Search Results (7)

The European beech (Fagus sylvatica L.) is a tree species common throughout Europe, with the eastern boundary of its range extending across Poland. Samples were collected in several microhabitats of beech stands (e.g., leaf litter, rotting wood, moss growing on tree stumps) in the Wronie Forest Reserve. The aim of this study was to determine the effect of microhabitat conditions found in beech forests on the diversity of mite assemblages and their species richness. The collected samples comprised a total of 144 identified species (78 species of Oribatida, 66 species of Mesostigmata), represented by 74,433 mite individuals (71,124 Oribatida and 3309 Mesostigmata). All the analyzed microhabitats varied in terms of their mite assemblages. The highest number of species was identified in moss on beech stumps (72 species—53 Oribatida and 19 Mesostigmata) and in samples collected from beech litter (68 species—48 Oribatida and 20 Mesostigmata). The most numerously represented species in the analyzed material was Parachipteria willmanni, which was classified to superdominants in moss on beech stumps and moss on beech trunks (0.5 and 2.0 m), which were the most similar microhabitats. In contrast, mite assemblages in rotting wood and marsh litter differed greatly. Full article

The authors investigate the structural characteristics, regeneration processes, growth, development, and survival of a young generation of common beech (Fagus sylvatica L.) based on three periodic measurements (1998, 2009, and 2018). The studied forest community (Lamio orvale-Fagetum sylvaticae (Ht. 1938) Bohridi 1963) is situated within a forest reserve in Plitvice Lakes National Park, Croatia. Monitoring was carried out according to UN/ECE (2000) for systematic and repeated research. The basic structural indicators, structural canopy elements, and appearance of the young generation were measured as the basic conditions of natural restoration in repeated phytocenological surveys (1980, 1988, 2004). The distribution of the number of trees of the first two measurements (1998–2009) indicates a distribution with pronounced right asymmetry. The structural dynamics observed during the surveys and alongside vegetation surveys indicate the dynamics of the growth and development of beech. The results show that the main drivers of development dynamics in protected forest ecosystems are structural breaks (gaps) that occur in stands due to the action of abiotic and biotic factors. The passive management model in effect in the national park should be replaced with a more active approach to facilitate natural processes with the aim of preserving and renewing the forest ecosystem. Full article

The European temperate forest zone has great importance, in terms of maintaining the habitats of not only forests but also anthropogenous grasslands, which were formed as a result of habitat reconstruction. These habitats have great importance, by means of nature conservation, landscape use, economy, and forest and grassland use. The mosaic-like habitat complexes that consist of these grasslands and forest patches help to increase biodiversity and supply the habitat for forest game. In this survey, changes in the vegetation of the temperate forests (Fagetum) of the Mátra Mountains of Hungary were investigated after reconstruction. In 2012, shrub cutting was carried out in the area of Parádóhuta, and then three different management methods (abandoning, mowing, and grazing) were utilized. Our goals were the following: to perform a vegetation survey of the sample areas (i); surveying the natural regeneration of the grassland and analyzing its biodiversity, nature conservation, and economical value (ii); and analyzing the vegetation in terms of nature conservation and valuing its life form spectrum, economy values, and livestock-feeding ability (iii). According to our results, systematic mowing and a less-intensive grazing had a significantly positive effect on biodiversity and the coverage of species, thus increasing the naturalness of the studied grassland habitats, while wild game were able to act as ecological engineers. Full article

We studied species turnover and changes of ecological conditions and plant strategies on forest gaps created by natural disturbances (sleet, windthrow). We studied five forest gaps and a control plot within in the Dinaric silver fir-beech forest in the southern part of Slovenia. Forest gaps varied in age and size. The total number of recorded species in gaps was 184, with the highest number (106) at the largest forest gap and with the 58 species at the control locality in a juvenile beech forest. Forest gaps were predominantly colonised mostly by species of understory, forest margins, and forest clearings. The species presented in all forest gaps are representatives of the understory of beech forests. Species colonising forest gaps prefer habitats with more sunlight, medium wet to dry soil, and are tolerant to high daily and seasonal temperature fluctuations. In gaps, the community of plant species has a competitive strategy, which is also complemented with a stress-tolerator strategy. We determined that a forest gap represents a significant habitat patch, especially for those plant species which were not present there before. Full article

This research was conducted to determine the cause, intensity and location of damage (stem, butt end, root collar, root) and the extent of damage to standing trees during felling and processing by an harvester and timber extraction by a forwarder (cut-to-length system). The research was conducted in the central part of the Republic of Croatia in the Management Unit (MU) “Bjelovarska Bilogora” during the thinning of Subcompartment 14b, area of 18.28 ha, in the stand of hornbeam (Carpino betuli—Quercetum roboris fagetosum Rauš 1975), age 70, and of Subcompartment 14c, area of 9.07 ha, in a stand of common beech (Carici pilosae—Fagetum Oberdorfer 1957) aged 79 years. The thinning intensity was 12.13% in Subcompartment 14b and 13.72% in Subcompartment 14c. Field measurements were carried out on sample plots—the first time in 2017 to determine the intensity and characteristics of the damage to standing trees with regard to the cause of the damage (harvester or forwarder), and the second time in 2018 to determine the overall intensity and features of the damage to standing trees after finishing harvesting operations. For all trees remaining in the stand after the harvesting operations, the following were determined: tree species, diameter at breast height (DBH), the position of the tree in the stand depending on the forest traffic infrastructure, and—if damaged—cause of damage, type of damage, the position of damage on the tree, and dimensions of damage. The intensity of the damage was expressed by the ratio of damaged and undamaged trees, with a detailed analysis of bark damage (squeezed-bark damage and peeled-bark injuries). The results of the research indicate the highest prevalence of peeled-bark injuries. In relation to the total number of standing trees, trees with peeled-bark injuries were more represented in Subcompartment 14c (39%) than in Subcompartment 14b (33%). In Subcompartment 14b, the harvester and the forwarder damaged an equal number of trees, while in Subcompartment 14c, the harvester damaged 59% of the damaged trees. In both subcompartments, an average of 83% of (peeled bark) injuries were up to 1.3 m above the ground. In both subcompartments, the most common (67%) were injuries up to 100 cm² in size, for which many authors claim the tree can heal by itself. Given the increasing use of harvester-forwarder systems in deciduous stands and research results that indicate possible damage to standing trees, it is necessary to pay attention to all phases of planning and execution of timber harvesting operations, thus minimising negative effects. Full article

Scree forests with large numbers of protected plants and wildlife are seriously threatened by climate change due to more frequent drought episodes, which cause challenges for very stony, shallow soils. The effect of environmental factors on the radial growth of five tree species—European beech (Fagus sylvatica L.), Norway spruce (Picea abies (L.) Karst.), sycamore maple (Acer pseudoplatanus L.), European ash (Fraxinus excelsior L.), and mountain elm (Ulmus glabra Huds.)—was studied in the mixed stands (105–157 years) in the western Krkonoše Mountains (Czech Republic) concerning climate change. These are communities of maple to fir beechwoods (association Aceri-Fagetum sylvaticae and Luzulo-Abietetum albae) on ranker soils at the altitude 590–700 m a.s.l. Production, structure, and biodiversity were evaluated in seven permanent research plots and the relationships of the radial growth (150 cores) to climatic parameters (precipitation, temperature, and extreme conditions) and air pollution (SO₂, NO_X, ozone exposure). The stand volume reached 557–814 m³ ha⁻¹ with high production potential of spruce and ash. The radial growth of beech and spruce growing in relatively favorable habitat conditions (deeper soil profile and less skeletal soils) has increased by 16.6%–46.1% in the last 20 years. By contrast, for sycamore and ash growing in more extreme soil conditions, the radial growth decreased by 12.5%–14.6%. However, growth variability increased (12.7%–29.5%) for all tree species, as did the occurrence of negative pointer years (extremely low radial growth) in the last two decades. The most sensitive tree species to climate and air pollution were spruce and beech compared to the resilience of sycamore and ash. Spectral analysis recorded the largest cyclical fluctuations (especially the 12-year solar cycle) in spruce, while ash did not show any significant cycle processes. The limiting factors of growth were droughts with high temperatures in the vegetation period for spruce and late frosts for beech. According to the degree of extreme habitat conditions, individual tree species thus respond appropriately to advancing climate change, especially to an increase in the mean temperature (by 2.1 °C), unevenness in precipitation, and occurrence of extreme climate events in the last 60 years. Full article

The quality potential and possibilities of using beech logs and sawn wood was investigated. Twenty-seven beech logs, with a mean diameter of 48 cm, were cut from 10 trees from a Hacquetio epipactidis-Fagetum site in SE Slovenia. The trees were pre-selected according to the national 5-level quality scale for forest stand evaluation, using two trees per class. Beech logs were classified according to the EN 1316-1 and sawn afterwards into unedged boards of 35 mm nominal thickness. Altogether, 250 boards were visually graded according to the rules of the European Organisation of the Sawmill Industry (EOS). Longitudinal vibration of logs and boards with the determination of stress wave velocity by MTG timber grader was additionally included into the quality assessment. In the case of logs, we confirmed significance of the relationship between visually assessed log quality and stress wave velocity. The stress wave velocity in logs was also related to the stress wave velocity in boards, where it varied considerably, especially for low-graded material. In the case of sawn wood, the relationship between sawn wood grade and stress wave velocity was insignificant. The research confirmed the possibility of presorting of logs, visually or non-destructively, for better classification and utilization of sawn timber. Full article