Search Results (10)

Salmonella spp. represent a food safety risk in the production chain because of their potential for biofilm development. This study examined the biofilm formation of eight Salmonella serotypes from diverse foodborne outbreaks on three food-contact surfaces, stainless steel, silicone, and nylon, at 10 °C and 37 °C. The effect of temperature was observed in slower biofilm formation at 10 °C with about 5-log (cfu/cm²) after 24 h, contrasting with 7-log (cfu/cm²) at 37 °C. The material also influenced biofilm formation, with the strongest biofilms on stainless steel at 10 °C and silicone at 37 °C. The serotypes producing the strongest biofilms were S. Enteritidis, S. Saint Paul, and S. Montevideo. The weakest serotypes were S. Senftenberg, S. Anatum, and the avirulent S. Typhimurium. The production of extra-polymeric substances was evident with S. Enteritidis. The biofilm index showed the highest value for low temperature, nylon, and silicone, and for S. Montevideo, S. Enteritidis, and S. Saint Paul. The whole-genome sequencing of each serovar suggested that single nucleotide polymorphisms in the curli (csg) genes may have contributed to the strong biofilm-forming ability of S. Montevideo and S. Saint Paul and the weaker ability of S. Senftenberg. These results can help with the correct development of sanitizing interventions based on the Salmonella strain of concern. Full article

The mechanical properties of faecal sludge (FS) influence its moisture retention characteristics to a greater extent than other properties. A comprehensive fundamental characterisation of the mechanical properties is scarcely discussed in the literature. This research focused on bulk and true densities, porosity, particle size distribution and zeta-potential, extracellular polymeric substances, rheology and dilatancy, microstructure analysis, and compactibility in the context of using the FS as a substitute for soil in land reclamation and bioremediation processes. FSs from different on-site sanitation systems were collected from around Durban, South Africa. The porosity of the FSs varied between 42% and 63%, with the zeta-potential being negative, below 10 mV. Over 95% of the particles were <1000 µm. With its presence in the inner part of the solid particles, tightly bound extra-cellular polymeric substances (TB-EPSs) influenced the stability of the sludge by tightly attaching to the cell walls, with the highest being in the septic tank with the greywater sample. More proteins than carbohydrates also confirmed characterised the anaerobic nature of the sludge. The results of the textural properties using a penetrometer showed that the initial slope of the positive part of the penetration curve was related to the stiffness of the sludge sample and similar to that of sewage sludge. The dynamic oscillatory measurements exhibited a firm gel-like behaviour with a linear viscoelastic behaviour of the sludges due to the change in EPSs because of anaerobicity. The high-TS samples exhibited the role of moisture as a lubricating agent on the motion of solid particles, leading to dilatancy with reduced moisture, where the yield stress was no longer associated with the viscous forces but with the frictional contacts of solid–solid particle interactions. The filtration–compression cell test showed good compactibility, but the presence of unbound moisture even at a high pressure of 300 kPa meant that not all unbound moisture was easily removable. The moisture retention behaviour of FS was influenced by its mechanical properties, and any interventional changes to these properties can result in the release of the bound moisture of FS. Full article

Helicobacter pylori is a gastric pathogen that infects nearly half of the global population and is recognized as a group 1 carcinogen by the Word Health Organization. The global rise in antibiotic resistance has increased clinical challenges in treating H. pylori infections. Biofilm growth has been proposed to contribute to H. pylori’s chronic colonization of the host stomach, treatment failures, and the eventual development of gastric diseases. Several components of H. pylori have been identified to promote biofilm growth, and several of these may also facilitate antibiotic tolerance, including the extracellular matrix, outer membrane proteins, shifted morphology, modulated metabolism, efflux pumps, and virulence factors. Recent developments in therapeutic approaches targeting H. pylori biofilm have shown that synthetic compounds, such as small molecule drugs and plant-derived compounds, are effective at eradicating H. pylori biofilms. These combined topics highlight the necessity for biofilm-based research in H. pylori, to improve current H. pylori-targeted therapeutic approaches and alleviate relative public health burden. In this review we discuss recent discoveries that have decoded the life cycle of H. pylori biofilms and current biofilm-targeted treatment strategies. Full article

The usefulness of nanoparticles (NPs) in biological applications, such as nanomedicine, is becoming more widely acknowledged. Zinc oxide nanoparticles (ZnO-NPs) are a type of metal oxide nanoparticle with an extensive use in biomedicine. Here, ZnO-NPs were synthesized using Cassia siamea (L.) leaf extract and characterized using state-of-the-art techniques; UV–vis spectroscopy, XRD, FTIR, and SEM. At sub-minimum inhibitory concentration (MIC) levels, the ability of ZnO@Cs-NPs to suppress quorum-mediated virulence factors and biofilm formation against clinical MDR isolates (Pseudomonas aeruginosa PAO1 and Chromobacterium violaceum MCC-2290) was tested. The ½MIC of ZnO@Cs-NPs reduced violacein production by C. violaceum. Furthermore, ZnO@Cs-NPs sub-MIC significantly inhibited virulence factors such aspyoverdin, pyocyanin, elastase, exoprotease, rhamnolipid, and the swimming motility of P. aeruginosa PAO1 by 76.9, 49.0, 71.1, 53.3, 89.5, and 60%, respectively. Moreover, ZnO@Cs-NPs also showed wide anti-biofilm efficacy, inhibiting a maximum of 67 and 56% biofilms in P. aeruginosa and C. violaceum, respectively. In addition, ZnO@Cs-NPs suppressed extra polymeric substances (EPS) produced by isolates. Additionally, under confocal microscopy, propidium iodide-stained cells of P. aeruginosa and C. violaceum show ZnO@Cs-NP-induced impairment in membrane permeability, revealing strong anti-bacterial efficacy. This research demonstrates that newly synthesized ZnO@Cs-NPs demonstrate a strong efficacy against clinical isolates. In a nutshell, ZnO@Cs-NPs can be used as an alternative therapeutic agent for managing pathogenic infections. Full article

Bacillus anthracis, the causative agent of anthrax in humans, livestock, and wildlife, exists in a community with hundreds of other species of bacteria in the environment. Work on the genetics of these communities has shown that B. anthracis shares a high percentage of chromosomal genes with both B. thuringiensis and B. cereus, and that phenotypic differences among these bacteria can result from extra-chromosomal DNA in the form of plasmids. We developed a simple hypothetical individual-based model to simulate the likelihood of detecting plasmids with genes encoding anthrax toxins within bacterial communities composed of B. anthracis, B. thuringiensis, and B. cereus, and the surrounding matrix of extra-cellular polymeric substances. Simulation results suggest the horizontal transfer of plasmids with genes encoding anthrax toxins among Bacillus species persisting outside the host could function as a proximate factor triggering anthrax outbreaks. Full article

Candida parapsilosis is the major non-C. albicans species involved in the colonization of central venous catheters, causing bloodstream infections. Biofilm formation on medical devices is considered one of the main causes of healthcare-associated infections and represents a global public health problem. In this context, the development of new nanomaterials that exhibit anti-adhesive and anti-biofilm properties for the coating of medical devices is crucial. In this work, we aimed to characterize the antimicrobial activity of two different coated-surfaces, graphene oxide (GO) and curcumin-graphene oxide (GO/CU) for the first time, against C. parapsilosis. We report the capacity of GO to bind and stabilize CU molecules, realizing a homogenous coated surface. We tested the anti-planktonic activity of GO and GO/CU by growth curve analysis and quantification of Reactive Oxigen Species( ROS) production. Then, we tested the antibiofilm activity by adhesion assay, crystal violet assay, and live and dead assay; moreover, the inhibition of the formation of a mature biofilm was investigated by a viability test and the use of specific dyes for the visualization of the cells and the extra-polymeric substances. Our data report that GO/CU has anti-planktonic, anti-adhesive, and anti-biofilm properties, showing a 72% cell viability reduction and a decrease of 85% in the secretion of extra-cellular substances (EPS) after 72 h of incubation. In conclusion, we show that the GO/CU conjugate is a promising material for the development of medical devices that are refractory to microbial colonization, thus leading to a decrease in the impact of biofilm-related infections. Full article

Arsenic (As), distributed widely in the natural environment, is a toxic substance which can severely impair the normal functions in living cells. Research on the genetic determinants conferring functions in arsenic resistance and metabolism is of great importance for remediating arsenic-contaminated environments. Many organisms, including bacteria, have developed various strategies to tolerate arsenic, by either detoxifying this harmful element or utilizing it for energy generation. More and more new arsenic resistance (ars) determinants have been identified to be conferring resistance to diverse arsenic compounds and encoded in ars operons. There is a hazard in mobilizing arsenic during gold-mining activities due to gold- and arsenic-bearing minerals coexisting. In this study, we isolated 8 gold enrichment strains from the Zijin gold and copper mine (Longyan, Fujian Province, China) wastewater treatment site soil, at an altitude of 192 m. We identified two Brevundimonas nasdae strains, Au-Bre29 and Au-Bre30, among these eight strains, having a high minimum inhibitory concentration (MIC) for As(III). These two strains contained the same ars operons but displayed differences regarding secretion of extra-polymeric substances (EPS) upon arsenite (As(III)) stress. B. nasdae Au-Bre29 contained one extra plasmid but without harboring any additional ars genes compared to B. nasdae Au-Bre30. We optimized the growth conditions for strains Au-Bre29 and Au-Bre30. Au-Bre30 was able to tolerate both a lower pH and slightly higher concentrations of NaCl. We also identified folE, a folate synthesis gene, in the ars operon of these two strains. In most organisms, folate synthesis begins with a FolE (GTP-Cyclohydrolase I)-type enzyme, and the corresponding gene is typically designated folE (in bacteria) or gch1 (in mammals). Heterologous expression of folE, cloned from B. nasdae Au-Bre30, in the arsenic-hypersensitive strain Escherichia coli AW3110, conferred resistance to As(III), arsenate (As(V)), trivalent roxarsone (Rox(III)), pentavalent roxarsone (Rox(V)), trivalent antimonite (Sb(III)), and pentavalent antimonate (Sb(V)), indicating that folate biosynthesis is a target of arsenite toxicity and increased production of folate confers increased resistance to oxyanions. Genes encoding Acr3 and ArsH were shown to confer resistance to As(III), Rox(III), Sb(III), and Sb(V), and ArsH also conferred resistance to As(V). Acr3 did not confer resistance to As(V) and Rox(V), while ArsH did not confer resistance to Rox(V). Full article

Humans are dependent upon soil which supplies food, fuel, chemicals, medicine, sequesters pollutants, purifies and conveys water, and supports the built environment. In short, we need soil, but it has little or no need of us. Agriculture, mining, urbanization and other human activities result in temporary land-use and once complete, used and degraded land should be rehabilitated and restored to minimize loss of soil carbon. It is generally accepted that the most effective strategy is phyto-remediation. Typically, phytoremediation involves re-invigoration of soil fertility, physicochemical properties, and its microbiome to facilitate establishment of appropriate climax cover vegetation. A myco-phytoremediation technology called Fungcoal was developed in South Africa to achieve these outcomes for land disturbed by coal mining. Here we outline the contemporary and expanded rationale that underpins Fungcoal, which relies on in situ bio-conversion of carbonaceous waste coal or discard, in order to explore the probable origin of humic substances (HS) and soil organic matter (SOM). To achieve this, microbial processing of low-grade coal and discard, including bio-liquefaction and bio-conversion, is examined in some detail. The significance, origin, structure, and mode of action of coal-derived humics are recounted to emphasize the dynamic equilibrium, that is, humification and the derivation of soil organic matter (SOM). The contribution of plant exudate, extracellular vesicles (EV), extra polymeric substances (EPS), and other small molecules as components of the dynamic equilibrium that sustains SOM is highlighted. Arbuscular mycorrhizal fungi (AMF), saprophytic ectomycorrhizal fungi (EMF), and plant growth promoting rhizobacteria (PGPR) are considered essential microbial biocatalysts that provide mutualistic support to sustain plant growth following soil reclamation and restoration. Finally, we posit that de novo synthesis of SOM is by specialized microbial consortia (or ‘humifiers’) which use molecular components from the root metabolome; and, that combinations of functional biocatalyst act to re-establish and maintain the soil dynamic. It is concluded that a bio-scaffold is necessary for functional phytoremediation including maintenance of the SOM dynamic and overall biogeochemistry of organic carbon in the global ecosystem Full article

The article presents the potential impact of flat drive and transport belts on people’s safety during a fire. The analysis distinguished belts made of classically used fabric–rubber composite materials reinforced with cord and currently used multilayer polymer composites. Moreover, the products’ multilayers during the thermal decomposition and combustion can be a source of emissions for unpredictable and toxic substances with different concentrations and compositions. In the evaluation of the compared belts, a testing methodology was used to determine the toxicometric indicators (W_LC50SM) on the basis of which it was possible to determine the toxicity of thermal decomposition and combustion products in agreement with the standards in force in several countries of the EU and Russia. The analysis was carried out on the basis of the registration of emissions of chemical compounds during the thermal decomposition and combustion of polymer materials at three different temperatures. Moreover, the degradation kinetics of the polymeric belts by using the thermogravimetric (TGA) technique was evaluated. Test results have shown that products of thermal decomposition resulting from the neoprene (NE22), leder leder (LL2), thermoplastic connection (TC), and extra high top cower (XH) belts can be characterized as moderately toxic or toxic. Their toxicity significantly increases with the increasing temperature of thermal decomposition or combustion, especially above 450 °C. The results showed that the belts made of several layers of polyamide can be considered the least toxic in fire conditions. The TGA results showed that NBR/PA/PA/NBR belt made with two layers of polyamide and the acrylonitrile–butadiene rubber has the highest thermal stability in comparison to other belts. Full article

Monoderm bacteria possess a cell envelope made of a cytoplasmic membrane and a cell wall, whereas diderm bacteria have and extra lipid layer, the outer membrane, covering the cell wall. Both cell types can also produce extracellular protective coats composed of polymeric substances like, for example, polysaccharidic capsules. Many of these structures form a tight physical barrier impenetrable by phage virus particles. Tailed phages evolved strategies/functions to overcome the different layers of the bacterial cell envelope, first to deliver the genetic material to the host cell cytoplasm for virus multiplication, and then to release the virion offspring at the end of the reproductive cycle. There is however a major difference between these two crucial steps of the phage infection cycle: virus entry cannot compromise cell viability, whereas effective virion progeny release requires host cell lysis. Here we present an overview of the viral structures, key protein players and mechanisms underlying phage DNA entry to bacteria, and then escape of the newly-formed virus particles from infected hosts. Understanding the biological context and mode of action of the phage-derived enzymes that compromise the bacterial cell envelope may provide valuable information for their application as antimicrobials. Full article