Search Results (23)

Zwitterionic polymer hydrogels have great application prospects in wearable electronic devices due to their antifouling and excellent biocompatibility. However, its strong hydrophilicity often leads to easy swelling and poor mechanical properties. In this study, aramid nanofiber (ANF)-reinforced zwitterionic ion hydrogels were synthesized by the one-step free radical polymerization of N-acryloyl glycinamide (NAGA), N-[Tris (hydroxymethyl) methyl] acrylamide (THMA) and sulfobetaine methacrylate (SBMA) monomers in the presence of ANFs. A large number of hydrogen bonds were formed between the amide groups of the ANFs and the amide groups of the NAGA units/the hydroxyl groups of the THMA units/the sulfonic groups of the SBMA units, which improved the internal interface force of the hydrogel. The obtained ANF-reinforced hydrogel had an anti-swelling property, and its swelling ratio and tensile strength were 25% and 170% of those of the hydrogel without the addition of ANFs. By introducing lithium chloride as an electrolyte to improve its ion conductivity and subsequently assembling it into strain sensors, it exhibited a high sensitivity (GF = 1.12), short response and recovery times (100 ms and 150 ms), and excellent cycling stability. This work provides a feasible strategy for anti-swelling wearable strain sensors. Full article

Developing aramid fiber (AF) with electromagnetic interference (EMI) shielding properties is of significant importance for expanding their applications in the military, aerospace, and industrial sectors. Current research on the EMI shielding properties of AF often encounters challenges such as structural damage to the fibers and inadequate shielding performance. In this study, we used vacuum-assisted filtration technology to sequentially deposit aramid nanofiber (ANF) and MXene onto the surface of AF fabric, thus preparing ANF/MXene/AF composite fabric. MXene, with its large specific surface area and excellent electrical conductivity, was used in conjunction with ANF, which acts as an intermediate layer to effectively filter MXene and improve the interfacial adhesion between the MXene and AF. The results showed that, under the combined effects of reflection and absorption, the A20M40 sample achieved an average EMI SE of 78.1 dB in the X-band, meeting the EMI shielding requirements for both civilian and military applications. Additionally, the ANF/MXene/AF composite fabric exhibited excellent electrothermal conversion performance (surface temperature reached 120 °C within 32 s under 5 V) and photothermal performance (surface temperature reached 85 °C after 145 s of exposure to 1500 W/m² light intensity). Furthermore, the flame-retardant performance of the ANF/MXene/AF composite fabric was significantly enhanced compared to the pure AF fabric due to the physical barrier effect of MXene. Full article

Aramid nanofiber (ANF), a nanoscale building block with a prominently complex structure, can be prepared by splitting poly(p-phenylene terephthalamide) (PPTA) fibers into negatively charged ANFs in a deprotonating manner in a DMSO/KOH solvent system, followed by a subsequent re-protonation process using a proton-donor reagent. There are rare reports regarding the utilization of an aprotic donor reagent to convert deprotonated ANF dispersion into film or gel with a controllable structure and high mechanical properties. In this work, dichloromethane, as an anhydrous aprotic donor solvent, has been introduced into the deprotonated ANF dispersion to replace DMSO, containing PPTA molecules and hydroxyl ions, leading to the gelation of deprotonated ANF dispersions, forming a film (ANF_DCM) possessing a surprisingly highly entangled and oriented structure, as proven by SEM results. Due to the attenuation of electrostatic repulsion in the dispersion, partially deprotonated ANFs intertwined and cross-linked through π–π conjugation among a large number of benzene rings in PPTA molecules. After treating ANF_DCM with water for re-protonation, the as-prepared film (ANF_DCM-W) exhibited high tensile strength (307.7 MPa) and toughness (74.7 MJ m⁻³). Full article

Developing multifunctional flexible composites with high-performance electromagnetic interference (EMI) shielding, thermal management, and sensing capacity is urgently required but challenging for next-generation smart electronic devices. Herein, novel nacre-like aramid nanofibers (ANFs)-based composite films with an anisotropic layered microstructure were prepared via vacuum-assisted filtration and hot-pressing. The formed 3D conductive skeleton enabled fast electron and phonon transport pathways in the composite films. As a result, the composite films showed a high electrical conductivity of 71.53 S/cm and an outstanding thermal conductivity of 6.4 W/m·K when the mass ratio of ANFs to MXene/AgNWs was 10:8. The excellent electrical properties and multi-layered structure endowed the composite films with superior EMI shielding performance and remarkable Joule heating performance, with a surface temperature of 78.3 °C at a voltage of 2.5 V. Additionally, it was found that the composite films also exhibited excellent mechanical properties and outstanding flame resistance. Moreover, the composite films could be further designed as strain sensors, which show great promise in monitoring real-time signals for human motion. These satisfactory results may open up a new opportunity for EMI shielding, thermal management, and sensing applications in wearable electronic devices. Full article

The Applications of silica aerogel are limited due to its brittleness and low strength. As a result, it is essential to strengthen and toughen it. Organic nanofibers are one of the preferred reinforcement materials. In this work, we designed and fabricated flexible and compressible nanostructure-assembled aramid nanofiber/silica composites aerogel (ANF/SiO₂ aerogel) to improve the mechanical strength and flexibility of silica aerogel without compromising thermal insulation properties. The aramid nanofiber/silica composite aerogels were prepared by immersing the aramid nanofiber wet gel into the silica sol for a certain period of time followed by freeze drying without solvent replacement. The surface modifier 3-aminopropyltriethoxysilane (APTES) was used as a coupling agent to form chemical linkage between the ANF fiber and silica gel. It was observed that APTES can effectively drive the silica sol to infuse into ANF hydrogel, promoting the assembly of silica gel onto the fiber surface and a uniform distribution in the network of ANF. The compressive resilience, thermal stability, and thermal insulation properties of the composite aerogels were evaluated by inducing the silica aerogel into the ANF network to form a protective layer on the fiber and change the pore structure in the ANF network. Full article

The recent advancements in communication technology have facilitated the widespread deployment of electronic communication equipment globally, resulting in the pervasive presence of electromagnetic pollution. Consequently, there is an urgent necessity to develop a thin, lightweight, efficient, and durable electromagnetic interference (EMI) shielding material capable of withstanding severe environmental conditions. In this paper, we propose an innovative and scalable method for preparing EMI shielding films with a tunable sandwich structure. The film possesses a nylon mesh (NM) backbone, with AgNWs serving as the shielding coating and aramid nanofibers (ANFs) acting as the cladding layer. The prepared film was thin and flexible, with a thickness of only 0.13 mm. AgNWs can easily form a conductive network structure, and when the minimum addition amount was 0.2 mg/cm², the EMI SE value reached 28.7 dB, effectively shielding 99.884% of electromagnetic waves and thereby meeting the commercial shielding requirement of 20 dB. With an increase in dosage up to 1.0 mg/cm², the EMI SE value further improved to reach 50.6 dB. The NAAANF film demonstrated remarkable robustness in the face of complex usage environments as a result of the outstanding thermal, acid, and alkali resistance properties of aramid fibers. Such a thin, efficient, and environmentally resistant EMI shielding film provided new ideas for the broad EMI shielding market. Full article

In order to enhance the mechanical properties of UV-curable epoxy acrylate (EA)-based coatings, 3-(trimethoxysilyl)propyl methacrylate modified aramid nanofibers (T-ANFs) were synthesized and used as nanofillers to prepare EA/T-ANF nanocomposite films. The morphology of T-ANFs was characterized by transmission electron microscopy. The chemical structure of T-ANFs was analyzed via infrared spectroscopy, confirming successful grafting of methyl methacryloyloxy groups onto the surface of aramid nanofibers (ANFs). Real-time infrared spectroscopy was employed to investigate the influence of ANFs and T-ANFs on the photopolymerization kinetics of the EA film. The results revealed that the addition of ANFs and T-ANFs led to a decrease in the photopolymerization rate during the initial stage but had little impact on the final double bond conversion, with all samples exhibiting a conversion rate of over 83%. The incorporation of ANFs improved the tensile strength of the films while significantly reducing their Young’s modulus. In contrast, the addition of T-ANFs led to a substantial increase in both tensile stress and Young’s modulus of the films. For instance, the tensile strength and Young’s modulus of the 0.1 wt% of T-ANF film increased by 52.7% and 41.6%, respectively, compared to the pure EA film. To further study the dispersion morphology and reinforcement mechanism, the cross-sectional morphology of the films was characterized by scanning electron microscopy. Full article

Lightweight, flexible, and electrically conductive thin films with high electromagnetic interference (EMI) shielding effectiveness and excellent thermal management capability are ideal for portable and flexible electronic devices. Herein, the asymmetric and multilayered structure Ag-MXene/ANFs composite papers (AMAGM) were fabricated based on Ag-MXene hybrids and aramid nanofibers (ANFs) via a self-reduction and alternating vacuum-assisted filtration process. The resultant AMAGM composite papers exhibit high electrical conductivity of 248,120 S m⁻¹, excellent mechanical properties with tensile strength of 124.21 MPa and fracture strain of 4.98%, superior EMI shielding effectiveness (62 dB), ultra-high EMI SE/t (11,923 dB cm² g⁻¹) and outstanding EMI SE reliability as high as 96.1% even after 5000 cycles of bending deformation benefiting from the unique structure and the 3D network at a thickness of 34 μm. Asymmetric structures play an important role in regulating reflection and absorption of electromagnetic waves. In addition, the multifunctional nanocomposite papers reveal outstanding thermal management performances such as ultrafast thermal response, high heating temperatures at low operation voltage, and high heating stability. The results indicate that the AMAGM composite papers have excellent potential for high-integration electromagnetic shielding, wearable electronics, artificial intelligence, and high-performance heating devices. Full article

Aramid nanofibers (ANFs) were successfully produced by deprotonation of Kevlar fiber followed by grafting epichlorohydrin in dimethyl sulfoxide solution. The ANFs were then incorporated into carboxylated acrylonitrile butadiene rubber (XNBR) by means of latex blending, followed by vulcanization. The interaction between ANFs and XNBR, and the effects of ANFs on the mechanical strength, dielectric properties, and thermal stability of ANF/XNBR nanocomposites were investigated. The results revealed that hydrogen bonding and covalent bonding interactions existed between ANFs and the XNBR matrix and played a critical role in the reinforcement of ANFs to XNBR nanocomposites. After adding 5 phr (parts per hundred rubber) of ANFs, the XNBR nanocomposite exhibited a significant improvement in mechanical properties, namely a 182% increase in tensile strength and a 101% increase in tear strength. In addition, the dielectric constant and thermal properties of ANF/XNBR also increased dramatically. ANFs may thus make an ideal candidate for high-performance rubber materials. Full article

Porous composites have been widely used in the adsorption and catalysis field due to their special structure, abundant sites, and light weight. In this work, an environmentally friendly porous composite was successfully prepared via a facile freeze-drying method, in which cotton cellulose nanofiber (CCNF) was adopted as the main framework to construct the connected flue structure, and aramid nanofiber (ANF) was used as a reinforcer to enhance its thermal property. As-prepared porous materials retained a regulated inter-connected hole structure and controllable porosity after ice template evolution and possessed improved resistance to thermal collapse with the introduction of a small amount of aramid nanofiber, as evaluated and verified by FTIR, SEM, and TGA measurements. With the increased addition of cotton cellulose nanofiber and aramid nanofiber, the porous composites exhibited decreased porosity and increased pressure drop performance. For the CCNF/ANF-5 sample, the pressure drop was 1867 Pa with a porosity of 7.46 cm³/g, which best met the required pressure drop value of 1870 Pa. As-prepared porous composite with adjustable interior structure and enhanced thermal property could be a promising candidate in the tobacco field. Full article

In this work, aramid nanofibers (ANFs)/reduced graphene oxide (ANFs/RGO) film electrodes were prepared by vacuum-assisted filtration, followed by hydroiodic acid reduction. Compared with thermal reduced ANFs/RGO, these as-prepared film electrodes exhibit a combination of mechanical and electrochemical properties with a tensile strength of 184.5 MPa and a volumetric specific capacitance of 134.4 F/cm³ at a current density of 0.125 mA/cm², respectively. In addition, the film electrodes also show a superior cycle life with 94.6% capacitance retention after 5000 cycles. This kind of free-standing film electrode may have huge potential for flexible energy-storage devices. Full article

The mechanical performance is critical for hydrogels that are used as strain sensors. p-Aramid nanofiber (ANF) is preferable as an additive to the reinforce the mechanical performance of a poly(vinyl alcohol) (PVA). However, due to the limited hydrogen bond sites, the preparation of ultra-stretchable, ANF-based hydrogel strain sensor is still a challenge. Herein, we reported an ultra-stretchable PVA hydrogel sensor based on tea stain-inspired ANFs. Due to the presence of numerous phenol groups in the tannic acid (TA) layer, the interaction between PVA and the ANFs was significantly enhanced even though the mass ratio of TA@ANF in the hydrogel was 2.8 wt‰. The tensile breaking modulus of the PVA/TA@ANF/Ag hydrogel sensor was increased from 86 kPa to 326 kPa, and the tensile breaking elongation was increased from 356% to 602%. Meanwhile, the hydrogel became much softer, and no obvious deterioration of the flexibility was observed after repeated use. Moreover, Ag NPs were formed in situ on the surfaces of the ANFs, which imparted the sensor with electrical conductivity. The hydrogel-based strain sensor could be used to detect the joint movements of a finger, an elbow, a wrist, and a knee, respectively. This ultra-stretchable hydrogel described herein was a promising candidate for detecting large-scale motions. Full article

The heterogeneous Fenton system has drawn great attention in recent years due to its effective degradation of polluted water capability without limitation of the pH range and avoiding excess ferric hydroxide sludge. Therefore, simple chemical precipitation and vacuum filtration method for manufacturing the heterogeneous Fenton aramid nanofibers (ANFs)/ferrous oxalate (FeC₂O₄) composite membrane catalysts with excellent degradation of methylene blue (MB) is reported in the study. The morphology and structure of materials synthesized were characterized by scanning electron microscope (SEM), X-ray energy spectrum analysis (EDS), infrared spectrometer (FTIR), and X-ray diffraction (XRD) equipment. The 10 ppm MB degradation efficiency of composite catalyst and ferrous oxalate (FeC₂O₄) within 15 min were 94.5% and 91.6%, respectively. The content of methylene blue was measured by a UV-Vis spectrophotometer. Moreover, the dye degradation efficiency still could achieve 92% after five cycles, indicating the composite catalyst with excellent chemical stability and reusability. Simultaneously, the composite catalyst membrane can degrade not only MB but also rhodamine B (RB), orange II (O II), and methyl orange (MO). This study represents a new avenue for the fabrication of heterogeneous Fenton catalysts and will contribute to dye wastewater purification, especially in the degradation of methylene blue. Full article

A foldable and cuttable sheet heater was fabricated using single-walled carbon nanotubes (SWCNTs) and aramid nanofibers (ANFs). SWCNTs are particularly well suited for Joule heating based on their high thermal stability, electrical properties, high current density, and aspect ratio. When the SWCNT/ANF composite reaches a high temperature during Joule heating, ANFs will endure this temperature due to their impressive thermal stability, derived from aramid fibers. With the aim of achieving a synergistic effect between the SWCNTs and ANFs, 0–100 wt% SWCNT/ANF composite sheets were fabricated by tip-type sonication and vacuum filtration. After assessing the thermal stability and electrical properties of the composite sheets, the Joule heating effect was analyzed. TGA showed that our sheet had high thermal stability in an air condition up to around 500 °C. The electrical conductivity of the composite sheet was improved as the amount of SWCNT added rose to 790.0 and 747.5 S/cm in the 75 and 100_SWCNTs/ANF, respectively. The maximum heating temperature, up to 280 °C, reached by Joule heating was measured as a function of SWCNT content and input voltage, and the relationship among SWCNT content, input voltage, heating temperature, and electric power was described. Mechanical properties were also measured in a temperature range similar to the heating temperature of 300 °C reached by Joule heating. Ultimately, we obtained a foldable and cuttable composite sheet with a stretchable structure, capable of being molded into a variety of shapes. This energy-efficient material can potentially be employed in any device in which a heater is required to deliver high temperatures. Full article

To expand the application range of flexible pressure sensors, endowing them with multifunction capabilities becomes extremely important. Herein, a flexible, strong and multifunctional nanocomposite film was prepared by introducing silver nanoparticles (Ag NPs) into aramid nanofiber (ANF) film using a simple two-step vacuum filtration method. When the Ag content was 27.6 vol%, the electrical resistance of the resulting ANF@Ag nanocomposite film was as low as 1.63 Ω/cm², and the water contact angle of the nanocomposite film reached 153.9 ± 1°. Compared to the ANF film, the tensile strength of the nanocomposite film increased from 55 MPa to 66.3 MPa with an increase of 20.5%. After being applied to the human body, the nanocomposite film served as a pressure sensor that was able to recognize different stimuli for healthcare monitoring. Based on the advantages, it may become a potential candidate for electronic skin, intelligent wearable devices and medical detection equipment. Full article