Search Results (6)

Background/Objectives: Biorelevant in vitro dissolution testing is used increasingly to predict complex mechanisms in the gastrointestinal (GI) tract that determine oral bioavailability. However, the limited use of non-compendial systems is driven by the lack of widely accepted, standardized validation frameworks. This ongoing gap continues to restrict their adoption relative to United States Pharmacopeia (USP) apparatus. While the physiological relevance and biopredictive capabilities of the tiny-TIM and TIM-1 in vitro GI models have been demonstrated in previous studies, their inter-laboratory reproducibility has not been systematically established. Therefore, this international ring study evaluates the reproducibility of in vitro simulations of GI transit and absorption of paracetamol in fasted- and fed-state conditions in tiny-TIM and TIM-1. Methods: Three laboratories used TIM-1 and five used tiny-TIM to simulate oral administration of a 500 mg paracetamol solution to a healthy adult. Paracetamol solution was selected as a well-characterized and widely available BCS I compound to minimize formulation and solubility effects and focus on system performance, enabling the generation of a generic validation dataset for the reproducibility of TIM experiments. Results: Paracetamol bioaccessibility profiles were repeatable and reproducible (all pairwise f₂ > 50). Maximum differences in total bioaccessible paracetamol were 0.9% (TIM-1) and 2.8% (tiny-TIM) within laboratories and 3.4 and 5.9% between laboratories. Inter-lab variability at individual time points remained <4.0% (fasted) and 5.2% (fed). Both TIM models produced biopredictive metrics, correctly predicting no food effect on total paracetamol bioaccessibility and capturing delayed t_max. Gastric and intestinal environments showed repeatable pH, temperature, and GI transit characteristics, with fluctuations across transit stages that mirrored reported in vivo patterns. Conclusions: These results demonstrate that TIM systems can reproducibly simulate gastrointestinal conditions across laboratories and generate consistent measurements of drug product performance, despite the complexity of the dynamic processes involved. While this evaluation involving a single BCS I drug solution should not be directly extrapolated to experiments with poorly soluble compounds or different formulations, it supports the use of TIM systems as robust in vitro models in drug product development. This study provides a standardized, inter-laboratory, baseline performance dataset to support regulatory submissions incorporating TIM data and enable more confident interpretation of TIM experiments. Full article

Objectives: Tacrolimus, a Biopharmaceutics Classification System (BCS) class II drug, is widely used for transplant patients to prevent graft rejection. To enhance its bioavailability, amorphous solid dispersion (ASD) formulations were developed and evaluated. The release properties of several ASD-based tacrolimus formulations were studied using an in-house USP IV dissolution method. Methods: The pharmacokinetics of a promising test product were compared with the commercially available Advagraf^® in a pilot clinical bioequivalence study with 12 healthy subjects. A previously published PBPK model for tacrolimus was validated using in vivo data and then applied to predict the human pharmacokinetics of several ASD-based tacrolimus formulations. Results: This study compares the pharmacokinetic (PK) parameters—AUC, Cmax, and Tmax—of Advagraf^® and a test formulation using two methodologies: one incorporating the dissolution profile directly into the PBPK model and the other utilizing the DLM approach. The results show that both methods provided accurate predictions for Cmax and Tmax, with the dissolution profile approach underestimating AUC slightly, while the DLM method predicted AUC adequately. Sensitivity analysis refining the DLM scalars in the Ileum and Colon led to optimized predictions of PK parameters. Furthermore, this study explores the use of PBPK modeling to predict in vivo behavior for additional tacrolimus formulations, highlighting the influence of formulation composition, such as the inclusion of Eudragit-S100, on dissolution profiles and bioavailability. Conclusions: This study evaluates formulations with different compositions and manufacturing characteristics; key factors that could influence their performance in the body were identified. These insights—spanning qualitative, quantitative, and manufacturing aspects—can greatly simplify the development of generic drugs, offering strong evidence of the critical role that physiologically based pharmacokinetic (PBPK) modeling can play in the early phases of generic drug development, especially in designing and assessing biopredictive dissolution methods. Full article

This study aimed to develop a biopredictive dissolution method for desvenlafaxine ER tablets using design of experiments (DoE) and physiologically based biopharmaceutics modeling (PBBM) to address the challenge of developing generic drug products by reducing the risk of product failure in pivotal bioequivalence studies. For this purpose, a PBBM was developed in GastroPlus^® and combined with a Taguchi L9 design, to evaluate the impact of different drug products (Reference, Generic #1 and Generic #2) and dissolution test conditions on desvenlafaxine release. The influence of the superficial area/volume ratio (SA/V) of the tablets was observed, mainly for Generic #1, which presented higher SA/V than the others, and a high amount of drug dissolved under similar test conditions. The dissolution test conditions of 900 mL of 0.9% NaCl and paddle at 50 rpm with sinker showed to be biopredictive, as it was possible to demonstrate virtual bioequivalence for all products, despite their release-pattern differences, including Generic #3 as an external validation. This approach led to a rational development of a biopredictive dissolution method for desvenlafaxine ER tablets, providing knowledge that may help the process of drug product and dissolution method development. Full article

Several locally acting colon-targeted products to treat colonic diseases have been recently developed and marketed, taking advantage of gastrointestinal physiology to target delivery. Main mechanisms involve pH-dependent, time-controlled and/or enzymatic-triggered release. With site of action located before systemic circulation and troublesome colonic sampling, there is room for the introduction of meaningful in vitro methods for development, quality control (QC) and regulatory applications of these formulations. A one-size-fits-all method seems unrealistic, as the selection of experimental conditions should resemble the physiological features exploited to trigger the release. This article reviews the state of the art for bio-predictive dissolution testing of colon-targeted products. Compendial methods overlook physiological aspects, such as buffer molarity and fluid composition. These are critical for pH-dependent products and time-controlled systems containing ionizable drugs. Moreover, meaningful methods for enzymatic-triggered products including either bacteria or enzymes are completely ignored by pharmacopeias. Bio-predictive testing may accelerate the development of successful products, although this may require complex methodologies. However, for high-throughput routine testing (e.g., QC), simplified methods can be used where balance is struck between simplicity, robustness and transferability on one side and bio-predictivity on the other. Ultimately, bio-predictive methods can occupy a special niche in terms of supplementing plasma concentration data for regulatory approval. Full article

Sustained-release (SR) formulations may appear advantageous in first-in-human (FIH) study of innovative medicines. The newly developed SR matrix tablets require prolonged maintenance of API concentration in plasma and should be reliably assessed for the risk of uncontrolled release of the drug. In the present study, we describe the development of a robust SR matrix tablet with a novel G-protein-coupled receptor 40 (GPR40) agonist for first-in-human studies and introduce a general workflow for the successful development of SR formulations for innovative APIs. The hydrophilic matrix tablets containing the labeled API dose of 5, 30, or 120 mg were evaluated with several methods: standard USP II dissolution, bio-predictive dissolution tests, and the texture and matrix formation analysis. The standard dissolution tests allowed preselection of the prototypes with the targeted dissolution rate, while the subsequent studies in physiologically relevant conditions revealed unwanted and potentially harmful effects, such as dose dumping under an increased mechanical agitation. The developed formulations were exceptionally robust toward the mechanical and physicochemical conditions of the bio-predictive tests and assured a comparable drug delivery rate regardless of the prandial state and dose labeled. In conclusion, the introduced development strategy, when implemented into the development cycle of SR formulations with innovative APIs, may allow not only to reduce the risk of formulation-related failure of phase I clinical trial but also effectively and timely provide safe and reliable medicines for patients in the trial and their further therapy. Full article

Montelukast is a weak acid drug characterized by its low solubility in the range of pH 1.2 to 4.5, which may lead to dissolution-limited absorption. The aim of this paper is to develop an in vivo predictive dissolution method for montelukast and to check its performance by establishing a level-A in vitro-in vivo correlation (IVIVC). During the development of a generic film-coated tablet formulation, two clinical trials were done with three different experimental formulations to achieve a similar formulation to the reference one. A dissolution test procedure with a flow-through cell (USP IV) was used to predict the in vivo absorption behavior. The method proposed is based on a flow rate of 5 mL/min and changes of pH mediums from 1.2 to 4.5 and then to 6.8 with standard pharmacopoeia buffers. In order to improve the dissolution of montelukast, sodium dodecyl sulfate was added to the 4.5 and 6.8 pH mediums. Dissolution profiles in from the new method were used to develop a level-A IVIVC. One-step level-A IVIVC was developed from dissolution profiles and fractions absorbed obtained by the Loo–Riegelman method. Time scaling with Levy’s plot was necessary to achieve a linear IVIVC. One-step differential equation-based IVIVC was also developed with a time-scaling function. The developed method showed similar results to a previously proposed biopredictive method for montelukast, and the added value showed the ability to discriminate among different release rates in vitro, matching the in vivo clinical bioequivalence results. Full article