Search Results (203)

The strategic construction of heterojunctions through a simple and efficient strategy is one of the most effective means to boost the photocatalytic activity of semiconductor materials. Herein, a thiazole-linked covalent organic framework (TZ-COF) with large surface area, well-ordered pore structure, and high stability was developed. To further boost photocatalytic activity, the TZ-COF was synthesized in situ on the surface of Cu₂O through a simple multicomponent reaction, yielding an encapsulated composite material (Cu₂O@TZ-COF-18). In this composite, the outermost COF endows the material with abundant redox active sites and mass transfer channels, while the innermost Cu₂O exhibits unique photoelectric properties. Notably, the synthesized Cu₂O@TZ-COF-18 was proven to have the heterojunction structure, which can efficiently restrain the recombination of photogenerated electron–hole pairs, thereby enhancing the photocatalytic performance. The photocatalytic degradation of tetracycline demonstrated that 3-Cu₂O@TZ-COF-18 had the highest photocatalytic efficiency, with the removal rate of 96.3% within 70 min under visible light, which is better than that of pristine TZ-COF-18, Cu₂O, the physical mixture of Cu₂O and TZ-COF-18, and numerous reported COF-based composite materials. 3-Cu₂O@TZ-COF-18 retained its original crystallinity and removal efficiency after five cycles in photodegradation reaction, displaying high stability and excellent cycle performance. Full article

Photocatalytic redox processes significantly contribute to shaping Earth’s surface environment. Semiconductor minerals exhibiting favorable photocatalytic properties are ubiquitous on rock and soil surfaces. However, the sunlight-responsive characteristics and functions of TiO₂, an excellent photocatalytic material, within natural systems remain incompletely understood, largely due to its wide bandgap limiting solar radiation absorption. This study analyzed surface coating samples, determining their elemental composition, distribution, and mineralogy. The analysis revealed enrichment of anatase TiO₂ and β-carotene. Informed by these observations, laboratory simulations were designed to investigate the synergistic effect of β-carotene on the sunlight-responsive behavior of anatase. Results demonstrate that β-carotene-sensitized anatase exhibited a 64.4% to 66.1% increase in photocurrent compared to pure anatase. β-carotene sensitization significantly enhanced anatase’s electrochemical activity, promoting rapid electron transfer. Furthermore, it improved interfacial properties and acted as a photosensitizer, boosting photo-response characteristics. The sensitized anatase displayed a distinct absorption peak within the 425–550 nm range, with visible light absorption increasing by approximately 17.75%. This study elucidates the synergistic mechanism enhancing the sunlight response between anatase and β-carotene in natural systems and its broader environmental implications, providing new insights for research on photocatalytic redox processes within Earth’s critical zone. Full article

Harnessing abundant and renewable solar energy for photocatalytic hydrogen production is a highly promising approach to sustainable energy generation. To realize the practical implementation of such systems, the development of photocatalysts that simultaneously exhibit high activity, cost-effectiveness, and long-term stability is critically important. In this study, a Cd_0.8Zn_0.2S nanowire photocatalytic system decorated with graphene (GR) was prepared by a simple hydrothermal method. The introduction of graphene increased the reaction active area of Cd_0.8Zn_0.2S, promoted the separation of photogenerated charge carriers in the semiconductor, and improved the photocatalytic performance of the Cd₀.₈Zn₀.₂S semiconductor. The results showed that Cd_0.8Zn_0.2S loaded with 5% graphene exhibited the best photocatalytic activity, with a hydrogen production rate of 1063.4 µmol·g⁻¹·h⁻¹. Characterization data revealed that the graphene cocatalyst significantly enhances electron transfer kinetics in Cd₀.₈Zn₀.₂S, thereby improving the separation efficiency of photogenerated charge carriers. This study demonstrates a rational strategy for designing high-performance, low-cost composite photocatalysts using earth-abundant cocatalysts, advancing sustainable hydrogen production. Full article

The use of semiconductors for photocatalytic degradation of organic pollutants has garnered considerable attention as a promising solution to environmental challenges. Compared to TiO₂, BiPO₄ exhibits superior photocatalytic activity. However, its large band gap restricts its light absorption to the UV region. One effective technique for extending BiPO₄’s absorption wavelength into the visible spectrum is the construction of the heterostructure. This study aimed to synthesize monodisperse BiPO₄ nanorods via a solvothermal approach and fabricate BiPO₄/g-C₃N₄ heterojunctions with varying loadings through in situ deposition. Tetracyclines were employed as the target pollutant to evaluate the photocatalytic performance and stability of the prepared materials. The results indicated that 5 wt% of composite exhibited better photocatalytic performance than single catalysts, which showed the highest photodegradation efficiency of approximately 98% for tetracyclines. The prepared bi-photocatalyst presented favorable stability under sunlight irradiation, the photocatalytic activity of which remained almost unchanged after four cycles. The enhanced photocatalytic activity was attributed to the synergistic effect. Additionally, the possible degradation mechanism was elucidated utilizing the semiconductor energy band theory. Overall, this work presents new perspectives on synthesizing innovative and efficient visible-light-driven photocatalysts. It also offers a mechanistic analysis approach by integrating theoretical calculations with experimental observations. Full article

The development of metal–organic framework (MOF)-based composites for photocatalytic hydrogen evolution has garnered significant attention due to their tunable structures, high surface area, and abundant active sites. Recent advancements focus on enhancing light absorption, charge separation, and catalytic efficiency through strategies such as ligand functionalization, metal doping, heterojunction formation, and plasmonic coupling effects. For instance, modifications with Ir (III) complexes and Pt nanoparticles have significantly improved hydrogen evolution rates, while sandwich-structured MOF composites demonstrate optimized charge separation through tailored micro-environments and proton reduction efficiency. Additionally, integrating MOFs with semiconductors (e.g., CdS, g-C₃N₄) or plasmonic metals (e.g., Au) enhances visible-light responsiveness and stability. This review highlights key design principles, performance metrics, and mechanistic insights, providing a roadmap for future research in MOF-based photocatalysts for sustainable hydrogen production. Challenges such as long-term stability and scalable synthesis are also discussed to guide further innovations in this field. Full article

Photocatalytic hydrogen (H₂) production offers a promising solution to energy shortages and environmental challenges by converting solar energy into chemical energy. Hydrogen, as a versatile energy carrier, can be generated through photocatalysis under sunlight or via electrolysis powered by solar or wind energy. However, the advancement of photocatalysis is hindered by the limited availability of effective visible light-responsive semiconductors and the challenges of charge separation and transport. To address these issues, researchers are focusing on the development of novel nanostructured semiconductors and composite materials that can enhance photocatalytic performance. In this paper, we provide an overview of the advanced photocatalytic materials prepared so far that can be activated by sunlight, and their efficiency in H₂ production. One of the key strategies in this research area concerns improving the separation and transfer of electron–hole pairs generated by light, which can significantly boost H₂ production. Advanced hybrid materials, such as organic–inorganic hybrid composites consisting of a combination of polymers with metal oxide photocatalysts, and the creation of heterojunctions, are seen as effective methods to improve charge separation and interfacial interactions. The development of Schottky heterojunctions, Z-type heterojunctions, p–n heterojunctions from nanostructures, and the incorporation of nonmetallic atoms have proven to reduce photocorrosion and enhance photocatalytic efficiency. Despite these advancements, designing efficient semiconductor-based heterojunctions at the atomic scale remains a significant challenge for the realization of large-scale photocatalytic H₂ production. In this review, state-of-the-art advancements in photocatalytic hydrogen production are presented and discussed in detail, with a focus on photocatalytic nanostructures, heterojunctions and hybrid composites. Full article

Due to their unique photocatalytic properties, nanostructured photocatalysts have shown broad prospects for application in environmental treatment. In recent years, researchers have significantly enhanced the photocatalytic charge separation efficiency and photocatalytic stability of photocatalysts by regulating semiconductor energy band structures, optimizing interface and surface properties, constructing heterogeneous structures, and introducing noble metal doping. This review systematically summarizes the basic principles, synthesis methods, and modification strategies of nanostructured photocatalysts and focuses on recent research advances in their environmental applications, such as water pollution control, air purification, and carbon dioxide reduction. Meanwhile, this review analyzes current challenges in the field, such as low quantum efficiency, insufficient stability, and limited industrialization, and outlines future development directions, including smart catalytic technology, fabrication of multifunctional composites, and large-scale synthesis, thereby providing a reference for research and application. Full article

This study explores the efficiency of heterogeneous photocatalysis in wastewater treatment, which is recognized for inducing significant rates of degradation and mineralization of various contaminants, including dyes. The study focuses on the development of an innovative composite via a combination of the sillenite type semiconductor Bi₁₂ZnO₂₀ and the halide-type semiconductor AgI. Both semiconductors were synthesized via co-precipitation, and their phases were identified using X-ray diffraction and characterized by scanning electron microscopy, Raman spectroscopy, Brunauer–Emmett–Teller analysis for specific surface area, UV–Visible diffuse reflectance spectroscopy, and the point of zero charge. The evaluation of the photocatalytic activity of the Bi₁₂ZnO₂₀/AgI heterosystem was carried out by monitoring the degradation process of Basic Blue 41 (BB41) under solar irradiation conditions. The results of this study revealed that the Bi₁₂ZnO₂₀/AgI heterosystem achieved the efficient degradation of BB41, with a removal rate of 98% after 150 min of treatment. The mineralization study showed that the TOC value decreased from 19.89 mg L⁻¹ to 6.87 mg L⁻¹, indicating that a significant portion of BB41 was mineralized. Via kinetic research, it was established that the degradation process followed a pseudo-first-order mechanism. Furthermore, recycling tests showed that the synthesized heterostructures maintained good structural stability and acceptable reusability over several cycles. These findings highlight the potential of heterogeneous photocatalysis as a promising approach to addressing environmental challenges associated with azo dyes. Full article

Metal–organic frameworks (MOFs) have garnered significant attention for water purification in recent years. In particular, UiO-66 (a member of the UiO-MOF family, developed at the University of Oslo) has emerged as a promising water purification material. UiO-66 exhibits excellent adsorption through electrostatic interaction, π–π stacking and Lewis acid–base coordination mechanisms. The photocatalytic degradation property was enhanced through metal doping, composite with semiconductor materials, defect engineering, etc., and the removal efficiency of pollutants was significantly improved. This review systematically describes the structure of UiO-66 and the synthesis methods of UiO-66, including solvothermal, microwave-assisted, mechanized and electrochemical methods, as well as the application of UiO-66 in the adsorption and photocatalytic degradation of various pollutants. Full article

Cu₂O, a narrow-bandgap semiconductor with visible light absorption capabilities, faces limitations in photocatalytic applications due to photocorrosion from hole self-oxidation and insufficient light absorption. In this work, a series of novel spherical Cu₂O/FePO₄ Z-scheme heterojunctions were successfully synthesized via self-assembly to overcome these challenges. The photocurrent, electrical impedance spectroscopy (EIS), and photoluminescence (PL) tests showed that Cu₂O/1.5FePO₄ (CF1.5) had excellent electron hole separation efficiency. Subsequently, photocatalytic degradation was utilized as a probing technique to further confirm the above conclusions, with the kinetic reaction constants of CF1.5 being 2.46 and 11.23 times higher than those of Cu₂O and FePO₄, respectively. After five cycles of experiments and XPS analysis, it was found that the content of Cu(I) in CF1.5 did not significantly decrease after the reaction, indicating that it has superior anti-photocorrosion performance compared to single Cu₂O, which is also due to the establishment of a Z-scheme heterojunction. Systematic studies using radical scavenging experiments and ESR tests identified ·OH and ·O₂⁻ as the main active species involved in photocatalysis. The formation of a Z-scheme heterojunction not only enhances the photocatalytic activity of the CF1.5 composite but also effectively suppresses the photocorrosion of Cu₂O, thereby offering a promising approach for enhancing anti-photocorrosion of Cu₂O. Full article

This research investigates the enhanced photocatalytic activity of cuprous oxide (Cu₂O) nanoparticles (NPs)-titanium dioxide (TiO₂) nanotube (NT) composites for air purification, focusing on the removal of volatile organic compounds (VOCs) and Escherichia coli (E. coli) bacteria under simulated sunny light. Cu₂O-NPs were successfully deposited onto TiO₂-NTs via the successive ionic layer adsorption and reaction method. The resulting p- and n-type semiconductor heterojunction nanocomposites were characterized using various techniques, including scanning electron microscopy, transmission electron microscopy, ultraviolet–visible-light spectroscopy, and chlorinated radicals. The photocatalytic activity was evaluated for different VOCs present in indoor air (butadione, chloroform, and butyraldehyde) in the presence of E. coli bacteria. The results showed that the Cu₂O-NPs/TiO₂-NTs composites exhibited enhanced photocatalytic activity compared to pure TiO₂-NTs. The Langmuir–Hinshelwood model was used to describe the degradation kinetics, revealing that Cu₂O loading and the nature of the target pollutant influence the photocatalytic efficiency. This study has also highlighted the role of chlorinated radicals in the degradation process, especially for chloroform. The degradation process of chloroform generated chlorine radicals, which not only contributed to the degradation of other VOCs, but also enhanced the overall oxidative capacity of the system. This synergistic effect was observed to accelerate pollutant removal and improve the antibacterial efficacy against E. coli. The Cu₂O-NPs/TiO₂-NTs composites demonstrated significant reusability and antibacterial properties, highlighting their potential for sustainable indoor air purification applications. Full article

Utilizing two or more semiconductor materials with distinct geometric and electronic energy arrangements at the nanoscale to construct heterostructures is an important means for developing high-performance catalysts for photocatalytic hydrogen evolution. In this study, ZnIn₂S₄ serves as the primary catalyst carrier, while Mo-W₁₈O₄₉ functions as the cocatalyst supported on the surface of ZnIn₂S₄. A series of ZnIn₂S₄/Mo-W₁₈O₄₉ heterojunction composite materials were synthesized through a straightforward hydrothermal method. The ZnIn₂S₄/Mo-W₁₈O₄₉ photocatalyst demonstrates exceptional photocatalytic hydrogen evolution activity. Notably, with a Mo-W₁₈O₄₉ loading of 10%, the photocatalyst achieves optimal hydrogen evolution, yielding 2592.8 μmol g⁻¹, which is 31 times greater than that of pure ZnIn₂S₄. Further characterized results of the samples showed that loading Mo-W₁₈O₄₉ with an appropriate mass ratio on ZnIn₂S₄ can increase the electron transfer rate, which facilitates reducing the recombination probability of photo-generated electrons and holes, thus improving hydrogen evolution efficiency. Full article

Photocatalytic technology offers significant advantages in addressing water pollution and energy regeneration challenges. Notably, photocatalytic CO₂ reduction technology can convert CO₂ into stable, efficient, and clean carbon compounds such as carbon monoxide, methane, ethylene, and other high-value compounds, providing a novel approach to mitigating the global energy crisis and maintaining the carbon balance. However, traditional semiconductor photocatalytic materials face limitations in photocatalytic degradation and reduction due to their low light energy utilization, severe photocorrosion, rapid photogenerated carrier recombination, and slow electron transport rates. Recent studies have shown that introducing various carrier materials can effectively address these issues. Carrier materials, with their unique properties, enhance semiconductor composite photocatalyst systems, promoting photogenerated carrier separation and improving light energy utilization. This review introduces different carrier materials used in photocatalyst fabrication, systematically explains the preparation strategies for carrier-based composite photocatalysts, and summarizes their applications. Finally, future developments in this field are discussed. This review aims to provide diverse strategies for designing carrier-based photocatalysts, leveraging the special effects of carrier materials to control semiconductor composite modes, interface behaviors, and energy band structures. Full article

The S-Scheme heterojunction design offers a promising pathway to enhance the photocatalytic activity of semiconductors for antibiotic degradation in aquatic environments. Graphitic carbon nitride (g-C₃N₄) stands out due to its robust visible light absorption, exceptional charge separation efficiency, and abundant active sites, rendering it an ideal candidate for sustainable and energy-efficient photocatalysis. This review delves into the potential of g-C₃N₄-based S-Scheme heterojunctions in antibiotic degradation, with a particular emphasis on the photocatalytic principles, inherent advantages, and application prospects. We discuss various semiconductor materials, including metal oxides, multicomponent metal oxides, magnetic oxides, multicomponent magnetic oxides, metal sulfides, and multicomponent metal sulfides, which can be paired with g-C₃N₄ to fabricate S-Scheme heterojunctions. Furthermore, we explore common preparation techniques for synthesizing g-C₃N₄-based S-Scheme heterojunction composites, such as the hydrothermal method, solvothermal method, calcination method, self-assembly method, in situ growth, etc. Additionally, we summarize the applications of these g-C₃N₄-based S-Scheme heterojunctions in the degradation of antibiotics, focusing specifically on quinolones and tetracyclines. By providing insights into the development of these heterojunctions, we actively contribute to the ongoing exploration of innovative technologies in the field of photocatalytic antibiotic degradation. Our findings underscore the vast potential of g-C₃N₄-based S-Scheme heterojunctions in addressing the challenge of antibiotic contamination in water sources. Full article

Fly ash, a primary solid waste product of coal combustion, poses severe threats to human health and the environment due to its massive accumulation. Leveraging the modified porous structure and engineered adsorptive properties of fly ash, its integration with nano-photocatalytic materials can achieve dispersion and stabilization of the photocatalyst, significantly enhancing photocatalytic activity while enabling a synergistic effect between adsorption and photocatalysis. This paper focuses on the issue of agglomeration in semiconductor photocatalytic materials and briefly reviews the preparation methods and applications of modified fly ash-supported photocatalytic materials from both domestic and international perspectives in recent years. Initially, the properties and modification techniques of fly ash are analyzed, with a special emphasis on three methods for preparing fly ash-based photocatalytic composites: the sol-gel method, hydrothermal synthesis, and liquid-phase precipitation. A comparative analysis of the advantages and disadvantages of these three methods is conducted. Furthermore, the performance of the materials and the positive impacts of fly ash-composite photocatalysts are analyzed in terms of applications such as the degradation of pollutants in water, the degradation of NOx and VOCs gaseous pollutants, self-cleaning properties, and CO₂ reduction capabilities. These analyses indicate that fly ash primarily serves as an adsorbent and carrier in these applications. However, as a carrier, fly ash possesses a limited number of active sites, and its modification technology is not yet fully mature. Additionally, research in this area is still in the experimental stage and has not transitioned to engineered production. Therefore, there is a need for continuous improvement in fly ash modification techniques. Furthermore, additional research should be conducted on functional building materials loaded with fly ash-supported photocatalytic materials to enhance their practicality. Full article