Search Results (40)

Background: Evidence supporting the validity of photogrammetry for assessing body segment alignment remains limited, with most studies focusing on spinal evaluation. Thus, there is a lack of robust research examining its use for other body segments such as the lower limbs. Objective: This study aimed to evaluate the concurrent validity of three photogrammetric methods for measuring knee alignment in the sagittal plane with and without corrections for potential rotational deviations in the participant’s thigh and leg. Methods: A total of 21 adults underwent sequential evaluations involving panoramic radiography of the lower limbs and photogrammetry at a private radiology clinic. Photogrammetric analysis involved identifying the following anatomical landmarks: the greater trochanter of the femur (GTF), the lateral condyle of the femur (LCF), the head of the fibula (HF), and lateral malleolus (LM). Three photogrammetric methods were employed: (1) the condylar angle (CA) defined by the GTF, LCF, and LM points; (2) the fibula head angle (FHA) defined by the GTF, HF, and LM points; and (3) the four-point angle (4PA) incorporating the GTF, LCF, HF, and LM. Concurrent validity was assessed using correlation analysis, agreement with radiographic measurements, and the root mean square error (RMSE). Each photogrammetric method was tested using raw (CA, FHA, and 4PA) and corrected (CAcorr, FHAcorr, and 4PAcorr) values, accounting for thigh and/or leg rotational deviations. Results: Correcting for thigh and leg rotations significantly improved the validity metrics for all methods. The best performance was observed with the corrected condylar angle (CAcorr: r = 0.746; adjusted r² = 0.533; RMSE = 2.9°) and the corrected four-point angle (4PAcorr: r = 0.733; adjusted r² = 0.513; RMSE = 3.0°); however, the measurements presented proportional errors, possible due the method of assessment of rotations. Conclusions: The findings validate the evaluated photogrammetric methods for assessing sagittal knee alignment. Accounting for thigh and leg rotational deviations is critical for achieving accurate measurements, raising the need of accurate tools for measuring rotational changes in the lower limbs to avoid errors. Full article

(1) Background: Condylar fracture healing pattern classification in children and adolescents is primarily based on the radiological assessment of condylar morphology; however, recent studies showed the presence of a poor correlation between post-treatment radiological findings and clinical temporomandibular joint (TMJ) dysfunction. The present case series aimed to correlate the condylar morphology, shape, and trabecular bone density with the skeletal asymmetry and the clinical recovery of two growing patients with unilateral condylar fractures undergoing orthopedic treatment with the Balters Bionator appliance. (2) Methods: Pre- and post-treatment (12 months) cone-beam computed tomography (CBCT) scans of two growing patients with unilateral condylar fracture were retrieved; both patients were treated with the Balters Bionator appliance for one year. Morphological evaluation of the condylar healing pattern was carried out on CBCT reconstructions of the mandible. Condylar remodeling and skeletal asymmetry were assessed through linear measurements performed on pre- and post-treatment CBCT scans; then, fractal analysis (FA) was employed to assess the condylar trabecular bone density on orthopantomographies (OPTs). Clinical and TMJ functional evaluation were retrieved from patients’ records from before and at the end of the treatment (12 months). (3) Results: Conservative treatment of condylar fractures in growing patients led to an increased bone density of the condylar heads, regardless of the post-treatment size and morphology of the injured condyles. Patient one presented an unchanged condylar morphology on the affected side, while patient two’s condyle was slightly spherical. The qualitative results were confirmed by quantitative measurements on CBCTs. The radiological healing patterns were associated with slightly different functional outcomes. Both patients also exhibited an improvement in skeletal asymmetry and TMJ function. (4) Conclusions: According to the findings in the present study, the condylar remodeling and bone apposition after conservative treatment of condylar fractures in growing patients can exhibit different radiological and functional outcomes. Indeed, an unchanged morphology of the condylar head is more likely to determine a physiological TMJ recovery. Full article

Background: The optimal treatment decision for pediatric condylar fractures is influenced by various factors, including the child’s age, fracture type, degree of displacement, and the presence of concomitant injuries. While non-surgical treatments are generally preferred due to high remodeling capacity in children, there remains a lack of comprehensive research comparing the long-term outcomes of open reduction internal fixation (ORIF) versus conservative management. Methods: Retrospective analysis of medical records of 71 pediatric patients (aged 0–18 years) treated for condylar fractures at the Department of Oral and Maxillofacial Surgery, Rambam Healthcare Campus, between 2010 and 2020 was completed. Gender, age, admission date, cause of injury, treatment methods, length of hospital stay, follow-up duration, and follow-up status were studied to help determine association with modality of treatment and complications. Results: No statistically significant differences were seen in complication rates across different age groups, genders, trauma etiologies, fracture sites (head/neck/base), laterality of fractures, nor was there an impact on choice of surgical vs. conservative intervention. Similar length of hospital stay was observed, even in cases with delayed surgical intervention. There was also no statistical significance of injury distribution based on socioeconomic standing. Conclusions: Our research showed similar rates of complications in both surgically treated and conservatively treated cases. This solidifies the importance of practitioner experience, as well as comprehensive anamnesis to help caretakers most effectively determine the optimal treatment for each patient. As the surgical study group is substantially smaller than the conservatively treated group, large-scale prospective studies with extended follow-up will more conclusively help solidify results and establish guidelines. Full article

Background/Aim: The purpose of this study was to reproduce a lateral fall using a computer simulation model and to clarify the circumstances of mandible fracture caused by a lateral impact. Material and methods: Fall scenarios were reconstructed using a computer simulation with finite element models. The fall condition was set as a fall from the head direction, which would cause facial injuries. In each simulation, the effective plastic strain of the mandible and its site were determined. Analysis of variance was performed to determine which factors had a significant effect on the maximum effective plastic strain of the mandible. Results: Significant differences with p-values less than 0.001 were found for the following factors: pitch angle, lateral bending angle, impact object, combination of pitch angle and lateral bending angle, and combination of pitch angle and impact object. In most cases with higher values of effective plastic strain, which can cause mandibular fractures, the site was found at the condylar process or mandibular angle of the attacked side. Conclusion: If the patient falls laterally and their face makes contact with a protruding object, medical professionals can predict fractures of the upper part of the mandibular angle and the condyle of the affected side. Full article

Background: During the routine removal of osteosynthesis materials after surgical treatment (ORIF) of condylar head fractures (CHFs), as performed at our clinic, localised and sometimes pronounced intra-articular scarring were observed quite regularly. This prospective study therefore investigates the causes of intra-articular scarring and its impact on functionality after surgical treatment (ORIF) of condylar head fractures (CHFs). Methods: Moreover, 80/98 patients with 96/114 CHFs (ORIF between 2014 and 2024) were evaluated when performing hardware removal. Statistical analysis used logistic regression and sign tests. Results: Postoperative scarring was seen in 72/96 cases (75%), either localised (n = 54; 56%) or pronounced (n = 18; 19%). Scarring correlated with limitations of laterotrusion for pronounced scarring (p = 0.016; OR = 6.806; 95% CI [1.422, 32.570]; large effect size) and with limitations of mediotrusion for localised scarring (p = 0.013; OR = 0.236; 95% CI [0.076, 0.734]; very small effect size). Factors favouring localised scarring were reduced ipsilateral dental support (p = 0.022; OR = 3.36; 95% CI [1.191, 9.459]; medium effect size) and major fragmentation (p = 0.029; OR = 3.182; 95% CI [1.123, 9.013]; medium effect size). However, there was no correlation between scarring and types (screws w/wo microplates) or number of osteosynthesis materials. Pronounced scarring showed a significantly higher risk for osseous degenerative complications (p = 0.041; OR = 4.171; CI [1.058, 16.452]; medium effect size). Conclusions: Intra-articular scarring after ORIF of CHFs poses a risk for functional limitations and osseous degenerative changes. Early adhesiolysis during the removal of hardware seems favourable for functional outcomes after CHFs. Full article

Background: The purpose of the study was to describe proportional condylectomy in patients with condylar hyperplasia using a titanium 3D-printed ultrathin wire mesh cutting guide placed below the planned bone resection. Methods: Eight patients with condylar hyperplasia underwent proportional condylectomy using an ultrathin titanium 3D-printed cutting guide placed below the planned bone resection. The placement of the guide was facilitated by the incorporation of anatomical landmarks. The accuracy of bone resections guided by such devices was evaluated on postoperative radiographs. The mean postoperative follow-up was 30 months. Results: Surgery could be performed in all patients in the same manner as virtually planned. The fitting accuracy of the cutting guides was judged as good. Postoperative radiographs revealed that the virtually planned shape of the newly formed condylar head after condylectomy could be achieved. Conclusions: In conclusion, the use of virtual computer-assisted planning and CAD/CAM-based cutting guides for proportional condylectomy in unilateral condylar hyperplasia of the mandible offers high accuracy and guarantees very predictable results. Full article

Background: Temporomandibular disorders are common conditions characterized by discomfort within the temporomandibular joints, acoustic changes, and restricted mandibular movement. Accurate diagnosis and subsequent treatment rely heavily on clinical examination, but it is often necessary to add radiological examinations to the diagnostics. Magnetic Resonance Imaging (MRI) is the gold standard for visualizing the disc, while cone-beam computed tomography (CBCT) is primarily used for evaluating condylar morphology. Ultrasound (US) serves as a real-time imaging modality for soft tissues. The objective of the present study was to explore the association between clinical manifestations observed in patients with temporomandibular joint disorders and corresponding radiographic findings. Methods: A total of 63 adult patients (51 female and 12 male) with temporomandibular joint disorders were included in this cross-sectional study. Each patient underwent a clinical examination, followed by appropriate radiological examinations (MRI, CBCT, or US). The level of statistical significance was set at an alpha of 0.05. The Shapiro–Wilk test assessed the normality of numerical variables. The Wilcoxon rank sum test compared two independent groups with non-normally distributed data. Relationships between categorical variables were evaluated using the Pearson chi-square test or Fisher’s exact test. The Kendall tau (τ) method analyzed the correlation between two binary variables. Results: The analysis included 63 patients with TMD, predominantly females (80.95%). Ages ranged from 18 to 74 years with a median of 39 years. In the CBCT study, we observed rarefied changes in the left bone structures in patients with bruxism (p = 0.010). MRI and ultrasound imaging revealed changes in patients with limited jaw opening: erosions in the right mandibular head on ultrasound (p = 0.008) and abnormal right bone structures on MRI (p = 0.009). In CBCT, asymmetry in the left joint space was correlated with a high incidence of right side muscle tension (p = 0.004). Additionally, both CBCT and ultrasound showed a correlation between muscle tension and erosion (p = 0.040 in ultrasound, p = 0.020 in CBCT). Acoustic changes, when compared with radiological imaging, were evident in all three studies, like temporomandibular joint pain or palpation. Conclusions: Our study compared three radiographic imaging methods with clinical examinations to assess their correlation with clinical symptoms. Each imaging technique provided unique insights depending on the specific symptoms presented. The observed correlations varied, highlighting the unique contributions of each modality to the diagnostic process. This underscores the importance of employing multiple diagnostic approaches for a thorough assessment of the temporomandibular joint. However, a limitation of our study is the small sample size and the uneven distribution of participants among the groups. Additionally, not all patients underwent every imaging modality. Full article

Background/Objectives: The aim of this study was to evaluate the function of the treated temporomandibular joint based on the analysis of the image of the articular path using the Cadiax device depending on the choice of treatment method for unilateral condylar fracture of the mandible. Methods: Sixty patients who were treated for condylar fractures of the mandible at the Maxil-lofacial Surgery Department in Katowice were qualified for the analysis of the range of movements of the mandibular heads using the Cadiax device. From the group of patients who suffered fractures of the mandible, including condylar processes, patients were finally qualified for the measurement of the articular path of the injured and healthy joint according to strict criteria. Results: The condylar examination was performed in 20 patients who had conservative condylar fracture treatment and 40 patients who underwent various surgeries in the course of a single condylar fracture. The control group consisted of 20 patients whose mean values for the articular pathway measured for both sides were 12.73 and 12.69 and fell within the standard developed for healthy joints tested with the Cadiax device. Conclusions: We have achieved an almost ideal treatment for condylar fractures. We are also beginning to notice the need for rehabilitation of patients after this type of surgery. Full article

Background: Defects of the ascending ramus of the mandible, including the condylar head and neck or the whole temporomandibular joint (TMJ), are difficult to reconstruct. Reconstruction is mainly based on the use of alloplastic joint prosthesis, costochondral grafting, distraction osteogenesis of the dorsal part of the mandibular ramus, or osseous microvascular flaps of various origin. With the objective of developing a method that overcomes the restrictions of these methods, we recently introduced a sequential chimeric flap consisting of a lateral femoral condyle flap (LFC) and deep circumflex iliac artery flap (DCIA) for reconstruction of up to half of the mandible and the condylar head and neck. Methods: The chimeric flap was used in four patients with the following diagnoses: therapy-refractory osteomyelitis, extended recurrent odontogenic keratozyst, Goldenhar syndrome, and adenocarcinoma of the parotid gland. After a diagnostic workup, LFC and DCIA flaps were harvested in all patients and used in a sequential chimeric design for the reconstruction of the mandibular body and condylar head and neck. Results: Follow-up from at least 24 months up to 70 month after surgery showed a successful reconstruction in all four patients. The LFC provided a cartilaginous joint surface, allowing for a satisfactory masticatory function with a stable occlusion and unrestricted mouth opening and preserved or regained lateral and medial excursions in all patients. The DCIA allowed for a bony reconstruction anatomically resembling a non-atrophied mandibular body. No flap-related complications were observed. Conclusions: The sequential chimeric LFC and DCIA flap is an appropriate method for reconstructing up to half of the mandible and the condylar head and neck. It is suitable in cases where alloplastic joint replacement cannot be used or where other methods have failed. Due to the necessity of harvesting two flaps, the burden of care is increased, and a careful indication is required. The technique is reserved for maxillofacial surgeons who have already gained significant experience in the field of microsurgery. Full article

Unilateral condylar hyperplasia (UCH) is a rare cause of asymmetrical mandibular overgrowth because of the presence of an atypical growth in the affected condyle. SPECT (single-photon emission computed tomography) can easily establish the presence of an atypical, prolonged growth exceeding far beyond normal condylar growth and activity. A CT, CBCT, or LDCT (computed tomography, cone-beam computed tomography, or low-dose computed tomography) can confirm the diagnosis by evaluating the scope of bone overgrowth, mandibular basis/ramus asymmetry, tendency to condylar head enlargement, changes in bone density, and occurrence of differences in condylar head shapes, size, and bone structure. In most cases, a condylectomy is the procedure of choice in growing cases of UCH to remove the pathological condyle and reduce asymmetry levels. Sometimes, the growth is very slow and progressive over time, causing slowly growing asymmetry with similar symptoms to any other mandibular asymmetry, and this causes some troublesome procedures in UCH diagnostics, resulting in patients being underdiagnosed; it can even lead to some relapses in mandibular asymmetry and skeletal malocclusion after previously performed orthodontic and surgical treatment of such discrepancies. When the source of asymmetry is not identified in time, possible inadequate treatment protocols can be used. If any relapse of facial and mandibular asymmetry re-occur, SPECT and CT evaluation are necessary to evaluate if condylar hyperplasia is present and to establish what kind of surgical intervention should be used in each case. Full article

Introduction: Due to the silent manifestation of temporomandibular joint (TMJ), dentists and rheumatologists may neglect treatment for this joint. Aims: The aim of this study was to investigate the TMJ components in patients with various rheumatic diseases and to compare them with a control group based on cone beam computed tomography (CBCT) images. Materials and Methods: This study comprised an assessment of the CBCT images of 65 patients (130 temporomandibular joints) with various rheumatic diseases (mostly rheumatoid arthritis) affecting the TMJ. Moreover, 65 patients (130 temporomandibular joints) with a similar age and gender distribution were examined as the control group. Pathologies were classified into a total of 12 types for the presence of any osseous changes in the condylar head or articular fossa or for joint space narrowing. Statistical analysis of all data was performed with SPSS version 18. The conformity of continuous variables to a normal distribution was examined by the Kolmogorov–Smirnov test. The Mann–Whitney U test was used to compare the means of two independent groups. The Pearson Chi-square test, Yates correction and Fisher’s exact test were used in the analysis of categorical variables. Results: The mean age of the patient and control groups was 50 ± 13 and 48 ± 16, respectively, and no statistically significant difference was found between the patient and control groups in terms of age distribution (p = 0.123). Condylar erosion, condylar flattening, subcondylar sclerosis, osteophytes, subcortical cysts, articular eminence resorption and articular eminence flattening rates were found to be statistically significantly higher in the patient group than in the control group (p < 0.05). Conclusions: Dentomaxillofacial radiologists should examine the bony components of the TMJ in patients with rheumatic diseases, and a multidisciplinary approach involving a dental specialist and rheumatologist is required. Full article

Prolonged operation times should be avoided due to the associated complications and negative effects on the efficiency of the use of operating room resources. Surgical treatment of mandibular condylar head fractures is a well-established routine procedure at our department, nevertheless, we recognized fluctuating operating times. This study aims to pinpoint the influencing factors, in particular the hypothesis whether the efficiency of intraoperative muscle relaxation may decisively affect the duration of surgery. It analyses 168 mandibular condylar head fractures that were surgically treated in the period from 2007 to 2022 regarding the duration of the surgery and potential factors affecting it. The potential predictors’ influence on the dependent variable operation time was mainly calculated as a bivariate analysis or linear regression. Efficiency of relaxation (p ≤ 0.001), fragmentation type (p = 0.031), and fracture age (p = 0.003) could be identified as decisive factors affecting the duration of surgery, as the first surgeon was a constant. In conclusion, surgical intervention should start as soon as possible after a traumatic incident. In addition, a dosage regimen to optimize the efficiency of relaxation should be established in future studies. Fragmentation type and concomitant fractures should also be considered for a more accurate estimation of the operating time. Full article

This study aimed to compare condylar bony pathology in patients with and without temporomandibular joint disorder (TMD) using orthopantomography at Ajman University dental clinics between 2017 and 2021. Patient data from the Ajman University archives were collected after obtaining ethical approval. OPG (orthopantomogram) views were evaluated for potential TMJ pathology. Three independent observers underwent calibration and image analysis, with their agreement level calculated using Kappa statistics (score 0.781). Condylar changes were coded from 0 to 6. Statistical tests such as the Mann–Whitney Test, Kruskal–Wallis test, Spearman’s correlation, and logistic regression analysis were used to analyze the data. The inter-examiner reliability for OPG was 0.903, and intra-examiner reliability was 0.908. The most common condylar bony changes observed in OPG views were flattening and osteophyte. Female participants had a higher prevalence of all bony changes. Temporomandibular Disorder (TMD) can manifest with symptomatic and detectable bony changes in OPG views. The prevalence of temporomandibular disorder appeared similar between genders, but differences were observed regarding the number of teeth lost, with unilateral tooth loss being more common. Interestingly, bruxism did not seem to significantly impact of temporomandibular disorder patients. Full article

The purpose of this retrospective study was to analyze changes in the position of the condyles following mandibular setback surgery with manual guidance. The study included 28 patients with mandibular prognathism who underwent mandibular setback surgery using manual guidance with a bioabsorbable mesh for mandibular fixation, and changes in the position of the center of the condylar head were compared at three time points: before surgery (T0), within 1 week after surgery (T1), and 6 months after surgery (T2). The results showed significant lateral, anterior, and inferior movements of the condyle at T1 compared to T0, with an average movement of 0.66 ± 0.84 mm along the x-axis, −1.27 ± 0.82 mm along the y-axis, and −0.20 ± 0.69 mm along the z-axis, with a 1.77 ± 0.87 mm linear distance (p < 0.05). At T2, the condylar position had mainly changed inferiorly along the y-axis (−0.17 ± 0.48 mm) (p < 0.05) compared to that at T0. The change in the position along the x-axis (−0.14 ± 0.57 mm), z-axis (−0.05 ± 0.68 mm), and linear distance (0.85 ± 0.57 mm) at T2 was not significantly different from that in the condylar position at T0 (p > 0.05). The study suggests that significant anterior–lateral–inferior condylar movement occurs within 1 week after mandibular setback surgery using manual guidance, but the condyle returns to its original position over time, which is clinically acceptable. Full article

This study compared the condylar volume, length, and articular eminence (AE) characteristics of normal individuals to those with unilateral and bilateral juvenile idiopathic osteoarthritis (JOA). The 116 patients were divided into four groups: Control (n = 16), affected condyle of unilateral JOA (Aff-Uni) (n = 36), non-affected condyle of JOA (NonAff-uni) (n = 36), and bilateral JOA (Bilateral) (n = 28). The differences in condyle volume and length and AE were analyzed using ANOVA and Bonferroni post-hoc tests. The results showed that Bilateral had a significantly different condylar volume, especially in the condylar head (p < 0.01), specifically the middle, anterior, and medial parts (p < 0.05). Condylar length also differed among the groups, with differences observed between the control group and the other three groups, as well as between the bilateral group and the other three groups (p < 0.01). AE total volume differed between the control group and Aff-Uni. In the detailed comparison, Aff-Uni and NonAff-Uni were smaller than the control group in the posterior, lateral, and medial sections (p < 0.05). In conclusion, depending on the involvement of unilateral or bilateral JOA, there were differences in condylar volume and AE when compared to the normal control group. Therefore, a prognosis should be evaluated by distinguishing between patients with unilateral and bilateral JOA. Full article