Search Results (15)

Changes in preservation conditions act as an important environmental filter driving shifts in microbial communities. However, the precise identities, functional traits, and ecological mechanisms of the dominant agents driving stage-specific deterioration remain insufficiently characterized. This study investigated microbial communities and dominant fungal degraders in waterlogged versus dried bamboo slips using amplicon sequencing, multivariate statistics, and microbial isolation. Results revealed compositionally distinct communities, with dried slips sharing only a small proportion of operational taxonomic units (OTUs) with waterlogged slips, while indicating the persistence of a subset of taxa across preservation states. A key discovery was the dominance of Fonsecaea minima (92% relative abundance) at the water-solid-air interface of partially submerged slips. Scanning electron microscopy (SEM) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) indicate that this fungus forms melanin-rich, biofilm-like surface structures, suggesting enhanced surface colonization and stress resistance. In contrast, the fungal community isolated from dried slips was characterized by Apiospora saccharicola associated with detectable xylanase activity. Meanwhile, the xerophilic species Xerogeomyces pulvereus dominated (99% relative abundance) the storage box environment. Together, these results demonstrate that preservation niches select for fungi with distinct functional traits, highlighting the importance of stage-specific preservation strategies that consider functional traits rather than taxonomic identity alone. Full article

Moso bamboo (Phyllostachys edulis) forest is a key ecosystem and its soil microbial community plays a crucial role in maintaining the ecosystem’s functions, but it is very vulnerable to climate change. An altitude gradient can positively simulate environmental conditions caused by climate change, and hence, it provides an efficient means of investigating the response of soil microorganisms to such climatic changes. However, while previous research has largely concentrated on plant–soil–microorganism interactions across broad altitudinal ranges encompassing multiple vegetation types, studies examining these interactions within a single ecosystem across small altitudinal gradients remain scarce. This study took Moso bamboo forests at different altitudes in Wuyi Mountain, China, as the research object and used high-throughput sequencing technology to analyze the soil microbial community structure, aiming to elucidate the changes in soil microbial communities along the altitude gradient under the same vegetation type and its main environmental driving factors. This study found that the structure of bacterial community was notably different in Moso bamboo forests’ soil at varying altitudes, unlike the fungal community structure, which showed relatively less variance. Bacteria from Alphaproteobacteria phylum were the most dominant (14.71–22.91%), while Agaricomycetes was the most dominating fungus across all altitudinal gradients (18.29–30.80%). Fungal diversity was higher at 530 m and 850 m, while bacterial diversity was mainly concentrated at 850 m and 1100 m. Redundancy analysis showed that soil texture (sand and clay content) and available potassium content were the main environmental factors affecting fungal community structure, while clay content, pH, and available potassium content were the main drivers of bacterial community structure. This study demonstrates that the altitude gradient significantly affects the soil microbial community structure of Moso bamboo forest, and there are differences in the responses of different microbial groups to the altitude gradient. Soil properties are important environmental factors that shape microbial communities. The results of this study contribute to a deeper understanding of the impact of altitude gradient on the soil microbial community structure of Moso bamboo forests, thus providing support for sustainable management of Moso bamboo forests under climate change scenarios. Full article

Bamboo scrimber refers to a lignocellulosic structural material, which is usually attacked by water, ultraviolet radiation and fungus. Surface coating is an effective way to protect it, and its coating properties depend on surface wettability. In this study, the surface wettability of bamboo scrimbers with varying resin content was investigated via the comprehensive analysis of surface roughness, surface contact angle, surface free energy, surface chemical composition and coating properties. The resultant scrimbers had a similar profile with low roughness. Their surface was hydrophilic, but the hydrophilicity decreased with the increase in resin content. High resin content gave rise to low total free energy, in which the Lifshitz–van der Waals component was dominant and it decreased with the increasing resin content. Meanwhile, the ratio of the electron-accepting component to the electron-donating component becomes higher. This was due to the decreasing hydrophilic groups (e.g., -OH and -COOH groups) and the increasing oxygen-free groups (e.g., C-H and -CH₂ groups) on the scrimber surface. The resin content affected the adhesion by decreasing the surface wettability, but the coating adhesion still reached the level of 2 for all bamboo scrimbers. The results will provide a theoretical reference for the surface coating of bamboo scrimbers in the structural application for good coating durability. Full article

With natural texture and high performance, bamboo scrimber is one of the artificial lignocellulosic composites widely used in construction, furniture and other structural applications. However, it is vulnerable to the actions of water, ultraviolet radiation and fungus, which affect its durability, especially in the open. Here, bamboo was treated with superheated steam in an attempt to improve the durability of bamboo scrimbers. The chemical composition, mechanical properties, dimensional stability, aging resistance, decay resistance and anti-mildew properties were investigated at different temperatures (160~200 °C). After superheated steam treatment, the relative contents of holocellulose and α-cellulose in bamboo decreased. The bending strength and short-beam shearing strength slightly decreased as the temperature was raised while the modulus was essentially retained. The aging resistance in terms of thickness swelling rate (≤9.38%) was substantially improved. The decay resistance reached to the level of Grade I and can be dramatically enhanced by elevating temperature. The anti-mildew properties were also improved. To take together, superheated steam treatment remarkably improves the resistance of bamboo scrimbers to water, ultraviolet radiation, rot fungi and mildew with some concomitant reduction in mechanical properties. The results will permit outdoor construction using bamboo scrimbers more resistant to environmental damage. Full article

Bamboo is a material with good tensile and flexural resistance. As a construction material with structural capacity, using bamboo implies considerable environmental advantages in relation to other typical materials such as steel or concrete. For its correct implementation, it is necessary to define its mechanical properties and durability. Bamboo is susceptible to degradation due to the lack of natural toxins and thin walls, which means that shallow decomposition processes can imply appreciable reductions in its mechanical capacity. The main degrading agents considered in this study were beetles, termites, and xylophagous fungi. The aim of this study was to analyze the durability of three different species: DS, PA, and AA. Durability and mechanical tests results after 6 months of exposure to biotic and abiotic agents were compared with their original properties and chemical composition. In this study, durability was analyzed in two ways. Firstly, the loss of mass due to fungal infection was investigated. The results obtained were based on the standard EN 113 using the fungus CP. Secondly, bending and compressive strength was evaluated after a durability test according to the standard EN 335:2013 for the CU3.1 use class after a 6 month period in the city of Donostia/San Sebastian, Spain. The DS and AA varieties were rated as very durable CD1, while the PA variety is durable CD2, thus proving to be an attractive material for construction. Full article

A natural polyphenolic compound was used to assemble nanocomposites. Owing to its stable bioactive properties, bamboo has earned significant attention in material science. Its high nutrient content and hydrophilicity makes bamboo more vulnerable to mold attacks and shortened shelf lives. To produce efficient, multipurpose, long-life bamboo products, a novel technique involving an immersion dry hydrothermal process was applied to impregnate the bamboo with polyphenol-assisted silver-reduced graphene oxide nanosheets. Curcumin (Cur), a natural polyphenol found in the rhizome of Curcuma longa, was used in the preparation of curcumin-enhanced silver-reduced graphene oxide nanosheets (Cur-AgrGONSs). The nanocomposites and nanocomposite-impregnated bamboo materials were examined by field emission scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. At the same time, a phytopathogen was isolated from infected bamboo products and identified by internal transcribed spacer (ITS) sequences. The nanocomposites effectively inhibited the growth of the isolated fungus. The mold resistance and moisture content of both the treated and untreated bamboo timbers were also examined to determine the efficiency of the prepared nanocomposite. The antifungal activity and hydrophobicity of the bamboo materials were significantly enhanced after the incorporation of curcumin-enriched silver-loaded reduced graphene oxide nanosheets (B@Cur-AgrGONSs). This research outcome confirms that the nanocomposite is a well-organized antimicrobial material for different advanced domains. Full article

Recently, many control methods have been tried and applied in the Fusarium wilt disease control of banana and have achieved definite progresses. In this study, by using ‘Zhongjiao No.3’ and ‘Zhongjiao No.4’ banana seedlings as materials, the effects of Serendipita indica and bamboo fungus (Dictyophorae echinovolvata) culture substrates on the growth and Fusarium wilt disease resistance of banana were investigated. Results showed that the plant height, leaf length, leaf width, root length and root thickness, aboveground part fresh weight, root fresh weight, and relative chlorophyll content and nitrogen content in leaves of banana seedlings colonized with S. indica were all greater than those of non-colonized controls, while these parameters of banana seedlings grown in nutrient soil containing D. echinovolvata culture substrates were significantly suppressed. Both S. indica non-colonized and colonized seedlings cultivated in nutrient containing 1/4 D. echinovolvata culture substrates showed much milder symptoms compared with those cultivated in normal nutrient soil, indicating that the addition of bamboo fungus substrates to the soil can enhance the Fusarium wilt resistance of banana. The results obtained in this study can provide a basis for the application of S. indica and bamboo fungus in the prevention and control of banana Fusarium wilt disease. Full article

Bamboo is much more easily attacked by fungus compared with wood, resulting in shorter service life and higher loss in storage and transportation. It has been long accepted that the high content of starch and sugars in bamboo is mainly responsible for its low mould resistance. In this paper, acetic acid, propionic acid, oxalic acid, citric acid, and hydrochloric acid were adopted to hydrothermally hydrolyze the starch in bamboo, with the aims to investigate their respective effect on the mould and blue-stain resistance of bamboo, and the optimized citric acid in different concentrations were studied. The starch content, glucose yields, weight loss, and colour changes of solid bamboo caused by the different acidic hydrolysis were also compared. The results indicated that weak acidic hydrolysis treatment was capable of improving mould-resistant of bamboo. The mould resistance increased with the increased concentration of citric acid. Bamboo treated with citric acid in the concentration of 10% could reduce the infected area ranging to 10–17%, the growth rating of which could reach 1 resistance. The content of soluble sugar and starch remained in bamboo decreased significantly from 43 mg/g to 31 mg/g and 46 mg/g to 23 mg/g, respectively, when the citric acid concentration varied from 4% to 10%. Citric acid treatments of 10% also caused a greatest surface colour change and weight loss. The results in this study demonstrated citric acid treatment can effectively reduce the starch grain and soluble sugars content and improve mould resistance of bamboo, which can be attributed to the reduction of starch grain and soluble carbohydrates (such as glucose, fructose, and sucrose, etc.) in bamboo. Full article

Hypocrellin is a natural 3,10-xylene-4,9-anthracene derivative compound that originates from the stroma of Shiraia bambusicola (S. bambusicola) and Hypocrella bambusae with excellent photobiological activities. Submerged fermentation with the mycelia of S. bambusicola is generally regarded as an ideal technology for hypocrellin production. This study developed a co-cultivation strategy for an obvious promotion of the hypocrellin yield by incubating S. bambusicola (GDMCC 60438) with the endophyte fungus Arthrinium sp. AF-5 isolated from the bamboo tissue. The results indicated that the yield of hypocrellin A (HA) reached a 66.75 mg/g carbon source after an 84-h co-cultivation of the two strains, which was a four-time increase of that by the fermentation only with the S. bambusicola. The microscope observation found that the mycelia of the two strains were intertwined with each other to form the mycelium pellets during the co-cultivation. Moreover, the mycelium pellets of the co-culture showed a contracted and slightly damaged morphology. The addition of H₂O₂ in the fermentation media could further increase the HA production by 18.31%. Full article

The coagulating properties of wood vinegar from para rubber wood, bamboo, and coconut shell used as a substitute for acetic acid in the production process of natural rubber (NR) sheets were investigated and considered. For the dirt and volatile content, the tensile strength at break, the percentage of elongation at break, and the 300% modulus, the results showed that the types of wood vinegar coagulants were not significantly different from acetic acid. However, the Mooney viscosity and plasticity retention index (PRI) properties were significantly different from those of acetic acid. The NR sheet temperature increased rapidly during the first hour after the drying process started due to heat transfer from the hot air. Afterward, the temperature of the NR sheet samples began to stabilize. When the drying process started, the drying temperature was increased, so the trend was reducing the drying time. For the yellowness index (YI) value, the increase in the YI value was related to the type of coagulating material, the increase in the airspeed, and the drying temperature. The dried sheet samples using para rubber wood vinegar as the coagulating material had a color value at the same level as acetic acid and the referent. However, the bamboo and coconut shell wood vinegars were at a lower level. In comparing the YI value data between the experimental results and prediction values, the second-degree model had a better fit in prediction than the zero-degree and first-degree models. This result was confirmed by the higher mean of the coefficient of determination. The dried sheet product coagulated by using wood vinegar had fungus growth prior to supplying it to the customer. Full article

A round-the-clock photocatalyst with energy-storage ability has piqued the interest of researchers for removing microbial contaminants from indoor environments. This work presents a moderate round-the-clock method for inhibiting the growth of fungus spores on bamboo materials using Ag-modified TiO₂ thin films. Photoactivated antifungal coating with catalytic memory activity was assembled on a hydrophilic bamboo by first anchoring anatase TiO₂ thin films (TB) via hydrogen bonding and then decorating them with Ag nanoparticles (ATB) via electrostatic interactions. Antifungal test results show that the Ag/TiO₂ composite films grown on the bamboo surface produced a synergistic antifungal mechanism under both light and dark conditions. Interestingly, post-illumination catalytic memory was observed for ATB, as demonstrated by the inhibition of Aspergillus niger (A. niger) spores, in the dark after visible light was removed, which could be attributed to the transfer of photoexcited electrons from TiO₂ to Ag, their trapping on Ag under visible-light illumination, and their release in the dark after visible light was removed. The mechanism study revealed that the immobilized Ag nanoparticles served the role of “killing two birds with one stone”: increasing visible-light absorption through surface plasmon resonance, preventing photogenerated electron–hole recombination by trapping electrons, and contributing to the generation of ●O₂⁻and ●OH. This discovery creates a pathway for the continuous removal of indoor air pollutants such as volatile organic compounds, bacteria, and fungus in the day and night time. Full article

The objective of this study was to evaluate various physical and mechanical properties of experimental particleboard panels made from Asian giant bamboo (Dendrocalamus asper). Single layer panels having a density level of 0.75 g/cm³ from coarse and fine particles were used within the scope of this study. Thickness swelling, water absorption, surface roughness, and wettability characteristics of the samples were tested as physical properties while bending, internal bond strength, and screw withdrawal strength of the panels were considered for their mechanical properties. Resistance of the panels against termite and fungus were also determined. Based on the findings in the work both physical and mechanical properties of the panels made from coarse particles resulted in higher values than those made from fine particles with the exception of their internal bond strength. It appears that using fine particles in the panels enhanced their overall surface quality as well as wettability. Regarding biological deterioration of the samples, those made with coarse particles had better resistance. It seems that giant bamboo as a non-wood lignocellulosic species would have potential to be used as raw material to the manufacture value added particleboard with accepted characteristics. Full article

We report the synthesis of nitrogen-doped hierarchical meso/microporous carbon using renewable biomass bamboo fungus as precursor via two-step pyrolysis processes. It is found that the developed porous carbon (NHPC-800) features honeycomb-like cellular framework with well-developed porosity, huge specific surface area (1708 m² g⁻¹), appropriate nitrogen-doping level (3.2 at.%) and high mesopore percentage (25.5%), which are responsible for its remarkable supercapacitive performances. Electrochemical tests suggest that the NHPC-800 electrode offers the largest specific capacitance of 228 F g⁻¹, asplendid rate capability and stable electrochemical behaviors in a traditional three-electrode system. Additionally, asymmetric supercapacitor device is built based on this product as well. An individual as-assembled supercapacitor of NHPC-800//NHPC-800 delivers the maximum energy density of 4.3 Wh kg⁻¹; retains the majority of capacitanceat large current densities; and shows terrific cycling durability with negligible capacitance drop after long-term charge/discharge for beyond 10,000 cycles even at a high current density of 10 A g⁻¹. These excellent supercapacitive properties of NHPC-800 in both three- and two-electrode setups outperform those of lots of biomass-derived porous carbons and thus make it a perspective candidate for producing cost-effective and high-performance supercapacitors Full article

Pigments from wood-decay fungi (specifically spalting fungi) have a long history of use in wood art, and have become relevant in modern science due to their longevity and colorfastness. They are presently under investigation as colorants for wood, bamboo, oils, paints and textiles. Major hurdles to their commercialization have been color repeatability (in that the same strain of the same species of fungus may produce different colors over time), and the binding of the pigments to glass storage containers. This is persistent as they do not naturally exist in a loose form. Due to these issues, the ‘standard’ color for each was historically determined not by the amount of pigment, but by the color in a solution of dichloromethane (DCM), using the CIE L*a*b colorspace. This method of standardization severely limited the use of these pigments in industrial applications, as without a dry form, standard methodologies for repeatable color processing into other materials could not be easily implemented. Recent studies have developed a method to crystalize the red pigment from Scytalidium cuboideum (Sacc. & Ellis) Sigler & Kang, producing a highly pure (99%) solid crystal named ‘Dramada’. Herein a method is detailed to compare the molarity of this crystallized pigment to variations in the color, to determine a color saturation curve (by weight) for the pigment from S. cuboideum in DCM and acetone. The molarities for this experiment ranged from 0.024 mM to 19 mM. Each molarity was color read and assigned a CIEL*a*b* value. The results showed that there was a correlation between the molarity and color difference, with the maximum red color occurring between 0.73 mM and 7.3 mM in DCM and between 0.97 mM to 0.73 mM in acetone. Extremely low molarities of pigment produced strong coloration in the solvent, and changes in molarity significantly affected the color of the solution. Having a saturation and color curve for the crystal ‘Dramada’ from S. cuboideum will allow for the reliable production of distinct colors from a known quantity (by weight) of pigment, erasing the final hurdle towards commercial development of the crystallized pigment from S. cuboideum as an industrial dyestuff. Full article

In this study, the effects of bamboo leaf were examined on mycelial growth of Pyricularia grisea, a fungus of rice blast disease that causes a great loss in rice production. The hexane extract exhibited maximal reduction on growth of P. grisea (IC₅₀ = 0.62 mg/mL), followed by aqueous and ethyl acetate extracts, while the methanol extract was least effective (IC₅₀ = 9.71 mg/mL). At 0.5–1.0 mg/mL doses, all extracting solvents showed inhibition on the growth of P. grisea, but at a 0.1 mg/mL concentration, the antifungal activity was solely observed on hexane and ethyl acetate extracts. By GC-MS (gas chromatography-mass spectrometry), 25 constituents were identified, principally belonging to long-chain fatty acids, sterols, phenols, phenolic acids, volatile oils, and derivatives of terpenes. It was suggested that compounds originated from hexane and ethyl acetate extracts such as fatty acids, oils, and phenols, and their derivatives were responsible for the antifungal activity of bamboo leaf. Non-polar constituents were accountable for the antifungal activity, although water-soluble compounds may play a role. Bamboo leaf appears to be a potent natural source to manage the infestation of P. grisea in rice cultivation. Full article