Search Results (9)

This article presents the burned area (BA) product of the Copernicus Climate Change Service (C3S) of the European Commission. This product, named C3SBA10, is based on the adaptation to Sentinel-3 OLCI images of a BA algorithm developed within the Fire Climate Change Initiative (FireCCI) project, which used MODIS data. We first reviewed the adaptation process and then analysed the results of both products for common years (2017–2019). Comparisons were performed using four different grid sizes (0.05°, 0.10°, 0.25°, and 0.50°). Annual correlations between the two products ranged from 0.94 to 0.99. Global BA estimates were found to be more similar when the two Sentinel-3 satellites were active (2019), as the temporal resolution was closer to that of the MODIS sensor. Global validation was performed using reference data derived from Landsat-8 images, following a stratified random sampling design. The C3SBA10 showed commission errors between 16 and 21% and omission errors from 48 to 50%, similar to those found in the FireCCI product. The temporal reporting accuracy was also validated using 19 million active fires. In total, 87% of the detections were made within 10 days after the fire by both products. The high consistency between both products ensures global BA data provision from 2001 to the present. The datasets are freely available through the Copernicus Climate Data Store (CDS) repository. Full article

Quantifying forest fires remain a challenging task for the implementation of public policies aimed to mitigate climate change. In this paper, we propose a new method to provide an annual burned area map of Mato Grosso State located in the Brazilian Amazon region, taking advantage of the high spatial and temporal resolution sensors. The method consists of generating the vegetation, soil, and shade fraction images by applying the Linear Spectral Mixing Model (LSMM) to the Landsat-8 OLI (Operational Land Imager), PROBA-V (Project for On-Board Autonomy–Vegetation), and Suomi NPP-VIIRS (National Polar-Orbiting Partnership-Visible Infrared Imaging Radiometer Suite) datasets. The shade fraction images highlight the burned areas, in which values are represented by low reflectance of ground targets, and the mapping was performed using an unsupervised classifier. Burned areas were evaluated in terms of land use and land cover classes over the Amazon, Cerrado and Pantanal biomes in the Mato Grosso State. Our results showed that most of the burned areas occurred in non-forested areas (66.57%) and old deforestation (21.54%). However, burned areas over forestlands (11.03%), causing forest degradation, reached more than double compared with burned areas identified in consolidated croplands (5.32%). The results obtained were validated using the Sentinel-2 data and compared with active fire data and existing global burned areas products, such as the MODIS (Moderate Resolution Imaging Spectroradiometer product) MCD64A1 and MCD45A1, and Fire CCI (ESA Climate Change Initiative) products. Although there is a good visual agreement among the analyzed products, the areas estimated were quite different. Our results presented correlation of 51% with Sentinel-2 and agreement of r² = 0.31, r² = 0.29, and r² = 0.43 with MCD64A1, MCD45A1, and Fire CCI products, respectively. However, considering the active fire data, it was achieved the better performance between active fire presence and burn mapping (92%). The proposed method provided a general perspective about the patterns of fire in various biomes of Mato Grosso State, Brazil, that are important for the environmental studies, specially related to fire severity, regeneration, and greenhouse gas emissions. Full article

A substantial proportion of Italian students are unaware of the connection between what they learn at school and their work opportunities .This proportion would most likely increase if data were collected today, given the generation of a broad range of new jobs that has arisen due to advancements in technology. This gap between students’ understanding of what they learn at school and its application to the broader world—the society, the economy and the political sphere—suggests there needs to be a rethinking of how teaching and learning at school is conceived and positioned. To help students to approach ongoing social and economic transformations, the Italian Educational Ministry (MIUR) has endorsed a school–work interchange program which, aligned with the principle of open schools, aims to provide students with work experience. It is within the scope of this initiative that we have tested high school students with remote sensing (RS) from space projects. The experience-based approach aimed to verify students’ openness to the use of satellite data as a means to learn new interdisciplinary skills, to familiarize themselves with methodological knowledge and, finally, to inspire them when choosing a university or areas of future work. We engaged three cohorts, from 2017, 2018 and 2019, for a total of 40 h each year, including contact and non-contact time. The framework of each project was the same for the three cohorts and focused on the observation of Earth from space with a specific focus on wildfires. However, the initiative went beyond this, with diverse activities and tasks being assigned. This paper reports the pedagogical methods utilized with the three cohorts and how these methods were transformed and adapted in order to improve and enhance the learning outcomes. It also explores the outcomes for the students, teachers and family members, with respect to their learning and general appreciation. Full article

Observing and understanding changes in Africa is a hotspot in global ecological environmental research since the early 1970s. As possible causes of environmental degradation, frequent droughts and human activities attracted wide attention. Remote sensing of nighttime light provides an effective way to map human activities and assess their intensity. To identify settlements more effectively, this study focused on nighttime light in the northern Equatorial Africa and Sahel settlements to propose a new method, namely, the patches filtering method (PFM) to identify nighttime lights related to settlements from the National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) monthly nighttime light data by separating signal components induced by biomass burning, thereby generating a new annual image in 2016. The results show that PFM is useful for improving the quality of NPP-VIIRS monthly nighttime light data. Settlement lights were effectively separated from biomass burning lights, in addition to capturing the seasonality of biomass burning. We show that the new 2016 nighttime light image can very effectively identify even small settlements, notwithstanding their fragmentation and unstable power supply. We compared the image with earlier NPP-VIIRS annual nighttime light data from the National Oceanic and Atmospheric Administration (NOAA) National Center for Environmental Information (NCEI) for 2016 and the Sentinel-2 prototype Land Cover 20 m 2016 map of Africa released by the European Space Agency (ESA-S2-AFRICA-LC20). We found that the new annual nighttime light data performed best among the three datasets in capturing settlements, with a high recognition rate of 61.8%, and absolute superiority for settlements of 2.5 square kilometers or less. This shows that the method separates biomass burning signals very effectively, while retaining the relatively stable, although dim, lights of small settlements. The new 2016 annual image demonstrates good performance in identifying human settlements in sparsely populated areas toward a better understanding of human activities. Full article

Globally, wildfires are considered the most commonly occurring disasters, resulting from natural and anthropogenic ignition sources. Wildfires consist of burning standing biomass at erratic degrees of intensity, severity, and frequency. Consequently, wildfires generate large amounts of smoke and other toxic pollutants that have devastating impacts on ambient air quality and human health. There is, therefore, a need for a comprehensive study that characterizes land–atmosphere interactions with regard to wildfires, critical for understanding the interrelated and multidimensional impacts of wildfires. Current studies have a limited scope and a narrow focus, usually only focusing on one aspect of wildfire impacts, such as air quality without simultaneously considering the impacts on land surface changes and vice versa. In this study, we use several multisource data to determine the spatial distribution, frequency, disturbance characteristics of and variability and distribution of pollutants emitted by wildfires. The specific objectives were to (1) study the sources of wildfires and the period they are prevalent in sub-Saharan Africa over a 9 year period, i.e., 2007–2016, (2) estimate the seasonal disturbance of wildfires on various vegetation types, (3) determine the spatial distribution of black carbon (BC), carbon monoxide (CO) and smoke, and (4) determine the vertical height distribution of smoke. The results show largest burned areas in December–January–February (DJF), June–July–August (JJA) and September–October–November (SON) seasons, and reciprocal high emissions of BC, CO, and smoke, as observed by Modern-Era Retrospective Analysis for Research and Applications version 2 (MERRA-2) and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). In addition, the results reveal an increasing trend in the magnitude of BC, and CO concentration driven by meteorological conditions such as low precipitation, low relative humidity, and low latent heat flux. Overall, this study demonstrates the value of multisource remotely sensed data in characterising long-term wildfire patterns and associated emissions. The results in this study are critical for informing better regional fire management and air quality control strategies to preserve endangered species and habitats, promote sustainable land management, and reduce greenhouse gases (GHG) emissions. Full article

This paper presents the first global burned area (BA) product derived from the land long term data record (LTDR), a long-term 0.05-degree resolution dataset generated from advanced very high resolution radiometer (AVHRR) images. Daily images were combined in monthly composites using the maximum temperature criterion to enhance the burned signal and eliminate clouds and artifacts. A synthetic BA index was created to improve the detection of the BA signal. This index included red and near infrared reflectance, surface temperature, two spectral indices, and their temporal differences. Monthly models were generated using the random forest classifier, using the twelve monthly composites of each year as the predictors. Training data were obtained from the NASA MCD64A1 collection 6 product (500 m spatial resolution) for eight years of the overlapping period (2001–2017). This included some years with low and high fire occurrence. Results were tested with the remaining eight years. Pixels classified as burned were converted to burned proportions using the MCD64A1 product. The final product (named FireCCILT10) estimated BA in 0.05-degree cells for the 1982 to 2017 period (excluding 1994, due to input data gaps). This product is the longest global BA currently available, extending almost 20 years back from the existing NASA and ESA BA products. BA estimations from the FireCCILT10 product were compared with those from the MCD64A1 product for continental regions, obtaining high correlation values (r² > 0.9), with better agreement in tropical regions rather than boreal regions. The annual average of BA of the time series was 3.12 Mkm². Tropical Africa had the highest proportion of burnings, accounting for 74.37% of global BA. Spatial trends were found to be similar to existing global BA products, but temporal trends showed unstable annual variations, most likely linked to the changes in the AVHRR sensor and orbital decays of the NOAA satellites. Full article

An increasing number of end-users looking for ground data about fire activity in regions where accurate official datasets are not available adopt a free-of-charge global burned area (BA) and active fire (AF) products for applications at the local scale. One of the pressing requirements from the user community is an improved ability to detect small fires (less than 50 ha), whose impact on terrestrial environments is empirically known but poorly quantified, and is often excluded from global earth system models. The newest generation of BA algorithms combines the capabilities of both the BA and AF detection approaches, resulting in a general improvement of detection compared to their predecessors. Accuracy assessments of these products have been done in several ecosystems; but more complex ones, such as regions that are characterized by frequent small fires and steep terrain has never been assessed. This study contributes to the understanding of the performance of global BA and AF products with a first assessment of four selected datasets: MODIS-based MCD45A1; MCD64A1; MCD14ML; and, ESA’s Fire_CCI in a mountainous region of northwest Yunnan; P.R. China. Due to the medium to coarse resolution of the tested products and the reduced sizes of fires (often smaller than 50 ha) we used a polygon intersection assessment method where the number and locations of fire events extracted from each dataset were compared against a reference dataset that was compiled using Landsat scenes. The results for the two sample years (2006 and 2009) show that the older, non-hybrid products MCD45A1 and, MCD14ML were the best performers with Sørensen index (F1 score) reaching 0.42 and 0.26 in 2006, and 0.24 and 0.24 in 2009, respectively, while producer’s accuracies (PA) were 30% and 43% in 2006, and 16% and 47% in 2009, respectively. All of the four tested products obtained higher probabilities of detection when smaller fires were excluded from the assessment, with PAs for fires bigger than 50 ha being equal to 53% and 61% in 2006, 41% and 66% in 2009 for MCD45A1 and MCD14ML, respectively. Due to the technical limitations of the satellites’ sensors, a relatively low performance of the four products was expected. Surprisingly, the new hybrid algorithms produced worse results than the former two. Fires smaller than 50 ha were poorly detected by the products except for the only AF product. These findings are significant for the future design of improved algorithms aiming for increased detection of small fires in a greater diversity of ecosystems. Full article

Global burned area (BA) datasets from satellite Earth observations provide information for carbon emission and for Dynamic Global Vegetation Model (DGVM) benchmarking. Fire patch identification from pixel-level information recently emerged as an additional way of providing informative features about fire regimes through the analysis of patch size distribution. We evaluated the ability of global BA products to accurately represent morphological features of fire patches, in the fire-prone Brazilian savannas. We used the pixel-level burned area from LANDSAT images, as well as two global products: MODIS MCD45A1 and the European Space Agency (ESA) fire Climate Change Initiative (FIRE_CCI) product for the 2002–2009 time period. Individual fire patches were compared by linear regressions to test the consistency of global products as a source of burned patch shape information. Despite commission and omission errors respectively reaching 0.74 and 0.81 for ESA FIRE_CCI and 0.64 and 0.62 for MCD45A1 when compared to LANDSAT due to missing small fires, correlations between patch areas showed R² > 0.6 for all comparisons, with a slope of 0.99 between ESA FIRE_CCI and MCD45A1 but a lower slope (0.6–0.8) when compared to the LANDSAT data. Shape complexity between global products was less correlated (R² = 0.5) with lower values (R² = 0.2) between global products and LANDSAT data, due to their coarser resolution. For the morphological features of the ellipse fitted over fire patches, R² reached 0.6 for the ellipse’s eccentricity and varied from 0.4 to 0.8 for its azimuthal directional angle. We conclude that global BA products underestimate total BA as they miss small fires, but they also underestimate burned patch areas. Patch complexity is the least correlated variable, but ellipse features appear to provide information to be further used for quality product assessment, global pyrogeography or DGVM benchmarking. Full article

The aim of this paper is to investigate how optical and Synthetic Aperture Radar (SAR) data can be combined in an integrated multi-source framework to identify burned areas at the regional scale. The proposed approach is based on the use of fuzzy sets theory and a region-growing algorithm. Landsat TM and (C-band) ENVISAT Advanced Synthetic Aperture Radar (ASAR) images acquired for the year 2003 have been processed to extract burned area maps over Portugal. Pre-post fire SAR backscatter temporal difference has been integrated with optical spectral indices to the aim of reducing confusion between burned areas and low-albedo surfaces. The output fuzzy score maps have been compared with reference fire perimeters provided by the Fire Atlas of Portugal. Results show that commission and omission errors in the output burned area maps are a function of the threshold applied to the fuzzy score maps; between the two extremes of the greatest producer’s accuracy (omission error < 10%) and user’s accuracy (commission error < 5%), an intermediate threshold value provides errors of about 20% over the study area. The integration of SAR backscatter allowed reducing local commission errors from 65.4% (using optical data, only) to 11.4%, showing to significantly mitigate local errors due to the presence of cloud shadows and wetland areas. Overall, the proposed method is flexible and open to further developments; also in the perspective of the European Space Agency (ESA) Sentinel missions operationally providing SAR and optical datasets. Full article