Search Results (1,266)

Pseudomonas plecoglossicida causes bacterial hemorrhagic ascites in ayu (Plecoglossus altivelis), a lethal disease characterized by abdominal distension with hemorrhagic ascites, multifocal organ hemorrhages, and histopathologically evident hepatocellular necrosis and inflammatory infiltration. The lack of effective treatments exacerbates mass mortalities, posing a significant threat to aquaculture. Given the severe pathogenesis of P. plecoglossicida infection—which involves bacterial colonization, tissue necrosis, and host immune dysregulation—effective therapeutic strategies are urgently needed. Through a screen of traditional Chinese medicine monomers, we identified harmine, an indole alkaloid derived from Peganum harmala seeds, as a potent agent against this pathogen. In vivo, harmine exhibited direct bactericidal activity by disrupting membrane integrity, as evidenced by increasing membrane permeability, and inhibiting biofilm formation. In an ayu infection model, harmine significantly increased host survival, reduced tissue bacterial load, and enhanced innate immunity by augmenting monocyte/macrophage phagocytosis and bactericidal capacity while suppressing pro-inflammatory cytokine release and apoptosis. Mechanistically, the Drug Affinity Responsive Target Stability assay was used to identify the molecular target of harmine, followed by functional validation through PRDX6−knockdown experiments. Harmine exhibited direct bactericidal activity by disrupting membrane integrity and inhibiting biofilm formation. In the ayu infection model, harmine significantly increased host survival, reduced tissue bacteria1 load, and enhanced innate immunity by augmenting monocyte/macrophage system and bactericidal capacity while suppressing pro-inflammatory cytokine release and apoptosis, the latter likely through modulation of PRDX6−mediated oxidative stress and downstream caspase signaling. Mechanistically, DARTS revealed that harmine binds to peroxiredoxin 6 (PRDX6), a multifunctional enzyme possessing peroxidase, phospholipase A₂, and lysophosphatidylcholine acyltransferase activities. This binding liberates TNF receptor-associated factor 6 (TRAF6), facilitating its mitochondrial translocation and association with the ECSIT signaling integrator complex, thereby amplifying mitochondrial reactive oxygen species (mROS) production and potentiating macrophage-mediated bacterial killing. These findings establish harmine as a promising therapeutic candidate for controlling P. plecoglossicida infections and underscore the value of host-directed immunomodulation derived from natural products in aquaculture medicine. Full article

Industrial emissions of large amounts of CO₂ have seriously affected human health, making it imperative to reduce atmospheric CO₂ concentrations. However, carbon capture technologies such as chemical absorption and membrane separation are still limited by high regenerative energy costs, corrosion, and low efficiency in diluting flue gas. Within this technological landscape, physical adsorption separation technology, due to its advantages such as a wide operating temperature range, low equipment corrosivity, and low regeneration energy consumption, has gradually become a research hotspot in carbon capture technology. The core of physical adsorption lies in finding high-quality adsorbents. Metal–organic frameworks (MOFs), with their ultra-high specific surface area, tunable pore structure, and abundant functionalization sites, are considered highly promising next-generation CO₂ adsorbent materials. This review summarizes strategies for modifying MOFs to improve CO₂ adsorption performance, focusing on aperture adjustment, doped metal ions, functional group doping, and computational screening. Performance enhancements are mechanism-dependent rather than simply additive. Moderate aperture adjustment and defect engineering can improve gas selectivity and CO₂ capture capacity, while excessively narrow pores sacrifice available pore volume and gas diffusion. Doped metal ions, particularly in MOF-74 and related materials, can enhance CO₂ capture capacity while controlling framework integrity and dopant composition. Functional group Doping remains an effective method for capturing low-partial-pressure CO₂. Computational screening is shifting from ranking based on single adsorption capacity to a comprehensive consideration that includes humidity tolerance, stability, and regenerability. Overall, under industrial conditions, modified MOFs should be evaluated by balancing affinity, selectivity, capacity, stability, and energy efficiency. This review provides guidance for the rational design of MOF-based carbon capture adsorbents. Full article

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) enters host cells when the spike receptor-binding domain (RBD) engages angiotensin-converting enzyme 2 (ACE2). Cannabinoid scaffolds have recently been reported to bind S1/RBD, block spike-mediated membrane fusion, and modulate host inflammatory pathways, making them attractive candidates for entry inhibition. Here, we applied an integrated computational pipeline to prioritize cannabis-derived compounds as interfacial blockers of the RBD–ACE2 complex across variants. Eleven phytocannabinoids were docked into the wild-type (WT) RBD–ACE2 interface, identifying three cavities, with ligands preferentially occupying pocket 1. Complexes were subjected to triplicate 200 ns all-atom molecular dynamics (MD) simulations for WT, Delta, and Omicron BA.1 RBD–ACE2. Binding energetics were quantified using molecular mechanics/generalized Born surface area (MM/GBSA) and solvated interaction energy (SIE), and per-residue contributions were analyzed together with solvent-accessible surface area (SASA) and residue interaction networks. Among all compounds, cannabidiol (CBD) and cannabinol (CBN) were the only ligands that remained stably bound in pocket 1 for all variants. CBN showed the most favorable ligand–complex binding in WT, whereas CBD preserved favorable binding in Omicron BA.1 despite reduced interface burial, indicating that van der Waals/electrostatic complementarity and solvation, rather than surface coverage alone, govern affinity. Both ligands weakened modeled RBD–ACE2 binding by perturbing hot-spot residues centered on Y505 or N501Y in RBD and E37, A387, and R393 in ACE2. Overall, our results highlight CBD and CBN as tractable, variant-spanning interface disruptors and illustrate how MD-based free-energy calculations can support computational drug discovery against evolving viral protein–protein interfaces. Full article

Background: Rabies is a highly fatal zoonotic disease that causes approximately 59,000 human deaths worldwide each year. Current inactivated rabies vaccines require multiple doses and are associated with high costs. The full-length rabies virus glycoprotein (RVG), a membrane protein, exhibits substantial instability in its trimeric structure during recombinant expression. This instability makes it difficult to obtain high-purity, correctly folded antigens. Objectives: This study focuses on the preparation of a full-length recombinant RVG subunit vaccine candidate expressed in a glycoengineered Pichia pastoris system with mammalian-like glycosylation. Methods: The full-length RVG gene (including the transmembrane domain and cytoplasmic tail) from the Challenge Virus Standard-11 (CVS-11) strain was codon-optimized and inserted into the pPICZαA vector to construct the recombinant expression plasmid pPICZαA-RVG. The plasmid was transformed into glycoengineered Pichia pastoris X33-7 (low-mannose type) by electroporation for inducible expression. The target protein was purified by nickel affinity chromatography, anion-exchange chromatography, and Superdex-200 size-exclusion chromatography. The structural characteristics of the purified protein were analyzed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The purified antigen was formulated with the adjuvants AS03 or MF59. BALB/c mice (n = 5 per group) were immunized intramuscularly following a four-dose schedule (days 0, 7, 14, and 28). Antigen-specific IgG antibody titers were measured by ELISA, and neutralizing antibody titers were determined using the rapid fluorescent focus inhibition test (RFFIT). Results: Glycoengineered Pichia pastoris yeast strains expressing wild-type RVG (RVG-WT) or a mutant variant (RVG-M6: R84S, R199S, H270P, R279S, K300S, and R463S) were successfully constructed. The purified RVG antigen formed nanoparticles with an average particle size of approximately 75 nm. Immunized mice generated robust RVG-specific IgG responses, with titers reaching approximately 6.31 × 10⁵ for RVG-WT after the fourth immunization, compared to 3.16 × 10³ for RVG-M6 and 5.62 × 10³ for the RVG-WT-PEG control. Two weeks after the fourth immunization, RVG-WT formulated with AS03 or MF59 induced significant neutralizing antibody responses compared with the control group (p < 0.0001 and p < 0.01, respectively). The neutralizing antibody titers reached 1:79.43 in the AS03 group and 1:33.11 in the MF59 group, whereas the WT-PEG + AS03 control group showed a low titer of 1:3.72. In contrast, RVG-M6 formulated with MF59 failed to induce detectable neutralizing antibodies (1:3.02). Furthermore, RVG-WT + AS03 induced significantly higher neutralizing antibody responses than the WT-PEG + AS03 control group (p < 0.0001), and a significant difference was also observed between the RVG-WT + MF59 and RVG-M6 + MF59 groups (p < 0.01). Conclusions: The glycoengineered Pichia pastoris expression system successfully produced uniform full-length rabies virus glycoprotein nanoparticles with high purity. When formulated with the AS03 adjuvant, RVG-WT induced high-titer neutralizing antibodies in mice, suggesting a promising strategy for the development of recombinant subunit vaccines against rabies. However, this study is limited by the absence of challenge studies and validation in target animal species, which will be further investigated in future work. Full article

Phytate (myo-inositol hexakisphosphate) is a polyphosphate found in plant-based foods whose intestinal absorption mechanisms are insufficiently understood. Due to its high affinity for calcium, phytate can deplete extracellular calcium and potentially affect tight junction integrity, which could increase paracellular permeability. This study investigated the permeation of phytate across Caco-2 cell monolayers depending on calcium concentration. Differentiated Caco-2 cells were cultured on semi-permeable membranes and incubated with various phytate concentrations (0.17–1.66 mM) in media with low (2.1 µM) or normal (1.8 mM) calcium concentration. Phytate permeability and tight junction integrity were analyzed using HPLC and Lucifer yellow as a paracellular marker. At low calcium concentration, significant permeability was observed starting from 0.55 mM phytate (~60% at 1.66 mM), while at normal calcium concentration, significant permeability was only detectable at 1.66 mM. The increased Lucifer yellow permeation correlated with phytate permeation and confirmed tight junction disruption. Phytate that reached the basolateral side at physiological calcium concentration precipitated completely as insoluble calcium–phytate complex. These results demonstrate that phytate can pass intestinal epithelium via the paracellular pathway and increase the paracellular permeability, especially at low apical concentrations of calcium. Full article

Purpose: Prostate-specific membrane antigen (PSMA) is a well-established molecular target in prostate cancer (PCa). Both radionuclide imaging and near-infrared fluorescence (NIRF) imaging offer high sensitivity for in vivo tumor detection. PSMA-targeted dual-modality probes integrating these two imaging techniques provide complementary preoperative and intraoperative tumor visualization, thereby improving surgical guidance in PCa. In this study, we aimed to develop a novel dual-labeled PSMA probe combining radioactive and fluorescent properties to achieve precise tumor delineation during radical prostatectomy (RP). Methods: A high-affinity PSMA-targeted fluorescent probe (PSMA-DF) was synthesized using solid-phase synthesis. Subsequent radiolabeling with the radionuclide [⁶⁸Ga]Ga yielded the successful generation of a dual-modal PSMA-targeted molecular probe, namely [⁶⁸Ga]Ga-PSMA-DF. The probe was systematically evaluated both in vitro and in vivo, and its safety profile was assessed through acute toxicity testing. Tumor-bearing nude mouse models were established using PSMA-positive 22Rv1 and PSMA-negative PC-3 PCa cell lines. Imaging performance, tumor-targeting specificity, and biodistribution of the probe were comprehensively evaluated using micro-PET imaging, in vivo fluorescence imaging, and biodistribution studies. Results: High-quality and high-purity PSMA-DF was successfully prepared, which exhibited excellent optical properties. Following radiolabeling with [⁶⁸Ga]Ga, a dual-modality radionuclide-fluorescence probe ([⁶⁸Ga]Ga-PSMA-DF) was successfully constructed. In vitro cellular uptake studies demonstrated that 22Rv1 cells had relatively high uptake of the probe, reaching 7.34 ± 0.55 IA%/10⁶ cells at 120 min. In contrast, PC-3 cells and blocked 22Rv1 cells displayed minimal uptake, confirming the specific targeting ability of the probe. In vivo evaluations were conducted on tumor-bearing mice using micro-PET/CT and NIRF imaging. The results revealed that [⁶⁸Ga]Ga-PSMA-DF achieved high specific tumor accumulation in 22Rv1 xenografts, with the peak tumor uptake (SUVmax = 1.748 ± 0.132) and tumor-to-muscle ratio (11.542 ± 1.511) observed at 120 min. Notably, high-contrast fluorescence imaging was also achieved at later time points, yielding a tumor-to-background ratio (TBR) of 6.559 ± 1.415 at 48 h. Notably, ex vivo biodistribution data were consistent with in vivo imaging findings. Conclusions: This preclinical study demonstrates that [⁶⁸Ga]Ga-PSMA-DF exhibits high and specific uptake in PCa models, supporting its potential as a dual-modality tracer for both PET/CT imaging and real-time intraoperative fluorescence guidance during PCa surgery. Full article

Pseudomonas aeruginosa causes severe healthcare-associated infections, yet no vaccine has been licenced. To circumvent the antigenic variability of classical surface antigens, we evaluated LolB—an essential outer-membrane lipoprotein whose periplasmic orientation favours T-cell-dominant mechanisms with potential antibody access via outer-membrane vesicles (OMVs) or bacteriolysis. An integrative in silico pipeline combined multi-strain conservation (20 isolates), epitope discovery (B- and T-cell), safety filters, physicochemical profiling, de novo/refined 3D modelling, molecular dynamics (MD), and docking to TLR4/MD-2. LolB was highly conserved (95–100% identity) under strong purifying selection (dN/dS = 0.15). A conformational B-cell hotspot centred on Q72 mapped to a solvent-accessible flexible loop. Two class II epitopes—LAAQNSPLT and FLGSAAAVS—showed predicted high affinity (IC₅₀ < 10 nM), non-toxicity, and broad coverage, with the pooled set achieving 98.6% global HLA coverage in silico. The final 119-aa construct (N-terminal hBD-3 adjuvant; GPGPG linkers) was compact and tractable (MW = 12.7 kDa; instability index < 40; near-neutral GRAVY) and scored higher for antigenicity than native LolB (VaxiJen 0.82 vs. 0.41). MD supported thermal stability up to 350 K, linker RMSF < 1.5 Å, and a stable 18.2 ± 2.8 Å interdomain spacing. Docking predicted a 1420 Ų interface and ΔG = −10.2 kcal·mol⁻¹ (Kd = 28 nM) with reproducible polar contacts, suggesting productive TLR4/MD-2 engagement. A conservative R42A/K variant is proposed to temper IFN-γ bias. This work therefore suggests an essentiality-anchored LolB-derived multi-epitope construct as a computational vaccine candidate against multidrug-resistant P. aaeruginosa and defines specific experimentally testable hypotheses for future in vitro/in vivo assessment. Essentiality-anchored epitope selection plus adjuvant-surface engineering yielded a structurally coherent, immunologically rational LolB-derived multi-epitope vaccine warranting experimental validation. Full article

Curcumin, a natural polyphenol derived from Curcuma longa, is widely recognized for its therapeutic properties. However, its clinical utility is limited because of poor solubility, rapid degradation and hence low bioavailability. To overcome these issues, nanoformulation approaches, especially PEGylated liposomes, have been explored as advanced delivery systems. PEGylation, which involves attaching polyethylene glycol (PEG) to the liposomal surface, enhances circulation time by creating a steric shield that reduces protein interactions and clearance by the mononuclear phagocyte system (MPS). However, PEG can alter lipid membrane properties, which may in turn affect curcumin’s solubility and distribution within the liposomal bilayer, ultimately reducing its loading efficiency. To ensure that PEG-modified liposomes can be effectively loaded with curcumin, we investigated curcumin–membrane interactions in saturated (DMPC) and unsaturated (POPC) liposomes, both in the presence and absence of PEG. Based on dissociation constants (K_d) obtained from fluorescence spectroscopy measurements, we found that PEGylated DMPC liposomes exhibit the strongest binding affinity for curcumin. Fluorescence quenching experiments showed that curcumin adopts a transbilayer orientation in all membranes examined. Curcumin’s location within PEGylated and non-PEGylated liposomal membranes was further confirmed by examining its effects on membrane properties, including fluidity, polarity, and oxygen transport. These effects were investigated using electron paramagnetic resonance (EPR) spectroscopy with spin labels. The results indicate that PEG does not impose major changes on membrane properties. Curcumin, however, was found to reinforce the liposomal membranes, increase their polarity, and reduce oxygen availability. Overall, the findings suggest that liposomes, particularly those composed of PEGylated DMPC, are effective vehicles for curcumin delivery. Full article

HIV latency, driven by a complex interplay of host factors, remains a key barrier to viral clearance. Current latency-reversing agents (LRAs) demonstrate limited efficacy and specificity, and none have been approved for clinical use. Although natural products have shown promise as LRAs, the therapeutic potential of fungal metabolites remains underexplored. Candida albicans, a prevalent human commensal and opportunistic pathogen, produces diverse secondary metabolites that can influence host pathways, affecting latency dynamics. This study aimed to investigate the latency-modulating potential of secondary metabolites of C. albicans using an integrative network pharmacology and computational pipeline. C. albicans secondary metabolites were retrieved from the literature, screened for drug-likeness, and mapped to human targets and biological pathways annotated in HIV latency. Key metabolites, hub genes, and pathways were systematically characterized through network and computational analyses. Six drug-like candidates, identified from 185 absorption, distribution, metabolism, excretion, and toxicity (ADMET)-screened metabolites, collectively mapped to 369 human genes with a 6.5% overlap in HIV latency (176 shared and 20 hub genes). These overlapping genes were significantly enriched for signal transduction, membrane localization, and adaptive responses to chemical stimuli. Kyoto encyclopedia of genes and genomes (KEGG) enrichment revealed oncogenic diseases (non-small cell lung, pancreatic, and prostate cancers) and latency-associated cascades, including PD-L1/PD-1, HIF-1, Ras, PI3K-Akt, calcium, and cAMP signaling. Six hub targets (MAPK1, PIK3CA, MAPK3, EGFR, MTOR, and AKT1) were consistently annotated within the top 30 KEGG pathways and displayed strong binding affinities for MET 15 and MET 119. Molecular dynamics (MD) simulations confirmed favorable binding free energies (BFEs) and stable conformational dynamics for the top-ranked metabolite MET 15. C. albicans secondary metabolites preferentially target oncogenic signaling networks central to HIV latency maintenance, notably PI3K/AKT/MTOR and MAPK/ERK, which regulate cell survival, metabolic homeostasis, and viral transcriptional repression. MET 15 is a top-ranked candidate metabolite for HIV latency-reversing therapeutics and warrants experimental validation in established latency models. Full article

Purpose: The objective of this study was to engineer and optimize a mucoadhesive, positively charged stearylamine-enriched liposomal platform, termed Aminosomes, to circumvent the biophysical barriers limiting the ocular bioavailability of Brimonidine Tartrate (BT), an alpha-2 adrenergic receptor agonist for glaucoma management. Methods: Aminosomes were synthesized using a tailored ethanol injection technique and optimized via a 3² × 2¹ full factorial design. Molecular integrity and crystallinity were assessed using Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The mucoadhesive potential was validated through a mucin interaction assay based on zeta potential shifts. In vitro release kinetics were evaluated using the dialysis membrane diffusion technique, while the therapeutic potential and ocular safety were validated through in vivo pharmacodynamic profiling of intraocular pressure (IOP) reduction, alongside comprehensive biocompatibility assessments via Draize irritancy protocol and histopathological examination. Results: The optimized Aminosomes exhibited nanometric dimensions, monodisperse size distribution, robust positive surface charge, and superior drug loading. FTIR and XRD analyses confirmed the chemical compatibility of the formulation components, as well as the successful encapsulation of BT and its transition to an amorphous state within the lipidic matrix. The mucoadhesion test demonstrated a high binding affinity for mucin. The in vitro release profile demonstrated a sustained-release pattern (78.8% over 12 h). Non-compartmental pharmacodynamic analysis of IOP-reduction data revealed a 2.8-fold increase in AUC_0–24h, 3.5-fold extension in t_1/2, and 5.2-fold prolongation in mean residence time (MRT) relative to the standard solution. Conclusions: The optimized Aminosomes demonstrated superior mucoadhesive anchoring, enhanced and sustained therapeutic flux without inducing ocular toxicity, offering a robust strategy for enhancing the pharmacodynamics of BT. Full article

Fungal contamination during postharvest storage causes significant food losses, particularly due to Penicillium expansum and Penicillium brevicompactum, highlighting the need for sustainable antifungal alternatives. This study evaluated the antifungal potential of clove essential oil (Syzygium aromaticum) against P. expansum and P. brevicompactum by integrating in vitro assays with in silico analyses. Minimum inhibitory concentrations (MICs) were determined, and effects on fungal growth, membrane integrity, and spore germination were assessed. Molecular docking and molecular dynamics simulations were performed to evaluate the affinity and stability of the five most abundant GC–MS compounds that met predefined ProTox-II toxicity criteria (categories 5–6; LD₅₀ ≥ 2000 mg/kg) toward chitin synthase I (CHS I), a key enzyme in chitin biosynthesis. The oil exhibited strong inhibitory activity, with MIC values of 0.156 µL/mL against P. expansum and 0.312 µL/mL against P. brevicompactum, along with significant morphological and physiological alterations. Computational analyses indicated that trans-β-caryophyllene oxide and α-humulene form stable interactions at both the active and an allosteric site of CHS I, supporting a putative dual inhibitory mechanism. These findings highlight clove essential oil as a promising ecological alternative to synthetic fungicides and underscore the value of computational approaches for elucidating antifungal mechanisms in understudied species. Full article

To address the limited selectivity of conventional membrane materials toward sulfonamide antibiotics, this study employed a DFT calculation approach to optimize the design of a molecularly imprinted system for sulfadiazine (SDZ). A hierarchical set of template molecules—aniline (ANL), sulfanilamide (SNM), and SDZ—was introduced to systematically elucidate structure-dependent template–monomer matching mechanisms in sulfonamide imprinting systems. Through rational screening, trifluoroethyl methacrylate (TFEMAA) was identified as the optimal functional monomer, with an optimal imprinting molar ratio of 1:4 (SDZ to TFEMAA). Guided by the simulation results, SDZ molecularly imprinted polymers (MIPs) were synthesized via precipitation polymerization and systematically characterized for their morphology and recognition properties. The MIPs exhibited a well-defined spherical morphology with abundant imprinted cavities, achieving adsorption equilibrium within 1.5 h. The adsorption kinetics followed a pseudo-second-order model, indicating a chemisorption-dominated process. Scatchard analysis revealed the presence of both high- and low-affinity binding sites in the MIPs. Selectivity experiments, quantified by distribution coefficients (K_d) and selectivity coefficients (k), demonstrated a significantly higher adsorption capacity for SDZ than for structural analogs and non-analogs. In real water samples, the MIPs outperformed conventional HLB sorbents and showed strong anti-interference capability (RSD < 3%). This work provides a material foundation for developing highly selective SDZ-imprinted membranes and advances the application of molecular imprinting technology in membrane separation systems. Full article

Soil salinization has become a major global constraint threatening ecosystem stability and agricultural production. As a prominent salt-tolerant turfgrass, Paspalum vaginatum (seashore paspalum) serves as an excellent material for exploring salt tolerance mechanisms. In this study, PvHAK12, a high-affinity K⁺ transporter (HAK) family gene isolated from seashore paspalum, was functionally characterized. PvHAK12 encodes a 788 amino acid protein with 13 transmembrane domains, belonging to the plasma membrane-localized ion transporters. It exhibits high sequence conservation with other HAK transporters and is predominantly expressed in roots and stems, with distinct tissue- and time-specific induction under salt stress. Yeast complementation assays revealed that PvHAK12 has no obvious K⁺ transport capacity but may mediate Na⁺ transport. Overexpression of PvHAK12 in Arabidopsis thaliana significantly reduced salt tolerance at germination, seedling and rosette stages, as reflected by lower germination rate, fresh weight, survival rate, the maximum quantum yield of photosystem II (Fv/Fm) value and chlorophyll content, accompanied by higher ion leakage. Under salt stress, transgenic plants accumulated more Na⁺ and less K⁺, leading to an elevated Na⁺/K⁺ ratio. Moreover, transgenic lines displayed weaker antioxidant enzyme activities and higher reactive oxygen species (ROS) accumulation. Transcript analysis further demonstrated that PvHAK12 overexpression suppressed the induction of multiple ion-transport and stress-responsive genes under salt conditions. These results indicate that PvHAK12 negatively regulates plant salt tolerance by disrupting ion homeostasis, antioxidant capacity and stress-related gene expression. Full article

This study developed an active packaging material by incorporating tea tree oil (TTO)-loaded lotus stalk biochar (BC@TTO) into a chitosan (CS) matrix. Biochar was prepared from lotus stalks via pyrolysis at 600 °C and characterized, revealing a mesoporous structure with a specific surface area of 35.9 m²/g. Adsorption studies demonstrated that BC exhibited high affinity for TTO, following pseudo-first-order kinetics and the Langmuir isotherm model, with a maximum adsorption capacity of 295.6 mg/g. Chitosan-based composite membranes with varying BC@TTO contents (1–7 wt%) were fabricated by solution casting. The incorporation of BC@TTO significantly enhanced the tensile strength, elongation at break, barrier properties (water vapor and oxygen), and antioxidant/antibacterial activities of the membranes, with optimal performance observed at 3 wt% loading. However, higher loadings led to filler aggregation, reduced transparency, and compromised mechanical properties. In vitro release studies indicated that TTO release followed the Avrami model, suggesting a diffusion-controlled mechanism. Preservation tests on blueberries showed that the CS-3BC@TTO membrane effectively reduced weight loss and maintained fruit quality during storage. This work presents a promising strategy for designing bioactive packaging materials with sustained release functionality for food preservation applications. Full article

Monkeypox virus, a zoonotic DNA virus belonging to the Orthopoxvirus genus, has emerged as a global health issue because of its fast spread to 104 nations over six continents. In the current study, an immunoinformatics pipeline was used to design a multiepitope-based prophylactic vaccine targeting the A35R glycoprotein and E8L membrane proteins of the monkeypox virus. Selected target proteins were surface-exposed, non-homologous to the human proteome, and essential for viral pathogenesis. B-cell and T-cell (MHC-I and MHC-II) epitopes with high antigenicity (>0.5), non-allergenicity, non-toxicity, and highly soluble in water with strong affinity towards innate and adaptive receptors, were prioritized. Shortlisted epitopes were combined to design the final vaccine utilizing an adjuvant (50S ribosomal L7/L12) and appropriate linkers for improved immunogenicity. Population coverage analysis showed wide HLA representation with 83.57% (MHC-I) and 88.8% (MHC-II) global coverage, including 89.6% for West Africa and 87.3% for Central Africa. Docking analysis of the vaccine construct with the TLR-4 receptor revealed stable interactions (−695.6 kcal/mol). Molecular dynamics simulations and binding free energies further confirmed structural stability. Immune simulations predicted strong activation of both humoral and cellular immune responses. These results indicate that the designed multiepitope vaccine construct is a viable option for additional experimental validation against the monkeypox virus. Full article