Search Results (71)

Objective: Mandibular expansion remains controversial due to concerns about long-term stability and effectiveness. While maxillary expansion protocols are well established, investigations into mandibular expansion remain limited. This study evaluates the efficacy of the Clara Expander appliance for mandibular expansion in early mixed dentition, assessing skeletal and dental changes using cone-beam computed tomography (CBCT). Materials and Methods: This prospective longitudinal study was conducted in Valencia, Spain, with a population of healthy children aged 6–10 years presenting negative osseodental mandibular discrepancies. CBCT scans were performed before and after treatment to evaluate mandibular dimensional changes, with statistical analyses conducted and a significance threshold of p < 0.05. A total of seven subjects were included in this case series, allowing for a descriptive analysis of treatment outcomes within this specific clinical context. Results: CBCT analysis confirmed significant mandibular expansion following the Clara Expander protocol. Post-treatment findings showed statistically significant increases in dental parameters, including Tooth 6 (furcation, MD = −2.25; p = 0.015), Tooth E (furcation, cementoenamel junction, vestibular, lingual, all p < 0.001), Tooth D (all variables significant), and Tooth C (furcation, MD = −4.18; p = 0.002; cementoenamel junction, MD = −3.56; p = 0.015). Conclusions: The Clara Expander appliance effectively promotes skeletal and dental mandibular expansion, with minimal adverse effects. Its user-friendly, non-invasive design enhances patient compliance and outcomes, contributing valuable data to the field of mandibular expansion and informing future research and clinical applications. Full article

Background: Periodontitis is a chronic inflammatory disease influenced by host aging, yet the specific effects of aging on disease susceptibility remain unclear. Objective: This study aimed to evaluate whether aging increases susceptibility to Porphyromonas gingivalis (P. gingivalis)-induced periodontitis in a murine model. We formulated the null hypothesis that age does not affect susceptibility to periodontal bone loss. Methods: Young (8 weeks) and aged (78 weeks) male C57BL/6 mice were randomly assigned into four groups: young control, young infected, old control, and old infected (n = 8 per group, except for old control, where n = 7). Experimental periodontitis was induced by oral application of P. gingivalis suspended in 5% carboxymethylcellulose (CMC), administered every other day, for a total of three applications. Alveolar bone loss was assessed 39 days after the last inoculation using histomorphometric measurement of buccal distance from the cemento-enamel junction to the alveolar bone crest (CEJ–ABC distance) and micro-computed tomography (μCT) at mesial and distal interdental sites. Bonferroni’s correction was applied to the Mann–Whitney U Test to determine statistical significance. A p-value of less than 0.05 was considered statistically significant. Results: Morphometric analysis showed significantly greater buccal bone loss in infected mice versus controls in both age groups (young: 0.193 mm vs. 0.100 mm, p < 0.01; old: 0.262 mm vs. 0.181 mm, p < 0.01). μCT analysis revealed that interdental bone loss was significant only in aged infected mice (mesial: 0.155 mm vs. 0.120 mm, p < 0.05; distal: 0.185 mm vs. 0.100 mm, p < 0.01), and not significant in young infected mice. Conclusions: Aging significantly exacerbates P. gingivalis-induced alveolar bone loss, particularly in interdental regions. These results allowed us to reject the null hypothesis. This study validates a clinically relevant murine model for analyzing age-related periodontitis and provides a foundation for investigating underlying molecular mechanisms and potential therapeutic interventions. Full article

Background/Objectives: Tooth discoloration is a common concern associated with the use of intra-canal medicaments, particularly those containing antibiotics. This study aims to evaluate the tooth discoloration potential of an experimental antibiotic paste modified with Nano Chitosan (APNC) and compare it with two antibiotic pastes and two calcium hydroxide-based pastes over different time intervals. Methods: Fifty bovine incisors were standardized and prepared up to size 60. The teeth were randomly assigned into five groups based on the medicament applied: Metapaste, Metapex, modified Triple Antibiotic Paste (mTAP), Double Antibiotic Paste (DAP), and APNC. A digital spectrophotometer was used to measure the color parameters (L*, a*, and b*) at two zones, above and below the cemento-enamel junction (CEJ), across four-time points: before application (T0- baseline), immediately after application (T1), after two weeks (T2), and after one month (T3). The color changes (ΔE) were calculated and statistically analyzed using repeated-measure ANOVA. Results: Statistically significant differences in discoloration were observed between the tested medicaments after one month (p < 0.05). mTAP caused the highest ΔE values both above and below the CEJ at all time points, particularly after one month (p < 0.05). Conversely, APNC, Metapaste, and DAP demonstrated the least discoloration, with no significant differences among them. The degree of discoloration was time-dependent and more pronounced below the CEJ in all groups. Conclusions: After one month, the experimental APNC paste induced tooth discoloration comparable to that of Metapaste, indicating minimal esthetic compromise. APNC may be a promising alternative to traditional antibiotic pastes with minimal discoloration effects. Full article

Background: The behavior of soft tissues following recession type 1 (RT1) and/or non-carious cervical lesions (NCCLs) treated with class V restorations is not well understood. These conditions cause both functional and esthetic issues. Recent studies show that increased cervical thickness can influence gingival tissue response. This suggests that restoration design has a key impact. This study aims to evaluate the effect of tooth shape modification on gingival tissue response and periodontal health with 3D analysis. Methods: Seven patients with buccal gingival recession and NCCL were selected, resulting in 50 treated teeth. Patients underwent class V buccal restorations using the BOVR technique. Three-dimensional evaluation through scanned dental impressions was performed at baseline and at T1 to monitor tissue profile changes in the buccal zenith sagittal plane. The average observation period was 4 months. Following the assessment, linear measurements were calculated according to standard planes. These measurements aimed to monitor transverse and axial tissue modifications. Probing depth, plaque index, and bleeding index were also recorded. Results: Increased tooth thickness led to tissue alteration. Greater composite thickness was significantly associated with an increase in tissue thickness (p ≤ 0.001) and gingival creeping (p ≤ 0.001) at the free gingival margin. Periodontal health remained unaffected, and 50% of the teeth required no additional surgical treatment due to satisfactory outcomes. Conclusions: Class V restorations that increase cervical thickness may promote soft tissue volume gain over a 4-month period without compromising periodontal health. A 4-month observation period is recommended before considering the surgical correction. Full article

Objective: To assess radiographic changes in the alveolar bone on the distal aspect of the second molars (2Ms) over time, while impacted third molars (ITMs) remain present across two timepoints. Methods: This retrospective observational study aimed to assess radiographic changes between two timepoints (T0 and T1). Both Orthopantomogram (OPG) and Periapical (PA) X-rays were utilized, with three measurements taken on the distal surface of 2Ms using EMAGO 6.1 software. Statistical significance was defined as a p-value < 0.05. Results: A total of 51 patients met the inclusion criteria, with a mean age of 45 years (SD ± 13). Sixty-eight second molars were assessed at baseline (T0) and follow-up (T1), with a mean interval of 20 months (SEM ± 62 days). No significant changes were found in vertical, oblique, or angular bone levels between T0 and T1. Gender significantly affected the cementoenamel junction (CEJ)–base of defect (BD) measurements (p = 0.022) and defect angles at T0 (p = 0.048), but not at the adjusted T1 (p = 0.292). Other variables, including medical history, smoking, and ITM angulation, showed no influence. Patient age was borderline significant in relation to intrabony defect angle (p = 0.047). Conclusions: Considering its limitations, this analysis does not provide evidence to support the hypothesis that prophylactic extraction of ITMs yields significant bone-sparing benefits. Furthermore, it does not establish that prolonged retention of ITMs consistently results in short-term bone alterations in adjacent 2Ms. Consequently, further research is warranted to more accurately assess the medium- to long-term implications of ITM retention on the bone levels of 2Ms. Full article

Objective: This ex vivo study aimed to evaluate the influence of different acquisition protocols, combining voxel size and field of view (FOV), across four cone-beam computed tomography (CBCT) systems, on the accuracy of alveolar bone level measurements for periodontal assessment. Materials and Methods: A dry human mandible was used, with standardized radiopaque markers placed on the cementoenamel junction (CEJ) of the buccal–mesial and buccal–distal aspects of teeth 34 and 43. CBCT scans were performed using four systems—Veraview^® X800, OP300 Pro^®, I-CAT Next Generation^®, and Orthophos XG^®—applying various combinations of field of view (FOV) and voxel resolution available in each device. Reference measurements were obtained in situ using a digital caliper. CBCT images were exported in DICOM format and analyzed with OnDemand3D software (version 4.6) to obtain paracoronal sections. Linear measurements from the CEJ to the alveolar crest were recorded in triplicate and compared to the gold standard using ANOVA and the Dunnett test (α = 0.05). Results: Protocols with smaller voxel sizes and limited FOVs generally yielded measurements closer to the gold standard. However, some larger-FOV protocols with intermediate voxel sizes also achieved comparable accuracy. Among the systems, the I-CAT showed lower agreement within in situ measurements, while others demonstrated reliable performance depending on the acquisition parameters. Conclusions: The findings suggest that CBCT protocols with smaller voxel sizes and reduced FOVs can enhance measurement accuracy in periodontal bone assessments. Nevertheless, intermediate protocols may offer a balance between diagnostic quality and radiation exposure, aligning with the ALADA principle. This study reinforces the need for standardized acquisition parameters tailored to periodontal imaging. Full article

Background/Objectives: Periodontal and implant therapies frequently require soft tissue augmentation for optimal outcomes. As the hard palate serves as the primary donor site, this study evaluated palatal masticatory mucosa thickness variations in a Saudi population of the Eastern Province using cone-beam computed tomography (CBCT) at a teaching dental hospital, providing site-specific data for clinical applications. Methods: A retrospective cross-sectional analysis of 215 CBCT scans from systemically healthy, non-smoking adults (>18 years) was conducted at the University Dental Hospital. Measurements were taken at 12 standardized sites (3 mm, 6 mm, and 9 mm from the cementoenamel junction) across maxillary canines, premolars, and first molars. Statistical analysis included Friedman’s test and t-tests. Results: Significant site variations were observed, with the second premolar region showing greatest thickness (3.48 ± 0.80 mm at 9 mm) and the first molar region the lowest (1.88 ± 0.63 mm at 3 mm) (p < 0.001). Mucosal thickness generally increased coronally to apically (p < 0.001). Age >35 years correlated with significantly thicker mucosa (p < 0.05), while no statistically significant gender-based differences were observed for all sites (p > 0.05). Conclusions: CBCT provides reliable, non-invasive assessment of palatal mucosa thickness. These findings offer region-specific data for consideration in periodontal and implant procedures involving soft tissue grafting. Full article

Background: The optimum bond strength of glass fiber posts can be compromised; it has not yet been established which final irrigant, when used in combination with luting cement, can improve this bond strength. Objectives: This study assessed the effectiveness of 2% chitosan as a final irrigant in combination with different types of luting cement used to improve the bond strength of glass fiber posts bonded to root canal-treated teeth. Methods: Thirty single-rooted anterior teeth were collected and sectioned 2 mm above the most incisal point of the cementoenamel junction. After root canal filling, post spaces were prepared and irrigated in Group I using 17% EDTA for 3 min and in Group II using 2% chitosan for 3 min. Each group was divided into three subgroups: Fiber posts were cemented in subgroup A with Fuji II Cement (resin-reinforced glass ionomer cement), in subgroup B with RelyX Unicem (self-adhesive resin cement), and in subgroup C with Metacem Refill (total-etch resin cement). Push-out bond strength (N) for each sample was measured using a universal testing machine, and the failure mode was assessed with a stereomicroscope at 30× magnification. The fiber post’s morphological structure was analyzed through scanning electron microscopy. Statistical analysis included one-way ANOVA followed by Tukey’s post hoc test in the case of significant differences between the groups. p-Values less than 0.05 were considered statistically significant. Results: This study found no statistically significant difference between using 17% EDTA and 2% chitosan as the final irrigant before post placement (p > 0.05). RelyX Unicem cement showed significant bonding strength when used with 2% chitosan in the coronal, middle, and apical thirds (p = 0.009, p = 0.02, p = 0.01, respectively). Conclusions: Chitosan at 2% can be considered a good alternative to 17% EDTA when used as a final irrigant for the post space. Full article

Background: The aim of this study was to evaluate the clinical and radiological efficacy of minimally invasive surgical techniques for infraosseous defects by evaluating the effects of Emdogain (EMD) applied alone or with a xenograft, with a follow-up period of one year. Methods: Forty patients with a combined total of forty-eight intraosseous defects participated in the research. Of these, 20 participants were treated with EMD (group 1), and 28 were treated with EMD and a xenograft (group 2). The clinical measurements probing depth (PD), recession (REC), and clinical attachment level (CAL) were assessed at six sites on the tooth. Additionally, the following intraoperative clinical measurements were taken: (1) distance from the cementoenamel junction (CEJ) to the bottom of the defect (CEJ-BD) and (2) distance from the CEJ to the most coronal extension of the interproximal bone crest (CEJ-BC). The infraosseous component of the defect was defined as INTRA = (CEJ-BD) − (CEJ-BC). Results: In comparison with the baseline, both treatment options showed statistically significant improvements in reducing PD and increasing CAL. The reduction in PD was 3.25 ± 0.786 mm for group 1 and 3.29 ± 1.013 mm for group 2. In terms of CAL gain, group 1 recorded a value of 4.65 ± 1.387 mm, compared with 5.07 ± 1.631 mm in group 2. Both groups showed a noticeable increase in radiographic bone filler, with an average of 69.85 ± 17.773%. Conclusions: The two regeneration techniques were both effective for the treatment of deep intraosseous defects, encouraging more substantial filling compared with preoperative levels. Full article

Background: Crown lengthening (CL) in esthetic areas has become a versatile procedure with applications in many clinical situations. Knowledge concerning different periodontal phenotypes, and the supracrestal tissue attachment (STA)—former biological width—has allowed for a better understanding of surgical management, allowing for the individualization of surgical therapy. This review presented an individualized surgical approach to CL in esthetic areas based on evaluating the phenotype and current considerations about the STA, correlating them to suggestive surgical techniques. Methods: For an individualized surgical approach, it is primarily necessary to understand STA, including the relationship and distance between the cementoenamel junction (CEJ) and the bone crest (BC) and the position of the free gingival margin (FGM); secondarily, it is necessary to verify the periodontal phenotype to prepare surgical planning (gingivectomy or osseous resection/contouring). Three periodontal phenotypes are recognized, presenting different biological behaviors due to specific characteristics implicitly correlated to soft tissue management. Results: Then, after assessing the distance from the CEJ to the BC, the position of the FGM, and the periodontal phenotype, it is possible to individualize the treatment according to the phenotype. In cases of a thin and scalloped periodontium with delicate gingiva, there might be the presence of bone dehiscence, fenestration, and instability in the healing of the gingival margin, bringing extra attention to tissue manipulation and suggesting a minimally invasive technique (no flap). A partial-thickness flap is recommended for a thick and scalloped periodontium, keeping the periosteum adhered to the bone. For periodontium B (fibrous and dense gingiva and tissue resistant to injuries), the surgical approach recommended is an open full-thickness flap with osteotomy for horizontal and vertical bone volume removal. Then, observing first the specific parameters, such as the STA, CEJ, BC, FGM, and KTW, and then the characteristics of periodontal phenotypes, it is possible to determine the individualized surgical strategy and a reasonable surgical approach to tissue manipulation in clinical CL surgeries. Conclusions: The surgical approach must be defined according to individualized planning since several variables can influence the dynamics of the periodontal tissues. Full article

Background/Objectives: The presence of enamel on the tooth surface is crucial for the long-term success of minimally invasive adhesive restorations such as dental veneers. Our study aims to evaluate the enamel thickness in the incisal, middle, and cervical portions of the labial surface of the upper central incisors using cone beam computed tomography (CBCT). This imaging method provides detailed and accurate three-dimensional images with a low radiation dose, allowing an accurate assessment of enamel thickness. The analysis aims to identify variations in enamel thickness depending on the age and different levels of the labial tooth surface. Methods: 800 CBCT scans performed for diagnostic or therapeutic purposes on patients aged 18–60 years were analyzed. The data were gathered from the imaging archives of private practitioners from Targu Mures and the “George Emil Palade” University of Medicine, Pharmacy, Science, and Technology of Targu Mures. Enamel thickness measurements were conducted using the OnDemand3D Communicator CBCT evaluation program, with subsequent statistical analysis performed using GraphPad Instat Prism software. Results: Results showed significant variation in enamel thickness between the incisal, middle, and cervical segments of the labial surface of the upper central incisors. A decrease in enamel thickness with age has been observed. In patients aged 18–40, mean values of enamel thickness 1 mm and 3 mm above the cementoenamel junction (CEJ) were 0.48 ± 0.092, respectively, 0.819 ± 0.158. In patients over 40, the mean values were 0.454 ± 0.116 and 0.751 ± 0.067 at 1 mm, respectively, 3 mm above the CEJ. Statistically significant differences were found between the two age groups at 1 mm and 3 mm above the CEJ, with p < 0.0001 and p = 0.0214. Conclusions: A statistically significant decrease can be observed in enamel thickness in almost the entire labial surface of the upper central incisors with aging. The varied thickness of the enamel at different tooth levels requires individualized planning for each patient to maximize the long-term aesthetic and functional results. Full article

Objective: Mandibular full-arch distalization (MFD) is a popular approach, particularly in non-extraction cases. However, we still cannot confirm whether facial patterns affect the amount of limits. This study aimed to determine the anatomical MFD limits in patients with different facial patterns. Study design: Using computed tomography (CT), the shortest distances from the mandibular second molar to the inner cortex of the mandibular lingual surface and from the lower central incisor to the inner cortex of the lingual mandibular symphysis were measured in 60 samples (30 patients). The available distalization space in both regions was compared between groups with different facial patterns. Results: The available space in symphysis was more critical than that in retromolar area: the shortest distances to the inner cortex of the lingual mandibular symphysis at root levels 8 mm apical to the cementoenamel junction of the incisor were 1.28, 1.60, and 3.48 mm in the high-, normal-, and low-angle groups, respectively. Conclusions: Facial patterns affected the MFD capacity, and the thickness of the lingual mandibular symphysis was the most critical anatomic limit encountered. Practitioners should always pay attention to the possible impacts from facial patterns, especially in the treatment of high-angle cases. Full article

The severity of periodontitis can be analyzed by calculating the loss of alveolar crest (ALC) level and the level of bone loss between the tooth’s bone and the cemento-enamel junction (CEJ). However, dentists need to manually mark symptoms on periapical radiographs (PAs) to assess bone loss, a process that is both time-consuming and prone to errors. This study proposes the following new method that contributes to the evaluation of disease and reduces errors. Firstly, innovative periodontitis image enhancement methods are employed to improve PA image quality. Subsequently, single teeth can be accurately extracted from PA images by object detection with a maximum accuracy of 97.01%. An instance segmentation developed in this study accurately extracts regions of interest, enabling the generation of masks for tooth bone and tooth crown with accuracies of 93.48% and 96.95%. Finally, a novel detection algorithm is proposed to automatically mark the CEJ and ALC of symptomatic teeth, facilitating faster accurate assessment of bone loss severity by dentists. The PA image database used in this study, with the IRB number 02002030B0 provided by Chang Gung Medical Center, Taiwan, significantly reduces the time required for dental diagnosis and enhances healthcare quality through the techniques developed in this research. Full article

Background: An accurate determination of the biological width and the relationship of the cemento-enamel junction with the border of the alveolar bone is crucial during a clinical crown-lengthening (CCL) procedure. The aim of this study was to present a technical note about the retraction techniques in cone beam computed tomography (CBCT) prior to CCL, highlighting the significant enhancement in procedural accuracy and predictability that these techniques offer. Methods: Clinical and radiological examinations should be performed before a CCL procedure. It is necessary to determine the length of the tooth crowns, the periodontal pockets’ depth, and the phenotype of the gingiva. The ideal CBCT examination should be performed with soft tissue retraction. This can be achieved using retractors or cotton rolls. Results: Retraction of the lips, cheeks, and tongue allows one to assess the marginal gingiva, the cemento-enamel junction, and the alveolar bone. A detailed plan of the CCL procedure, which involves retraction, ensures both the aesthetic appeal and the achievement of a newly defined gingival zenith, enhancing the overall visual harmony. Conclusions: Compared with conventional radiographic imaging, the soft tissue retraction maneuver in CBCT prior to CCL surgery offers an effective approach to the evaluation and diagnosis of soft and hard tissue. This is because of the detailed planning of the aesthetic CCL procedure. Such an approach leads to superior aesthetic outcomes in dentistry, contributing to the advancement of aesthetic dentistry through a harmonious blend of art and science. Full article

Background: To analyze the anatomical characteristics of a posterior area in the mandible localized distally to the second molars and extending in the vestibular direction toward the bony step, which we define as “buccal step”, in a patient with different skeletal patterns for mini-screw insertion. Methods: The sample included 85 CBCT (cone beam computed tomography) records selected from the digital archive. Analysis focused on the buccal step area. Sections were obtained in axial view using reference lines, and measurements of cortical and total bone were taken at specific points M0 (starting point, 6 mm apical from CEJc—cementoenamel junction crest), M2 (located 2 mm posterior to M0 in the apical direction), and M4 (positioned 4 mm posterior to M0 in the apical direction) in both directions. Six measurements were recorded for each scan root plane, assessing cortical and total bone depth. Results: The thickness of the bone increases toward the inside of the mouth at all tested sites (M0, M2, M4), which is good for placing mini-screws. Cortical bone thickness decreases toward the inside of the mouth, with no significant differences among the sites except for M0 vs. M4. People with a particular jaw shape (hypo-divergent) have a thicker cortical bone, indicating that facial structure affects bone thickness. Conclusions: The posterior buccal step insertion site has biomechanical advantages and reduces the risk of damaging roots during mini-screw insertions. Full article