Search Results (106)

Gaofen-1/Gaofen-6 (GF1/GF6) wide-field-view (WFV) imagery provides repeated wide-area observations for regional surface-water monitoring, but its use is complicated by fragmented water patterns, vegetation–water mixtures, terrain and cloud shadows, and cross-scene radiometric variability. This study presents a seven-channel nested U-Net (UNet++) framework with a residual logit refinement branch (RLRB) for binary surface-water extraction. The input combines Blue, Green, Red, near-infrared, normalized difference water index, normalized difference vegetation index, and digital-elevation-model-derived slope channels. Five complete GF1/GF6 scenes were locked before dataset partitioning, and an 8192 m exclusion buffer was used to exclude spatially overlapping or adjacent non-test tiles from model development, thereby reducing the risk of spatial leakage. The resulting quantitative test set contained 2783 valid 512 by 512 pixel tiles derived from the five scenes withheld at scene level. The UNet++ model with RLRB and edge-consistency supervision achieved an mIoU of 0.941, Water IoU of 0.889, and Water F1 of 0.941. A controlled $2\times 2$ experiment separated the effects of residual refinement and edge-consistency supervision, while feature, loss-component, random-seed, rule-based-baseline, and complete-scene analyses further characterized the framework. Complete-scene sliding-window inference required approximately 3.7 min per scene on a single NVIDIA GeForce RTX 5060 Laptop GPU, demonstrating the feasibility of georeferenced water-mask generation under the specified computational setting. Full article

Optical remote sensing images acquired in rugged mountains are affected by reflectance distortion caused by both topography and shadows. Most topographic correction (TC) methods normalize sunlit slopes but can become unstable in self shadow and cast shadow, where little or no direct solar radiation reaches the surface. This study builds on the topographic shadow effect correction (TSEC) model and develops TSEC+TC, a partitioned framework for horizontal equivalent normalization. Using a shadow mask extended to penumbra, the framework integrates TSEC for shadowed pixels with conventional TC for sunlit pixels. Both branches target horizontal equivalent reflectance, enabling simultaneous correction of topographic and shadow effects across the scene. We implemented TSEC+TC with path length correction (PLC) and SCS with C (SCSC) models and evaluated it using ten multi-temporal Landsat 8 OLI scenes under different illumination conditions. The results showed that TSEC+TC reduced terrain-related brightness variation and improved land cover classification in the auxiliary comparison relative to uncorrected and TC-only results. For TSEC+SCSC, the R² values between corrected reflectance and cosi were below 0.025 for both Red and SWIR1 bands, and the coefficient of variation of reflectance across aspects was consistently lower than the corresponding values for SE and SCSC, with a maximum of 36.00%. Shadow area analyses indicated that TSEC+TC compensated reflectance distortion in self shadow and cast shadow areas, reduced TC-induced outliers, and better preserved spectral patterns than TC-only correction. Tests using Sentinel-2 MSI and GF-1 WFV imagery provided preliminary evidence of applicability to other sensors. Accounting for the topographic shadow effect improved TC performance in complex mountainous areas. Full article

This study proposes an integrated pixel-level reflectance adjustment (IPRA) method using Sentinel-2 MSI as the reference to address radiometric discrepancies in GF-1/6 WFV imagery, particularly caused by sensor decay and geometric distortions. The proposed IPRA method leverages time-series data and a spatial heterogeneity detection mechanism to effectively mitigate geometric distortions. Furthermore, it incorporates a weighted linear regression (WLR) model to weight pixels based on their temporal decay characteristics. The results demonstrate that IPRA outperforms existing methods (i.e., IRMAD, HM, and TRA) in radiometric consistency, yielding smaller radiometric discrepancies relative to Sentinel-2 MSI. Specifically, NAE decreased by 42.9% (from 0.319 to 0.182), RMSE decreased by 37.3% (from 0.051 to 0.032), PSNR improved from 25.906 dB to 30.195 dB, and the SC value approached the ideal value of 1 (from 1.540 to 1.001). In conclusion, the IPRA method provides a robust solution for normalizing GF-1/6 WFV imagery and thus facilitates its cross-sensor applications. Full article

Cyanobacterial blooms pose a serious threat to freshwater ecosystems, necessitating accurate remote sensing monitoring. Although red-edge bands show potential in terrestrial monitoring, their multi-dimensional features (i.e., spectral, textural, and index-based characteristics) remain underutilized for aquatic blooms. This study leverages the dual red-edge bands (710 nm and 750 nm) of GF-6/WFV to enhance cyanobacterial bloom identification in Lake Taihu. Multi-temporal images from 2019–2023 were used to construct red-edge features in three dimensions: spectral (evaluated via adaptive band selection method) and Jeffries–Matusita–Bhattacharyya distance), texture (based on Gray Level Co-occurrence Matrix and principal component analysis), and indices (nine vegetation indices ranked by Random Forest importance). Twelve feature-combination schemes were designed and implemented with a Random Forest classifier. Results show that red-edge features consistently improve identification accuracy. Quantitatively, compared to the basic four-band (RGBN) combination, the 710 nm band improved spectral separability by an average of 9.63%, whereas the 750 nm band yielded a lower average improvement of 5.69%. Red-edge indices, especially the modified chlorophyll absorption reflectance index 1 (MCARI1) and normalized difference red-edge index (NDRE), exhibited higher importance than non-red-edge indices. All schemes incorporating red-edge features achieved mean overall accuracies of 92.8–94.9% and Kappa coefficients of 0.86–0.94, surpassing the basic four-band scheme. Among these features, red-edge indices contributed most significantly to accuracy gains, increasing the overall accuracy by an average of 0.36–6.06% and the Kappa coefficient by up to 0.06. The enhancement effect of the red-edge 710 nm band features was superior to that of the 750 nm band. This study demonstrates that multi-dimensional red-edge features effectively enhance the identification accuracy of cyanobacterial blooms and provides a methodological reference for operational GF-6 applications in water quality monitoring. Full article

For assessing forest resource quality and carbon sequestration, both optical and synthetic aperture radar (SAR) remote sensing data have been widely used to map forest aboveground carbon storage (AGC), demonstrating considerable potential across diverse forest types. However, the fusion approaches between SAR and optical data remain technically challenging, particularly when combining multi-source optical and multi-temporal SAR datasets. In this study, multiple optical datasets with varying spatial resolutions and spectral bands (Landsat-9, Sentinel-2, GF-6 PMS, and GF-6 WFV) and time-series Sentinel-1 data acquired within the same year were employed to develop an optical–SAR fusion framework for mapping forest AGC in mixed broadleaf–coniferous forests. Firstly, a multi-level collaborative fusion strategy (MLC) was developed using multi-source optical data by integrating the strengths of both pixel-level and feature-level fusion. Subsequently, a multi-temporal SAR combining approach was designed based on seasonal variation patterns using one-year time-series Sentinel-1 data. Finally, an optical–SAR modeling approach was established to map forest AGC using multiple machine learning models combined with the sequential forward feature selection method. The results demonstrate that the proposed MLC fused method for multi-source optical data offers significant advantages in enhancing estimation accuracy and improving model robustness. Furthermore, when multi-temporal Sentinel-1 data were integrated with the MLC-fused optical data, the optical–SAR collaborative approach further improved the coefficient of determination (R²), effectively mitigating the saturation effect commonly observed in optical data. The highest performance was achieved using spring-acquired multi-temporal Sentinel-1 data within the SVR model, yielding an R² of 0.69 and reducing rRMSE to 18.03%. It is indicated that an appropriate fusing strategy for integrating optical and SAR data can substantially enhance both accuracy and reliability in mapping forest AGC. Full article

High accuracy and time synchronous aerosol optical depth (AOD) is essential for atmospheric correction (AC) of medium and high spatial resolution (MHSR) remote sensing data. However, existing high-resolution AOD retrieval methods often rely on sparsely distributed ground-based measurements, which limits their capacity to resolve fine-scale spatial heterogeneity and consequently constrains retrieval performance. To address this limitation, we propose a framework that takes GF-1 top-of-atmosphere (TOA) reflectance as input, where the model is first pre-trained using MCD19A2 as Pseudo-labels, with high-confidence samples weighted according to their spatial consistency and temporal stability, and then fine-tuned using Aerosol Robotic Network (AERONET) observations. This approach enables improved retrieval accuracy while better capturing surface variability. Validation across multiple regions demonstrates strong agreement with AOD measurements, achieving the correlation coefficient (R) of 0.941 and RMSE of 0.113. Compared to models without pretraining, the proportion of AOD retrievals within EE improves by 13%. While applied to AC, the corrected surface reflectance also shows strong consistency with in situ observations (R > 0.93, RMSE < 0.04). The proposed Trans-AODnet significantly enhances the accuracy and reliability of AOD inputs for AC of high-resolution wide-field sensors (e.g., GF-WFV), offering robust support for regional environmental monitoring and exhibiting strong potential for broader remote sensing applications. Full article

The Yangtze River Basin, one of China’s most vital watersheds, sustains both ecological balance and human livelihoods through its extensive lake systems. However, since the 1980s, these lakes have experienced significant ecological degradation, particularly in terms of aquatic vegetation decline. To acquire reliable aquatic vegetation data during the peak growing season (July–September), when clear-sky conditions are scarce, we employed Chinese domestic satellite imagery—Gaofen-1/6 (GF-1/6) Wide Field of View (WFV) and Huanjing-2A/B (HJ-2A/B) Charge-Coupled Device (CCD)—with approximately one-day revisit frequency after constellation networking, 16 m spatial resolution, and excellent spectral consistency, in combination with deep learning algorithms, to monitor aquatic vegetation across the basin. Comparative experiments identified the near-infrared, red, and green bands as the most informative input features, with an optimal input size of 256 × 256. Through visual interpretation and dataset augmentation, we generated a total of 5016 labeled image pairs of this size. The U-Net++ model, equipped with an EfficientNet-B5 backbone, achieved robust performance with an mIoU of 90.16% and an mPA of 95.27% on the validation dataset. On independent test data, the model reached an mIoU of 79.10% and an mPA of 86.42%. Field-based assessment yielded an overall accuracy (OA) of 75.25%, confirming the reliability of the model. As a case study, the proposed model was applied to satellite imagery of Lake Taihu captured during the peak growing season of aquatic vegetation (July–September) from 2020 to 2025. Overall, this study introduces an automated classification approach for aquatic vegetation using 16 m resolution Chinese domestic satellite imagery and deep learning, providing a reliable framework for large-scale monitoring of aquatic vegetation across lakes in the Yangtze River Basin during their peak growth period. Full article

The harmonized multi-sensor satellite data assists users by providing seamless analysis-ready data with enhanced temporal resolution. The Harmonized Landsat Sentinel (HLS) product has gained popularity due to the seamless integration of Landsat OLI and Sentinel-2 MSI, achieving a temporal resolution of 2.8 to 3.5 days. However, applications that require monitoring intervals of less than three days or cloudy data can limit the usage of HLS data. Gaofen-1 (GF-1) Wide Field of View (WFV) data provides the capacity further to enhance the data availability by harmonization with HLS. In this study, GF-1/WFV data is harmonized with HLS by employing deep learning-based conditional Generative Adversarial Networks (cGANs). The harmonized WFV data with HLS provides an average temporal resolution of 1.5 days (ranging from 1.2 to 1.7 days), whereas the temporal resolution of HLS varies from 2.8 to 3.5 days. This enhanced temporal resolution will benefit applications that require frequent monitoring. Various processes are employed in HLS to achieve seamless products from the Operational Land Imager (OLI) and Multispectral Imager (MSI). This study applies 6S atmospheric correction to obtain GF-1/WFV surface reflectance data, employs MFC cloud masking, resamples the data to 30 m, and performs geographical correction using AROP relative to HLS data, to align preprocessing with HLS workflows. Harmonization is achieved without using BRDF normalization and bandpass adjustment like in the HLS workflows; instead, cGAN learns cross-sensor reflectance mapping by utilizing a U-Net generator and a patchGAN discriminator. The harmonized GF-1/WFV data were compared to the reference HLS data using various quality indices, including SSIM, MBE, and RMSD, across 126 cloud-free validation tiles covering various land covers and seasons. Band-wise scatter plots, histograms, and visual image color quality were compared. All these indices, including the Sobel filter, histograms, and visual comparisons, indicated that the proposed method has effectively reduced the spectral discrepancies between the GF-1/WFV and HLS data. Full article

Cloud detection in satellite imagery plays a pivotal role in achieving high-accuracy retrieval of biophysical parameters and subsequent remote sensing applications. Although numerous methods have been developed and operationally deployed, their accuracy over challenging surfaces—such as snow-covered mountains, saline–alkali lands in deserts or Gobi regions, and snow-covered surfaces—remains limited. Additionally, the efficiency of collecting training samples for prevalent deep learning-based methods heavily relies on large-scale pixel-level annotations, which are both time-consuming and labor-intensive. To address these challenges, we propose a Texture-Enhanced Network that integrates an object-oriented dynamic threshold pseudo-labeling method and a texture-feature-enhanced attention module to enhance both the efficiency of deep learning methods and detection accuracy over challenging surfaces. First, an object-oriented dynamic threshold pseudo-labeling approach is developed by leveraging object-oriented principles and adaptive thresholding techniques, enabling the efficient collection of large-scale labeled samples for challenging surfaces. Second, to exploit the spatial continuity of clouds, cross-channel correlations, and their distinctive texture features, a texture-feature-enhanced attention module is designed to improve feature discrimination for challenging positive and negative samples. Extensive experiments on a Chinese GaoFen satellite imagery dataset demonstrate that the proposed method achieves state-of-the-art performance. Full article

Lake Taihu has highly turbid inland waters with complex optical properties. Due to the bottom effect of submerged aquatic plants in optically shallow waters, currently available phytoplankton chlorophyll-a retrieval algorithms tend to overestimate chlorophyll-a concentrations in the eastern part of Lake Taihu. This overestimation can distort the eutrophication evaluation of the entire lake. This paper identifies submerged and emergent plants, determines the retrieval models for the upwelling (K_u) and downwelling (K_d) irradiance attenuation coefficients, and proposes a phytoplankton chlorophyll-a retrieval model using a water depth optimization-based method to remove the bottom effect. The results show the following: (1) The normalized difference vegetation index (NDVI) method can distinguish the bottom mud (NDVI < −0.46) and submerged aquatic plants (−0.46 ≤ NDVI < 0.52) from the emergent plants (NDVI ≥ 0.52) with 90% accuracy. (2) The downwelling and upwelling irradiance attenuation coefficients are highly correlated with the suspended sediments, and retrieval models for these coefficients in three visible bands with high accuracy are presented. (3) Compared to traditional algorithms without bottom effect removal, the proposed chlorophyll-a concentration estimation algorithm based on the water depth-optimized bottom effect removal method efficiently reduces the bottom effect of the submerged aquatic plants. The root mean square error (RMSE) for the obtained chlorophyll-a concentrations decreases from 45.61 ${\mathsf{\mu }\mathrm{g}·\mathrm{L}}^{-1}$ to 8.69 ${\mathsf{\mu }\mathrm{g}·\mathrm{L}}^{-1}$, and the mean absolute percentage error (MAPE) is reduced from 245.12% to 19.58%. In the validation step, the obtained RMSE of 10.89 ${\mathsf{\mu }\mathrm{g}·\mathrm{L}}^{-1}$ and MAPE of 17.52% are consistent with the proposed algorithm. This research provides a good reference for the determination of chlorophyll-a concentrations in phytoplankton in complex inland water bodies. The findings are potentially useful for the operational monitoring of harmful algal blooms in the future. Full article

Wild fires frequently influence fragile karst forest ecosystems in southwestern China. We evaluated the potential of Gaofen Wide Field of View (WFV) imagery for assessing the fire severity of karst forest fires. Comparison with Sentinel Multispectral Imager (MSI) imagery was conducted using 19 spectral indices. The highest correlation for Sentinel-2 MSI is 0.634, while for Gaofen-1 WFV it is 0.583. This is not a significant difference. The burned area index, differenced burned area index, and relative differenced modified soil adjusted vegetation index were the highest performing indices for the Gaofen-1 WFV, while the normalized burn ratio plus, differenced normalized differential vegetation index, and relative differenced normalized differential vegetation index were the best for the Sentinel MSI. The total accuracy evaluation of the fire severity assessment for Gaofen-1 WFV ranged from 40 to 44% and that for Sentinel MSI ranged from 40 to 48%. The difference in accuracy between the two satellites was less than 10%. The RMSE values for all six models were close to 0.6, ranging from 0.58 to 0.67. The fire severity maps derived from both imagery sources exhibited overall similar spatial patterns, but the Sentinel-2 MSI maps are obviously finer. These maps matched well with the unmanned aerial vehicle (UAV) images, particularly at high and unburned severity levels. The results of this study revealed that the performance of the Gaofen WFV imagery was close to that of Sentinel MSI imagery which makes it an effective data source for fire severity assessment in this region. Full article

River channels are fundamental geomorphological and hydrological features that play a critical role in regulating the Earth’s water cycle and ecosystems and influencing human activities. This study utilized Digital Elevation Model (DEM) data and multi-source remote sensing imagery (including GF-1 WFV, Sentinel-1, and Sentinel-2) to determine river channel dimensions. River water masks were obtained from multiple remote sensing imagery sources and processed through triangulation and segmentation to generate river reach results. Based on these segmented river reaches, buffer analysis was conducted. The buffer analysis results were then used to refine and clip the 5 m DEM and 12.5 m DEM datasets. Finally, river channels were extracted from the clipped DEM data using the natural breaks classification method. The classification accuracy was assessed using a confusion matrix. Experimental results demonstrate a high overall classification accuracy, reaching or exceeding 0.985, with classification consistency (Kappa coefficient) ranging from 0.78 to 0.81. The 5 m resolution DEM exhibited superior performance compared to the 12.5 m resolution DEM in river channel extraction, especially regarding the classification consistency (Kappa coefficient), with the 5 m resolution model outperforming the latter. This approach effectively delineates the river channel boundaries, transcends the constraints of a singular data source, enhances the precision and resilience of river extraction, and possesses several practical applications. The extracted data can support analyses of river evolution, facilitate hydrological modeling at the basin scale, improve flood disaster monitoring, and contribute to various other research domains. Full article

Green tide area is a crucial indicator for monitoring green tide dynamics. However, scale effects arising from differences in image resolution can lead to estimation errors. Current pixel-level and sub-pixel-level methods often overlook the impact of morphological differences across varying resolutions. To address this, our study examines the influence of morphological diversity on green tide area estimation using GF-1 WFV data and the Virtual-Baseline Floating macroAlgae Height (VB-FAH) index at a 16 m resolution. Green tide patches were categorized into small, medium, and large sizes, and morphological features such as elongation, compactness, convexity, fractal dimension, and morphological complexity were designed and analyzed. Machine learning models, including Extra Trees, LightGBM, and Random Forest, among others, classified medium and large patches into striped and non-striped types, with Extra Trees achieving outstanding performance (accuracy: 0.9844, kappa: 0.9629, F1-score: 0.9844, MIoU: 0.9637). The results highlighted that large patches maintained stable morphological characteristics across resolutions, while small and medium patches were more sensitive to scale, with increased estimation errors at lower resolutions. Striped patches, particularly among medium patches, were more sensitive to scale effects compared to non-striped ones. The study suggests that incorporating morphological features of patches, especially in monitoring striped and small patches, could be a key direction for improving the accuracy of green tide monitoring and dynamic change analysis. Full article

The spatial prediction of soil CO₂ flux is of great significance for assessing regional climate change and high-quality agricultural development. Using a single satellite to predict soil CO₂ flux is limited by climatic conditions and land cover, resulting in low prediction accuracy. To this end, this study proposed a strategy of multi-source spectral satellite coordination and selected seven optical satellite remote sensing data sources (i.e., GF1-WFV, GF6-WFV, GF4-PMI, CB04-MUX, HJ2A-CCD, Sentinel 2-L2A, and Landsat 8-OLI) to extract auxiliary variables (i.e., vegetation indices and soil texture features). We developed a tree-structured Parzen estimator (TPE)-optimized extreme gradient boosting (XGBoost) model for the prediction and spatial mapping of soil CO₂ flux. SHapley additive explanation (SHAP) was used to analyze the driving effects of auxiliary variables on soil CO₂ flux. A scatter matrix correlation analysis showed that the distributions of auxiliary variables and soil CO₂ flux were skewed, and the linear correlations between them (r < 0.2) were generally weak. Compared with single-satellite variables, the TPE-XGBoost model based on multiple-satellite variables significantly improved the prediction accuracy (RMSE = 3.23 kg C ha⁻¹ d⁻¹, R² = 0.73), showing a stronger fitting ability for the spatial variability of soil CO₂ flux. The spatial mapping results of soil CO₂ flux based on the TPE-XGBoost model revealed that the high-flux areas were mainly concentrated in eastern and northern farmlands. The SHAP analysis revealed that PC2 and the TCARI of Sentinel 2-L2A and the TVI of HJ2A-CCD had significant positive driving effects on the prediction accuracy of soil CO₂ flux. The above results indicate that the integration of multiple-satellite data can enhance the reliability and accuracy of spatial predictions of soil CO₂ flux, thereby supporting regional agricultural sustainable development and climate change response strategies. Full article

A panchromatic and multispectral sensor (PMS) and a wide-field-of-view (WFV) sensor were fitted aboard the Gaofen6 (GF6) satellite, which was launched on 2 June 2018. This study used the Landsat9-Operational Land Imager 2 and Sentinel2-Multispectral Instrument as reference sensors to perform radiometric cross-calibration on GF6-PMS and WFV data at the Dunhuang calibration site. The four selected sensor images were all acquired on the same day. The results indicate that: the calibration results between different reference sensors can be controlled within 3%, with the maximum difference from the official coefficients being 8.78%. A significant difference was observed between the coefficients obtained by different reference sensors when spectral band adjustment factor (SBAF) correction was not performed; from the two sets of validation results, the maximum mean relative difference in the near-infrared band was 9.46%, with the WFV sensor showing better validation results. The validation of calibration coefficients based on synchronous ground observation data and the analysis of the impact of different SBAF methods on the calibration results indicated that Landsat9 is more suitable as a reference sensor for radiometric cross-calibration of GF6-PMS and WFV. Full article