Search Results (6)

This article presents the decision feedback equalizer (DFE), the maximum likelihood detection (MLD), and the radius-directed equalization (RDE) algorithms designed in MATLAB-R2018a to equalize the received signal in a dispersive optical link up to 120 km. DFE is essential for improving signal quality in several communication systems, including WiFi networks, cable modems, and long-term evolution (LTE) systems. Its capacity to mitigate inter-symbol interference (ISI) and rapidly adjust to channel variations renders it a flexible option for high-speed data transfer and wireless communications. Conversely, MLD is utilized in applications that require great precision and dependability, including multi-input–multi-output (MIMO) systems, satellite communications, and radar technology. The ability of MLD to optimize the probability of accurate symbol detection in complex, high-dimensional environments renders it crucial for systems where signal integrity and precision are critical. Lastly, RDE is implemented as an alternative algorithm to the CMA-based equalizer, utilizing the idea of adjusting the amplitude of the received distorted symbol so that its modulus is closer to the ideal value for that symbol. The algorithms are tested using a converged 5G mm-wave analog radio-over-fiber (A-RoF) system at 60 GHz. Their performance is measured regarding error vector magnitude (EVM) values before and after equalization for different optical fiber lengths and modulation formats (QPSK, 16-QAM, 64-QAM, and 128-QAM) and shows a clear performance improvement of the output signal. Moreover, the performance of the proposed algorithms is compared to three commonly used algorithms: the simple least mean square (LMS) algorithm, the constant modulus algorithm (CMA), and the adaptive median filtering (AMF), demonstrating superior results in both QPSK and 16-QAM and extending the transmission distance up to 120 km. DFE has a significant advantage over LMS and AMF in reducing the inter-symbol interference (ISI) in a dispersive channel by using previous decision feedback, resulting in quicker convergence and more precise equalization. MLD, on the other hand, is highly effective in improving detection accuracy by taking into account the probability of various symbol sequences achieving lower error rates and enhancing performance in advanced modulation schemes. RDE performs best for QPSK and 16-QAM constellations among all the other algorithms. Furthermore, DFE and MLD are particularly suitable for higher-order modulation formats like 64-QAM and 128-QAM, where accurate equalization and error detection are of utmost importance. The enhanced functionalities of DFE, RDE, and MLD in managing greater modulation orders and expanding transmission range highlight their efficacy in improving the performance and dependability of our system. Full article

This study proposes a universal adaptive control algorithm for an unknown multi-input multi-output (MIMO) system using recursive least squares (RLS) and parameter self-tuning. The issue of adjusting the control and system parameters in response to changes in the platform was discussed. The development of a control algorithm that can consistently achieve reliable and robust control performance in various systems is important. This study aimed to develop a control algorithm that can track the reference value for any unknown MIMO system. For the controller design, an nth-order differential error dynamic model was designed, and an RLS with a scale factor was used to estimate the coefficients of the error dynamics. In the current scenario, the numbers of control inputs and error states in the error dynamics were assumed to be equal. It was designed such that the control input is derived based on the Lyapunov stability concept using the estimated coefficients. The scale factor in the RLS and injection term in the control input based on the sliding-mode approach were computed using a self-tuning methodology. The performance of the proposed universal adaptive control algorithm was evaluated using an actual DC motor and CarMaker (version 8.1.1) software tests under various scenarios. Full article

Multiple-input–multiple-output (MIMO) communication systems utilize multiple transmitters to send different pieces of information in parallel. This offers a promising way to communicate at a high data rate over bandwidth-limited underwater acoustic channels. However, underwater acoustic MIMO communication not only suffers from serious inter-symbol interference, but also critical co-channel interference (CoI), both of which degrade the communication performance. In this paper, we propose a new framework for underwater acoustic MIMO communications. The proposed framework consists of a CoI-cancellation-based channel estimation method and channel-estimation-based decision feedback equalizer (CE-DFE) with CoI cancellation functionalities for underwater acoustic MIMO communication. We introduce a new channel estimation model that projects the received signal to a specific subspace where the interference is free; therefore, the CoI is cancelled. We also introduce a CE-DFE with CoI cancellation by appending some filters from traditional CE-DFE. In addition, the traditional direct adaptive decision feedback equalization (DA-DFE) method and the proposed method are compared in terms of communication performance and computational complexity. Finally, the sea trial experiment demonstrates the effectiveness and merits of the proposed method. The proposed method achieves a more than 1 dB of output SNR over traditional DA-DFE, and is less sensitive to parameters. The proposed method provides a new approach to the design of robust underwater acoustic MODEM. Full article

The use of digital signal processors (DSP) to equalize coherent optical communication systems based on spatial division multiplexing (SDM) techniques is widespread in current optical receivers. However, most of DSP implementation approaches found in the literature assume a negligible mode-dependent loss (MDL). This paper is focused on the linear multiple-input multiple-output (MIMO) receiver designed to optimize the minimum mean square error (MMSE) for a coherent SDM optical communication system, without previous assumptions on receiver oversampling or analog front-end realizations. The influence of the roll-off factor of a generic pulse-amplitude modulation (PAM) transmitter on system performance is studied as well. As a main result of the proposed approach, the ability of a simple match filter (MF) based MIMO receiver to completely eliminate inter-symbol interference (ISI) and crosstalk for SDM systems under the assumption of negligible MDL is demonstrated. The performance of the linear MIMO fractionally-spaced equalizer (FSE) receiver for an SDM system with a MDL-impaired channel is then evaluated by numerical simulations using novel system performance indicators, in the form of signal to noise and distortion ratio (SNDR) loss, with respect to the case without MDL. System performance improvements by increasing the transmitter roll-off factor are also quantified. Full article

This paper provides a technical review regarding the latest progress on multi-input multi-output (MIMO) digital signal processing (DSP) equalization techniques for high-capacity fiber-optic communication networks. Space division multiplexing (SDM) technology was initially developed to improve the demanding capacity of optic-interconnect links through mode-division multiplexing (MDM) using few-mode fibers (FMF), or core-multiplexing exploiting multicore fibers (MCF). Primarily, adaptive MIMO filtering techniques were proposed to de-multiplex the signals upon different modes or cores, and to dynamically compensate for the differential mode group delays (DMGD) plus mode-dependent loss (MDL) via DSP. Particularly, the frequency-domain equalization (FDE) techniques suggestively lessen the algorithmic complexity, compared with time-domain equalization (TDE), while holding comparable performance, amongst which the least mean squares (LMS) and recursive least squares (RLS) algorithms are most ubiquitous and, hence, extensively premeditated. In this paper, we not only enclose the state of the art of MIMO equalizers, predominantly focusing on the advantage of implementing the space–time block-coding (STBC)-assisted MIMO technique, but we also cover the performance evaluation for different MIMO-FDE schemes of DMGD and MDL for adaptive coherent receivers. Moreover, the hardware complexity optimization for MIMO-DSP is discussed, and a joint-compensation scheme is deliberated for chromatic dispersion (CD) and DMGD, along with a number of recent experimental demonstrations using MIMO-DSP. Full article

Compared with single-input multiple-output (SIMO) radar, colocated multiple-input multiple-output (MIMO) radar can detect moving targets better by adopting waveform diversity. When the colocated MIMO radar transmits a set of orthogonal waveforms, the transmit weights are usually set equal to one, and the receive weights are adaptively adjusted to suppress clutter based on space-time adaptive processing technology. This paper proposes the joint design of space-time transmit and receive weights for colocated MIMO radar. The approach is based on the premise that all possible moving targets are detected by setting a lower threshold. In each direction where there may be moving targets, the space-time transmit and receive weights can be iteratively updated by using the proposed approach to improve the output signal-to-interference-plus-noise ratio (SINR), which is helpful to improve the precision of target detection. Simulation results demonstrate that the proposed method improves the output SINR by greater than 13 dB. Full article