated processes. The proposed efficient modeling strategy provides a basis for developing fast surrogate tools in hybrid modeling frameworks, where high-fidelity CFD insights are incorporated into larger-scale multiphase process simulations. Full article

The aim of this study was to check the content of metal inhibitors before and after the pre-treatment of fast-growing poplar wood using steam explosion (SE) at selected temperatures (160, 175, 190 and 205 °C). An X-ray fluorescence spectrometer (XRF) was used for the analysis. The material was analysed after pre-treatment and in its native form in two variants: incinerated wood chips and incinerated wood chips dissolved in nitric acid. The analysis was intended to show the difference in the content of metals inhibiting biological processes, including enzymatic hydrolysis and fermentation (i.e., chromium, manganese, iron, nickel, copper and zinc). The study aimed to identify changes in the content of metallic inhibitors depending on the SE temperature and to demonstrate differences depending on the methodology used to measure metals in the tested material. The greatest change in metal content in the material after pre-treatment was observed for pre-treatment at 175 °C, regardless of the determination method used. Both methods allow the trend in changes in metal content in wood material to be determined. However, due to the heterogeneous structure of wood, the methods give different results, especially for iron. Full article

Nisin, a food preservative lantibiotic produced by Lactococcus lactis, exhibits potent antimicrobial activity against a wide range of Gram-positive pathogens, including antibiotic-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA). This study explores the development of a novel nano drug delivery platform comprising nisin-loaded niosomes, formulated via microfluidic mixing, and integrated into fast-dissolving oral films for targeted buccal administration. Microfluidic synthesis enabled the precise control of critical parameters including the flow rate ratio, surfactant composition, and lipid concentration, resulting in uniform niosomal vesicles with optimal size distribution (100–200 nm), low polydispersity index, and high encapsulation efficiency. Span 40 and Span 60 were employed as non-ionic surfactants, stabilized with cholesterol to improve bilayer rigidity and drug retention. The encapsulated nisin demonstrated improved physicochemical stability over time and protection against proteolytic degradation, thus preserving its antimicrobial potency. The niosomal suspensions were subsequently incorporated into polymer-based oral films as a final dosage form composed of polyvinyl alcohol (PVA) as the primary film-forming polymer, polyethylene glycol 400 (PEG400) as a plasticizer, and sucralose and mint as a sweetener and flavoring agent, respectively. A disintegrant was added to accelerate film dissolution in the oral cavity, facilitating the rapid release of niosomal nisin. The films were cast and evaluated for thickness uniformity, mechanical properties, disintegration time, surface morphology, and drug content uniformity. The dried films exhibited desirable flexibility, rapid disintegration (<30 s), and consistent distribution of nisin-loaded vesicles. In vitro antimicrobial assays confirmed that the bioactivity of nisin was retained post-formulation, showing effective inhibition zones (16 mm) against Bacillus subtilis. This delivery system offers a promising platform for localized antimicrobial therapy in the oral cavity, potentially aiding in the treatment of dental plaque, oral infections, and periodontal diseases. Overall, the integration of microfluidic-synthesized nisin niosomes into oral films presents a novel, non-invasive strategy for enhancing the stability and therapeutic efficacy of peptide-based drugs in mucosal environments. Physicochemical characterization of the niosomes and niosome films was performed using Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate thermal stability and scanning electron microscopy (SEM) to assess surface morphology. In vitro peptide release studies demonstrated sustained release from both niosomal suspensions and film matrices, and the resulting data were further fitted to established kinetic models to elucidate the underlying drug release mechanisms. This delivery system offers a promising platform for localized antimicrobial therapy in the oral cavity, potentially aiding in the treatment of dental plaque, oral infections, and periodontal diseases. Overall, the integration of microfluidic-synthesized nisin niosomes into oral films presents a novel, non-invasive strategy for enhancing the stability and therapeutic efficacy of peptide-based drugs in mucosal environments. Full article

Current food packaging, primarily made of non-biodegradable plastics, significantly contributes to environmental pollution. New packaging systems for food applications from biopolymers and/or with multifunctional properties are being developed as substitutes for synthetic polymers. The increasing concern over the environmental effects of packaging waste is driving a transition toward renewable packaging materials. Edible films and coatings play a vital role in maintaining food quality by preventing the loss of aroma, flavour, and important components, while also extending shelf life. Biopolymers, including polysaccharides, proteins, and lipids, are gaining attention as the future of packaging due to the environmental issues linked to petrochemical-based plastics. Modern packaging should not only protect products but also be biodegradable, recyclable, and have a minimal ecological impact. This review comprehensively summarises edible packaging in the form of single-use, fast-dissolving pouches for food applications as a circular approach and a sustainable solution in food technology. Innovations have resulted in the development of a unique packaging solution made from renewable sources. This packaging utilises plant and animal by-products to create edible films and pouches that are easy to seal. Edible packaging is emerging as a sustainable alternative, designed to simplify food packaging while minimising waste. Fast-dissolving scalable packaging, particularly edible films that dissolve in water, is used for individual servings of dry foods and instant beverages. This includes items like breakfast cereals, instant coffee or tea, and various powdered products. Additionally, there is an innovative approach to single-use packaging for oils and powders, leveraging the convenience and efficiency of these fast-dissolving films. Edible pouch packaging, made from safe and edible materials, provides a biodegradable option that decomposes naturally, thereby reducing pollution and the need for disposal. Full article

Urban renewal has driven historic conservation districts to experience a series of changes characterized by gentrification. In the 21st century, internet traffic can be fully monetized. The intervention of the internet has made the gentrification process more diversified. Using color and item detection, points of interests (POIs), and word cloud analysis, this study takes a typical historic conservation district as an example to explore how it changed spatially, economically, and socially during the gentrification process. The results show that the internet celebrity economy possesses both promoting and dissolving effects. The promoting effects include the following: (1) the internet celebrity economy breaks the elites’ monopoly on spatial aesthetic discourse; (2) emotional value has promoted the integration of different groups’ consumption; and (3) gentrification occurs locally so spatial exclusion is not significant. The dissolving effects include the following: (1) the low-cost and rapid renovation of space reduces spatial quality; and (2) the fast-moving consumer model may possibly lead to unsustainable development. This study proposes that the intervention of the internet celebrity economy can alleviate the isolation drawbacks of traditional gentrification and promote social equity, and the promoting effects outweigh the negative effects. Full article

(1) Background: Water, comprising about 70–80% of cellular mass, is the most abundant constituent of living cells. Upon exposure to ionizing radiation, water undergoes radiolysis, generating a variety of reactive species, including free radicals and molecular products. Among these, hydroxyl radicals (^•OH) are particularly damaging due to their very high reactivity and their capacity to induce oxidative injury to vital biomolecules such as DNA, membrane lipids, and proteins. From a radiation-chemical perspective, this study investigates the selective scavenging ability of molecular hydrogen (H₂) toward ^•OH radicals, with the aim of evaluating its potential as an antioxidant and radioprotective agent; (2) Methods: We employed our Monte Carlo track chemistry simulation code, IONLYS-IRT, to model the time-dependent yields of ROS in a neutral, aerated aqueous environment. The simulations included varying concentrations of dissolved H₂ and, for comparison, cystamine—a well-known sulfur-containing radioprotector and antioxidant. Irradiation was simulated using 300 MeV protons, chosen to mimic the radiolytic effects of low linear energy transfer (LET) radiation, such as that of ⁶⁰Co γ-rays or fast (>1 MeV) electrons; (3) Results: Our simulations quantitatively demonstrated that H₂ selectively scavenges ^•OH radicals. Nevertheless, its scavenging efficiency was consistently lower than that of cystamine, which produced a faster and more pronounced suppression of ^•OH due to its higher reactivity and superior radical-quenching capacity; (4) Conclusions: Molecular hydrogen offers several unique advantages, including low toxicity, high diffusivity, selective scavenging of ^•OH radicals, and well-documented anti-inflammatory effects. Although it is less potent than cystamine in terms of radical-scavenging efficiency, its excellent safety profile and biological compatibility position H₂ as a promising radioprotector and antioxidant for therapeutic applications targeting radiation-induced oxidative stress and inflammation. Full article

A novel behavior of fluid inclusions (FIs) in crystals is reported in this study. Typically, at “high” temperature, FIs in molecular crystals become faceted, adopting the morphology of a single crystal. Usually, upon cooling, these faceted FIs develop into rounded cavities containing the mother solution with a retreat gas bubble. After annealing at low temperature, the FIs reshape back into a negative-crystal morphology, but the gas bubble remains. This latter process can take from minutes to very long times depending on the storage temperature and solubility. Investigations into the behavior of FIs of dicumyl peroxide (DCP) under fast cooling rates have revealed a morphological transition from negative crystals to FIs with a holly-leaf shape. The spikes of the holly-leaf-shaped FIs point toward the corners of the former negative crystal, and the sizes of the gas bubbles exceed those of conventional retreat bubbles. Therefore, it is likely that this phenomenon is linked to rapid cooling and an excess of CO₂ dissolved in the mother solution from which the DCP single crystals were grown. The concentration of the solution inside the FIs rapidly increases after the nucleation of this large gas bubble. This is consistent with a sharp acceleration of inward crystal growth immediately after its appearance. Interestingly, FIs in pyroclastic olivine crystals grown from CO₂-rich lava can also present a holly-leaf shape. Thus, this non-equilibrium morphological transition may be relatively common. Full article

In this review, our intention was to shed some light on the history of sublingual and buccal delivery over the past 75 years. By searching the query sublingual and buccal, we noticed four steady growth periods in the number of publications between 1950 and 2025. The early phase of sublingual and buccal drug delivery (1950–1982) saw limited attempts to explore this delivery route. The exploratory growth phase (1983–1993) was marked by the use of nitroglycerin to treat angina, calcium channel blockers to treat hypertension, ACE inhibitors to treat heart conditions, the use of opioids in pain management therapy, and peptide and hormonal therapy. The diversification and discovery phase (1994–2009) was marked by the introduction of small molecules for the treatment of opioid use disorder and analgesia, the use of animal models to enhance the pharmacokinetic understanding of the sublingual and buccal route, the use of penetration enhancers, peptide and hormonal therapy, and few marked FDA drug approvals in this area. The innovation and integration phase (2010–2025) was marked by the use of nanoparticles, multilayered mucoadhesive systems, pediatric formulations (fast-dissolving films and tablets), immunotherapy and vaccine delivery, and a broad spectrum of therapeutic agents, such as steroids, antifungals, cannabinoids, antidepressants, antipsychotics, and narcotics (e.g., buprenorphine and apomorphine), novel formulations of fentanyl and diazepam for pain and seizure control, and the introduction of buccal vitamin D3 sprays. Understanding the history of sublingual and buccal delivery demonstrates a growing area of research focused on enhancing mucosal drug delivery for achieving local and systemic therapeutic benefits. Full article

The main aim of this study was to develop a diclofenac-loaded, orodispersible formulation prepared by double-needle electrospinning. For the use of two needles, one above the other, a new needle holder was designed and 3D printed. During the optimization of the drug-free PVP carrier, the effect of the polymer concentration on the morphology and average fiber diameter was investigated. Electrospinning was possible for solutions with a PVP concentration between 7.5 and 15 w/w%. Too low viscosity led to smooth-surfaced nanoparticles, since electrospraying occurred. The optimal material properties and process parameters were used to prepare drug-loaded nanofibers. The morphology, crystallinity, chemical interactions, encapsulation efficiency, drug distribution, in vitro disintegration, in vitro dissolution, cytocompatibility, and 6-month stability were tested. According to the results, the electrospun formulation was an amorphous solid dispersion with excellent encapsulation efficiency. The drug distribution was homogeneous within the nanofiber matrix. The disintegration was completed in about 5 s in artificial saliva and about 41 s on an artificial tongue. The dissolution in artificial saliva was complete within 10 min. Overall, a promising formulation was developed with rapid disintegration, immediate drug release, and good stability. Additionally, a new in vitro dissolution method (“AS-to-FaSSGF”) was developed to obtain a bigger picture of drug dissolution throughout the gastrointestinal tract. Full article

A significant development has been the integration of natural elements with bio-based materials to produce entirely bio-based functional textiles. In this investigation, lycopene, derived from tomatoes, is used as a new natural red dye for silk. A suitable solvent was selected to precisely measure the lycopene content in silk. The stability of lycopene in a simulated dye bath was examined in relation to heating duration and pH values. Central composite design was employed to evaluate the impact of dyeing conditions on the color intensity of silk. The results showed that lycopene dissolves more efficiently in dichloromethane than in water or ethanol. UV–Vis absorption spectra, which remained nearly constant, indicate that lycopene retains its stability after being heated at 90 °C for 60 min or when the pH is between 3.2 and 6.2. Higher temperatures lead to increased lycopene adsorption, thereby enhancing color intensity. Based on the ANOVA analysis from the central composite design experiment, the most influential factor affecting color intensity is the concentration of lycopene, followed by temperature, and then pH. As the lycopene concentration increases, the color intensity and saturation of the dyed silk also increase. Although the lycopene-dyed silk shows good wash fastness, there is room for improvement in rub fastness. In summary, this study confirms the potential of using lycopene as a new natural red dye for silk. Full article