Search Results (8)

Background/Objectives: The objective of this study was to investigate the internal morphology and root canal configurations (RCCs) of maxillary central incisors (MxCIs) in a Swiss–German population by means of micro-computed tomography (µCT). Methods: RCCs, main foramina, and accessory canals of MxCIs were examined using µCT and 3D imaging software. The root canal anatomy was classified according to three classification systems by Vertucci (Ve, 1984), Weine et al. (We, 1969), and Briseño-Marroquín et al. (Br, 2015). Results: The most common RCC observed among a total of 112 investigated single-rooted maxillary central incisors was Br 1-1-1/1 (97.3%, Ve I, We I), with a small percentage showing Br 1-1-1/2 (2.7%). One main foramen existed in 87.5% of the specimens, 8% had one accessory foramen, 3.5% had two, and a rare case had four accessory foramina (0.9%). Accessory root canals were mainly located in the middle and apical regions of the roots. Conclusions: Detailed insights into the root canal morphology of MxCIs in a Swiss–German population are provided. The predominant RCC was a simple root canal (Ve I, Br 1-1-1/1). However, accessory canals were detected in the middle and apical third in over 40% of the teeth examined. These anatomical features should be considered during endodontic treatment planning and execution. Full article

The aim of this study was to investigate the root canal morphology of lower second molars in the Croatian subpopulation of the Zagreb region using cone-beam computed tomography (CBCT). We analyzed 3212 CBCT scans from the two radiology centers in Zagreb. The number of roots and root canals, the occurrence of C-shaped canals and additional roots were recorded. “C”-shaped roots were classified according to Melton classification. Canals in the mesial root were classified according to Vertucci. Lower second molars were found on 608 CBCT scans from a total number of 859. Among them, 78 (9.1%) had a “C”-shaped form. In the mesial roots, the frequencies of Vertucci types were: Type I in ninety-four cases (12.0%), Type II in three hundred and twenty cases (41.0%), Type III in six cases (0.8%), Type IV in three hundred and fifty-two cases (45.1%), Type V in three cases (0.4%), Type VI was found in four cases (0.5%) and Type VIII was found in one case (0.1%). Radix entomolaris and paramolaris were found in 29 (3.4%) lower second molars. The lower second molars in the Zagreb population show significant diversity in internal anatomy with a relatively high prevalence of “C”-shaped root canals and merged root canals in the mesial root. Full article

The present study aimed to measure and compare anatomic parameters in contralateral maxillary second molars. A total of 18 intact maxillary second molar pairs (n = 36) extracted from 18 patients were scanned with micro-computed tomography (micro-CT) and then reconstructed. Axial, sagittal, and cross-sectional slices were used to analyze the parameters (lengths, widths, and thicknesses) and evaluate the symmetry of the right and left sides. The number of root canals and their internal patterns were classified following Vertucci’s classification. The number of lateral canals and their locations were also noted. Contralateral second molar pairs demonstrated a high degree of similarity in terms of the linear measurements (lengths, widths, and thicknesses). The root canal anatomy configuration symmetry of mesiobuccal, distobuccal, and palatal roots according to Vertucci’s classification were 41.1%, 88.2%, and 94.4%, respectively. In total, 41.6% of mesiobuccal roots, 2.7% of distobuccal roots, and 30.6% of palatal roots had at least one lateral canal. The apical third (38.7%) was the most frequent location of lateral canals, followed by the middle third (32.3%) of the root. This study provides insight into the anatomy of the root canals of contralateral maxillary second molars, which is valuable for both practitioners and researchers. Full article

The objective of this paper is to assess the prevalence of a second canal in maxillary and mandibular premolars based on two classification systems of root canal morphology using Cone beam computed tomography (CBCT) images. A total of 286 CBCT scans from the archive of the Radiology department of a hospital were assessed for the presence of a second canal in maxillary and mandibular premolars. The canal configuration and its assessment was undertaken using Vertucci and Ahmed’s classification. A Chi-square test was used to test the significance of the difference between gender and age. A total of 286 premolars were examined (217 mandibular premolars and 69 maxillary premolars); of these, 173 teeth (60.5%) were from males and 113 were from females (39.5%). Some 62% of maxillary left first premolars had two roots, followed by maxillary right first premolars (47%), and then maxillary left second premolars (30%) and maxillary right ones (27%), respectively. Type IV Vertucci were seen in maxillary premolars, while type I were ordinarily seen in the included mandibular premolars. Surprisingly, Vertucci type III was only found in mandibular left first premolars at a frequency of 2%. One orifice with two separate canals and two orifices of two distinct canals with two portals of exit were predominantly noticed with maxillary first premolars (² FP B¹ P¹) in 73% and 81%, respectively, followed by (¹ FP ²) 19%. The prevalence of a second canal in maxillary and mandibular premolars was low in the investigated premolars in comparison to the premolars that had just one root and canal, as assessed based on Vertucci and Ahmed’s root canal system classification. Full article

Adequate knowledge of root canal morphology along with its probable variations is imperative to acquire successful endodontic treatment. This retrospective cross-sectional study aimed to investigate the root canal configuration of maxillary and mandibular first molar using Cone-Beam Computed Tomography (CBCT) among patients in Al-Ahsa region, Saudi Arabia. A total of 377 samples were included, out of which 123 CBCT (I-CAT Vision QTM) scans with intact all first permanent molars were selected in this study and scanned in sagittal, axial, and coronal views by using BlueSkyPlan software. The number of canals in each root and their configuration according to the Vertucci classification system was evaluated. Statistical analysis was analyzed using SPSS version 21 (IBM). Chi-square test was applied to evaluate the association of root canal morphology and mandibular and maxillary first molars with respect to gender. Out of 123 CBCT scans, 59 (48.0%) were males and 64 (52.0%) were females; the mean age was 26.95 ± 10.65 years. The mesiobuccal root of bilateral maxillary first molar had Type-I (87.0%) of Vertucci classification followed by Type-IV (9.8%). Additionally, all mesiobuccal roots (100%) of the left mandibular first molar had Type-I of Vertucci’s classification. A significant association has been observed between gender and a number of canals in bilateral maxillary first molars. Females showed a significantly higher prevalence of three-root canal configuration in maxillary first molars of both sides compared four canals found most commonly in males (p = 0.004). This study concluded that the majority of maxillary and mandibular permanent first molars had three roots and three canals with Type-I Vertucci’s classification in patients belonging to the Al-Ahsa region of the Saudi Arabia. It was also proved that gender is significantly associated with the number of canals in a bilateral maxillary molar. Full article

The aim of this paper is to review the literature on root canal configuration (RCC) and the frequency of occurrence of a second mesiobuccal canal (MB) in human permanent maxillary first molars where cone-beam computed tomography (CBCT) is used. Online electronic databases such as PubMed-Medline, Embase, Scopus and Cochrane Library were searched using appropriate keywords from the earliest available date until 12th June 2022, without restriction on language. In the mesiobuccal root, type I was the most frequent (33.29%), followed by types II and IV (27.18% and 26.36%, respectively). Moreover, 68.2% of maxillary first molars had a second MB canal. For both the distobuccal and palatal roots, type I was the most prevalent, with 99.08% and 97.83% occurrence, respectively. All other types were infrequent. Type I RCC is most frequent in all the roots of the maxillary first molars. Hence, care must be taken during biomechanical preparation of the MB roots. Full article

This systematic review’s objective was to conduct a complete analysis of the literature on the root canal morphology using advanced micro-computed tomography. The electronic web databases PubMed, Scopus, and Cochrane were examined for research papers concerning the chosen keywords, evaluating the root canal morphology using Micro-CT, published up to 2021. The articles were searched using MeSH keywords and searched digitally on four specialty journal websites. DARE2 extended (Database of Attributes of Reviews of Effects) was used to assess bias risk. The information was gathered from 18 published studies that strictly met the criteria for inclusion. In the included studies, a total of 6696 samples were studied. The studies were conducted on either maxillary (n-2222) or mandibular teeth (n-3760), permanent anteriors (n-625), and Third molars (n-89). To scan samples, a Scanco Medical machine in was used in 10 studies, Bruker Micro-CT in 34, and seven other machines were utilized in the rest. Bruker Micro-CT software from Kontich, Belgium, VG-Studio Max 2.2 software from Volume Graphics, Heidelberg, Germany, was the most commonly used software. The minimum Voxel size (resolution) adopted in the included studies was 11.6 µm. However, 60 µm was the maximum. Most studies classified the root canal morphology using Vertucci’s classification system (n-16) and the four-digit system (n-6). Full article

This study aimed to investigate variations in the root canal morphology of maxillary second premolar (MSP) teeth using microcomputed tomography (micro-CT). Sixty (N = 60) human extracted MSPs were collected and prepared for micro-CT scanning. The duration for scanning a single sample ranged between 30 and 40 min and a three-dimensional (3-D) image was obtained for all the MSPs. The images were evaluated by a single observer who recorded the canal morphology type, number of roots, canal orifices, apical foramina(s), apical delta(s), and accessory canals. The root canal configuration was categorized in agreement with Vertucci’s classification, and any configuration not in agreement with Vertucci’s classification was reported as an “additional canal configuration”. Descriptive statistics (such as mean percentages) were calculated using SPSS software. The most common types agreeing with Vertucci’s classification (in order of highest to lowest incidence) were types I, III, V, VII, II, and VI. The teeth also exhibited four additional configurations that were different from Vertucci’s classification: types 2-3, 1-2-3, 2-1-2-1, and 1-2-1-3. A single root was found in 96.7% and the majority of the samples demonstrated two canals (73.3%). Further, 80% of the teeth showed one canal orifice. The number of apical foramina’s in the teeth was variable, with 56.7% having solitary apical foramen. The accessory canal was found in 33.3%, and apical delta was found in only 20% of the samples. Variable morphology of the MSPs was detected in our study. The canal configuration most prevalent was type 1; however, the results also revealed some additional canal types. Full article