Search Results (30)

Osteoarthritis (OA) is a significant clinical problem that places a substantial burden on both patients and the healthcare system. Characterized by progressive cartilage degeneration, synovial inflammation, and subchondral bone remodeling, OA is a rapidly growing and increasingly studied disease affecting millions around the world. Growing evidence has expanded on the traditional view of OA as a mechanical “wear-and-tear” disease, highlighting that disease progression is driven not only by mechanical stress but also by chronic dysregulation of the osteoimmune environment. Activation of innate and adaptive immune pathways, macrophage M1 polarization, and dysregulated cytokine signaling all contribute to progressive joint degeneration. While current therapeutics often focus on managing symptoms or restoring joint mechanics, interventions often overlook the role of osteoimmunology in disease progression. This review summarizes the biological and bioengineering strategies emerging to address OA. These platforms include bioceramics, metal-based scaffolds, hydrogels, nanoparticles, and microsphere systems. Furthermore, small molecules, cell-based therapies, and gene-modified systems have also been shown to modulate the inflammatory microenvironment, enhance regulatory immune responses, and restore cartilage homeostasis. Together, these approaches represent the evolving research landscape, shifting away from just symptom alleviation and towards targeted disease-modifying therapies, including osteoimmunomodulation. However, significant barriers to clinical translation remain, such as limited large animal studies and species immune system differences, which need to be addressed for the development of clinically applicable interventions. Full article

Fracture nonunion or delayed union remains a significant clinical problem that burdens both the patient and the healthcare system. Defined as failure for bone to unite 9 months post injury or 3 months with no progression toward union, the pathology of nonunion may require multiple surgical interventions with associated morbidity. Increasing evidence has highlighted that nonunion is a multifaceted problem, not only a result of mechanical failure, but also a product of persistent dysregulation of the osteoimmune microenvironment manifested as impaired osteogenesis and bone healing. While current approaches focus on enhanced fixation and various bone grafting strategies, these treatments often fail to coordinate healing with osteoimmune regulation. This review summarizes the emerging biologic and bioengineering approaches that target osteoimmunology to enhance fracture repair. Scaffold systems, including metals, bioceramics, hydrogels, and micro/nanoparticle formulations, are being increasingly engineered to provide structural support while directing macrophage polarization and stimulating osteogenic signaling. We also review cell-based therapies and gene-modified constructs that are being developed to introduce osteoimmunology cues that halt chronic inflammation and promote an osteogenic microenvironment. Full article

Continued efforts have been made to enhance the antibacterial properties of root canal sealers by adding antimicrobial agents to them. This study aims to investigate the antibacterial effect of 0.15% silver nanoparticles (NAg) and 5% dimethylaminohexadecyl methacrylate (DMAHDM) when added to EndoSequence Bioceramic (BC) sealer against Enterococcus faecalis (E. faecalis) biofilm and their impact on its physical properties (flowability and film thickness). Four root canal sealers were tested for flow and film thickness properties, as well as against antibiofilm of E. faecalis-impregnated dentin discs, as follows: group 1: EndoSequence BC sealer only; group 2: EndoSequence BC sealer + 0.15% NAg; group 3: EndoSequence BC sealer + 5% DMAHDM; and group 4: EndoSequence BC sealer + 0.15% NAg + 5% DMAHDM. The findings show that all groups had flow and film thickness values that were in accordance with the ISO requirements. Combining 0.15% NAg and 5% DMAHDM in EndoSequence significantly reduced colony-forming unit (CFU) counts by approximately 5 logs. The combination of NAg and DMAHDM offers a promising strategy for developing endodontic sealers with improved antimicrobial properties and acceptable physical performance. Full article

Hydroxyapatite (HAp) is widely used in biomedical applications due to its biocompatibility, osteoconductivity, and bioactivity. However, its low mechanical strength, tendency toward rapid corrosion, and lack of bactericidal properties present significant limitations in applications. This study aimed to improve the properties of HAp by reinforcing it with multi-walled carbon nanotubes (MWCNTs) and doping it with silver nanoparticles (AgNPs) and silver-core selenium-shell nanoparticles (Ag@SeNPs). Ocimum basilicum extract was used as both a reducing and stabilizing agent in the synthesis of nanoparticles using an environmentally friendly and non-toxic method as an alternative to traditional methods. The synthesized HAp, HAp/MWCNT, Ag-HAp/MWCNT, and Ag@Se-HAp/MWCNT nanocomposites were characterized by TEM, SEM, XRD, Raman spectroscopy, and BET analysis. BET analysis showed a reduction in surface area from 109.4 m²/g for pure HAp to 71.4 m²/g, 47.5 m²/g, and 35.3 m²/g for HAp/MWCNTs, Ag- HAp/MWCNTs, and Ag@Se-HAp/MWCNTs, respectively. Antimicrobial activities against P. aeruginosa, E. coli, S. aureus, E. faecalis, and C. albicans were evaluated. HAp and HAp/MWCNT did not show any antimicrobial activity, while Ag-HAp/MWCNTs showed inhibition zones of 14 mm for Escherichia coli and 18 mm for Pseudomonas aeruginosa at 5 mg/mL. Ag@Se-MWCNTs/HAp exhibited superior efficacy with inhibition zones of 18 mm, 12 mm, and 20 mm for S. aureus, E. faecalis, and Candida albicans, respectively. The incorporation of Ag@SeNPs enhanced HAp’s antibacterial and antifungal properties through a synergistic mechanism. Full article

Biomaterials have assumed a decisive role in modern medicine by enabling significant advancements in medical care practices. These materials are designed to interact with biological systems, offering substantial solutions for various medical needs. In this research, bioceramic materials consisting of a bioactive hydroxyapatite-based matrix with Ti nanoparticles were processed as promising materials. These bioceramics were obtained using mechanical milling, uniaxial pressing, and sintering as powder processing techniques. This study evaluates the effect of Ti additions on the structural, electrochemical, and mechanical properties of the hydroxyapatite ceramic material. Titanium additions were about 1, 2 and 3 wt%. The experimental results demonstrate that the biocomposite’s structure has two hexagonal phases: one corresponding to the hydroxyapatite matrix and the other to the Ti as a reinforced phase. The biomaterials’ microstructure is completely fine and homogeneous. The biomaterial reinforced with 1 wt. % Ti exhibits the best mechanical behavior. In this context, electrochemical tests reveal that bioceramics can achieve stability through an ion adsorption mechanism when exposed to a physiological electrolyte. Bioceramics, particularly those containing 1%Ti, develop their bioactivity through the formation of a high-density hydroxide film during a porous sealing process at potentials around −782.71 mV, with an ionic charge transfer of 0.43 × 10⁻⁹ A/cm². Finally, this biofilm behaves as a capacitor Cc = 0.18 nF/cm², resulting in lower ionic charge transfer resistance (Rct = 1.526 × 106 Ω-cm²) at the interface. This mechanism promotes the material’s biocompatibility for bone integration as an implant material. Full article

The impact of adding silver nanoparticles (AgNPs) to bioceramic (BC) sealer on their ability to penetrate dentinal tubules is still unknown. Thus, this confocal laser scanning microscopic (CLSM) study aimed to assess the extent of dentinal tubule penetration of BC sealer (TotalFill^® Hiflow BC Sealer™, FKG, Switzerland) with and without AgNPs using the single-cone (SC) technique and the continuous-wave condensation (CWC) technique. AgNPs alone as well as in a mixture with the BC sealer were characterized using scanning electron microscopy and transmission electron microscopy. Single-rooted extracted human teeth (N = 100) were selected and prepared, and then divided into four groups (n = 25). Group 1 (BC/SC): BC sealer obturated with the SC technique. Group 2 (BC+AgNPs/SC): BC sealer with AgNPs obturated with the SC technique. Group 3 (BC/CWC): BC Sealer obturated with the CWC technique. Group 4 (BC+AgNPs/CWC): BC Sealer with AgNPs obturated with the CWC technique. After 2 weeks, roots were horizontally sectioned to obtain 1 mm thick dentin slices that were evaluated with CLSM. Sealer dentinal tubule penetration area and the maximum depth of penetration were measured. Data were analyzed with one-way ANOVA and the Tukey multiple comparison tests (p ≤ 0.05). The characterization process demonstrated a spherical-shaped nanoparticles without obvious agglomeration. The results showed that Group 2 (BC+AgNPs/SC) significantly demonstrated the highest mean tubular penetration depth, while group 3 (BC/CWC) had the lowest mean depth. Group 2 (BC+AgNPs/SC) exhibited the significantly highest mean value for the total area of penetration. However, groups 1 (BC/SC) and 3 (BC/CWC) exhibited the lowest mean value of total penetration area, with no statistically significant difference. The integration of AgNPs with BC sealer markedly enhanced penetration into dentinal tubules. The SC technique demonstrated superior penetration relative to the CWC technique. Full article

The aim of this study was to evaluate the bond strength of the calcium silicate-based sealer (CSS) modified with the silver nanoparticles (AgNPs) using the single-cone technique (SC) and the continuous wave condensation (CWC) technique, measured by a universal testing machine. The AgNPs and the modified sealers were characterized by scanning electron microscopy and transmission electron microscopy. One hundred single-rooted extracted human permanent teeth with a single root canal were cleaned and shaped with a Protaper Next system. The teeth were randomly divided into four groups (n = 25) as follows: Group 1, canals were obturated using the SC technique with TotalFill^® BC Sealer. Group 2, canals were obturated using the SC technique with TotalFill^® BC Sealer mixed with AgNPs. Group 3, canals were obturated using the CWC technique with TotalFill^® HiFlow BC Sealer. Group 4, canals were obturated using the CWC technique with TotalFill^® HiFlow BC Sealer mixed with AgNPs. After two weeks, 1 mm-thick dentin slices were cut and exposed to a push-out bond strength test using a universal testing machine. Specimens were examined under a digital microscope to determine the mode of failure. Statistical analysis was performed using ANOVA and Tukey multiple comparison tests (p < 0.05). The nanoparticle characterization revealed a spherical morphology with no obvious aggregations. The results showed that group 4 had the highest dislodgement resistance compared to all groups (p < 0.05). Group 4 was significantly higher in push-out bond strength value than group 1 (p < 0.001) and group 3 (p < 0.003), but not significantly higher than group 2. Cohesive failure was the most prevalent failure mode among all groups. It can be concluded that the incorporation of silver nanoparticles into the calcium silicate-based sealer significantly increased the bond strength. The warm obturation approach demonstrated significantly higher resistance to dislodgment as compared to the single-cone technique. Full article

This study evaluated push-out bond test (POBT), surface roughness, and antimicrobial properties against Enterococcus faecalis of bioceramic sealers supplemented with silver nanoparticles (AgNPs). The sealers tested were CeraSeal^®, EndoSequence^® BC Sealer^TM, and Bio-C^® Sealer. The POBT was measured with a Universal Testing Machine, and the type of failure was evaluated with a stereomicroscope. The roughness average (Sa) and peak–valley height (Sy) values were evaluated by atomic force microscopy. The bacterial growth inhibition was evaluated using a disk diffusion test, and antimicrobial activity was determined with the plate microdilution method. The POBT showed no significant difference between sealers with and those without NPs in cervical and apical thirds (p > 0.05). In the middle third, the adhesion force was significant for Endosequence BC Sealer^® (p < 0.05). The results showed that the Sa and Sy parameters, when AgNPs were added, did not show a statistically significant difference compared to the groups without nanoparticles (p > 0.05). All tested sealers showed bacterial growth inhibition, but no significant difference was found. Their efficacy, in descending order of antibacterial activity when AgNPs were added, is as follows: EndoSequence^® BC Sealer^TM > Bio-C^® Sealer > CeraSeal^®. The incorporation of AgNPs into bioceramics improves antimicrobial activity without affecting mechanical properties. Full article

Magnetic scaffolds (MagSs) are magneto-responsive devices obtained by the combination of traditional biomaterials (e.g., polymers, bioceramics, and bioglasses) and magnetic nanoparticles. This work analyzes the literature about MagSs used as drug delivery systems for tissue repair and cancer treatment. These devices can be used as innovative drugs and/or biomolecules delivery systems. Through the application of a static or dynamic stimulus, MagSs can trigger drug release in a controlled and remote way. However, most of MagSs used as drug delivery systems are not optimized and properly modeled, causing a local inhomogeneous distribution of the drug’s concentration and burst release. Few physical–mathematical models have been presented to study and analyze different MagSs, with the lack of a systematic vision. In this work, we propose a modeling framework. We modeled the experimental data of drug release from different MagSs, under various magnetic field types, taken from the literature. The data were fitted to a modified Gompertz equation and to the Korsmeyer–Peppas model (KPM). The correlation coefficient ($R^2$) and the root mean square error (RMSE) were the figures of merit used to evaluate the fitting quality. It has been found that the Gompertz model can fit most of the drug delivery cases, with an average RMSE below 0.01 and $R^2>0.9$. This quantitative interpretation of existing experimental data can foster the design and use of MagSs for drug delivery applications. Full article

There is an essential clinical need to develop rapid process scaffolds to repair bone defects. The current research presented the development of calcium zirconium silicate/polycaprolactone for bone tissue engineering utilising melt extrusion-based 3D printing. Calcium zirconium silicate (CZS) nanoparticles were added to polycaprolactone (PCL) porous scaffolds to enhance their biological and mechanical properties, while the resulting properties were studied extensively. No significant difference was found in the melting point of the samples, while the crystallisation temperature points of the samples containing bioceramic increased from 36.1 to 40.2 °C. Thermal degradation commenced around 350 °C for all materials. According to our results, increasing the CZS content from 0 to 40 wt.% (PC40) in porous scaffolds (porosity about 55–62%) improved the compressive strength from 2.8 to 10.9 MPa. Furthermore, apatite formation ability in SBF solution increased significantly by enhancing the CZS percentage. According to MTT test results, the viability of MG63 cells improved remarkably (~29%) in PC40 compared to pure PCL. These findings suggest that a 3D-printed PCL/CZS composite scaffold can be fabricated successfully and shows great potential as an implantable material for bone tissue engineering applications. Full article

Inorganic–organic hybrid biomaterials have been proposed for bone tissue repair, with improved mechanical flexibility compared with scaffolds fabricated from bioceramics. However, obtaining hybrids with osteoinductive properties equivalent to those of bioceramics is still a challenge. In this work, we present for the first time the synthesis of a class II hybrid modified with bioactive glass nanoparticles (nBGs) with osteoinductive properties. The nanocomposite hybrids were produced by incorporating nBGs in situ into a polytetrahydrofuran (PTHF) and silica (SiO₂) hybrid synthesis mixture using a combined sol–gel and cationic polymerization method. nBGs ~80 nm in size were synthesized using the sol–gel technique. The structure, composition, morphology, and mechanical properties of the resulting materials were characterized using ATR-FTIR, ²⁹Si MAS NMR, SEM-EDX, AFM, TGA, DSC, mechanical, and DMA testing. The in vitro bioactivity and degradability of the hybrids were assessed in simulated body fluid (SBF) and PBS, respectively. Cytocompatibility with mesenchymal stem cells was assessed using MTS and cell adhesion assays. Osteogenic differentiation was determined using the alkaline phosphatase activity (ALP), as well as the gene expression of Runx2 and Osterix markers. Hybrids loaded with 5, 10, and 15% of nBGs retained the mechanical flexibility of the PTHF–SiO₂ matrix and improved its ability to promote the formation of bone-like apatite in SBF. The nBGs did not impair cell viability, increased the ALP activity, and upregulated the expression of Runx2 and Osterix. These results demonstrate that nBGs are an effective osteoinductive nanoadditive for the production of class II hybrid materials with enhanced properties for bone tissue regeneration. Full article

The ion doping of mesoporous silica nanoparticles (MSNs) has played an important role in revolutionizing several materials applied in medicine and dentistry by enhancing their antibacterial and regenerative properties. Mineral trioxide aggregate (MTA) is a dental material widely used in vital pulp therapies with high success rates. The aim of this study was to investigate the effect of the modification of MTA with cerium (Ce)- or calcium (Ca)-doped MSNs on the biological behavior of human gingival fibroblasts (hGFs). MSNs were synthesized via sol–gel, doped with Ce and Ca ions, and mixed with MTA at three ratios each. Powder specimens were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Biocompatibility was evaluated using a 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay following hGFs’ incubation in serial dilutions of material eluates. Antioxidant status was evaluated using Cayman’s antioxidant assay after incubating hGFs with material disc specimens, and cell attachment following dehydration fixation was observed through SEM. Material characterization confirmed the presence of mesoporous structures. Biological behavior and antioxidant capacity were enhanced in all cases with a statistically significant increase in CeMTA 50.50. The application of modified MTA with cerium-doped MSNs offers a promising strategy for vital pulp therapies. Full article

Polylactic acid (PLA) is widely used in tissue engineering and other biomedical applications. PLA can be modified with appropriate biocompatible ceramic materials since this would allow tailoring the mechanical properties of the tissues to be engineered. In this study, PLA-based non-woven fibrillar nanocomposites containing nanoparticles of hydroxyapatite (HA), a bioceramic commonly used in bone tissue engineering, were prepared via solution blow spinning (SBS). The compositions of the final materials were selected to study the influence of HA concentration on the structure, morphology, and thermal and mechanical properties. The resulting materials were highly porous and mainly constituted fibers. FTIR analysis did not reveal any specific interactions. The diameters of the fibers varied very little with the composition. For example, slightly thinner fibers were obtained for pure PLA and PLA + 10% HA, with fiber diameters of less than 400 nm, while the thicker fibers were found for PLA + 1% HA, with average diameters of 427 ± 170 nm. The crystallinity and stiffness of the PLA/HA composite increased with the HA content. Further, composites containing PLA fibers with slightly larger diameters were more ductile. Thus, with an appropriate balance between factors, such as the diameter of the solution-blow-spun PLA fibers, HA particle content, and degree of crystallinity, PLA/HA composites may be effectively used in tissue engineering applications. Full article

ZrO₂ nanoparticles have received substantially increased attention in every field of life owing to their wide range of applications. Zirconium oxide is a commercially economical, non-hazardous, and sustainable metal oxide having diversified potential applications. ZrO₂ NPs play a vast role in the domain of medicine and pharmacy such as anticancer, antibacterial, and antioxidant agents and tissue engineering owing to their reliable curative biomedical applications. In this review article, we address all of the medical and biomedical applications of ZrO₂ NPs prepared through various approaches in a critical way. ZrO₂ is a bio-ceramic substance that has received increased attention in biomimetic scaffolds owing to its high mechanical strength, excellent biocompatibility, and high chemical stability. ZrO₂ NPs have demonstrated potential anticancer activity against various cancer cells. ZrO₂-based nanomaterials have exhibited potential antibacterial activity against various bacterial strains and have also demonstrated excellent antioxidant activity. The ZrO₂ nanocomposite also exhibits highly sensitive biosensing activity toward the sensing of glucose and other biological species. Full article

Titania and silica have been recognized as potential drug delivery system (DDS) carriers. For this application, controllable biocompatibility and the suppression of the initial burst are required, which can be provided by a calcium phosphate (CP) coating. However, it is difficult to control the morphology of a CP coating on the surface of carrier particles owing to the homogeneous nucleation of CP. In this study, we report the development of a CP-coating method that homogeneously corresponds to the shapes of silica–titania (SiTi) porous nanoparticles. We also demonstrate that controlled surface roughness of CP coatings could be achieved in SBF using SiTi nanoparticles with a well-defined spherical shape, a uniform size, and a tunable nanoporous structure. The precipitation of CP was performed on mono-dispersed porous SiTi nanoparticles with different Si/Ti molar ratios and pore sizes. The pore size distribution was found to significantly affect the CP coating in SBF immersion; the surfaces of the nanoparticles with bimodal pore sizes of 0.7 and 1.1–1.2 nm became rough after CP precipitation, while those with a unimodal pore size of 0.7 nm remained smooth, indicating that these two pore sizes serve as different nucleation sites that lead to different surface morphologies. Full article