Search Results (8)

This manuscript provides an in-depth review of both artificial and natural sweeteners, including polyols and plant-derived alternatives, examining their sweetening potency, glycemic index, modes of action, and applications in the food sector. The rising demand for sugar substitutes, fueled by health concerns such as obesity and diabetes, has prompted significant research into low-calorie and non-nutritive sweeteners. This work categorizes sweeteners into synthetic options (such as aspartame, sucralose, saccharin) and naturally occurring ones (such as stevia, monk fruit, and polyols like sorbitol, xylitol, erythritol), focusing on physico-chemical characteristics, relative sweetness (ranging from 100 to 220,0000 times sweeter than sucrose), and glycemic index, important for their use in diabetes-friendly food products. The current manuscript examines how these sweeteners interact with taste receptors to induce sweetness perception without contributing significant calories. It also discusses their health implications and controversies and limitations regarding healthy and safety data, process feasibility, market application trends, environmental stability, and commercialization challenges. The review also addresses challenges in scaling production and ensuring the economic viability of plant-based sweeteners, offering a forward-looking perspective on their commercialization in the food industry. Full article

Extensive research is underway on a variety of functional foods that support consumer health. A promising combination is milk (a drink with high nutritional value), fortified with spices (naturally rich in antioxidant compounds) and supplemented with low-calorie, health-promoting sweeteners. The aim was to analyze the antioxidant activity (AA), total polyphenol content (TPC), and mineral composition of milk beverages fortified with a mixture of spices and sweeteners and to verify the interactions between these ingredients. Twenty-four variants of milk drinks were prepared with the addition of three types of spice mixtures (1:1) of clove (Cl), cinnamon (Ci), and turmeric (Tu) with the shares of 2.5%, 5%, 7.5%, and 10%, and two types of sweeteners—erythritol (E) and stevia (S)—as well as six control samples, including three 10% aqueous solutions of spice mixtures. AA was measured using the ABTS, FRAP, and DPPH methods. TPC was determined using the Folin–Ciocalteu method. Mineral content (Ca, Mg, Fe, Cu, and Zn) was assessed using the FAAS/FAES method. The highest AA was demonstrated for beverages with Cl-Ci and Cl-Tu, whereas the highest TPC was found in those with Cl-Tu. AA and TPC values increased with the increase in the share of spices in the beverages, and both measurements were significantly higher in beverages with erythritol compared to those with stevia. Despite the 4–5 times lower TPC, 3–8 times higher AA was demonstrated in beverages with the addition of 10% spice mixtures than their corresponding control samples (aqueous solutions with the addition of 10% spice mixtures), which suggests the great role of interactions between nutrients in food. For beverages with 10% Cl-Ci/Cl-Tu mixtures, significantly higher ABTS, FRAP, and DPPH were observed than would result from the simple sum of AA of the components (synergistic effect). The opposite (antagonistic) effect was observed for beverages with Ci-Tu. AA was positively correlated with the content of Fe, Mg, and Cu; negatively with Ca; and not correlated with Zn. The results suggest that the most health-promoting properties are exhibited by the milk drink with the addition of 10% Cl-Tu and erythritol, demonstrating the highest AA and TPC, the strongest synergistic effect of the components, and the highest content of Mg and Zn. This study highlights the importance of carefully selecting and combining ingredients to maximize the antioxidant properties of functional beverages. However, further research is needed to expand knowledge on this issue. Full article

Apple and beetroot pomace flour (APF and BPF), along with two sweeteners, sucrose and a blend of sucrose substitutes (erythritol, stevia, inulin, and fructose), were simultaneously incorporated into three matrices formulated with agar, pectin, or gelatin as gelling agents. The aim was to produce jelly candies with high content of dietary fiber and dietary phenolics, and reduced energy value. The simultaneous incorporation of sucrose substitutes and pomace flour resulted in decrease of Carb:Fiber and Sugar:Fiber Ratio to extremely low values of 2.7–3.4 and 1.3–1.6 respectively, as well as in Energy:Fiber Ratio decrease to 9.2–12.3 kcal/g DF. Relative Antioxidant Capacity Index (RACI), as indicator of antioxidant potential, was calculated by assigning equal weight to Folin–Ciocâlteu, DPPH and FRAP assays applied upon in vitro digestion of 18 formulations of jelly candies. Results obtained for formulations with and without sucrose, as well as with and without APF or BPF, enabled insight into effects of pomace flour addition and sucrose substitution in each gelling matrix on functional properties. The incorporation and the substitution impact on postprandial glucose response were followed in vivo. Their superimposing resulted in glycemic index below 30 and low glycemic load. Efficiency of applied approach in functionalization of confectionery burden with energy and minimization of glucose spike represent an example of agro-residues re-introduction with the highest potential contribution to anti-obesity strategy. Full article

Biscuits are characterized by their popular sweet taste, but they have a poor nutritional profile due to their high sugar and saturated fat content, along with low fibre levels. Their sweetness primarily comes from sucrose, which not only determines the flavour but also performs several technological functions, making it difficult to replace in pastry products. Commercial sweeteners and soluble fibres designed for pastry products are available. Therefore, it is necessary to test the feasibility of using these ingredients in biscuit formulations and assess their impact on biscuit quality. Concurrently, the correlation analysis of dough rheological parameters, structure, and instrumental texture parameters with sensory characteristics will help identify which parameters are strongly correlated and can be used to predict biscuit quality. The purpose of this study was to investigate the dough rheological properties, structure, texture, and sensory characteristics of biscuits in which sucrose was replaced by the commercial sweeteners Tagatesse, maltitol, and erythritol–stevia, with the addition of soluble fibres Nutriose^® FB (wheat fibre) and PromOat 35 (oat fibre). At the same time, a correlation analysis was conducted between dough rheological parameters (stickiness, work of adhesion, dough strength) and biscuit quality parameters, such as water activity, water content, colour, texture (pore area, pore shape, pore elongation), and instrumental texture properties (hardness, brittleness, number of acoustic emission (AE) events, AE event energy), with sensory discrimination evaluated through a consumer test. The use of wheat and oat fibres in combination with sucrose resulted in biscuits with lower apparent density, increased porosity, and weaker texture (fracturability, hardness, number of AE events), yet they had better sensory properties compared to biscuits containing sucrose alone. Replacing sucrose with sweeteners combined with fibres led to a deterioration in the sensory quality of the biscuits and a significant change in the dough’s rheological properties. Regardless of the type of sweetener, biscuits with wheat fibre were rated better than those with oat fibre. Of the tested sweeteners, only maltitol combined with wheat fibre resulted in a sensory quality similar to that of sucrose biscuits. Correlation analysis of all measured biscuit quality parameters showed that only the number of AE events had a strong positive correlation with all tested sensory attributes. Porosity was only correlated with sensory crispness, and fracturability was correlated with sweetness, taste, and overall acceptability. Therefore, it appears that the number of AE events recorded at the time of breaking may be a reliable parameter for predicting biscuit quality. Full article

Fresh highland barley is difficult to store, leading to a lack of commercial products. To address these problems, the research investigated the effect of different heat treatments (steaming <SFB>, microwaving <MFB>, baking <BFB>, and cooking <CFB>) on the quality of fresh highland barley, and used pretreated fresh highland barley as material, combined with the milk tea market, to design and optimize the preparation process of fresh highland barley tapioca pearl and milk tea BOBA. The results showed that the different heat treatments reduced the content of ash and starch significantly, and SFB and MFB decreased the digestibility of fresh highland barley (P < 0.05). In particular, SFB had a significantly higher overall score for fresh barley than the other treatments, with the highest sensory evaluation for aroma, elasticity, and the overall taste of the grain, and the eGI value was the lowest (58.64). The optimal preparation process of fresh highland barley tapioca pearl and milk tea BOBA was designed and optimized by the L₉(34) orthogonal test. The optimal tapioca pearl formula contained the following: apioca starch content of 36%, cooking time of 2.5 min, and erythritol stevia content of 1.5%. The optimal milk tea BOBA formula contained the following: sodium alginate content of 1.3%, erythritol stevia content of 0.6%, and calcium lactate content of 2.2%. This not only improves the comprehensive utilization rate of fresh highland barley, but also provides the accessory food, ensuring a lower eGI and increasing the healthiness and diversity of milk tea. Full article

Recently, the interest in tropical fruits has increased widely even beyond their production areas, but the perishable nature of these fruits makes their marketing difficult. However, due to its special sensory characteristics and nutritional value, lulo (Solanum quitoense Lam.) is a good candidate for product development to meet this ever-growing demand. Therefore, a lulo-powder-based soluble beverage was prepared according to previously established formulations. Thus, the aim of the present research was to obtain the sensory characterization, study consumers’ overall acceptability, and identify drivers of liking for the new beverage. Eight samples were prepared with lulo juice or pulp + stevia, or a sweetener blend (erythritol + xylitol + stevia). Maltodextrin or inulin, as a drying aid, was added to freeze-dry the samples. The freeze-dried samples were rehydrated for consumption. The sensory characterization of the new beverage was carried out by using CATA questions with consumers (n = 69). The most influential attributes that affected acceptability were identified by using ideal product characterization and hedonic scores of the samples. The beverage formulations with stevia alone had the lowest acceptability. Most sensory differences among samples were found between the visual attributes. The attributes “clean”, “homogeneous”, “fruity” and “citrus” odor, “just-right acidity”, “just-right sweetness”, and “fresh” were necessary to increase global acceptance in the juice-only beverages (Js), whereas “cloudy”, “off-odor”, and “very acidic” negatively impacted acceptance. For products with pulp (Ps), “citrus” and “tropical fruit” odors, “just-right acidity”, “just-right sweetness”, and “fresh” attributes were needed to increase acceptance, while “cloudy” and “chemical/artificial” flavors negatively impacted acceptance. The lulo-powder-based soluble beverage was accepted by consumers; however, there is still potential for the sensory-quality improvement of this product. Full article

Lingonberries are considered anot fully exploited major source of antioxidants. Their health benefits are closely linked to their bioavailability. Due to growing health concerns, consumers are looking for jams prepared with sweeteners other than white sugar, which could be a good alternative to meet their needs. The aim of this research was to evaluate the influence of sucrose, fructose, erythritol, brown sugar, coconut sugar, stevia and saccharine on the bioaccessibility of vitamin C, anthocyanins andthe antioxidant capacity of lingonberry jams under in vitro gastrointestinal digestion. The vitamin C, total anthocyanin content and antioxidant capacity measured by ABTS and FRAP assays were determined spectrophotometrically. Individual anthocyanins were determined by high performance liquid chromatography. All analyzed compounds were highly altered during gastrointestinal digestion and this effect was more visible in the case of the anthocyanins. Antioxidant capacity decreased after gastric digestion, but after the gastrointestinal step, radical scavenging capacity increased, while reducing power decreased. Vitamin C bioaccessibility was negatively affected by coconut sugar addition, while stevia addition showed a protective effect. Fructose and sucrose increased the total anthocyanin stability during the intestinal phase. Stevia, fructose and coconut sugar exhibited high protection of the antioxidant capacity of lingonberry jams during digestion. Full article

Reduction or replacement of sucrose while maintaining sweetness in foods is challenging, but today there are many sweeteners with diverse physical and caloric compositions to choose from. The choice of sweetener can be adapted to match reformulation goals whether these are to reduce calories, lower the glycaemic response, provide bulk or meet criteria as a natural ingredient. The current study sought to describe and compare the sweetness intensity dose-response, sweetness growth rate, sweetness potency, and potential for calorie reduction across 16 different sweeteners including sucrose. Sweetness growth rate was defined as the rate of change in sweetness intensity per unit of sweetener concentration. Sweetness potency was defined as the ratio of the concentration of a sweetener to that of sucrose at equivalent sweetness intensity, whereas the potential for calorie reduction is the caloric value of a sweetener compared to sucrose at matched sweetness intensities. Sweeteners were drawn from a range of nutritive saccharide (sucrose, dextrose, fructose, allulose (d-psicose), palatinose (isomaltulose), and a sucrose–allulose mixture), nutritive polyol (maltitol, erythritol, mannitol, xylitol, sorbitol), non-nutritive synthetic (aspartame, acesulfame-K, sucralose) and non-nutritive natural sweeteners stevia (rebaudioside A), luo han guo (mogroside V). Sweetness intensities of the 16 sweeteners were compared with a sensory panel of 40 participants (n = 40; 28 females). Participants were asked to rate perceived sweetness intensity for each sweetener series across a range of concentrations using psychophysical ratings taken on a general labelled magnitude scale (gLMS). All sweeteners exhibited sigmoidal dose-response behaviours and matched the ‘moderate’ sweetness intensity of sucrose (10% w/v). Fructose, xylitol and sucralose had peak sweetness intensities greater than sucrose at the upper concentrations tested, while acesulfame-K and stevia (rebA) were markedly lower. Independent of sweetener concentration, the nutritive sweeteners had similar sweetness growth rates to sucrose and were greater than the non-nutritive sweeteners. Non-nutritive sweeteners on the other hand had higher potencies relative to sucrose, which decreases when matching at higher sweetness intensities. With the exception of dextrose and palatinose, all sweeteners matched the sweetness intensity of sucrose across the measured range (3.8–25% w/v sucrose) with fewer calories. Overall, the sucrose–allulose mixture, maltitol and xylitol sweeteners were most similar to sucrose in terms of dose-response behaviour, growth rate and potency, and showed the most potential for sugar replacement within the range of sweetness intensities tested. Full article