Search Results (25)

Ecotribology focuses on both saving energy resources and reducing environmental pollution. Considering environmental concerns, water-based nanolubricants have gained significant attention over conventional oil-based ones. Non-ecotoxic and highly environmentally friendly nanoadditives were chosen for nanolubricant synthesis, especially considering their use at elevated temperatures. In this study, hexagonal boron nitride nanosheets (hBNNSs) and titanium dioxide nanoparticles (TiO₂ NPs) were used to prepare water-based lubricants with glycerol and surfactant sodium dodecyl benzene sulfonate (SDBS) in water under ultrasonication. An Rtec ball-on-disk tribometer was used to investigate the tribological performance of the synthesised water-based lubricants containing different nano-hBN/TiO₂ concentrations, with dry and water conditions used as benchmarks. The results indicated that the water-based nanolubricant containing 0.5 wt% hBN and 0.5 wt% TiO₂ exhibited the best tribological performance at both ambient (25 °C) and elevated (500 °C) temperatures. This optimal concentration leads to a reduction in the coefficient of friction (COF) by 72.9% and 37.5%, wear of disk by 62.5% and 49%, and wear of ball by 74% and 69% at ambient and elevated temperatures, respectively, compared to that of distilled water. Lubrication mechanisms were attributed to the rolling, mending, tribofilm, solid layer formation, and synergistic effects of hBNNSs and TiO₂ NPs. Full article

Broad lateral size and thickness distributions impede the application of hexagonal boron nitride nanosheets (BNNSs) as friction modifiers in base oil, although they possess remarkable potential for lubrication performance promotion. In this work, a cascade centrifugation-assisted liquid-phase exfoliation approach was presented to prepare BNNSs from hexagonal boron nitride (h-BN) efficiently and scalably. Subsequently, they were ultrasonically dispersed into gas-to-liquid (GTL) base oil, and their lubrication performance promotion was evaluated by a four-ball tribotester. Tribological tests demonstrated that BNNS possesses excellent friction-reducing and anti-wear properties in GTL. Furthermore, the findings indicate that at a BNNS content of 0.8 wt.%, the system displayed the lowest COF and WSD. Particularly, with an addition of 0.8 wt.% BNNS into GTL, the AFC and WSD are reduced significantly by 40.1% and 35.4% compared to pure base oil, respectively, and the surface roughness, wear depth, and wear volume were effectively reduced by 91.0%, 68.5%, and 76.8% compared to GTL base oil, respectively. Raman, SEM-EDS, and XPS results proved that the outstanding friction-reducing and anti-wear properties of BNNS can mainly be ascribed to the presence of physical adsorption film and tribo-chemical film, which were composed of FeOOH, FeO, Fe₃O₄, and B₂O₃. Full article

Hexagonal boron nitride (h-BN) has emerged as a promising dielectric material for protecting metallic substrates such as copper and steel under ambient conditions. The layered structure of h-BN offers significant potential in preventing the oxidation and corrosion of these substrates. Due to their impermeability, boron nitride nanosheets (BNNSs) do not form a galvanic cell with the underlying metals, enhancing their effectiveness as protective coatings. BNNSs are both thermally and chemically stable, making them suitable for coatings that protect against environmental degradation. Additionally, BNNSs have demonstrated excellent fire resistance, hydrophobicity, and oxidation resistance when applied to wood, functioning as a binder-free, retardant coating that remains effective up to 900 °C in air. This review focuses on the anti-corrosion properties of BNNSs, particularly on copper and steel substrates, and discusses various methods for their application. This article also discusses future perspectives in this field, including the innovative concept of wooden satellites designed for short- and long-term missions. Full article

Dielectric materials with superb thermal and electrical properties are highly desired for high-voltage electrical equipment and advanced electronics. Here, we propose a novel strategy to improve the performance of epoxy composites by employing boron nitride nanosheets (BNNSs) and γ-glycidyl ether oxypropyl sesimoxane (G-POSS) as functional fillers. The resultant ternary epoxy composites exhibit high electrical resistivity (1.63 × 10¹³ Ω·cm) and low dielectric loss (<0.01) due to the ultra-low dielectric constants of cage-structure of G-POSS. In addition, a high thermal conductivity of 0.3969 W·m⁻¹·K⁻¹ is achieved for the epoxy composites, which is 114.66% higher than that of pure epoxy resin. This can be attributed to the high aspect ratio and excellent thermally conductive characteristics of BNNSs, promoting phonon propagation in the composites. Moreover, the epoxy composite simultaneously possesses remarkable dynamic mechanical properties and thermal stability. It is believed that this work provides a universal strategy for designing and fabricating multifunctional composites using a combination of different functional fillers. Full article

Obtaining the mechanical properties of boron nitride nanosheets (BNNSs) requires extensive computational atomistic simulations, so it is necessary to predict to reduce time costs. In this work, we obtained the ultimate tensile strength and Young’s modulus of the BNNS material through molecular dynamics (MDs) simulations by taking into account factors, such as the BNNSs’ chirality, layer number, ambient temperature, and strain rate. Subsequently, employing comprehensive training and optimization of the MDs data, we developed multiple ML models to estimate the ultimate tensile strength and Young’s modulus. Among these models, the random forest model was chosen for its accurate prediction of the mechanical properties of the BNNSs, offering significant benefits for performance analysis and the engineering design of two-dimensional nanomaterials resembling BNNSs. Finally, based on the predicted results of the ML models, we propose a predictive model for the mechanical properties of the BNNSs, which serves as a valuable reference for future research endeavors. Full article

There is a dearth of adhesive systems capable of forming stable bonds between restorative materials and tooth surfaces. To address the concern, this study determined the effects of using methacrylate-functionalized boron nitride nanosheets (BNNSs) in a polymeric dental adhesive system. The bisphenol A glycidyl dimethacrylate (BisGMA):2 hydroxyethyl methacrylate (HEMA) (60:40) adhesive monomer blend with a photoinitiator was filled with 0 wt% (control), 0.1 wt%, and 1 wt% BNNSs and light cured. Fourier transform infrared spectroscopy was performed to determine the conversion degree of monomer double bonds (DoC). Water absorption and solubility were measured. Flexural strength and Youngs’s modulus were evaluated to determine the mechanical properties of the composite adhesive system. Finally, dentin bond strength degradation and fracture mode were quantified with a microtensile bond test to confirm the bonding ability of the developed adhesive system. Results showed that the incorporation of BNNSs increased DoC (9.8% and 5.4% for 0.1 and 1 wt%, respectively), but it did not affect water sorption (101.9–119.72 (µg/mm³)), solubility (2.62–5.54 (µg/mm³)), Young’s modulus (529.1–1716.1 MPa), or microtensile bond strength (46.66–54.72 MPa). Further studies are needed with varying BNNS loading percentages from 0.1 wt% to 1 wt% in order to more comprehensively determine the effect of BNNSs on dental adhesives. Full article

Boron nitride nanosheets (BNNSs) exfoliated from hexagonal boron nitride (h-BN) show great potential in polymer-based composites due to their excellent mechanical properties, highly thermal conductivity, and insulation properties. Moreover, the structural optimization, especially the surface hydroxylation, of BNNSs is of importance to promote their reinforcements and optimize the compatibility of its polymer matrix. In this work, BNNSs were successfully attracted by oxygen radicals decomposed from di-tert-butylperoxide (TBP) induced by electron beam irradiation and then treated with piranha solution. The structural changes of BNNSs in the modification process were deeply studied, and the results demonstrate that the as-prepared covalently functionalized BNNSs possess abundant surface hydroxyl groups as well as reliable structural integrity. Of particular importance is that the yield rate of the hydroxyl groups is impressive, whereas the usage of organic peroxide and reaction time is greatly reduced due to the positive effect of the electron beam irradiation. The comparisons of PVA/BNNSs nanocomposites further indicate that the hydroxyl-functionalized BNNSs effectively promote mechanical properties and breakdown strength due to the enhanced compatibility and strong two-phase interactions between nanofillers and the polymer matrix, which further verify the application prospects of the novel route proposed in this work. Full article

This in vitro study evaluated bacterial cell proliferation and biofilm adhesion on titanium discs with and without antibacterial surface treatment to reduce the chances of peri-implant infections. Hexagonal boron nitride with 99.5% purity was converted to hexagonal boron nitride nanosheets via the liquid phase exfoliation process. The spin coating method was used for uniform coating of h-BNNSs over titanium alloy (Ti6Al4V) discs. Two groups of titanium discs were formed: Group I (n = 10) BN-coated titanium discs and Group II (n = 10) uncoated titanium discs. Two bacterial strains, Streptococcus mutans (initial colonizers) and Fusobacterium nucleatum (secondary colonizers), were used. A zone of inhibition test, microbial colony forming units assay, and crystal violet staining assay were used to evaluate bacterial cell viability. Surface characteristics and antimicrobial efficacy were examined by scanning electron microscopy with energy dispersion X-ray spectroscopy. SPSS (Statistical Package for Social Sciences) version 21.0 was used to analyze the results. The data were analyzed for probability distribution using the Kolmogorov-Smirnov test, and a non-parametric test of significance was applied. An inter-group comparison was done using the Mann-Whitney U test. A statistically significant increase was observed in the bactericidal action of BN-coated discs compared to uncoated discs against S. mutans, but no statistically significant difference was found against F. nucleatum. Full article

This paper presents a physical model that provides a comprehensive understanding of the motion behavior of boron nitride nanosheets (BNNSs) immersed in ultrapure deionized water and subjected to a series of nanosecond pulses. In a study conducted by Y. Mi et al. The authors explored the global alignment behavior of BNNSs and fitted the experimental data with an exponential decay function. However, this function lacks clear physical mechanisms and the significance of the fitting parameters remains unclear. To address this issue, we have developed a kinetic model that explicitly describes the underlying physical mechanisms. Furthermore, we propose a simplified mathematical model that not only predicts the displacement of BNNSs but also estimates the total time, velocity, and acceleration of the motion process. Full article

Boron nitride nanosheets (BNNSs) show excellent thermal, electrical, optical, and mechanical properties. They are often used as fillers in polymers to prepare thermally conductive composites, which are used in the production of materials for thermal management, such as electronic packaging. Aside from the van der Waals force, there are some ionic bond forces between hexagonal boron nitride (h-BN) layers that result in high energy consumption and make BNNSs easily agglomerate. To overcome this issue, _L-lysine (Lys) was first employed as a stripping assistant for preparing graft-functionalized BNNSs via mechanical sand-milling technology, and the obtained Lys@BNNSs can be added into thermoplastic polyurethane (TPU) by solution mixing and hot-pressing methods to prepare thermally conductive composites. This green and scalable method of amino acid-assisted sand-milling can not only exfoliate the bulk h-BN successfully into few-layer BNNSs but also graft Lys onto the surface or edges of BNNSs through Lewis acid–base interaction. Furthermore, benefiting from Lys’s highly reactive groups and biocompatibility, the compatibility between functionalized BNNSs and the TPU matrix is significantly enhanced, and the thermal conductivity and mechanical properties of the composite are remarkably increased. When the load of Lys@BNNSs is 3 wt%, the thermal conductivity and tensile strength of the obtained composites are 90% and 16% higher than those of the pure TPU, respectively. With better thermal and mechanical properties, Lys@BNNS/TPU composites can be used as a kind of heat dissipation material and have potential applications in the field of thermal management materials. Full article

Epoxy composites with high thermal conductivity, excellent dielectric, and mechanical properties are very promising for solving epoxy cracking faults in reactors and for extending their service life. In this work, we report on epoxy composites enhanced by ternary fillers of boron nitride nanosheets (BNNSs), multiwalled carbon nanotubes (MWCNTs), and silica (SiO₂) nanoparticles. The obtained BNNSs/MWCNTs/SiO₂/epoxy composites exhibit a high thermal conductivity of 0.9327 W m⁻¹ K⁻¹, which is more than 4-fold higher than that of pure epoxy. In addition, the resultant composites present an improved mechanical strength (from 2.7% of epoxy to 3.47% of composites), low dielectric constant (4.6), and low dielectric loss (0.02). It is believed that the integration of multifunctional properties into epoxy composites provides guidance for optimizing the design of high-performance materials. Full article

Copper matrix composites (CMCs) were prepared by blending Cu particles with boron nitride nanosheets (BNNSs) and then by consolidating the blended particles using spark plasma sintering (SPS). The relative density of the compacts was over 99%, and an intact interface was formed between Cu and the BNNSs. Within the range of the BNNS content studied, its introduction improved microhardness and wear resistance. With the introduction of 0.2 vol% BNNSs, the friction coefficient reduced from 0.15 to merely 0.07, and the wear resistance improved by over 100%. This makes the CMCs reinforced with BNNSs promising materials in applications such as bearings. Full article

High thermal conductivity insulating materials with excellent comprehensive properties can be obtained by doping boron nitride nanosheets (BNNSs) into polyimide (PI). To study the microscopic mechanism of composite material decomposition in an actual working environment and the inhibitory effect of BNNS doping on the decomposition process, molecular dynamics simulations were carried out at high temperatures, in intense electric fields, and with various reactive species in plasma based on the reactive force field (ReaxFF). The results showed that the decomposition was mainly caused by hydrogen capture and adsorption, which broke the benzene ring and C-N bond on the PI chains and led to serious damage to the PI structure. The BNNS filling was shown to inhibit the decomposition of the PI matrix at high temperatures and in intense electric fields. Moreover, the BNNS filling also inhibited the material decomposition caused by ·OH and ·NO. The erosive effect of the positive corona on the PI composites was more obvious than that of the negative corona. In this paper, the microscopic dynamic reaction paths of material pyrolysis in various environments were revealed at the atomic level, and it was concluded that BNNS doping could effectively inhibit the decomposition of PI in various environments. Full article

Liquid-phase exfoliation (LPE) is a widely used and promising method for the production of 2D nanomaterials because it can be scaled up relatively easily. Nevertheless, the yields achieved by this process are still low, ranging between 2% and 5%, which makes the large-scale production of these materials difficult. In this report, we investigate the cause of these low yields by examining the sonication-assisted LPE of graphene, boron nitride nanosheets (BNNSs), and molybdenum disulfide nanosheets (MoS₂ NS). Our results show that the low yields are caused by an equilibrium that is formed between the exfoliated nanosheets and the flocculated ones during the sonication process. This study provides an understanding of this behaviour, which prevents further exfoliation of nanosheets. By avoiding this equilibrium, we were able to increase the total yields of graphene, BNNSs, and MoS₂ NS up to 14%, 44%, and 29%, respectively. Here, we demonstrate a modified LPE process that leads to the high-yield production of 2D nanomaterials. Full article

Dielectric materials with high thermal conductivity and outstanding dielectric properties are highly desirable for advanced electronics. However, simultaneous integration of those superior properties for a material remains a daunting challenge. Here, a multifunctional epoxy composite is fulfilled by incorporation of boron nitride nanosheets (BNNSs) and mesoporous silica coated multi-walled carbon nanotubes (MWCNTs@mSiO₂). Owing to the effective establishment of continuous thermal conductive network, the obtained BNNSs/MWCNTs@mSiO₂/epoxy composite exhibits a high thermal conductivity of 0.68 W m⁻¹ K⁻¹, which is 187% higher than that of epoxy matrix. In addition, the introducing of mesoporous silica dielectric layer can screen charge movement to shut off leakage current between MWCNTs, which imparts BNNSs/MWCNTs@mSiO₂/epoxy composite with high dielectric constant (8.10) and low dielectric loss (<0.01) simultaneously. It is believed that the BNNSs/MWCNTs@mSiO₂/epoxy composites with admirable features have potential applications in modern electronics. Full article